Public Works Department-PWD has published Tender For General-Govt Hss For Girls, Peroorkada, Tvm- Construction Of First And Second Floor Building For Government Higher Secondary School For Girls, Peroorkada And Construction Of New Auditorium Composite Work. Submission Date for this Tender is 06-02-2023. Building Work Tenders in thiruvananthapuram Kerala. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Building proper(Civil work) |
| 2 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 3 | 2.26.1:Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil |
| 4 | 2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
| 5 | 50.2.25.1:Filling with contractor"s own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge |
| 6 | OD84942/2022-2023:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 7 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) |
| 8 | OD84943/2022-2023:Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to siteof laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Excess or less cement used as per design mix isnot payable or recoverable separately All work upto plinth level |
| 9 | OD84944/2022-2023:Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to siteof laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Excess or less cement used as per design mix isnot payable or recoverable separately All work above plinth level upto floor V level |
| 10 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 11 | 5.22A.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more |
| 12 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 13 | 5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform |
| 14 | 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers |
| 15 | 5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts |
| 16 | 5.9.7:Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases) |
| 17 | 5.9.19:Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges |
| 18 | 50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete. |
| 19 | 50.6.1.8:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete |
| 20 | 13.7.2:12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand) |
| 21 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 22 | 13.16.1:6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) |
| 23 | 13.28.3:12 mm thick plain cement mortar bands in cement mortar 1:4 ( 1 cement : 4 fine sand) :Raised Band |
| 24 | 11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. |
| 25 | OD84945/2022-2023:Providing and laying matt finished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. |
| 26 | 11.36:Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 27 | 11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. |
| 28 | 8.2.2.2:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm |
| 29 | 22.5:Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 30 | 50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood |
| 31 | 50.9.4.1:Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood |
| 32 | 50.9.2.1:Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge using Anjili/ Jack wood |
| 33 | 50.9.3.1:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood |
| 34 | OD84946/2022-2023:Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelledand glazed shutters 25 mm to 40 mm thick: Frostedglass panes4 mm thick glass pane |
| 35 | 9.48.2:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc |
| 36 | 9.53:Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 37 | 9.117.1:Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size19 x 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer"s specification and direction of Engineer-in-chargeExtruded section profile size 48x40 mm |
| 38 | 9.118.1:Providing and fixing to existing door frames24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of "H" section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness,fixed to the shutter styles by means of plastic/galvanised M.S. "U" cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer"s specification and direction of Engineer-in-charge( For W.C. and bathroom door shutter). |
| 39 | 50.9.15.2:Supplying and fixing 300 mm Aluminium aldrop |
| 40 | 50.9.15.3:Providing and fixing iron hooks and eyes : 200mm. |
| 41 | 50.17.1.1:Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. |
| 42 | 9.65.1:Providing and fixing ISI marked oxidised M S door latches conforming to IS : 5930 with screws etc.300x20x6 mm |
| 43 | 9.66.1:Providing and fixing ISI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc. complete:125 mm |
| 44 | 9.68.1:Providing and fixing oxidised M.S. casement stays ( straight peg type) with necessary screws etc. complete.300 mm weighing not less than 200 gms |
| 45 | 13.68.1:French spirit polishing:Two or more coats on new works including a coat of wood filler |
| 46 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 47 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer |
| 48 | 13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 49 | 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 50 | 10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 51 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) |
| 52 | 17.2.1:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid |
| 53 | 17.1.1:Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 54 | 17.7.3:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
| 55 | 18.51.1:Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore |
| 56 | 18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore |
| 57 | 50.17.1.3:Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. |
| 58 | 17.32.3:Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Oval shape 450x350 mm (outer dimensions) |
| 59 | 50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. |
| 60 | 50.18.8.3.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 12 kgf/cm2 |
| 61 | 50.18.8.9.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2 |
| 62 | 50.18.9.14.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10 Kgf/cm2 - External work- Exposed on wall |
