|
| 1 | Earth work excavation for foundation in ordinary soil with initial lead and lift etc., complete |
| 2 | Open excavation |
| 3 | Narrow excavation |
| 4 | Collection and supply of coarse gravel including cost and conveyance from approved quarry to site and stacking to departmental gauge etc., complete. |
| 5 | Filling with coarse gravel in layer of 15mm thick including watering and ramming to consolidation etc., complete. |
| 6 | Supplying and filling with M.sand in layers of 15cm thick including watering and ramming to consolidation including cost and conveyance of sand and filling etc complete as per standard specification |
| 7 | Plain cement concrete 1:5:10 mix using 40mm ISS gauge HBBG metal for foundation and flooring including curing dewatering and all other labour charges etc., complete |
| 8 | Providing steel centering and shuttering with strutting arrangements for sides and soffits etc., complete |
| 9 | With out strutting |
| 10 | For Column & Sunshade Ground Floor Level Upto 3.30m heigth |
| 11 | For Column & Sunshade Ground Floor Level Upto 3.30m - 4.30 heigth |
| 12 | With strutting upto 3.30m height |
| 13 | Supply cutting Bending tying and fixing in position of MS (or) RTS grills for RCC work Including cost of steel and binding wire etc., complete |
| 14 | Reinforced cement concrete 1:2:4 mix (one cement two M.sand & four 20mm metal) using 20mm ISS gauge HBBG metal including cost of all materials and labour charge but excluding cost of reinforcement and binding wire etc., complete. |
| 15 | Below Ground Level |
| 16 | Ground Floor upto 4.5m Height |
| 17 | Brick work in cement mortar 1:5 mix using Country Bricks (8 3/4\" x 41/4\" x 23/4\") including cost of materials and labour charges etc. as per std. specification |
| 18 | For Foundation and Basement |
| 19 | For Super Structure upto 4.50m Ground Floor |
| 20 | Special Ceiling Plastering for RC slabs and beams with cement mortar 1:3 mix 10mm thick including hacking etc., complete |
| 21 | Plastering with Cement Mortar 1:5 mix 12mm thick including hacking etc., complete |
| 22 | Weathering coarse with concrete broken brick jelly 20mm size in pure slacked lime over RCC slab the proportion of brick jelly to lime being 32:12.5 well beaten with wooden beaters giving required slope and thickness etc., complete. |
| 23 | Finishing the top with one coarse of pressed tiles of size 20cm x 20cm x 20mm thick lain cement mortar 1:3 mix with water proofing compound as per Indian std., specification 2% by weight of cement used and pointing with same mortar etc., complete. |
| 24 | Supplying and fixing in position White / Colour Special Delux Model Glazed Cascade Type Parryware / Hindware / Equivalent Wall Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc.,including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, suchas, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry andre-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) with 10 litres capacity flushing tank with all internal dual flush fittings with normal seat cover etc., complete |
| 25 | Supply and fixing in position of white glazed indian oriya type water closet 580 x 440mm size white glazed earthernware of approved quality with S or P trap confirming to IS: 2556-part XII with sand cusion and forming flooring around the closet using 40mm broaken brick jelly in lime concrete1:4:8 mix, 100mm thick using 20mm ISS gauge brick jelly and finished the top to required slop and including giving necessary connection to cast iron soil pipes by dismantling brick masonry, RCC/ floor slab and making good of the disturbed portion to original condition without leakage etc. complete complying with std. specifications and as directed by dept. officers. (the WC should got approved by the Exe. Engineer before use on works) |
| 26 | Supply & Fixing in position best quality approved make White glazed earthen ware wash hand basin of size 550 x 400mm with a pair of cast iron brackets, excluding cost of 15mm diameter brass chromium plated pillar tap, 32mm diameter C.P. Waste, 32mm diameter PVC waste pipe with rubber plug and chain, 15mm diameter GM Wheel valve, 15mm dia brass nipple, 15mm dia Nylon connection etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and painting the brackets with two coats of paint over a priming coat of anticorrosive paint including testing for leakage etc., complete |
| 27 | Construction of inspection chamber of size 1’ 1 ½” x 1’ 1 ½” as per T.P.No.18/1944 and of the description the foundation of the inspection chamber to be cement concrete 1:5:10 mix using 40mm metal and brick work in cement mortar 1:5 mix using country bricks and plastering with cement mortar 1:4 mix 12mm tk as per std. specification. |
| 28 | RCC 1:2:4mix using 20mm ISS gauge HBBG chips for pre cast slab of the 200mm thickness excluding cost of reinforcement grills in position but including moulding, casting, finishing and fixing in position etc., complete (50mm Thick) |
| 29 | Flooring with Stain free Nano polish Vetrified flooring Tiles 600x600x8mm of approved colour and qualityin cement mortar 1:3 mix and pointing with the same mortar etc. complete and finish very neatly etc.complete. |
| 30 | Dadooing the walls with Vetrified tiles of size 600 x 600 x 8mm thick laid in cement mortar 1:2 mix 10mm thick and pointing with white cement using 0.40 kg./cm2 including finishing the joint and pointing flush with tile surface etc. complete |
| 31 | Flooring with Cement based Hydraulically pressed Anti skid tiles (pattern design) - 20mm thick of approved colour and quality in cement mortar 1:3 mix and pointing with the same mortar etc. complete and finish very neatly |
| 32 | Dadooing the walls with ceramic tiles of size 200 x 200 x 6mm thick laid in cement mortar 1:2 mix 10mm thick and pointing with white cement using 0.40 kg./cm2 including finishing the joint and pointing flush with tile surface etc. complete |
| 33 | Flooring with ceramic tiles white color ceramic tiles of size 305 x 305 x 6mm with self bath way special color tiles in cement mortar 1:3 mix 10mm thick and pointing with white cement using at the rate of 0.45 kg/cm2 including finishing the joint neatly pointing flush with tiles surface etc., complete |
| 34 | Supply and fixing inposition of cuddapah slab of 50mmtk with machine cut edge on all sides except bottom line etc.complete. |
| 35 | Supply and fixing of UPVC glazed Openable Door made out ofhallow multi cambered UPVC sections and corners & joint portions are mitre cut and fusion welded. The Outer frame of the Door shall be made out of UPVC sections having size of 104x60mm and the shutter frame shall be made out of UPVC sections having size of 72x60mm with necessary steel reinforcement at a hardware locations. The Top Glazing shall be of 5mm thick to be provided and Bottom shall be provided withUPVC panel of 8mm thick with single glaze beading shall be made out of size 34x18mm.and fixing with EPDMrubber beadingswith powder coated Handles,3D Hinges with multipoint locking system, including cost of all materials and labour charges for fixing in position etc., complete |
| 36 | Supplying Fabricating Fixing of UPVC open Window Frames of size 100 mm x 6 mm and 1.25 mm thick without bottom made from CRF section and rectangular hollow section with necessary rebated of 30 / 15 mm to house the shutters using cold rolled steel plate conforming to ISI specifications including rigid butt joint nut and bolt assembly with nylon inserts not to be welded with special purposes hardware precleaned including phosphating as per ISI with rust preventive primer and ready to assemble condition for easy installation at site including dismantlingmaking necessary with power drill to the accessories such as supplying and fixing holdfasts, plastic bush inserts receiver runner bottom shock absorbers etc. Complete |
| 37 | Supply and Fixing of Grill using MS Angle and Flats including one Coat of Red oxide Paint etc.., Complete. |
| 38 | Fabricating Supply and fixing and position of Solid panel PVC door with frame. The door outer frame will be 30x30x3mm square tubes intermediate stiffner will be 25x25x2 mm with cross stiffner 25x 25x2 mm flats covered with PVC sheet with necessary hinges, screws and hold fast etc., complete |
| 39 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on workUPVC Ventilator |
| 40 | Supplying and fixing of stainless steel pipe for handrail for staircase and elevation of following size of pipe using approved design and quality ofSS Pipe as directed by the departmentalofficers including cost of all materials and labourcharges etcc.complete. |
| 41 | Provision for Geological Investigation charge for suitable point of borewell including cost of transporting of geological survey instruments including all labour charges etc., complete |
| 42 | Drilling 4 1/2\" vertical bore in hard rock area to any required depth as dilled by the board officers including labour charges for inserting casing pipes assembly in the directed hole including welding the joints if necessary groutting the casing pipes etc., and including transporting from one place to another etc., complete |
| 43 | Supply of 150mm dia casing pipe etc., complete |
| 44 | Supply of Single phase submersible pumpset asper is 8034 without panel bord 1 H.P motor of size 15x100 etc., complete |
| 45 | Supply ofSingle phase panel board with two level guard and auto start 1 H.P etc., complete |
| 46 | Supply of 3 core 2.5sq.mm flat type copper cable conforming to IS 694/1990 etc., complete. |
