|
| 1 | Part A Civil work |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal ofexcavated earth, lead upto 50m andlift upto 1.5 m , disposed earth to be levelled and neatly dressed:All kinds of soil |
| 3 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 4 | Random Rubble stone masonary for foundation and plinth in Cement Sand Mortar above 30 Cm. thick wall in : Cement Mortar 1:6 (1-Cement:6-Sand). |
| 5 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 6 | Half brick masonry in Superstructure , above plinth level upto floor Vlevelusing bricks of designation 75 Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 7 | Add extra providingand placing in position 2 Nos. ,6mm Ø M.S. barat every thirdcourse of half brick masonry . |
| 8 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20mm thick. |
| 9 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases of columns etc. |
| 10 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor five level for : Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates,anchorblocks,sills,chhajjas,lintel,beam, plinth beam etc. |
| 11 | Providing and laying in position specified grade ofcement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (as required ) excluding the cost of centering, shuttering and reinforcementfor Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.M20 grade Nominal Mix / Design Mix |
| 12 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code) |
| 13 | Providing and laying in position specified grade ofcement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( as required) excluding the cost of centering, shuttering and reinforcementfor Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.M20 grade Nominal Mix / Design Mix |
| 14 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: Newwork(twoormorecoats)overandincludingscrappingandprimingcoatwithcement primer. |
| 15 | Finishing wall with water proofing cement paint of approved brand and manufacture and or required shadetogive an even shade including all scaffolding:New work (Two or more coats applied @ 3.84 kg/10 sqm).Front wall Mango colour |
| 16 | Providing and laying Ceramic MAT floor tiles(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown of any size, laid on 20 mm thickbed of cement mortar 1:4 (1 cement : 4 coarse sand)including pointing in white cementmixed with pigment of matching shade complete. |
| 17 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in charge in skiriting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white mixed with pigment of matching shade complete. Category - I : Kajariya, Jhonson, Orient, Somani make etc. |
| 18 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4(1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 60x60 cm |
| 19 | Providing & laying broken glazed titles on roof ( broken glazed tilesnot less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg ofVG-40 (30/40 )grade and 0.30 Kg/Sqm. OfVG-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compound all complete as per direction of Engineer-in-charge. |
| 20 | Providing gola (bata) in lime concrete using 50% lime surkhi/sand mortar 1:2 with grit along joint of walls and terrece finished with lime mortar 1:2 plaster with Gur, Gugal, Methi etc in concave shape of size: 75mmx75mm |
| 21 | Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basicitem.) With glass panes of 4.0 mm thickness ( weight not less than 10.0 kg/sqm) as per IS : 2835. |
| 22 | Grading roof for water proofing treatment withwater profing compoundCement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 23 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia |
| 24 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: |
| 25 | Bend 87 .5 110mm dia |
| 26 | Pipe Clip 110mm dia |
| 27 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesinin glue both sides with approved steel fittings complete as per annexure \"A\": 30 mm thick . Decorative teakveneer One side |
| 28 | Providing and fixing pressed steel door frames confirming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applyinga coat of approved steel primer after pre-treatment of the surface including filling with CC 1:2:4(M15 grade) complete as directed by Engineer-in-charge : Profile B |
| 29 | Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and lead upto 1.5mtr |