| 63 | 50.18.9.15.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 10Kgf/cm2- External work- Exposed on wall |
| 64 | 50.18.9.16.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10Kgf/cm2 - External work - Exposed on wall |
| 65 | 50.18.9.17.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall |
| 66 | 50.18.9.18.1:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall |
| 67 | 50.18.9.19.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall |
| 68 | 50.18.9.20.3:Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Door Elbow |
| 69 | 50.18.9.20.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend |
| 70 | 50.18.9.20.6:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63x63x63 mm dia Door Tee |
| 71 | 50.18.9.22.3:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow |
| 72 | 50.18.9.22.6:Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee |
| 73 | 50.18.9.22.8:Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl |
| 74 | 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 75 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 76 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 77 | 10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 78 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 79 | OD84949/2022-2023:Supplying and fixing superior quality PVCmulti floor trap 110mm with PTMT gratings |
| 80 | OD152368/2022-2023:Constructing Concrete masonry manhole in C.C. 1:2:4 mix with wall thickness 20 cm(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) with foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement :3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design: Inside size 60x60 cm and up to 30 cm deep with low duty cast iron covering slab |
| 81 | OD152369/2022-2023:Extra for additional height of manhole with cement concrete 1:2:4 with wall thickness 20 cm for inside size 60x60cm |
| 82 | OD84951/2022-2023:Supplying and fixing stainless steel 304 grade English letters of height 300mmx25mm thick for name board including fixing charges etc complete |
| 83 | OD84952/2022-2023:Engraving letters on granite of height up to 10 cm colouring for inaguration stone including all charges for fixing etc complete |
| 84 | Electrification(Electrical work) |
| 85 | 1.10.3:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C |
| 86 | 1.25:Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 87 | 1.31:Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 88 | 90.3.10:Supplying and providing extra H.G conduit down rod of 19 mm dia 2 x 1.00 m long with 16/0.20 mm 3 core copper conductor flex wire conforming to relevant ISS or with the extended original wiring and giving connection etc. as required. |
| 89 | 90.3.20.3:Supply & installation of light fittings on TW round block Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thicknesscomplete with all accessories andlamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.1200 mm 1X20W LED Lamp with box type fixture |
| 90 | 90.3.24.3:Supply & installation of light fittings suspended on ball & socket arrangement with 19 mm down rod Supply, conveyance, installation, testing and commissioning the light fittings of following types made of .5mm thick CRCA sheet accessories andlamps etc. including supplying and fixing ball and socket arrangements on PVC round block, suspension down rod of 19mm dia MS conduit up to 2x30cm length including painting and wiring the down rod with 16/0.20mm 3 core round copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connections etc. a required.1200 mm 1X20W LED Lamp with box type fixture |
| 91 | OD141917/2022-2023:Supply, conveyance installation testing and commissioning the light fittings of 1500 lumen round/ square(1X1) recessed fitting made of diecast aluminium, having efficacy not less than 110l/w, pf greater than 0.95, THD less than or equal to 10%, Chip makeCree/Osram/lumilled/Nichea and giving connection with required length of 16/0.20mm 3 core copperconductor flex wire conforming to relevant ISS and giving connections as required. |
| 92 | 1.47:Supplying and fixing extra down rod of 10 cm length G.I. pipe, 15 mm dia, heavy gauge including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored) |
| 93 | 90.4.5.4:Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. 1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply |
| 94 | 90.4.1:Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required. |
| 95 | OD140307/2022-2023:Supply and fixing cast aluminium stove enameled bulk head fitting with deep drawn anodised aluminium body, epoxy powder coated, heat resistant prismatic glass cover with 9 W LED Bulb to wall / ceiling including giving connections with required length of 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS or extending the original wiring and making good the surface as required |
| 96 | 90.15.4.2:Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) |
| 97 | 90.15.4.3:Supply Conveyance, installation, testing and commissioning of 70W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) |
| 98 | 90.15.4.5:Supply Conveyance, installation, testing and commissioning of 40W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) |
| 99 | 1.58:Supplying and fixing PVC batten/ angle holder including connection etc. as required. |
| 100 | OD168544/2022-2023:Supply and installing B22 type 9W, LED BULB of 100 lumen/watt with PF>0.95 |
| 101 | OD168545/2022-2023:Supply and Installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required. 300/305 mm sweep Light Duty Exhaust fan in metal frame working on 230 V A/C |
| 102 | 90.4.8:Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required. |
| 103 | 90.5.1.10:Gong bell 300mm-without MS box |
| 104 | 1.17.3:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm |
| 105 | 1.17.6:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 1.5 sq. mm |
| 106 | 1.17.5:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.5 X 1.5 Sq. mm |
| 107 | 1.17.7:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.7 x 1.5 sq. mm |
| 108 | 1.17.12:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm |
| 109 | 1.17.15:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 2.5 sq. mm |
| 110 | 1.17.14:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.5 x 2.5 sq. mm |
| 111 | 1.17.17:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.8 x 2.5 sq. mm |
| 112 | 1.17.21:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm |
| 113 | 1.17.24:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 4 sq. mm |
| 114 | 1.17.30:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 6 sq. mm |
| 115 | 1.17.33:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 6 sq. mm |
| 116 | 1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm |
| 117 | 1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm |
| 118 | 1.21.3:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm |
| 119 | 1.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch |
| 120 | 1.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch |
| 121 | 90.10.3.14:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A SP switch with indicator |
| 122 | 90.10.3.17:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )6A universal socket |
| 123 | 90.10.3.33:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A 3pin Shuttered socket |
| 124 | 1.24.5:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet |
| 125 | 1.27.1:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm) |
| 126 | 1.27.2:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) |
| 127 | 1.27.4:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm) |
| 128 | 1.27.5:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm) |
| 129 | 90.9.2.1:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.100 x 50 mm CMS with base and lid |
| 130 | 90.9.2.2:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.Cable devider |
| 131 | 90.9.2.3:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.External angle 90 degree |
| 132 | 90.9.2.5:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.Internal angle 90 degree |
| 133 | 90.9.2.8:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.End cap |
| 134 | 90.9.2.10:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.Joint cover |
| 135 | 90.9.2.11:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.Cable retainer |
| 136 | 90.9.2.12:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.1 to 3 module mounting box |
| 137 | 90.9.2.14:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.8 module mounting box |
| 138 | 90.10.1.2:Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )2 module moulded plastic box on surface |
| 139 | 1.28.1:Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.1 or 2 Module |
| 140 | 1.28.2:Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module |
| 141 | 1.28.5:Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.8 Module |
| 142 | 90.11.1.10:Supply and installation ofsheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - three phase double cover (IP 42/43) |
| 143 | 90.11.1.11:Supply and installation ofsheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+18) - three phase double cover (IP 42/43) |
| 144 | 90.11.1.14:Supply and installation ofsheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43) |
| 145 | 2.3.4:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator16 way, Double door |
| 146 | 2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole |
| 147 | 2.10.4:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole |
| 148 | 2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 149 | 2.14.1:Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps |
| 150 | 2.13.1:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 151 | 2.13.2:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps |
| 152 | 2.15.1:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps |
| 153 | 2.16:Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required. |
| 154 | 90.12.1.28:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium powercable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).3.5 core 35 sq mm |
| 155 | 90.12.7.41:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp |
| 156 | 90.12.7.40:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp |
| 157 | 90.12.7.28:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 35 sq mm with factory made clamp |
| 158 | 90.12.7.30:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 70 sq mm |
| 159 | 9.1.21:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm) |
| 160 | 9.1.23:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm) |
| 161 | 9.1.33:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm) |
| 162 | 9.1.32:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm) |
| 163 | 90.12.10.5:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation90/75 mm or nearest size |
| 164 | 5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 165 | 5.9:Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 166 | 90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG) |
| 167 | 90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) |
| 168 | 90.16.1.4:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG) |
| 169 | 90.16.5.4:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.00 mm (8 SWG) |
| 170 | 90.16.5.1:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG) |
| 171 | 90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG) |
| 172 | 90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) |
| 173 | OD142377/2022-2023:Supply and providing 250A 8 way MCCB Load Bank Sub Main double door Distribution Board with IP43 protection complying to lEC 61439-2 with copper bus neutral link earth bus etc suitable for providing 3 pole incoming and 3 Pole outgoing fixed on wall using necessary anchor bolt including cutting hole on the wall , making good the damages color washing etc. as required. |
| 174 | OD150283/2022-2023:Supply and fixing of Bottom cableunits (Double Door) f suitable for 250A 8 way compliance with latest standard IEC 61439-2 of SMDBs power distribution broadwith necessary connected items as required. ) |
| 175 | OD150714/2022-2023:Supply and fixing of Metering box with ammeter, voltmeter & Phase indicators 3nos suitable for 250A 8 way Double door SMDBs power distribution broad compliance with latest standard IEC 61439-2 (Cat. no. 812248) of SMDBs power distribution broadwith necessary connected items as required. |
| 176 | OD150724/2022-2023:Supply and fixing of cable Alley boxfor 250A 8 way Double door SMDBs power distribution broad compliance with latest standard IEC 61439-2 of SMDBs power distribution broadwith necessary connected items as required. |
| 177 | OD150736/2022-2023:Supply and fixing of Corner Box suitable for 250A 8 way Double door SMDBs power distribution broad compliance with latest standard IEC 61439-2of SMDBs power distribution broadwith necessary connected items as required. |
| 178 | 90.14.10.2:Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 25/35 kA (Ics=100%Icu), 3 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL |
| 179 | OD142291/2022-2023:Supply, Installation, Testing and commissioning of 100/5 A, 5 VA, accuracy class 1, Resin Cast Metering CT as required |
| 180 | 90.14.10.3:Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 16 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL |
| 181 | 2.2.14:Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.125 Amp, 36 KA |
| 182 | 90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board |
| 183 | 90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br> Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame) |
| 184 | 90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc. |
| 185 | 90.14.3.3:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardSupply and providing 'U' section PVC beeding in the panel board |
| 186 | 2.1.3:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.100 Amp TP&N |
| 187 | OD124370/2021-2022: Supply and providing M8 anchor bolt hook in wall / parapet for binding support for service main |
| 188 | OD151049/2022-2023:Supplying and fixing 100A, HRC Fuse with HRC Fuse link with connections, in existing meter board as required. |
| 189 | OD150862/2022-2023:Supply and fixing of 100 A, 2 Way neutral links mounted on DMC/SMC base and its connected accessories as required |
| 190 | OD170802/2022-2023:Supply, fixing and giving connection of 125 A 25 KA3 PoleMCCB having thermal setting of 80 -100 % |
| 191 | OD171818/2022-2023:Supply & installation of 5 KVA Online UPSwith 1040 AH VRLA battery with stand, 1 phases in and 1 phase out connecting in stand-alone configuration with indoor (IP20) with surge protection system, Input PF >0.99, input THD <5 % without use of any external filters, double conversion technology with input voltage range 160 V TO 300 V @ full load, 50Hz Single Phase, output 230V, 50Hz single phase, It shall be 100% generator compatible, with Efficiency > 93% and output power factor , Eco mode Efficiency 98% and including all accessories etc. as required.relevant IS standards. UPS offered is true online double - conversion DSP based UPS system and UPS shall be with automatic bypass built-in. The system shall have IGBT rectifier and inverter. |
| 192 | Fire fighting works(Electrical work) |
| 193 | 90.12.7.39:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 6 sq mm with factory made clamp |
| 194 | 90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG) |
| 195 | 90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG) |
| 196 | 90.17.4.2:Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) a. Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 b. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. c. M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. d. Suitable cement concrete foundation duly plastered and with anti vibration pads. 450 lpm at 35 m Head |
| 197 | 90.17.8.7:Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :100 mm |
| 198 | 90.17.8.6:Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :80 mm |
| 199 | 90.17.9.2:Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :Single headed Stainless steel |
| 200 | 16.8:Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required |
| 201 | 17.1.3:FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)Supplying, installation, testing & commissioning of manual call boxes of MS Construction in surface/recess with stainless steel chain & hammer assembly Complete with glass and push button etc. as required. |
| 202 | 17.1.6:FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. |
| 203 | 17.1.9.1:Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.4 Zone |
| 204 | 17.5.2:CABLING & WIRINGSupplying & laying of 2x1.5 sq mm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. |
| 205 | 90.17.11.5:Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required100 mm dia |
| 206 | 90.17.14.5:Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100mm dia |
| 207 | 90.17.17.2:Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. a. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 b. 20 mm nominal internal dia gun metal globe valve & nozzle. c. Drum and brackets for fixing the equipmets on wall. d. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 40m |
| 208 | 90.17.16.2:Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Stainless Steel (Grade 304) |
| 209 | 90.17.18.2:Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :Stainless Steel (Grade 304) |
| 210 | 90.17.19.1:Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :2 way-100 mm dia M.S. Pipe |
| 211 | 90.17.22:Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required |
| 212 | OD151108/2022-2023:Fabrication, supply, Installation testing & commissioning of Electrical control panel of cubical construction, wall mounted type, fabricated out of 2mm thick CRCA sheet, with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process inter-connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for terrace pump suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required. 63 A TPN SDF, Digital multifunction meter with CTs etc. LED type indicating lamps and DOL starter for 5/7.5HP terrace pump etc |
