}

Tender For Development Of Surrounding Areas Of Panchayat Building Construction Of Shed For Parking Scooter/Four Wheelers And Other Miscellaneous Works For Panchayat Building At Ambede Nagargao., North Goa-Goa

Public Works Department-PWD has published Tender For Development Of Surrounding Areas Of Panchayat Building Construction Of Shed For Parking Scooter/Four Wheelers And Other Miscellaneous Works For Panchayat Building At Ambede Nagargao.. Submission Date for this Tender is 27-01-2023. Shed Construction Tenders in North Goa Goa. Bidders can get complete Tender details and download the document.




Tender Notice

35814456
Tender For Development Of Surrounding Areas Of Panchayat Building Construction Of Shed For Parking Scooter/Four Wheelers And Other Miscellaneous Works For Panchayat Building At Ambede Nagargao.
Open Tender
Indian
Goa
North Goa
27-01-2023

Tender Details

Development Of Surrounding Areas Of Panchayat Building Construction Of Shed For Parking Scooter / Four Wheelers And Other Miscellaneous Works For Panchayat Building At Ambede Nagargao.

Key Value

Document Fees
INR 4000 /-
EMD
INR 74007.0 /-
Tender Value
INR 37 Lakhs /-

BOQ Items

Name of Work: Development of surrounding areas of Panchayat Building construction of shed for Parking scooter/four wheelers and other miscellaneous works for Panchayat Building at Ambede Nagargao.
Sl. No. Item Description
1Earthwork in surface excavation not exceeding 30 cm depth(but exceeding 1.5 m width as well as 10 sq.m on plan) including disposal of excavated earth beyond work site for all leads lift disposed earth to be leveled and neatly dressed in:
2a) Ordinary soil
3Earthwork in excavation over areas in saturated soil (exceeding 0.30 m upto a depth of 0.60 m) including disposal of excavated earth lead upto 50 m and lift upto 1.5 m disposed earth to be neatly dressed and leveled including pumping or bailing out water
4Earthwork in excavation in foundation pipeline trenches, drain in saturated soil upto a depth of 0.60 m lift upto 1.50 m including shoring, strutting and pumping/bailing out water stacking the excavated soil not more than 5 m. clear from the edge the excavation and returning the stacked soil in 0.15 m layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming, watering and disposing of all surplus excavated soil within a lead upto 20m.
5Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.
6Providing & laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering,shuttering and finishing in:
7a) All works upto plinth level
8Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:
9a) All works upto plinth level
10Providing & laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering,shuttering and finishing in:In retaining walls , return walls(any thk) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc, upto floor five level.
11Centering and shuttering including struttings, propping etc. and removal of formwork for :b)vertical surfaces such as retaining walls , return walls, walls (any thk) including attached pilasters, buttresses, plinth and string courses, fillets, etc.
12Providing and fixing rigid PVC S.W.W. (soil, waste & rain water) drainage pipes ofapproved including lubricant etc. complete (single/double) socketed:
13b) 75 mm dia
1412mm cement plaster 1:4 (1 cement : 4 fine sand)
15Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of approved make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
16Providing and fixing Colouron Plus galvulium roofing Sheets of 0.5mm thick double ribbed trapezoidal profile coated 1080mmwith cover width of 1020mmincluding all the accessories(JSW or equivalent make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge.
17c) Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge.
18Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.
19Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement :4 coarse sand)in foundation and basement + Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level..
20Providing and laying upto floor fivelevelpre-cast cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including hoisting and setting in position in cement mortar 1:3 (1cement : 3 Coarse sand) including smooth finishing theexposed surfaces, with cement mortar 1:3 (1 cement: 3 fine sand) including centering and shuttering etc.
21b) String courses, copings, bed plates, anchor blocks, plain window sills and the like.
22Painting three or more coats with acryllic exterior paint of approved brand and manufacture (such as Dulex/Asian Paints/Sherwin Willans) including applying one coat of cement primer and one coat of surface treatment etc. complete.
23Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm.
24c) 80 mm thick in all colours except grey
25Add 20% adhoc increase on Rs. 1807882.20
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail