Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Civil works |
| 2 | Excavation in hardrock (blasting prohibited) with rock breakers including breaking rock, loading in tippers and disposal wihtin all lifts and lead upto 1000 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections as per direction of EIC. |
| 3 | Filling in foundation and plinth or floor with excavated earth or moorum or extra good earth including laying, watering and ramming in 23 Cm (9\") thick layers with all necessary leads and lifts complete inclusive of all cost of labour T&Petc. complete as per direction of EIC. |
| 4 | Filling foundation and plinth with river sand, well watered, rammed including cost, conveyance, royalties of materials, cost of all labour and T&P required for the work etc. complete as per direction of EIC. |
| 5 | P.C.C. of prop. (1:3:6) in foundation using 40 mm. size crusher broken hard granite metal of approved quality from approved quarry including lowering, laying concrete to required levels laid in layers not exceeding 150mm thick including cost, conveyance, royalties of all materials, watering and curing and cost of all labour, T&P required for the work etc. comp as per direction of EIC. |
| 6 | Fly ash brick masonry in C.M.(1:6) after immersing the bricks having minimum crushing strength of 75 Kg/Cm2 in water for 24 hours having size of 25cmx12cmx8cm in foundation & plinthwith ornamental molding and other similar type of works with all necessary projections, splays corbelling, cutting, champering, including cost conveyance, royalties of all materials, cost of all labour, T&P required for the work etc. compl. in all respect as per direction of EIC |
| 7 | R.C.C M-25 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills. in FOOTING |
| 8 | R.C.C M-25 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills. in PLINTH BEAM |
| 9 | R.C.C M-25 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills. in COLUMN (GF) |
| 10 | R.C.C M-25 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills. inCOLUMN(FF) |
| 11 | R.C.C M-25 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills. inCOLUMN (SF) |
| 12 | R.C.C M-25 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills. in LINTEL(GF) |
| 13 | R.C.C M-25 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills. inLINTEL (FF) |
| 14 | R.C.C M-25 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills. inLINTEL (SF) |
| 15 | R.C.C M-25 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills. in CHAJJA(GF) |
| 16 | R.C.C M-25 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills. in CHAJJA(FF) |
| 17 | R.C.C M-25 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills. in ROOF BEAM (GF) |
| 18 | R.C.C M-25 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills. inROOF BEAM(FF) |
| 19 | R.C.C M-25 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills. in ROOF BEAM(SF) |
| 20 | R.C.C M-25 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills. in SLAB (GROUND FLOOR) |
| 21 | R.C.C M-25 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills. in SLAB (FIRST FLOOR) |
| 22 | R.C.C M-25 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills. in SLAB (SECOND FLOOR) |
| 23 | R.C.C M-25 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills. in STAIR CASE (GF) |
| 24 | R.C.C M-25 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills. in STAIR CASE(FF) |
| 25 | Supplying HYSDbars of appd. Quality size and grade and cutting, bending, binding and tying the grills in proper position as required for the RCC workincluding cost,head load, conveyance of HYSD bars (Fe500) and binding wires of 18 to 20 gauge and cost of labour, T&P required to comp. in all respectas directed by the EIC. (Ground Floor) |
| 26 | Supplying HYSDbars of appd. Quality size and grade and cutting, bending, binding and tying the grills in proper position as required for the RCC workincluding cost,head load, conveyance of HYSD bars (Fe500) and binding wires of 18 to 20 gauge and cost of labour, T&P required to comp. in all respectas directed by the EIC. (First Floor) |
| 27 | Supplying HYSDbars of appd. Quality size and grade and cutting, bending, binding and tying the grills in proper position as required for the RCC workincluding cost,head load, conveyance of HYSD bars (Fe500) and binding wires of 18 to 20 gauge and cost of labour, T&P required to comp. in all respectas directed by the EIC.(Second Floor) |
| 28 | 2.5cm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips of approved quality from approved quarry including hoisting and laying concrete,watering and curingincluding cost, conveyance, royalities of all materials, cost of all labour, T & P required for the work etc.required to complete as per direction of EIC. (First Floor) |
| 29 | 2.5cm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips of approved quality from approved quarry including hoisting and laying concrete,watering and curingincluding cost, conveyance, royalities of all materials, cost of all labour, T & P required for the work etc.required to complete as per direction of EIC. (Second Floor) |