| 213 | OD151779/2022-2023:Supply and fixing of Hose cabinet to accommodate two pieces of Hose pipes along with male and female coupling and 1 No. branch pipe. The cabinet shall be fabricated using 1.6mm MS sheet with hinged front door provided with glass panel and locking arrangement. The cabinet shall be painted to scarlet red colour outside and off-white inside as required. |
| 214 | 90.17.20:Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. |
| 215 | OD151785/2022-2023:Supply and installation, testing and commissioning of ABC type 5kg fire extinguisher with complete with installation brackets conforming to IS15683 with ISI mark As required. |
| 216 | OD151788/2022-2023:Supply and installation, testing and commissioning of CO2 type fire extinguisher with 4.5 kg. Capacity complete with installation brackets confirming to IS15683 with ISI mark as required. |
| 217 | OD151794/2022-2023:Supply and providing Glow Sign boards of 3mm PVC foam board size not less than 12''x4'' as required |
| 218 | OD170776/2022-2023:Supply and providing Assembly point boards / Fire Escape Route of 3mm PVC foam board size not less than 16"x16" as required |
| 219 | OD151802/2022-2023:Charges for preparation of Electrical/fire Drawing per A3 sheet first copy |
| 220 | OD151811/2022-2023:Copying charges of Electrical/fire Drawing per A3 sheet additional copies |
| 221 | Air-Conditioning(Electrical work) |
| 222 | OD168550/2022-2023:Supply, installation, testing and commissioning of wall mounting type split inverter air conditioner unit conforming to IS fitted with rotary compressor operating on 230V single phase AC supply, non CFC refrigerant capable of performing functions like cooling, dehumidifying, air circulating, filtering etc of following capacity, microprocessor control with cordless remote control etc 2.0 TR 5 star rated, with minimum ISEER of 4.5, single phase split type AC unit with comprehensive maintenance contract up to the end of 36 months from date of commissioning including periodical services, gas topping etc. complete.(Including stand) |
| 223 | OD168552/2022-2023:Supply and installation of automatic stabilizer suitable for 2.0 TR AC unit with working voltage range of 170 V - 270 V AC, current capacity of 15A, indicators, suitable for wall mounting etc. as required. (V-Guard VG 500 or equivalent) |
| 224 | OD168553/2022-2023:Supply and providing the following size soft drawn copper pipe for extending the pipe between out door and indoor unit, including insulating the pipe using rubberized foam sleeve 10mm thick, brazing, leak testing etc.:- 3/8 inch (9.525 mm) and 5/8 inch (15.875 mm) 22 gauge |
| 225 | 90.6.5.19:Supply and drawing the following sizes of multi-core PVC insulated & FRLSPVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4 core 2.50 sq mm |
| 226 | 90.10.3.23:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )16A 3 pin plug top |
| 227 | OD168551/2022-2023:Supply and fixing of 25 mm outer dia. 10kgf cm2 PVC pipe along with all required accessories in surface/ recess including cutting the wall and making good the damages etc. as required |
| 228 | PART A LAN & Wi-Fi(Electronics Work) |
| 229 | OD175546/2022-2023:Supply and Installation of Layer 2 Manageable 28 port Ethernet Switch which having 24 x 10/100/1000 Mbps plus 4 x Gigabit 10G SFP plus(Up Link ports) , web manageable supporting ipv6 having 256 MB RAM, Switching Capacity: 128 Gbps, AC 230V. Warranty: 3 Year Approved Make: Allied Telesis, Brocade, Cisco, HP, Juniper. |
| 230 | OD175547/2022-2023:Supply and fixing 24 port Enhanced CAT-6 fully loaded Modular type patch panel as per EIA/TIA-TSB 40A specification for interconnecting servers and clients, including termination charges. Preferred Make: Actassi, Belden, Panduit, R&M, Molex or equivalent" |
| 231 | OD175548/2022-2023:"Supply and Installation of CAT-6 Information Outlet for 1000Mbps having spring shutter / dust cover face plate with one number of RJ45 keystone socket in the existing CMS/existing PVC Box including termination charges etc. Preferred Make: Actassi, Belden, Molex, Commscope, R&M or equivalent" |
| 232 | OD175549/2022-2023:Supply and installation of CAT-6 Information Outlet for 1000Mbps having spring shutter / dust cover dual face plate with two numbers of RJ45 keystone sockets in the existing CMS/PVC Box including termination charges etc. Preferred Make: Actassi, Belden, Molex, R&M or equivalent |
| 233 | OD175550/2022-2023:Supply and fixing 1 module GI box (75mm x 75mm x 60mm deep) on recess including making good the damage colour washing etc., as required. |
| 234 | OD175551/2022-2023:Supply, laying, certification and documentation of 23 AWG Soild copper CAT-6 UTP cable with LSZH (Low Smoke Zero Halogen) through the existing conduit and cassing and capping as required. Preferred Make: Actassi, Belden, Molex, R&M or equivalent |
| 235 | OD175552/2022-2023:Supply and Installation of 19inch 6 port rack mountable fully loaded 1U size complete Steel housing fully powder coated Light Interface Unit (LIU) w having FR grade Nylon Cable grommets, ABS Splice Trays with fully cushioned splice holder containing grooves for fixing splice protection sleeves, Cable Spools made up of flame retardant plastic, high impact resistance, stackable design for providing sufficient room for storage of excess cables, Blanking plates, etc. Including splicing charges. Preferred Make: Commscope, Molex, R&M, Sterlite, AFL Hyperscale or equivalent. |
| 236 | OD175553/2022-2023:Supply and Installation of 6 Core Single Mode Low Water Peak Outside plant (OSP) OFC having LSZH sheath, conforming to ITU-T G.655, IEC 60794-1 : 2001, IS 13882 (Part 1/Sec 1) : 1999 etc. Preferred Make: Commscope, Molex, R&M, Sterlite or equivalent. |
| 237 | OD175554/2022-2023:Supply and Installation of Fiber Splice Closure Box support 6 core fiber cable with fully cushioned splice holder containing grooves for fixing splice protection sleeves, Cable Spools made up of flame retardant plastic, high impact resistance, stack-able design for providing sufficient room for storage of excess cables, Blanking plates, pigtail, etc. Including splicing charges |