| 30 | Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 gauge thickness, joint mitred weldedand grinded including hold fast of steel lugs 13mm x 3mm and 15 Cm long embedded in C Cblock 15 x 10 x 10 Cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of superior quality, window shutters made out of 50 x 25.0 mm hollow steel section 15 mm paitam of 18 gauge thickness, joint mitred and grinded including 10mm x 10mm square bars welded to framefor paitam fixing float glass 4mm thickpanes with glazing clips and metal sash putty andfixing of shutters frames peg stay, U shape handle 100 mm long, tower bolts 100 mm long of steel powder coated superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respect as per direction of Engineer-in –charge Window openable. |
| 31 | Supplying and fixing fixed wire gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150 mm distance. 14 mesh x 24 gauge |
| 32 | Providing and fixing Square bars or other flat welded to window, ventilatiors etc. |
| 33 | Providing&fixingprecastcementconcretecoping1:2:4mix50mmthickcompleteas per specification : |
| 34 | Providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth complete |
| 35 | Providing and fixing Granite stone slab mirror polished and machine edge cut in Walls, Pillars, Steps, Shelves, Sills, Counters. Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 jointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with pigment to match the shade of the marble slab complete including grinding, rubbing and polishing of: \"Green / Black(Madras)/otherAbove 3601 Cm2 Slabs |
| 36 | Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : Two or more coats on new work |
| 37 | CARRIAGE OF MATERIALS Earth, Sand, Lime, Morrum manure or sludge For 5 Km. |
| 38 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles includingrubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) |
| 39 | Providing and injection Chloropyrifous Emulsifiableconcentrate 20 % with 1 % concentration for PRE-CONSGTRUCTIONAL Anti termite treatment as per IS 6313 part III and amended from time to time and creating a continous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which aproch is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment And Excluding the cost of Chemical Emulsion.) Heptachlor E.C. 20% with 1% concentration. |
| 40 | Supply & fixing of stainless steel pipe railing for ramp / Staircaserailing height, 90 cm. with 50 mm dia stainless steel pipe with 18 gauge with drop (vertical post) at 90 cm. C/C and intermidiate3 Nos 20 mm dia horizontal pipe with suitable height of same gauge with coupling, grinding and polishing & fix of master pieces as per required point as per approved design of Engineer incharge |
| 41 | Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite Work |
| 42 | Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of T-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension). |
| 43 | 6 mm thick cement plaster to ceiling of mix1:3 (1cement : 3-fine sand) |
| 44 | Supplying and fixing in walls machine cut and polished stone shelves, tands andin CM 1:3 with machine cut edges : Sand or other approved stone 25mm thick. |
| 45 | Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete For area of each slab upto 2001Sqcm |
| 46 | Part B Sanitary work |
| 47 | P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm. |
| 48 | P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor |
| 49 | P & F High Level Flushing Cistern of 10 litres capacity of approved make including C.I. brackets duly painted, chain & pull and 32 mm dia G.I. concealed flush pipe with M.S. clamps, 20 mm dia G.I. overflow pipe upto 185 cm. Long, brass ball cock (IS :1703 Mark) with PVC ball and internal fittings and mosquito proof coupling, complete including cutting and making good the wall. White PVC (IS: 7231 Mark). |
| 50 | P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. |
| 51 | P & F water closet Seat Covers with brass hinges complete : Solid PVC (IS 2548 marked) grade-I Black for EWC. |
| 52 | P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make,25 mm G.I. waste pipe complete including cutting & making good the wall.: Size 550 mm x 400 mm |
| 53 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked) |
| 54 | do- with 37 cm long pipe and nut. |
| 55 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: Brass 400 grm,15mm nominal bore. |
| 56 | P & F Looking Mirrors with P.V.C. frame of approved (Atul, ModiGuard , Saint Gobin or equivalent) Oval shape 450x350 mm |