| 30 | Fly ash brick masonry in C.M.(1:6) having minimum crushing strength of 75 Kg/Cm2 size of 25cmx12cmx8cm in Superstructure with ornamental molding and other similar type of works with all necessary projections, splays corbelling, cutting, champering, including cost conveyance, royalties of all materials, cost of all labour, T&P required for the work etc. compl. in all respect as per direction of EIC. (Ground Floor) |
| 31 | Fly ash brick masonry in C.M.(1:6) having minimum crushing strength of 75 Kg/Cm2 size of 25cmx12cmx8cm in Superstructure with ornamental molding and other similar type of works with all necessary projections, splays corbelling, cutting, champering, including cost conveyance, royalties of all materials, cost of all labour, T&P required for the work etc. compl. in all respect as per direction of EIC. (First Floor) |
| 32 | Fly ash brick masonry in C.M.(1:6) having minimum crushing strength of 75 Kg/Cm2 size of 25cmx12cmx8cm in Superstructure with ornamental molding and other similar type of works with all necessary projections, splays corbelling, cutting, champering, including cost conveyance, royalties of all materials, cost of all labour, T&P required for the work etc. compl. in all respect as per direction of EIC. (Second Floor) |
| 33 | C.C. of prop. (1:2:4) in allfloors using 12mm (1/2”) size hard crusher broken granite chips of appd. Quality from appd. quarry including centering, shuttering to wall side & lowering, laying, concrete, watering and curing etc. comp. to required levels laid in layers not exceeding 150mm thick including cost, conveyance, royalties of all materials and cost of all labour, T&P required for the work etc. complete as per direction of EIC (Ground Floor ) |
| 34 | 12mm (1/2\") thick cement plaster with C.M (1:6) for finished smooth to masonry surface of brick walls after racking out the joints including watering and curing etc. comp. with cost conveyance, royalty of all materials and cost of all labour, T&P scaffolding required for the work complete as per the direction of EIC. (Ground Floor) |
| 35 | 12mm (1/2\") thick cement plaster with C.M (1:6) for finished smooth to masonry surface of brick walls after racking out the joints including watering and curing etc. comp. with cost conveyance, royalty of all materials and cost of all labour, T&P scaffolding required for the work complete as per the direction of EIC.(First Floor) |
| 36 | 12mm (1/2\") thick cement plaster with C.M (1:6) for finished smooth to masonry surface of brick walls after racking out the joints including watering and curing etc. comp. with cost conveyance, royalty of all materials and cost of all labour, T&P scaffolding required for the work complete as per the direction of EIC.(Second Floor) |
| 37 | 16mm (5/8\") thick cement plaster with C.M (1:6) for finished smooth to inside surface of brick walls after racking out the joints including watering and curing etc. Complete. with cost , conveyance, royalty of all materials and cost of all labours, T&P scaffolding required for the work complete as per direction of EIC. (Ground Floor) |
| 38 | 16mm (5/8\") thick cement plaster with C.M (1:6) for finished smooth to inside surface of brick walls after racking out the joints including watering and curing etc. Complete. with cost , conveyance, royalty of all materials and cost of all labours, T&P scaffolding required for the work complete as per direction of EIC. (First Floor) |
| 39 | 16mm (5/8\") thick cement plaster with C.M (1:6) for finished smooth to inside surface of brick walls after racking out the joints including watering and curing etc. Complete. with cost , conveyance, royalty of all materials and cost of all labours, T&P scaffolding required for the work complete as per direction of EIC. (Second Floor) |
| 40 | 6 mm thick cement plaster in C.M. (1:4) over RCC surface including watering, curing and cost, carriage of all materials, cost of all labour, T&P required to complete as per direction of EIC. (Ground Floor) |
| 41 | 6 mm thick cement plaster in C.M. (1:4) over RCC surface including watering, curing and cost, carriage of all materials, cost of all labour, T&P required to complete as per direction of EIC. (First Floor) |
| 42 | 6 mm thick cement plaster in C.M. (1:4) over RCC surface including watering, curing and cost, carriage of all materials, cost of all labour, T&P required to complete as per direction of EIC. (Second Floor) |
| 43 | Supplying all materials, labour, T&P and fixing vitrified floor tile of 600mmx600mm size of approved brand and shade on 25mm thick cement mortar (1:4) (1 cement:4 sand)jointed with neat cement, slurry mixed with pigment to match the shed of tiles complete as per specification and direction of EIC including cost, carriage of all materials cost of all labour, T&P required to complete the work. (Tiles should be of Kajari/ Somany/ RAK / Johnson).(Ground Floor) |
| 44 | Supplying all materials, labour, T&P and fixing vitrified floor tile of 600mmx600mm size of approved brand and shade on 25mm thick cement mortar (1:4) (1 cement:4 sand)jointed with neat cement, slurry mixed with pigment to match the shed of tiles complete as per specification and direction of EIC including cost, carriage of all materials cost of all labour, T&P required to complete the work. (Tiles should be of Kajari/ Somany/ RAK / Johnson) (First Floor) |
| 45 | Supplying all materials, labour, T&P and fixing Acid resistancefloor tile of 300mm x300mm size of approved brand and shade on 25mm thick cement mortar (1:3) (1 cement:3 sand) jointed with neat cement, slurry mixed with pigment to match the shed of tiles complete as per specification and direction of EIC including cost, carriage of all materials cost of all labour, T&P required to complete the work. (Tiles should be of Kajari/ Somany/ RAK / Johnson) (Ground Floor) |
| 46 | Supplying all materials, labour, T&P and fixing of 16mm thick Black Granite tile of approved quality and size in floor & steps on 12mm thick cement plaster (1:3) jointed with neat cement, slurry mixed with pigment to match the shed of tiles including rubbing and polishing complete as per specification and direction of EIC including cost, carriage all materials and cost of all labour, T&P required to complete the work.(Ground Floor) |
| 47 | Supplying all materials, labour, T&P and fixing of 16mm thick Black Granite tile of approved quality and size in floor & steps on 12mm thick cement plaster (1:3) jointed with neat cement, slurry mixed with pigment to match the shed of tiles including rubbing and polishing complete as per specification and direction of EIC including cost, carriage all materials and cost of all labour, T&P required to complete the work (First Floor) |
| 48 | Supplying all materials, labour, T&P and fixing Ceramic wall tile of 200mmx300mm size of approved brand and shade in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement, slurry mixed with pigment to match the shed of tiles including rubbing and polishing complete as per specification and direction of EIC including cost, carriage of all materials cost of all labour, T&P required to complete the work.(Tiles should be of Cengress / Kajari/ Orient Bell/ Somany/ RAK) (Ground Floor) |
| 49 | Supplying all materials, labour, T&P and fixing Ceramic wall tile of 200mmx300mm size of approved brand and shade in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement, slurry mixed with pigment to match the shed of tiles including rubbing and polishing complete as per specification and direction of EIC including cost, carriage of all materials cost of all labour, T&P required to complete the work.(Tiles should be of Cengress / Kajari/ Orient Bell/ Somany/ RAK)(First Floor) |
| 50 | Supplying all materials, labour, T&P and fixing Acid resistancefloor tile of 300mm x300mm size of approved brand and shade on 25mm thick cement mortar (1:3) (1 cement:3 sand)jointed with neat cement, slurry mixed with pigment to match the shed of tiles complete as per specification and direction of EIC including cost, carriage of all materials cost of all labour, T&P required to complete the work. (Tiles should be of Kajari/ Somany/ RAK / Johnson)(Ground Floor) |
| 51 | Finishing wall surface with Acrylic wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, cost of all labour T&P etc. complete as per direction of EIC. (Make SG England/ J.K./Birla) (Ground Floor) |
| 52 | Finishing wall surface with Acrylic wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, cost of all labour T&P etc. complete as per direction of EIC. (Make SG England/ J.K./Birla) (First Floor) |
| 53 | Finishing wall surface with Acrylic wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, cost of all labour T&P etc. complete as per direction of EIC. (Make SG England/ J.K./Birla) (Second Floor) |
| 54 | Painting two coats with approved brand of acrylic plastic emulsion paint of approved shade and quality over a coat of approved primer to give an even shade to surface of wall including cost of paint, primer, scaffolding, cost of all labour and materials required for the work etc. complete (Paint of Burger / Nerolac/ J&N/ and Asian ICI brand to be used)(Ground Floor) |
| 55 | Painting two coats with approved brand of acrylic plastic emulsion paint of approved shade and quality over a coat of approved primer to give an even shade to surface of wall including cost of paint, primer, scaffolding, cost of all labour and materials required for the work etc. complete (Paint of Burger / Nerolac/ J&N/ and Asian ICI brand to be used)(First Floor) |
| 56 | Painting two coats with approved brand of acrylic plastic emulsion paint of approved shade and quality over a coat of approved primer to give an even shade to surface of wall including cost of paint, primer, scaffolding, cost of all labour and materials required for the work etc. complete (Paint of Burger / Nerolac/ J&N/ and Asian ICI brand to be used). (Second Floor) |
| 57 | Weather coat two coats of approved brand and shade overa coat of primer over exterior surface of wall exposed to weather including cost of brush, scaffolding, staging charges with cost, conveyance of all materials, cost of all labour, T&P etc. complete as directed by EIC. (Weather coat should of ICI/Berger/Asian is to be used) (Ground Floor) |
| 58 | Weather coat two coats of approved brand and shade overa coat of primer over exterior surface of wall exposed to weather including cost of brush, scaffolding, staging charges with cost, conveyance of all materials, cost of all labour, T&P etc. complete as directed by EIC. (Weather coat should of ICI/Berger/Asian is to be used) (First Floor) |