| 238 | OD175555/2022-2023:Supply and Installation of I0G Single Mode Duplex SFP module. Preferred Make: Cisco, Belden, Brocade, Aruba, Netgear or equivalent |
| 239 | OD175556/2022-2023:Supply & providing SC-LC/LC-LC Duplex patch cord 1 mtr. Preferred Make: Commscope, Molex, R&M, Sterlite or equivalent |
| 240 | 90.9.1.1:Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.50x50mm Cable Management System with base and lid |
| 241 | 90.9.1.4:Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.Internal angle 90 degree |
| 242 | 90.9.1.3:Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.Flat angle 90 Degree /Tee |
| 243 | 90.9.1.7:Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.End cap |
| 244 | 1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm |
| 245 | 1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm |
| 246 | 90.9.2.1:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.100 x 50 mm CMS with base and lid |
| 247 | OD175576/2022-2023:"Supply and providing 3Mtr CAT-6 Giga UTP patch cord. Preferred Make: Actassi, Belden, Commscope, R&M, Molex or equivalent" |
| 248 | OD175580/2022-2023:"Supply & providing 1Mtr CAT-6 Giga UTP patch cord. Preferred Make: Actassi, Belden, Commscope, R&M, Molex or equivalent" |
| 249 | OD175809/2022-2023:Supply and Installation of 19inch, 9U, Network Rack with ACDB 6 port, cable manager, PDU etc. Preferred Make: D-Link, HCL, Netrack, President, Valrack or equivalent. |
| 250 | OD175825/2022-2023:"Supply and Installation of ≥ 16 U Floor mount networkRackfor LAN and CCTV with rollers, door, with 5A x 5 Sockets and power distributor, internal wiring, cooling fan,Trays for keeping POE switch, etc. for fixing Equipment such as NVR, POE switch,Network switch, patch panel ,Fiber LIU etc. with front glass/ door with lock and MS /Back Door openable. Preferred Make: D-Link, HCL, Netrack, President, Valrack or equivalent." |
| 251 | OD175828/2022-2023:Supply, Installation, Testing and Commissioning of 1KVA Line Interactive UPS with ≥30 minutes battery back up on full load for network Rack.Warranty 3 year for UPS and 2 year for battery. Preferred Make: APC, Eaton, Vertiv, V Guard or equivalent |
| 252 | OD175832/2022-2023:Permanent Labeling and documentation such as network diagram of all the nodes from patch panel and Up-links fromswitches on the rack for network ,CCTV,PA system wiring etc.. |
| 253 | OD175836/2022-2023:"Supply and Installation of Manageable Wi-Fi -6 wireless Access points having following Specifications: Indoor Dual Band Wi-Fi Access Point with smoke detector appearance. Frequency: 2.4GHz and 5GHz, Wireless Mode: Dual band 2x2 (2.4GHz and 5.0GHz) 4 streams of data for an aggregate throughput of up to 1.8Gbps. Power over Ethernet (PoE), VLAN Support, Antennas: Internal 3.8/4.5dBi (2.4GHz/5GHz) Bidirectional Multi-User MIMO. Certifications: Wi-Fi Alliance certified (WFA) 802.11ax, with (Wi-Fi 6), WPA2, WPA3, Security: Wi-Fi Protected Access (WPA/WPA2/WPA3), 802.11i, MAC address filtering, Guest Network etc. including all accessories such as power adaptor, mounting kit, connecting CAT-6 patch cords as per site condition, etc. Preferred Make: Netgear , Aruba or equivalent" |
| 254 | OD175837/2022-2023:"Supply and Installation Gigabit PoE injector which fully conforms to the standard IEEE802.3 AT for transmitting power through Ethernet cable distance up to 100 meters. PoE budget: POE+ up to 30W. TransmissionRate:1000Mbps. Certifications: FCC, CE, RoHS, UL. Warranty for 3 years. Preferred Make: Allied Telesis, Tp-Link, Tenda, Ubiquiti, Aruba or equivalent" |
| 255 | PART B CCTV(Electronics Work) |
| 256 | OD175910/2022-2023:Supply and Installation ofgreater than or equal to 4MP Full HD WDR IR Bullet Camera having 2.7 -12mm Motorized Lens, Sensor: 1/3inch 4MP Progressive scan CMOS Image Sensor, IR Range of 50 metre, H.265 / H.264 / MJPEG triple-stream, Back Light Comp: WDR (120dB), Day/Night (ICR), Auto Iris, 3DNR, AWB, AGC, BLC, Resolution : 4MP (2560x1440), Audio Input and output 1 Channel, IP67 weatherproof, supports the ONVIF protocol, Micro SD cardfor edge recording, Power Source: DC12V, PoE, video analytics: Motion detection, video tampering, network disconnection featuresetc., including all mounting and connecting accessories. Preferred Make: CP Plus ,Norden, Honeywell or equivalent |
| 257 | OD175912/2022-2023:Supply and Installation ofgreater than or equal to 4MP WDR IR Network Dome Camera having 3.6mm fixed lens ,Sensor: 1/3 inch 4MP Progressive scan CMOS Image Sensor, IR Range of 30 metre, H.265+ / H.264+ / MJPEG dual-stream encoding, Back Light Comp: BLC / HLC / WDR(120dB),Resolution : Main Stream 2688 × 1520 (1 fps–20 fps) ,Sub Stream: 704 × 576 (1 fps–20/25 fps) Audio Support 1 Channel, IP67 weatherproof ,supports the ONVIF protocol, Micro SD cardfor edge recording , Motion detection, video tampering, network disconnection features ,Power Source: DC12V, PoEetc. including all mounting and connecting accessories.Preferred Make: CP Plus, Norden, Honeywell or equivalent |
| 258 | OD175914/2022-2023:Supply and Installation of Supply and Installation ofNetwork Video Recorder, support ≥ 32 Channel, should support resolution minimum 4 MP IP camera and up to 8 MP. minimum 2 and up to 4 SATA HDD ports each supports up to 10TB, Dual stream, Network bandwidth : Access: 160 Mbps; Storage: 128 Mbps; Forward: 48 MbpsH.265+/ H.265(HEVC)/ H.264+/ H.264 video compression or better, Network: 1xRJ-45 10/100/1000 Mbps, 2xUSB, VGA, HDMI having video out put up to 4K etc, Audio input and output,ONVIF ,Motion detection,Camera disconnection, storage error, g, video loss, scene changing comparability,. OEM on site Warranty for 3 Years: Preferred Make:CP Plus, Norden, Honeywell or equivalent |
| 259 | OD175916/2022-2023:"Supply and Installation of Enterprise class Video Surveillance Hard Disk of 8TB. OEM on site warranty for 3 years. Preferred Make: WD, Hitachi, Seagate or equivalent" |
