Public Works Department-PWD has published Repair Work At E-Sr-Iia (Punjabi Bagh) Near Surajmal Metro Station, Nangloi, New Rohtak Road, Delhi-41(Sh:- Termite Treatment Of Rooms, Providing Elevated Platform For Pvc Water Tank, Repair Of Flooring And False Ceiling At Some Corners, P/F New Locks In . Submission Date for this Tender is 19-01-2023. Bolts Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | All kinds of soil. |
| 3 | Supplying chemical emulsion in sealed containers including delivery as specified. |
| 4 | Chlorpyriphos/ Lindane emulsifiable concentrate of 20% |
| 5 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole : |
| 6 | With Chlorpyriphos/Lindane E.C. 20% with 1% concentration |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 8 | 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) |
| 9 | 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 10 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
| 11 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 13 | Foundations, footings, bases of columns, etc. for mass concrete |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 15 | Thermo-Mechanically Treated bars |
| 16 | Brick work withcommon burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 17 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 18 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : |
| 19 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 20 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 21 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 22 | 300x16 mm |
| 23 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 24 | 250x10 mm |
| 25 | 100x10 mm |
| 26 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 27 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 28 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. |
| 29 | 80x1.25 mm M.S. laths with 1.25 mm thick top cover |
| 30 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : |
| 31 | 25 mm thick |
| 32 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Minimum size of tiles not less than 450 x 300 mm |
| 33 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. |
| 34 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. |
| 35 | Size of Tile 600x600 mm |
| 36 | Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. |
| 37 | GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. |
| 38 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 39 | Two or more coats on new work |
| 40 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : |
| 41 | Old work (one or more coats) |
| 42 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 43 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 44 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 45 | Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer- in-charge. (Old CC paver blocks shall be supplied by the department free of cost). |
| 46 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
| 47 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 48 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : |
| 49 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
| 50 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tubeupto 1 metre long with S.S. triangular plate to Eureopeantype W.C. of quality and make as approved by Engineer - in -charge. |
| 51 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe |
| 52 | 32 mm dia |
| 53 | Providing and fixing soil, waste and vent pipes : 100 mm dia |
| 54 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 55 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. |
| 56 | Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. |
| 57 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall |
| 58 | 25 mm nominal outer dia Pipes |
| 59 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. |
| 60 | 25 mm dia nominal bore |
| 61 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 62 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 63 | 15 mm nominal bore |
| 64 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 65 | 15 mm nominal bore |
| 66 | Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. |
| 67 | 15 mm nominal bore |
| 68 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 69 | With float glass panes of 4.0 mm thickness |
| 70 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 16 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 71 | Granite work gang saw cut (polished and machine cut) of thickness 16 mm for wall lining (venner work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to thebacking by means of cramps, which shall be paid separately).Granite of any colour and shade. Area of slab over 0.50 sqm. |
| 72 | Providing and laying tactile tile such as directional, warning or hazardous (For vision impaired persons as per standards) of size 300X300X15 mm {10 mm base + (5 mm ± 0.5 mm) thick raised portion} having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours (preferably yellow) and shades for indoor floors such as court yard, indoor floor, multi modals locations etc. laid on 20 mm thick base of cement mortar 1:4 (1 cement: 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. as perthe harmonised guidelines & space standards for barrier free built environment for persons with disability and elderly persons issued by Ministry of Urban Development, Govt. of India completeas per the direction of Engineer-in-Charge. |
| 73 | Providing and laying cement concrete (M-30 grade) tactile tile such as directional, warning or hazardous (for vision impaired persons as per standards) of size 300x300x60 mm (60 mm base+ (5 mm +/- 0.5 mm) thick raised portion) having water absorption 6% and conforming to IS: 13801, of approved make in all colours (preferably yellow) and shades for footpath laid on 20 mm thick base of cement mortar 1:4 (1cement:4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. (The thickness of wearing layer should not be less than 8 mm) and as per harmonized guidelines and space standards for barrier free built environments for persons with disability and elderly persons issued by ministry of Urban Development, Govt. of India complete as per direction of Engineer-in-charge. |
| 74 | Add Cost Index @ 34.95% on DSR Items i.e.Rs.1757974 |
| 75 | Less @ 9.5% on DSR Items i.e.Rs.2372386 |
| 76 | Providing and fixing building entrance signage/tactile layout/ emergency evacuation layout on the wall or with any other required structure, with provision of multilingual text integral with 4 mm thick blue acrylic base plate with min 0.5 mm aluminum sheet at the back with upper case san serif words made of white acrylic non glare cut out letters of height 15 mm , raised above base plate by not less than 0.8 mm and the equivalent words written in Hindi/any language as required with same specifications with grade 1 Braille to be integral with the sign face and should be raised 0.5 mm above acrylic base plate. Each signboard to be fixed strictly as per the harmonized guidelines & space standards for barrier free built environment for persons with disability, issued by MOUD, Govt. of India, and as per approved drawings and complete as per the directions of Engineer-in-charge. (Note:-i) Payment for structure, if required, shall be paid separately.) ii) Size of the signboards shall be proportional to the layout plan of the particular building, min size of the above signboards shall not be less than 1200 mm x 750 mm. |
| 77 | Providing and fixing signage on the wall or with any other required structure, with provision of multilingual text integral with 4 mm thick blue acrylic base plate with min 0.5 mm aluminum sheet at the back with upper case san serif words made of white acrylic non glare cut out letters of height 15 mm, raised above base plate by not less than 0.8 mm and the equivalent words written in Hindi/ any language as required with some specifications with grade 1 Braille to be integral with the sign face and should be raised 0.5 mm above acrylic base plate. Each signboards for barrier free built environment for persons with disability, issued by MOUD, Govt. of India, and as per approved drawings and complete as per the directions of Engineer-in-charge.Note:-i) Payment for structure, if required, shall be paid separately.)ii) The above nomenclatureshall be applicable for all types of signage like.a) Identification signage (For Eg Room Names/toilet facility/drinking water/ staircase/ Entry/Exit/Lift etc.) of the size 150 mm x 230 mm or 200 x 200 mm).b) Floor directions (signboard placed near the Lift/Staircase/Entry to the particular floor indicating the facilities on that floor. These are normally also called as directional signage.). Min size of these boards shall not be less that 450 mm x 450 mm).c) Emergency exit sign boards (Generally used text as "in case of emergency, Do not use the lift". "Emergency Exit" etc.) |
| 78 | Cutting of marble / kota stone /precast terrazo tile flooring by hand cutter in required shape i/c cleaning bed by removing cement mortar and disposal of malba for all leads and lift with in dumping ground as per direction of engineer-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