| 59 | Weather coat two coats of approved brand and shade overa coat of primer over exterior surface of wall exposed to weather including cost of brush, scaffolding, staging charges with cost, conveyance of all materials, cost of all labour, T&P etc. complete as directed by EIC. (Weather coat should of ICI/Berger/Asian is to be used) (Second Floor) |
| 60 | Providing and fixing of gyp board suspended false ceiling (single layers) in different levels, recesses, flat areas as per design with G.I. Framework ( of perimeter channels, intermediate channels and ceiling sections) and 12.5mm taped edge gyp board screw fixed to ceiling section as per design, complete with fixing and finishing of tapered and square edges of board with jointing compound paper tape and 2 coats of suitable primer including all cost, of materials, labour, overheads, T&P etc. complete as per direction of EIC.(Make: India Gypsum / Armstrong / Everestmake) |
| 61 | Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with DuneSupreme (Bevelled Tegular) Edge Tiles With Armstrong 15mmExposed GRID. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance =85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 16mm , suitable for Green Building application, with Recycled content of 44%. The tile shall be laid on Armstrong Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 45mm and a load carrying capacity of minimum 15.68Kgs/M2 & minimum pull out strength of 100 Kgs..Silhouette, Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong make. The Tile & Grid system used together should carry a 30 year warranty.To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit using Armstrong suspension system (specifications below) at 1200mm maximum centre.The First/Last Armstrong suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall.Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module.Cut cross tees longer than 600mm require independent support.600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees.Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centres. |
| 62 | Supplying all materials, labour and T&P for Steel work in built up tubular (Square & Rectangular hollow tubes etc. i.e SHS & RHS of different sizes) in column, trusses (60\"-0\" Span), purlins etc., including cutting, hoisting, fixing in position including welding and bolted with special shaped washer etc. using required size of MS Base plate 50mm thick and Gusset plate of 8-10 mm thick as per detail design and as per site requirements. The welding / bolting surface to be finished after positioning of trusses including all cost of materials, scaffolding, labour T&P etc complete as per drawing and direction of EIC. |
| 63 | Painting two coats with approved brand of synthetic enamel paint of approved shade and quality over a coat of approved primer to iron works including cost of paint, primer, putty, scaffolding, T&P, cost, conveyance, cost of all materials and cost of all labour required for the work etc. complete as per the direction of EIC. (Paints of Burger/Nerolac/J&N /Asian/ ICIBrand is to be used.).(2nd floor) |
| 64 | Supply, fitting fixing of WPC shutter with 5\"x2.5\" WPC chowkathsProviding and fixing of35mm thickWPC Door Shutter(Solid) with pvc edge leaping to the periphery of the shutter with lamination filishing all aroung as per detailed drawing with including, all hardwares & fixtures, SS tower bolt(150mm),Door stopper,SS aldrop(250mm),SS handle(200mm length),ss handle (150mm length) & SS Butt hinges -125mm x 65mm x2.12mm .including cost, conveyance, loading, T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge |
| 65 | Supplying fitting and fixing in position 32mm thick Partially glazed flush doorwith teak wood beading and 1mm thick sunmica to both side pasted with adhessive and provision of 8mm thick toughen glass with itching including fixing of fixtures like Godrej make Mortice lock having model no 9168, Godrej make Door closure having model no 8340, 100mm aluminium hinges, handle, tower bolt, stopper including cost of all materials, labour, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. |
| 66 | Providing and fixing of Swing Door of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6mm thick \"D\" quality, galvanized as per IS-277 with zinc of 120 Gm/ Sq.mtr) with paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black / Pearl White /Choclate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 33x57 mm and shutter being of 46x52 mm and 46x46mm and lock rail should be of 23 x 130mm. Accessories / gaskets are to be used as per the manufacturers supply and specification like handle, lock and floor spring of approved quality, Gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phophating. The sections are to be cut to length, mitre joined with corner bracket and frames are fixed to the concrete / masonry walls by means of self expanding screws and glass to be used of 12mm clear with all taxes etc. complete as per direction of EIC. (Make :- Saint Gobin or equivalent) |
| 67 | Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter. The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded). |
| 68 | Providing and fixing of WPC chowkath 125x75mm with 35mm thick WPC Door Shutter(Solid) with PVC edge leaping to the periphery of the shutter with laminated filishing all around as per detailed drawing with including, all hardwares & fixtures, SS tower bolt(150mm),Door stopper,SS aldrop(250mm),SS handle(200mm length),ss handle (150mm length) & SS Butt hinges -125mm x 65mm x2.12mm .including cost, conveyance, loading, T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge. (Make :- Green/Archidply/Century) |