| 260 | OD175918/2022-2023:"Supply and Installation of ≥32" LED Professional Display capable of working 24/7 with resolution Full HD for Surveillance purpose having ports HDMI 2 nos, USB : 2 DP,RJ 45: 1 nos each with necessary wall mounting accessories and cables such as HDMI,wireless mouse etc. EMC, Safety Certifications: OEM warranty for 3 years. Approved Make: Sony, LG, Samsung, Panasonic ." |
| 261 | OD175920/2022-2023:"Supply and Installation of 16 port L2 Manageable Auto sensing 10/100/1000 Mbps PoE+ Switch having minimum 16PoE+ port, switching capacity ≥36Gbps,with 2nos of dedicated Gigabit SFP fiber uplink port. dedicated PoE power delivery capacity ≥180W. AC 230V power input. Preferred make: Cisco, HP, Allied Telesis, Juniper, Netgear or equivalent" |
| 262 | OD175923/2022-2023:"Supply and Installation of High-Speed HDMI 2.0 Cable support 4K @ 60Hz/30Hz with minimum 2-meter length having 24K gold plated connector high purity oxygen free copper conductor, Transfer digital audio and video signals at high speed of 10.2 GBPS. Warranty: 3 years Preferred Make: Kramer, Honeywell or equivalent." |
| 263 | OD175924/2022-2023:Supply and Installation of 64GB memory card suitable for the camera. Preferred Make: Camera make, Sandisk, kingston or equivalent |
| 264 | OD175932/2022-2023:"Supply and fixing 9U, Network Rack having tray and sufficient depth suitable for keeping CCTV equipment such as NVR, POE switch etc. with ACDB 6 port, cable manager and trays for keeping POE switch and coolling fan,etc. Preferred Make:Netrack, President, Valrack or equivalent." |
| 265 | OD175938/2022-2023:Supply and Fixing 1 Module UL certified PVC Box on surface. Preferred Make: Honeywell or equivalent. |
| 266 | OD175943/2022-2023:Supply and Installation of Wireless mouse and keyboard suitable for NVR. Preferred Make: Dell, HP or equivalent. |
| 267 | PART C Projector and White Board(Electronics Work) |
| 268 | OD175953/2022-2023:Supply and Installation of Short Throw Full HD 3LCD Projector with Native Resolution : WXGA, Lamp life (normal/Eco) : 5,000 hours / 10,000 hours, Zoom : 1.0 - 1.35 (Digital Zoom), Colour Light Output : 3400lm (Normal) Throw Ratio: 0.48 - 0.65, Contrast Ratio : 16,000:1, Sound Output : 16W,Wireless LAN ON-OFF, USB, HDMI, VGA, Composite in, audio in, audio out connectivity, with all accessories including Ceiling mounting kit and required power cable,remote,battery etc. As per site condition. Preferred Make: Epson,BenQ, CASIO, Sony or equivalent. |
| 269 | OD175962/2022-2023: Supply and Installation of Ceramic White Board Size of 8x4 Feet size suitable for projection screen. Preferred Make: Scholar or equivalent. |
| 270 | OD175977/2022-2023:Supply and Installation of High Speed HDMI 2.0 Cable support 4K @ 60Hz with 15 meter length having 24K gold plated connector high purity oxygen free copper conductor, Transfer digital audio and video signals at high speed of 10.2 GBPS. Warranty: 3 year Preferred Make: Kramer,Honey Well or equivalent. |
| 271 | OD175981/2022-2023:Supply and Installation ofHDMI face plate with with one number HDMI(male to female type) connector fixed on 1 module PVC box havingData rate support : Up to 10.2 Gbps, HDMI Compliance: HDR, HDCP 2.2, EDID and CEC. including connection to Existing HDMI cablePreferred Make: L&T Englaze, Anchor Roma or equivalent |
| 272 | OD175985/2022-2023:Supply and Installation ofHIGH SPEED HDMI 2.1 Cable (2Mtr) with 24K gold plated HDMI connector , cable braided with cotton mesh ,Transfer speed of up to 48 GBPS. Preferred Make : Honeywellor equivalent |
| 273 | Part D Audio System - Auditorium(Electronics Work) |
| 274 | OD175986/2022-2023:Supply and Installation of Two-Way Cabinet Speaker System suitable for speech and music having Power RMS/Program: 400W/800W, Frequency Response: 45 -18,000 Hz, Nominal Impedance: 8ohm, SPL at (1W/1m): 98 dB, Low frequency driver: 1 x 15" LF speaker, High frequency unit: 1.75" dynamic Horn, easy stand and wall mounting option etc. including all mounting and connecting accessories Preferred Make: Ahuja, Studiomaster or equivalent |
| 275 | OD175993/2022-2023:Supply and Installation of Wall Mount Bracket suitable for fixing above speakers including all additional accessories required for fixing bracket.Preferred Make: Ahuja or equivalent |
| 276 | OD175996/2022-2023:Supply and Installation of 2-way bi-amplified325W (RMS) active stage monitor with, Amplifier Type: Class D DSP, Power Output – (RMS / Peak): 325/650 watts, Frequency Response: 55Hz-19kHz ±3dB, LF Driver : 1 x 12″ woofer, HF Driver Size: 1″ exit, Max SPL : 123db, Input : 1 x Stereo RCA,1 x Jack (line) and 1 x Switchable XLR-Jack (mic/line), Output: Balanced XLR (M). including all mounting and connecting accessoriesPreferred Make : Studiomaster Clio 124 or equivalent |
| 277 | OD176000/2022-2023:Supply and Installation of Dual channel 2000 Watts rated power amplifier having Continuous Rated Power: 8ohms: 400W + 400W RMS, 4ohms: 700W + 700W RMS, 2ohms: 1000W + 1000W RMS, Frequency Response: 20-20,000Hz, Selectable HPF (120Hz / 80Hz / OFF), Signal to Noise Ratio > 95dB. Input: 2×XLR, Stereo Phone connection, output: Speak on 4-Way connection. including all mounting and connecting accessoriesPreferred Make: Ahuja, Studiomaster or equivalent |
| 278 | OD176017/2022-2023:Supply and Installation of 18-inch Gooseneck condenser microphone and base with on/Off switch having Frequency Response: 80 to18,000 Hz, Output Connector: XLR(M) type, SPL: 125db.including all mounting and connecting accessories. Preferred Make: JTS or equivalent |
| 279 | OD176054/2022-2023:"Supply and Installation of Dynamic Vocal Microphone with ON/OFF Switch having Frequency Response: 50Hz-20KHz, Impedance: ≥150 Ω, Polar Pattern: Cardioid, Three-pin audio (XLR) connector etc. Preferred Make: Shure SM 58S or equivalent" |
| 280 | OD176061/2022-2023:"Supply and Installation of Microphone Clip suitable of above microphone for connecting to mic stand Preferred Make: Shure or equivalent" |