| 47 | Labour charges for the erection of 1 to 5 HP submersible pumpset in bore well / open well including fixing and jointing and submersible cable fixing of riser pipes to the required depth valves, erection clamps, pressure gauge upto the exterior wall of the pump room and erection of panel board consisting of TPICN switch starter, voltmeter, Ammeter three pilot (indicating) lamps capacitor single phase preventor water level guard laying and jointing the cables and twin earthing as per I.E. Rules etc., complete and testing the pumpset on trial run as directed by departmental officers |
| 48 | Supply and laying of following water supply materials etc., complete |
| 49 | 32mm dia UPVC Pipe |
| 50 | 25mm dia UPVC Pipe |
| 51 | 20mm dia UPVC Pipe |
| 52 | 32mm dia UPVC Union |
| 53 | 25mm dia UPVC Union |
| 54 | 32mm dia UPVC Elbow |
| 55 | 25mm dia UPVC Elbow |
| 56 | 20mm dia UPVC Elbow |
| 57 | 32mm dia UPVC Tee |
| 58 | 25mm dia UPVC Tee |
| 59 | 20mm dia UPVC Tee |
| 60 | 32mm dia UPVC Coupling |
| 61 | 32mm dia GM Gate Valve |
| 62 | 25mm dia GM Gate Valve |
| 63 | Screw Down Tap |
| 64 | UPVC Adhesives |
| 65 | Supply and fixing of the following PVC Pipes and Specials etc., complete |
| 66 | 110mm dia PVC Pipe 6 Ksc |
| 67 | 110mm dia PVC Tee |
| 68 | 110mm dia PVC Coupler |
| 69 | 110mm dia PVC Bend |
| 70 | Solvent Cement |
| 71 | Laying and jointing of PVC pipe and specials to proper grade and alignment jointing with PVC coupler with cement paste and testing to the required pressure including conveyance of water for filling during testing excluding cost of materials (110mm Dia PVC Pipe) |
| 72 | Supply of 2000 lit PVC Tank etc.,complete |
| 73 | Supplying and fixing 110mm dia PVC rain water down fall pipe including cost of pipe, shoe, bond, brackets, teakwood plugs, etc., complete |
| 74 | White washing with 2 coats of best shell lime etc..omplete |
| 75 | Painting two coats with ready mixed plastic emulsion paint of 1st class quality and of approved color over a priming coat including through scraping clean removal of dirt etc., complete. |
| 76 | Supply and fixing of Non Magnetic Green Chalkboard with Lightweight Aluminium Frame (6x4 ft) including cost of transportation etc., complete |
| 77 | Painting and lettering for child educational awarness wall painting using necessary colour pigment and including cost of all materials and labour charges etc..complete. |
| 78 | Wiring with 2 x 1.5 sq.mm.(22Nos/0.3mmDia) PVCinsulated single core unsheathed copper conductor cable of 1100 Volt Grade in suitable PVC rigid pipes concelaed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with T.W. switch box and 5Amps Flush Type Switch and making good of the concealed portion with suitable colour for PVC concealed LIGHT / FAN point. (for electronic regulator) (% points per coil) (SD 24) |
| 79 | Wiring with 2 x 1.5 sq.mm.(22Nos/0.3mmDia) PVCinsulated single core unsheathed copper conductor cable of 1100 Volt Grade in suitable PVC rigid pipes concelaed in wall and ceiling with PVC accessories in flush with wall with 150mmx100mmx113mm T.W. switch box with 3mm thick hylem sheet cover for 5A 3pin non interlocking CS plug with continous earthwire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour forconcealed PVC plug point.(SD 38) |
| 80 | Wiring with 2 x 1.5 sq.mm.(22Nos/0.3mmDia) PVCinsulated single core unsheathed copper conductor cable of 1100 Volt Grade in suitable PVC rigid pipes concelaed in wall and ceiling with PVC accessories in flush with wall with 150mmx100mmx113mm T.W. switch box with 3mm thick hylem sheet cover for 15A 3pin non interlocking CS plug with continous earthwire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour forconcealed PVC Power plug point.(SD 40) |
| 81 | Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable color (SD-65) |
| 82 | Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1\" x 1/8\" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. (SD-125) |
| 83 | Supply and fixing of single box type 4.40 W flu fitting complete with copper choke and condensor with T.W. blocks on wall or ceiling with tube with PVC unsheathed copper leads from terminals to the fitting. (SD-88) |
| 84 | Supply&fixingof1200mm ACceilingfancompletesetwithstepedelectronicregulatorwithexistingclamp (SD-110) |
| 85 | Supply and fixing of 90cm dia R.C.C 1:2:4 mix of pipe collar with 30cm height and 5cm thick of ISI quality including transportation,loading and unloading and fixng inpostion as directed by the Departmental officersetc.,completeasperstdspecification. |
| 86 | Supply and filling of 40mm ISS Gauage HBBG Metal including cost of materials and labour charges for filling etc. complete asperstdspecification. |
| 87 | Conveyance of excavated earth and dismantled materials to a lead of 2km including loading unloading charges and filling up in the low lying area as directed by the departmental officers etc., complete |