| 69 | Providing and fixing factory made uPVCWhite Colour three track three panel sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panel), comprising of uPVC multi chambered frame with in built roller track and sash extruded profiles duly reinforced with 1.60+/-.2 mm thick galvanized mild steel section made from roll forming process of required length, appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks , EPdm gasket, woolpile, zinc alloy (white powder coated) touch locks with hooks , zinc alloy body with single nylon rollers, GI fasteners 100*8 mm size for fixing frame to finished wall and necessary stainless steel screw etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners , including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant of approved quality, all complete as per drawings and direction of EIC. (Makes: WINTECH / FENESTA / LG/ BUILTIFY) |
| 70 | Supplying , fitting and Fixing of Stainless steelof 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90 mtr C/C and stainless steel square pipe bracing of size 32mm x 32mm x 2mm in three rows in staircase as per approved design and specification , buffing, polishing etc. with cost, conveyance, ,es of all materials, labour, T&P, etc. required for the complete in all respects. |
| 71 | Supplying all materials, labour, T & P and fitting and fixing 15mm dia C.P long body bib cockwithsupply of all jointing materials complete as per specification and direction of the Engineer - in - charge.(Make:Jaquare FLR - 5047N) |
| 72 | Supplying all materials, labour, T & P and fitting and fixing 15mm dia C.P pillar cock withsupply of all jointing materials complete as per specification and direction of the Engineer - in - charge.(Make: Jaquare FLR- 5011N) |
| 73 | Supplying all materials, labour, T&P and fitting & fixing 15mm dia CP angular stop cock with supply of or jointing materials completeas per specification and direction of the Engineer in charge (Make: Jaquare FLR- 5053N) |
| 74 | Supplying all materials, labour, T & P and fitting and fixing 15mm dia C.P concealed stop cock with supply of all jointing materials complete as per specification and direction of the Engineer - in - charge(Make: hindware Cat. No.: F520007) |
| 75 | Supplying all materials, labour, T & P and fitting and fixing 15mm CP 2 way bib cock with C.P.Health Flushet with supply of all jointing materials complete as per specification and direction of the Engineer - in - charge. (Make:- JaquareFLR-5041N) |
| 76 | Supplying, fitting and fixing of 40mm dia CPflush valve including all cost of labour,T&P etc complete.Providing all materials, labour,T&P and fittings and fixing of 40mm dia CPflush valve of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.( Make : JaquareFLV-1089NG ) |
| 77 | Supplying all materials, labour, T&P and fitting and fixing 2\" x 1/2\" CP shower with holder arm 6\" arm inlet including polishing all completeas per PH specification and direction of the Engineer in charge. (Make : Jaquare HSH-9537N) |
| 78 | Supplying and Fixing Double Coat hook fixed to wooden plugs with Chromium Plated brass screws as per specification of Architect /Engineer in charge.( Jaquare ACN-1161N ) |
| 79 | Providing, fixing, Testing and Commissioning of Soap Dish fixedwith CP brass screwincluding cutting and making good the wall wherever required complete with all parts and internal fittings of approved make with ISI mark and supplying of necessary brackets, screws etc as per PH specification all complete as per direction of Engineer-in-charge.(Jaqure ACN-1131N Soap Dish Holder) |
| 80 | Providing, fixing, Testing and Commissioning of Towel Ring fixedwith CP brass screw completeincluding cutting and making good the wall wherever required complete with all parts and internal fittings of approved make with ISI mark and supplying of necessary brackets, screws etc as per PH specification all complete as per direction of Engineer-in-Charge. (Make : Jaquare ACN-1111SM ) |
| 81 | Supplying all materials, labour, T & P and fixing standard sized toughen glass-shelf (600 x 125mm with glass) with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer - in - charge. (Make: Hindware F840011) |
| 82 | Fixing Wash down water closet, (European type W.C Pan) single PC with integral S or P trap& cystern etc all complete as per specification & fixing of plastic seat & cover for wash down water closet with chormium plated brass hinges and rubber buffers all complete as per specifications. (Make-HINDWARE ELBA 92037) |
| 83 | Supplying all materials, labour, T&P and fitting & fixing 15mm dia C.P health faucet with supply ofjointing materials completeas per specification and direction of the Engineer in charge. (Make:- Jaquare ALD-577) |
| 84 | Supplying all material, labour T&P and fixtures for providing and fixing of white glazed vitreous chinaware counter top wash hand basin of size 40x40x10cm dia ofapproved make with bottle trap with CP waste coupling nut and 15mm x 450mm PVC connection pipewith MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty andof all materials etc. complete as per PH specification and direction of Engineer-in-charge. (Make:- Jaquare SLS-WHT-6601) |