| 57 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps(IS 1239 mark), including cutting and making good the walls etc. Iinternal work - : Medium Duty Pipes Exposed on wall |
| 58 | 15 mm dia nominal bore\"B\" Class |
| 59 | 25mm dia nominal bore\"B\" Class |
| 60 | ProvidingandfixingG.I.pipescompletewithG.I.fittings (IS1239mark)includingtrenchingandrefillingetc.(externalwork):Medium Duty Pipes |
| 61 | 15mm dia nominal bore \"B\" Class |
| 62 | 25mm dia nominal bore\"B\" Class |
| 63 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating theBIS license No),of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity. |
| 64 | Hoisting Charges for each floor : For items 2.26.1 to 2.26.4 |
| 65 | P & F Ball Cock (IS :1703 Mark) with Rod& P.V.C. Ball complete : Brass wt.400 gm,15mm. |
| 66 | Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. Depth up to 0.5 M |
| 67 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. |
| 68 | Inside size 300 X 300 mm depth upto 0.5 MCement cover with frame. |
| 69 | do- size 450 x 450mm depth upto0.5 M Cement cover with frame |
| 70 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : |
| 71 | Gun-metal 15mm nominal bore. |
| 72 | Gun-metal 25mm nominal bore. |
| 73 | P & F Kitchen & Lab. Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor :1.0 mm thick Salem stainless steel AISI -304 & IS 13983-1994kitchen sink of approved make (Nirali, Neel – kanth, Jaina, Faber-Castell )with large waste coupling. 22 x 18 x 720x16x7 |
| 74 | Construction of Soakage well in all types of soil of approved drawing, top 1.5 Mtr. depth in 345 mm thick brick masonary with CM 1:6, 80mm thick stone slab covering resting on stone lintel of cross section 150 x 300mm (two numbers resting on stone bed plate), jointing of slab in CM 1 : 3, Ralthal, Kharanja 40 mm thick M-15 grade C.C. flooring, out side plaster in CM 1 : 6 upto 450 mm depth, earth work etc complete including disposal of surplus earth within a lead of 50 Mtr. including providing and fixing of PVC Vent pipe 75mm dia upto 1.50 Mtr. height as per direction of Engineer in Charge including making connection etc. 3 Mtr. outer dia in top 1.50 M depth and 90 Cm dia at bottom. Depth of soakage well 10 to 12 Mtr. from ground level. [As per Bikaner Practice]. |
| 75 | Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja,50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cementcover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:-Size 230 x110 x150 cm.(for 20 users) |
| 76 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make |
| 77 | 75 mm dia |
| 78 | 110 mm dia |
| 79 | Construction of Cement Concrete Chamber 125mm dia. Stainless Steel Sheet Grating |
| 80 | Construction of Open SurfaceDrain with 112mm thick brick masonry in CM 1:4,110mm thick base concrete 1:5:10, 37mm thick M-15 grade C.C. flooring ,12mm 1:4 cement plaster on all exposed faces of walls including top surface excavation & disposal of earth complete as per approved design/drawing: 250mm drain,300mm Av. depth |
| 81 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make |
| 82 | Door Bend 87.5 Dg. |
| 83 | 75mm dia |
| 84 | 110mm dia |
| 85 | Single Push Fit Coupler |
| 86 | 75mm dia |
| 87 | 110mm dia |
| 88 | Vent Cowel110mm dia |
| 89 | Nahni Trap with Jali 4” 110mm dia |
| 90 | Pipe Clip |
| 91 | 75mm dia |
| 92 | 110mm dia |
| 93 | Part C Boundary wall and outer development |
| 94 | Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal ofexcavated earth, lead upto 50m andlift upto 1.5 m , disposed earth to be levelled and neatly dressed:All kinds of soil |
| 95 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 96 | Random Rubble stone masonary for foundation and plinth in Cement Sand Mortar above 30 Cm. thick wall in : Cement Mortar 1:6 (1-Cement:6-Sand). |
| 97 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 98 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20mm thick. |
| 99 | Finishing wall with water proofing cement paint of approved brand and manufacture and or required shadetogive an even shade including all scaffolding: New work (Two or more coats applied @ 3.84 kg/10 sqm). |
| 100 | Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : Two or more coats on new work |
