Tender For Bearing Taper Roller - 06 Items, bangalore-Karnataka

Supply Of Bearing Taper Roller - 06 Itemsbearing Taper Roller - 06 Items,Bearing No Nj 230 Of Skf/Fag/Ntn/Timken Make Only With Metallic Cage For Kind Attention Of Tenderers:- Special Conditions For Purchase Of Bearings 1)Vendors Are Required To Quote Only For The Brands They Are Approved For. If Other Than Approved Brands Are Offered, The Offer Shall Be Supported By Authorization Certificate From The Manufacturers. 2)The Authorized Agents Shall Supply Bearings With Original Manufacturers Tamper Proof Seal. 3)The Authorized Agents Shall Furnish Inspection Certificate From Manufactures Or Their Authorised Testing Agents, Preferably Incorporating The Details Of Traceability Of The Products Proposed For Supply. 4)Tenderers Are Required To Quote For The Following Makes Only: Skf, Fag, Ntn,Timken As Per Description Tendered. 5)Non Compliance Of Any Of The Conditions By The Tenderer May Result In Their Offer Getting Ignored. , Single Row Thrust Ball Bearing No-51312 (Steel Cage) Make Skf/Fag/Ntn/Only. Note:1)Relevant Catalogue Of The Offered Bearing Shall Accompany The Offer 2)Acceptance Of The Special Conditions/ Deviations If Any From The Special Conditions Shall Be Clearly Brought Out In The Offer. , Bearing Taper Roller Timken Make No.377Td/374 (Inner Outer Pt.No.)Double Inner Race With Taper Bore Dia 52.14 Taper Bore,Od 93.269,Width 53.188Mm With Spacer Yis-374. Make:- Skf, Timken, Nachi, Koyo, Fag, Ntn Only. Special Conditions: 1. Vendors Are Required To Quote Only For The Brands They Are Authorized For, The Offer Shall Be Supported By Authorization Certificate From The Manufacturer. 2. The Tenderers Are Required To Quote For The Above Mentioned Makes Only. 3. Non Compliance Of The Conditions By The Tenderer May Result In Their Offer Getting Ignored , Winco Make 2 Bolt, Solid Base Plummer Block Saf 511 Of Make:Winco/Skf/Ntn/Fag With Triple Seals And Locating Ring Fitted With Drsa Roller Bearing No. 22211 K With Steel Cage To Suit Shaft Dia 50Mm Of Make Skf/Fag/Ntn And Adapter Sleeve H 311 Of Make M&M /Cosmo/Sibco/J&J/Zkl/Amr. , Pillow Block Wmp-40 Of Winco Make Or Ucp-212-207D1 Of Ntn Make With Bearing To Suit 2 7/16 Diameter Shaft, Bearing Make: Skf/Fag/Ntn , Two Bolt Solid Base Plummer Block Fsaf 510 Of Make:Winco/Skf/Ntn/Fag Fitted With Triple Seals Double Row Self Aligning Spherical Roller Bearing No.22210Cck With Steel Cage Of Make M/S.Skf/Fag/Ntn Along With Adapter And Sleeve To Size He 310 Of Make:M&M/Cosmo/Sibco/J&J/Zkl/Amr And Locating Rings. => Limited

Refer document

Refer document

Refer document

Sl. No.	Item Description
1	Bearing Taper Roller - 06 Items
2	BEARING NO NJ 230 OF SKF/FAG/NTN/TIMKEN MAKE ONLY WITH METALLIC CAGE FOR KIND ATTENTION OF TENDERERS:- SPECIAL CONDITIONS FOR PURCHASE OF BEARINGS 1)Vendors are required to quote only for the brands they are approved for. If other than approved brands are offered, the offer shall be supported by authorization certificate from the manufacturers. 2)The authorized agents shall supply bearings with original MANUFACTURERS TAMPER PROOF SEAL. 3)The authorized agents shall furnish Inspection certificate from MANUFACTURES OR THEIR AUTHORISED TESTING AGENTS, preferably incorporating the details of traceability of the products proposed for supply. 4)Tenderers are required to quote for the following makes only: SKF, FAG, NTN,TIMKEN as per description tendered. 5)Non compliance of any of the conditions by the tenderer may result in their offer getting ignored.
3	SINGLE ROW THRUST BALL BEARING NO-51312 (STEEL CAGE) MAKE SKF/FAG/NTN/ONLY. NOTE:1)RELEVANT CATALOGUE OF THE OFFERED BEARING SHALL ACCOMPANY THE OFFER 2)ACCEPTANCE OF THE SPECIAL CONDITIONS/ DEVIATIONS IF ANY FROM THE SPECIAL CONDITIONS SHALL BE CLEARLY BROUGHT OUT IN THE OFFER.
4	"BEARING TAPER ROLLER TIMKEN MAKE NO.377TD/374 (INNER OUTER PT.NO.)DOUBLE INNER RACE WITH TAPER BORE DIA 52.14 TAPER BORE,OD 93.269,WIDTH 53.188MM WITH SPACER YIS-374." MAKE:- SKF, TIMKEN, NACHI, KOYO, FAG, NTN ONLY. SPECIAL CONDITIONS: 1. VENDORS ARE REQUIRED TO QUOTE ONLY FOR THE BRANDS THEY ARE AUTHORIZED FOR, THE OFFER SHALL BE SUPPORTED BY AUTHORIZATION CERTIFICATE FROM THE MANUFACTURER. 2. THE TENDERERS ARE REQUIRED TO QUOTE FOR THE ABOVE MENTIONED MAKES ONLY. 3. NON COMPLIANCE OF THE CONDITIONS BY THE TENDERER MAY RESULT IN THEIR OFFER GETTING IGNORED
5	WINCO MAKE 2 BOLT, SOLID BASE PLUMMER BLOCK SAF 511 OF MAKE:WINCO/SKF/NTN/FAG WITH TRIPLE SEALS AND LOCATING RING FITTED WITH DRSA ROLLER BEARING NO. 22211 K WITH STEEL CAGE TO SUIT SHAFT DIA 50MM OF MAKE SKF/FAG/NTN AND ADAPTER SLEEVE H 311 OF MAKE M&M /COSMO/SIBCO/J&J/ZKL/AMR.
6	PILLOW BLOCK WMP-40 OF WINCO MAKE OR UCP-212-207D1 OF NTN MAKE WITH BEARING TO SUIT 2 7/16" DIAMETER SHAFT, BEARING MAKE: SKF/FAG/NTN"
7	TWO BOLT SOLID BASE PLUMMER BLOCK FSAF 510 OF MAKE:WINCO/SKF/NTN/FAG FITTED WITH TRIPLE SEALS DOUBLE ROW SELF ALIGNING SPHERICAL ROLLER BEARING NO.22210CCK WITH STEEL CAGE OF MAKE M/S.SKF/FAG/NTN ALONG WITH ADAPTER AND SLEEVE TO SIZE HE 310 OF MAKE:M&M/COSMO/SIBCO/J&J/ZKL/AMR AND LOCATING RINGS.