| 85 | Supplying all materials, labour, T&P and fixing 600mmx450mm size B.E Mirror( fixed type) over 6mm thick WPC board backing with supply of all jointing materials complete as per PH specification and direction of EIC (materials to be approved by the EIC before use) (Make-Saint Gobin/ Modi/ Golden Fish / Silver Fish). |
| 86 | Supplying all materials, labour, T&P and fitting fixing of 2000 ltr. Capacity double layer PVCwater tank(Sintex make ) over roof slab in proper position including providing over flow, wash out, extra socket jam nut if required complete as per specification and direction of Engineer-in-Charge including cost, carriage, taxes of all materials, cost of labour, T&P required to complete the work as per direction of EIC. |
| 87 | Supplying all materials, labour, T&P for fitting and fixing and laying 25mm dia (Sh-80) UPVC pipes and fittings including supply of all jointing materials like Gaskets, adhesive, solvent, cement etc and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including earth work in all kind of soil & rock & refilling the trenches including testing etc as per PHspecification and direction of the Engineer in charges. (Make:- Supreme / Oriplast / Hariplast) |
| 88 | Supplying all materials, labour, T&P for fitting and fixing and laying 20mm dia (Sh-80) UPVC pipes and fittings including supply of all jointing materials like Gaskets, adhesive, solvent, cement etc and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including earth work in all kind of soil & rock & refilling the trenches including testing etc as per PHspecification and direction of the Engineer in charges. (Make:- Supreme / Oriplast / Hariplast)( Supreme/ Oriplast/ Hariplast) |
| 89 | Fixing of 20mm dia Brass/GM Fulway Valve confirming toIS : 781-1995 of approved makeas per specification complete as per direction of Er-in-charge. 20mm dia brass or gun metal full way valve. (Make- Shakti / ZOLOTO.).(Zoloto 25 mm Screwed Bronze Globe Valve 1001) |
| 90 | Supplying all materials, labour, T&P for fitting and fixing and laying 110mm dia PVC vent pipes class-II (4kg per cm2) including supply of all jointing materials like Gaskets, adhesive, solvent cement etc and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including testing etc as per PHspecification and direction of the Engineer in charges. (Make:ORIPLAST/ Hariplast / Supreme) |
| 91 | Supplying all materials, labour, T&P for fitting & fixing and laying 110mm dia PVC cowel including supply of all jointing materials like gaskets, adhesive ,solvent cement etc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including scaffolding, testing etc. as per direction of EIC. (Make:ORIPLAST/ Hariplast / Supreme) |
| 92 | Supplying all materials, labour, T&P for fitting and fixing of 110 mm dia PVC floor trap with CP grating of approved make including supply all jointing material like gasket, adhesive, solvent cement etc and fitting to walls with nails,bobbins and wooden plugs as perspecification and direction of the Engineer in charges (Make :- Oriplast / Hariplast/ Supreme / Astral) |
| 93 | Supplying all materials, labour, T&P for fitting and fixing of 110 mm dia PVC Tee approved make including supply all jointing material like gasket, adhesive, solvent cement etc and fitting to walls with nails,bobbins and wooden plugs as perspecification and direction of the Engineer in charge (Make :- Oriplast / Hariplast/ Supreme / Astral) |
| 94 | Supplying all materials, labour, T&P for fitting & fixing and laying 110mm dia PVC Door bend ofincluding supply of all jointing materials like gaskets, adhesive, solvent cementetc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including scaffolding, testing etc. as per direction of EIC.(Make:ORIPLAST/ Hariplast / Supreme) |
| 95 | Supplying all materials, labour, T&P for fitting & fixing and laying 110mm dia PVC plain bend ofincluding supply of all jointing materials like gaskets, adhesive, solvent cementetc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including scaffolding, testing etc. as per direction of EIC.(Make:ORIPLAST/ Hariplast / Supreme) |
| 96 | Supplying all materials, labour, T&P for fitting and fixing and laying 110mm dia PVC pipes class-II (4kg per cm2) with all fittings of without hunching with CC 1:4:8 and top haunchinh with chips concrete in C.C (1:3:6) including supply of all jointing materials like Gaskets, adhesive, solvent, cement etc and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including earth work in all kinda of soil & rock & refilling the trenches including testing etc as per PHspecification and direction of the Engineer in charges. (Make:ORIPLAST/ Hariplast / Supreme) |
| 97 | Supplying all materials, labour, T&P for fitting and fixing and laying 110mm dia PVC pipes class-II (4kg per cm2) with all fittings of with hunching with CC 1:4:8 and top haunching with chips concrete in C.C (1:3:6) including supply of all jointing materials like Gaskets, adhesive, solvent, cement etc and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including earth work in all kinda of soil & rock & refilling the trenches including testing etc as per PHspecification and direction of the Engineer in charges. (Make:ORIPLAST/ Hariplast / Supreme) |