| 281 | OD188500/2022-2023:"Supply and Installation of Wireless UHF handheld transmitter Microphone with Single Channel Non-Diversity Receiverhaving Selectable UHF frequencies within a large bandwidth, Up to 10 channels or more, Audio Frequency Response: 40Hz –16kHz. Including Power adaptor and Batteries Prefered Make: Studiomaster or equivalent" |
| 282 | OD176063/2022-2023:"Supply and Installation of Floor standing Microphone stand with Height: 920-1500 mm, match to above microphone clip. Preferred Make: Ahuja or equivalent" |
| 283 | OD176065/2022-2023:"Supply and Installation of >= 16 channel audio Mixer having following specifications. 16-Channel Mixing Console, 10 Mic / 16 Line Inputs (8 mono + 4 stereo), 4 GROUP Buses + 1 Stereo Bus, 4 AUX (incl. FX), “D-PRE” mic preamps with an inverted Darlington circuit, 1-Knob compressors, PAD switch on mono inputs, +48V Phantom power, XLR balanced outputs, Internal universal power supply for world-wide use. Approved Make: Allen-Heath, Behringer, Yamaha, Sound Craft." |
| 284 | OD176075/2022-2023:"Supply and drawing of single run 2.5 sq.mm speaker cable confirming to relevant standards through the existing conduit and giving connection to the Speakers from Amplifier with necessary connectors Preferred Make: Finolex, Havells, RR Kabel or equivalent" |
| 285 | OD176087/2022-2023:Supply and installation of Recessed Audio Stage Floor Box with provision for load 16 no's of XLR combo/Phono/Stereo connectors. The Stage boxes is fitted with multipair connectors allowing cable disconnection from stage box. Powder coated metal finish, Box End: provision for loading 16 no's of connectors custom configured. Snake End: XLR-M, XLR-F, or 1/4″ TRS termination. |
| 286 | OD176098/2022-2023:Supply and Laying of Audio Snake Cable, CM-Rated, 16 -24 AWG tinned copper pairs, polyolefin insulation, individually shielded and bonded to numbered/color-coded PVC jackets. Approved Make: Belden-1514C. |
| 287 | OD176104/2022-2023:Supply and installation of XLR combo XLR Male-Female/XLR chassis/TRS/Phono/RCA connectors. Approved Make: Neutrik |
| 288 | OD176108/2022-2023:Supply and installation of Speak ON connector suitable for above amplifier and speaker. Approved Make: Neutrik |
| 289 | OD176111/2022-2023:Supply and installation of Console Audio Rack having >=16U space with pop-Up top on top of the rack for keeping Mixer, side carrying handles, shelves for keeping equipment such as amplifiers, wireless units with lock and key, Threaded rack rails, cable management, 16 Amps PDU with minimum 4 nos of socket, Four Nos of heavy-duty industrial casters (two are locking) for movement. (Design of rack in consultation with department authorities.) |
| 290 | OD176115/2022-2023:"Supply and Laying of 2 core Shielded PVC Insulated Microphone Cable with Ultra low Capacitance 60 (Pf/m); Outer Jacket: PVC Matt; Working Temperature: 20 °C / +70 °C; Diameter: 6.5mm; extremely flexible, laying through existing conduct. Appr Make: Belden, Klotz, Gotham." |
| 291 | 1.21.3:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm |
| 292 | 5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 293 | 5.7:Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. |
| 294 | 5.19:Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 295 | Part E- Audio System- Library(Electronics Work) |
| 296 | OD176158/2022-2023:"Supply and Installation of Dual Channel Power Amplifier>= 2 X 150 Watts @ 100V / 4-ohm, Frequency Response (± 3 dB) 20Hz - 20kHz, Bridge Mode>= 1 X 300 Watts @ 8-ohm, Class D Amp Topology, Signal / Noise > 90 dB, Crosstalk (@ 1 kHz) > 70 dB Convection Cool, 19" Rack mountable Including all Connecting Acessories. Approved Make: Apart, JBL, Audac, Bosch, Crown, Warfdale" |
| 297 | OD176164/2022-2023:"Supply and Installation of 12 channel audio Mixer having folowing specifications. 12-Channel Mixing Console, Max. 6 Mic / 12 Line Inputs (4 mono + 4 stereo), 2 GROUP Buses + 1 Stereo Bus, 2 AUX (incl. FX), D-PRE mic preamps with an inverted Darlington circuit, 1-Knob compressors, PAD switch on mono inputs, +48V Phantom power, XLR balanced outputs, Internal universal power supply for world-wide use, Approved Make: Allen-Heath, Sound Craft, Yamaha" |
| 298 | OD176166/2022-2023:"Supply and Installation of ≥ 6” 2-way Wall Mount Cabinet Speaker with 1” dome tweeter and a 6” Mid / Low frequency driver, with RMS Power: ≥ 60watts/100V, Impedance: 8 Ohms, Max power ≥ 120W, Frequency Response: 55Hz-20KHz, Including all Mounting Acessories. Approved Make: Apart, JBL, ElectroVoice, Audac, Warfdale." |
| 299 | OD176183/2022-2023:"Supply and Installation of Wireless UHF Lavalier Microphone with Receiver having Compact bodypack Transmitter, unobtrusive clip-on microphone having Selectable UHF frequencies within a large bandwidth, up to 10 channels, Operating time: 10 hrs, Modulation: Wide band FM, Including Power adaptor and Batteries Preferred Make: Sennheiser, Shure or equivalent" |
| 300 | OD176185/2022-2023:"Supply and Installation of Wireless UHF handheld transmitter Microphone with double superheterodyne Receiver having Selectable UHF frequencies within a large bandwidth, up to 10 channels, Operating time: 10 hrs, Modulation: Wide band FM, Including Power adaptor and Batteries Preferred Make: Sennheiser, Shure or equivalent" |
| 301 | OD176197/2022-2023:"Supply and Installation of alkaline AA size battery suitabile for above Wireless transmiters. Prefered Make: Duracell or equivalent" |
| 302 | OD176204/2022-2023:"Supply and drawing of single run 1.5 sq.mm speaker cable conforming to relevant standards through the existing conduit and giving connection to the Speakers from Amplifier with necessary connectors Preferred Make: Finolex, Havells, RR Kabel or equivalent" |
| 303 | OD176208/2022-2023:"Supply and Installation of ≥ 16 U Floor mount Rack with rollers, door, with 5A x 5 Sockets and power distributor, internal wiring, cooling fan,sliding trays etc. for fixing Equipments such as Mixer, Amplifier and Wireless units with front glass/ door with lock and MS /Back Door openable. Preferred Make: Netrack, President, Valrack or equivalent." |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