| 101 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 102 | Providing and layingfactory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-incharge.General specification of blocks:1) Shape as defined by Engineer incharge2) Tensile splitting strength and braking load as per BS 6717:20013) Color: Grey cement natural colour4) Variation in dimension: Less than 1.6mm.5) Variation in thickness: Less than 3.2mm6) Abrasion: As per BS: 6717:2001 80 mm thick |
| 103 | Providing and fixing cow catcher made of R.S. joist angles channels MS rounds including cutting welding and fabrication with priming coat of red oxide (as per design). |
| 104 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-voilet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall confoim to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 5.0mm thick (Wt. 8.4 Kg./Mtr. Sq.) |
| 105 | Part D Stancil work |
| 106 | Making of Health Wellness Centre Pattern (Gola) including colour picture work inside for façade branding incl. material, labour & T&P as per direction of Engineer-in-charge. As per standerd drawing/ pattern |
| 107 | Making of Border of Window for health wellness center as per given pattern for façade branding including material, labour & T&P as per direction of engineering incharge upto window size 4\"*5.6\" as per standard drawing/pattern. |
| 108 | Part -E (Electric Work) |
| 109 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI marked medium duty PVC conduit & it\"s accessories, round tiles,Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch,Modular plate with grid plate,screws,making connections, testing etc. as required. Group1 |
| 110 | Short point (up to 3 mtr.) |
| 111 | Medium point (up to 6 mtr.) |
| 112 | Long point(up to 10 mtr..) |
| 113 | Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal sizeFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved makein surface / recessed ISI marked medium duty PVC conduit & it\"s accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modularswitch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required.Group1 On board |
| 114 | Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost ofmodular 16 amp. Switch and socket outlet, making connection , testing , etc. as required.Group1 |
| 115 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required.Group1 |
| 116 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 117 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 118 | 2 x 6.0 sq. mm. + 1 x 2.5 sq. mm. |
| 119 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar, conforming to IS13032 & IS8623 including making internal DBterminations with copper lugs , testing etc. as required.G1 Double door (single phase) 16 Way |
| 120 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.GROUP 1Single pole MCB 6 A to 32 A rating |
| 121 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required includingcutting the wall and making good the same as required.GROUP 1 |
| 122 | 20 mm |
| 123 | 25 mm |
| 124 | P & F phenolic laminated sheet 2.0 mm thick of size 75 mm dia. Including screws, cup washer as required. |
| 125 | P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required 5 step fan regulator 2 ModuleGroup1 |
| 126 | Making of hole in wall of required size for housing exhaust fan and making good the same, with cement plaster as required of following size: Up to 457 mm size |
| 127 | P & F 18 swgM.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm,12 mm dia rod fan hook with 100 mmlength extended on each side . |
| 128 | P&F of Heavy duty capacitor start 900/1400 RPM single phase ISI marked Exhaustfan,IS:2312 marked in existing opening including making connections testing etc. as required.GROUP 1 300 mm sweep(900/1400 RPM) |
| 129 | P & F of Gravity Louver shutter of superior quality made out of frame of18 swg M.S. sheet & Louvers made from 24 swg MS Sheetwith enamel paint including cost of nuts, bolts, etc as reqd. Up to 380 mm size |
| 130 | P & F of IP 20 LED tube light 20 watt with external batten made from CRCA sheet steel suitable to replace T-B/T-12 tube light, integral driver, 2000 luman + 5olo tolerarrce system luman efficiacy of 100 Lm/ watt minimum expected life time of 25000 burning hours, CCT 5700 I( ANSI, CRI 80, driver efficiency >850/o, Life expectancy of driver rnin 30000 hrs. PF 0,95 at full load/ 230 volt AC.Group1 |
| 131 | P & F double ball bearing capacitor start, aluminium body & blade ceilingfanwith down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. 1200 mm sweep Group1 |