| 98 | Supplying all labour and materials for Construction of manhole chamber ofSize 760mmX760mmX460mm, earth work excavation in all kinds of soil C.C (1:3:6) with hard stone metal of size 25mm to 50mm on bed benching with C.C (1:2:4) with black hard granite chips of 12mm to 20mm, brick work using K.B.Bricks having crushing strength not less than 75 Kg. per cm2 in C.M (1:6), 12mm cement plaster (1:3) inside the manhole chamber and over benching, cement flush pointing (1:3) to outside of the manhole, providing R.C.C roof slab with C.C (1:2:4) with broken hard granite chips 12mm to 20mm, bending, binding and tying the grills and centering and shuttering, providing C.I. manhole cover 450mm of 50 Kg. weightincluding painting the C.I. manhole cover and step iron with two coats and anti corrosive paint and filling the cavity along the manhole chamber with excavated earth, including channeling the bed of manhole etc. complete as per P.H specification. |
| 99 | Construction 25 (3.0 mtr x 1.80 mtr x 1.80 mtr) user Septic tank of approved size and drawing with C.C (1:3:6) in foundation with 1st class K.B .Brick in C.M (1:4), 12mm thick C.P in C.M (1:4), C.C (1:2:4) using 12mm size h.b.g chips in floors with R.C.C (1:1½:3) Baffle wall, cover slab of thickness 100mm with C.I manhole cover, 20mm dia iron steps complete as per PH specification and direction of EIC. (The drawing and design will be supplied by EIC) |
| 100 | Supplying all materials labour, T&P for construction of soak way pit of size (1.5m x 2.5m) with dry brick masonry for soak pit & 1st class K.B. Bricks masonry in C.M. (1:6) with C.P (1:4) inside and outside of septic tank & filled with dry brick khoa 4cm to 5cm to height of 0.85m from the bottom covered by means of 4cm thick RCC slab of 5cm thick RCC slab cover in three pieces fitted with iron handles including earth work in excavation, CC (1:4:8) & PCC (1:2:4) and refilling the sand around the pit and painting the iron works etc as per approved drawing & design supply & as per the direction of EIC. |
| 101 | Electrical Works |
| 102 | Recessed wiring to light point /fan point/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic 1.6mm thick PVCconduit with 6 Amp, 250 V clip in type modular switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size ,with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection as per direction of Engineer in Charge.(length-4mtr) Primary Point. |
| 103 | Recessed wiring to light point /fan point/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic 1.6mm thick PVCconduit withceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size ,with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection as per direction of Engineer in Charge.(length-4mtr) Secondary Point. |
| 104 | S/F of 5 / 6 amp modular socket outletwith6Amp, 250 V clip in type modular switch ISI markedmounted on existingG.I moular box with face plate & cover of suitable sizeincluding all accessories and connection on same switch board as per direction of Engineer in Charge. |
| 105 | Recessed wiring to socket point with 5 / 6 amp modular socket outlet with 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic 1.6mm thick PVCconduit with 6Amp, 250 V clip in type modular switch ISI markedmounted on 3module G.I moular box with face plate & cover of suitable size ,with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection on separate board as per direction of Engineer in Charge. |
| 106 | S/F of 2X 5 / 6 amp modular socket outletwith2X6Amp, 250 V clip in type modular switch ISI markedmounted on separateG.I moular box with face plate & cover of suitable sizeincluding all accessories and connection on same switch board as per direction of Engineer in Charge for computer points. |
| 107 | Supplying and fixing of LAN point socket outlet (RJ-45)modular type ISI marked on the modular board / cover including connections etc as requird. as required. as per direction of Engineer in Charge. |
| 108 | Supplying and fixing of metal box (nominal size) on surface or in recess with suitable size of modular base and cover plate in front including providing and fixing 15 / 16 amps socket outlet and 15 / 16 amps modular type switch, connection, etc as required. as per direction of Engineer in Charge. |
| 109 | Recessed wiring to submain in 2x2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired including all accessories and connection as per direction of Engineer in Charge. |
| 110 | Recessed wiring to submain in 4 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired including all accessories and connection as per direction of Engineer in Charge. |
| 111 | Recessed wiring to submain in 4 x4sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired including all accessories and connection as per direction of Engineer in Charge. |
| 112 | Supplying and drawing of CAT-6 cable for LAN connectivitty with FR PVC sheath in separate surface / recessedPVC conduit as required including all accessories and connection as per direction of Engineer in Charge. |