| 132 | P&F of Double ball bearing, capacitor startsingle phase metallicblade fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testing etc. as required.Group1 225 mm sweep |
| 133 | P&F of recessed mounting heavy duty sheet steel End Box for distribution boerd duly phophatised powder coated complete as requiredGroup 1 For TPN 6way DB |
| 134 | P/Laying P.V.C. insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I of Group2of approved makein ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick underlayer ofsand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.GROUP 1 (armoured) In existing RCC/HUME/STONEWARE PIPE 10.0 Sq.mm 2 core |
| 135 | Mainteneance free Gel Earthing with copper Earth ectrode of size50 mm x 2 m by embodying 2.5 mtr. below the ground level with 20 mm dia. G.I. \"B\" class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and c.c finished chamber coverd with hinged type with locking arraangment C.I cover ,C.I frame of size 300mm x 300mm complete with filling of ash gel compound (dharken or equivelent approved make), testing of earth resistance as required. with Strip in Pipe Technology with 80 - 100 micron GI CoatingGI pipe 2000 mm long , 63 / 80 mm , Inner strip 50 mm x 3 mm copper |
| 136 | S & Laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 8 SWG copper wire |
| 137 | P & F IP-65 / IP-66 protected LED street light luminaire on existing bracket. Fixture made from powder coated single piece pressure die cast aluminium housing with Heat dissipation fins on housing with High Power LEDs of CREE / NICHIA / OSRAM / PHILIPS make. DIffuser / Glass cover for ensuring IP65 protection for Lamp & control gear compartment, System Lumen output of 1500 - 8500 High Power LED. Integrated Driver shall be high efficiency having efficiency > 85% and in compliance to IEC standardsSystem life of 25,000 Burning Hours with 70% of initial Lumens maintained. Fixture shall be inCE Compliance.Gr1 IP - 65 Protected LED Street Light Luminaire LED Street Light fixture 20-25 Watt |
| 138 | S & F of Street light bracket made out from following size of \" B \"class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required. |
| 139 | 25 mm Dia. |
| 140 | P & F ISI markedding dong/musical chime bell including making connection testing etc. as required. |
| 141 | P&F metal clad industrial plug top & socket unit with pin and sleeve type contact on porcelain/ bakelite base in sheet steel enclosure (without MCB) including making connections with lugs, testing etc.as required. G1 Single / Double Pole(Three pin) 20 A |
| 142 | P & F energy efficient / energy saving 9 Watt IP 20 LED Bulb cool white, in existing holder / fixture as required, minimum 900 Lumen output, 25000 burning hours, CCT 5700 I( or 6500 I( [ as per direction of Engineer incharge), ANSI, Lamp efficacyminimum 100 lumen/Watt, CRI 80, Driver efficiency >850/0, PF 0.95 at full load/ 230 volt AC. |
| 143 | P&F of IP20 LED Recessed /Surface mounted Round/Sqaure Non-Dimmable Downlight with die-cast aluminum housing & Heat Sink for heat dissipation high purity reflector with external BIS certified 2.5 KV surge protected driver having Efficiency > 85% and in compliance to IEC standards System Lumen efficacy of >_ 100 lm /watt and life time of minimum 35000 Burning Hours with 70% of intial Lumen maintaned CCT 3000\" K/4000\"/6000\" K maximum powre consumption should not more than the specified rating and Fixture shall be of CE complianed. Group 1 Surface Mounting LED Downlight 18/20 Watt |
| 144 | SITC of ISI mark( IS:8472) self priming monoblock pump set of approved make, TEFC, permanent split capacitor type (PSC), fitted with thermal overload protection, mechanical seal, 1440/1500 RPM, single phase(180 to 240 V). Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively. Group 1 Self priming pumps 0.5 HP, 1-Ø, (6-28)Mtr, (45-7.5)LPM |
| 145 | Supply & FixingISI marked( IS : 15683 )Portable Fire Exitnguisher, ABC type,finished externally with red enamel paint, completein all respects includinginitial fill and wall suspension of following capacity. 4 kg |
| 146 | P&F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board / sheet including making connections, testing etc. as required.Group 1 Double pole MCB40 A 63 A rating |
| 147 | Supply. Installation, Testing and Commissioning of 1.8 I(VA Pure Sinewave horne UPS / Inverter with 2 numbers 150 AH tubular Battery for bacl |