| 113 | Supply and fixing of125Amp Indoor type Power Distribution Board in MS sheet of 16SWGwith incomming-125Amp,4P,18KA 415V MCCB,125Amp, 4 pole Onload Tap changer., Type 1+2 SPD of maximum Discharge Current (3Ph+N) ,63Amp, 4 pole HRC fuse base with fuseOutgoing-(i) 63Amp,4P,18 KA 415V MCCB-3 Nos,32Amp,4P,18 KA 415V MCCB-4 Nos,25Amp,2P,65 KA 240V MCCB-2 Nos with Multifunction meter CL-1.0 (I,V,KW,KVA, KWH, KVAH),150/5A CT, C.L. 1.0, 15VA-3 Nos ,R-Y-B LED Indicating lamp 220/240V AC-3 Nos,6Amp SP MCB, 10KA, C-curve- 3 Nos,15X5mm Copper Bus-bar,Drum Insulator, 11KV ISI marked as required and as per the direction of EIC |
| 114 | Supply and fixing of8+24 wayTPN Double door MCB DBwith sheet steel enclosure IP-43 protected of ISI marked, on surface, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. with incomming-63A TPN MCB= 1 No., outgoing-(i) SP MCB 32A=18 No. C-Series,(ii)SP MCB 10A=6Nos C-Series with ISI marked as required and as per the direction of EIC . (Ground Floor Main BDB) |
| 115 | Supply and fixing of6+18 wayTPN Double door MCB DBwith sheet steel enclosure IP-43 protected of ISI marked, on surface, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. with incomming-32 A TPN MCB=1 No., outgoing-(i) SP MCB 32A=13 Nos C-Series,(ii)SP MCB 10A=5Nos C-Series with ISI marked as required and as per the direction of EIC . (First Floor Main BDB) |
| 116 | Supply and fixing of4 waySPN Double door MCB DBwith sheet steel enclosure IP-43 protected of ISI marked, on surface, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. with 63 A TPN MCB=1 No. C-Series with ISI marked as required and as per the direction of EIC . (For ground floor special equipment) |
| 117 | Supply and fixing of4 waySPN Double door MCB DBwith sheet steel enclosure IP-43 protected of ISI marked, on surface, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. with 32 A TPN MCB=1 No. C-Series with ISI marked as required and as per the direction of EIC . (For ground floor special equipment) |
| 118 | Supply and fixing of18Watt, 6000K round surface mounted LED panel light including all accessories ,materials as required as per the direction of EIC. |
| 119 | Supply and fixing of15Watt, 6000K round LED panel light including all accessories ,materials as required as per the direction of EIC. |
| 120 | Supply and fixing of18W LED batten type tube light including all accessories ,materials as required as per the direction of EIC. |
| 121 | Supply and fixing of 20Amp metal 3 pin plugs and sockets(P-N-E) with SP MCB including all accessories ,materials as required as per the direction of EIC. |
| 122 | Supplying and fixing of 1200 mm sweep BLDC fan without remote including all accessories and connection as per direction of Engineer in Charge. |
| 123 | Supplying and fixing of 400 mm sweep wall mountedfan including all accessories and connection as per direction of Engineer in Charge. |
| 124 | Supplying and fixing of 250 mm sweep plastic exhaustfan including all accessories and connection as per direction of Engineer in Charge. |
| 125 | Supplying and fixing of 450 mm sweep industrial heavy duty exhaustfan including all accessories and connection as per direction of Engineer in Charge. |
| 126 | Supplying,Installation,Testing & commissioning of 2.0 Ton, single phase,5 star rating Inverter Split AC with copper condensoron the existing wall and making duct on the same for connecting to outdoor unit and water drainage system with 5KVA, 90-300V autometic voltage stabilizer Placing the outdoor unit outside the wall with non rusting bracket to be fixed on the outer wall etc. as required and as per direction of EIC. |
| 127 | Supplying,Installation,Testing & commissioning of 1.5Ton, single phase,5 star rating Inverter Split AC with copper condensoron the existing wall and making duct on the same for connecting to outdoor unit and water drainage system with 4KVA, 90-300V autometic voltage stabilizer Placing the outdoor unit outside the wall with non rusting bracket to be fixed on the outer wall etc. as required and as per direction of EIC. |
| 128 | Supplying,Installation,Testing & commissioning of 20 KVA, 3-Ph input, 1-Ph output pure sine wave, 30 minutes back-up online UPS with transformeretc. as required and as per direction of EIC. |
| 129 | Supply and fixing of 50W LED flood light including all accessories ,materials as required as per the direction of EIC. |
| 130 | Supply and fixing of100W, 240V modular electronic ceiling fan regulator including all accessories as per the direction of EIC . |
| 131 | Supply and fixing of240V call bellincluding all accessories as per the direction of EIC . |
| 132 | Supply & Laying of 50Sq mm 3.5 core Armoured Aluminum cable as required including all accessories and connection as per direction of Engineer in Charge. |
| 133 | Supply and fixing of 9.2mm dia 915mm long copper lightning arrester including all accessories, labour cost, T&P etc complete work as per Direction of EIC. |
| 134 | Supply and fixing of chemical Earthing of with 3mtr long40mm dia chemical filled comound and GI earth electrodeincluding excavation of earth pit with highly conductive back filled chemical compund of 2 x25kg , brick work in cement mortar masonary workwith removable cover for Earth pit chamber ofsuitable size including all accessories, labour cost, T&P etc complete work as per Direction of EIC. |
| 135 | Supply & Laying of25X3mm size hot dip GI Earthing strip @ 0.6Kg/Mtr. including all accessories and connection as per direction of Engineer in Charge. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
