Rural Development And Panchayats Department has published Tender For Construction Of 2 Works In Vadavambalam Panchayat. Submission Date for this Tender is 25-01-2023. Building Work Tenders in Villupuram Tamil Nadu. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Construction of DrainageVadavambalam Panachayat |
2 | Earth work excavation for foundation in all classes of soils except hard rock requiring blastingwith initial lead and lift etc including levelling the site etc. complete with standard specification in hard stiff cllay, black cotton soil, hard fred earth |
3 | Cement Concrete 1:4:8 Using 40mm ISS size Hand Broken granite stone jellyincluding labour charges for mixing concrete watering and laying the concrete in layers not more the 15 cm thick compacting etc complete complying with standard specification etc c |
4 | Supplying and erecting shuttering including complying with standard speficiation including all labour charges etc.complete. |
5 | Cement concrete 1:3 : 6 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc completefor 10 cum. |
6 | Plastering in Cement Mortor 1 : 3 mix to 20 mm thickincluding cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete |
7 | Provision for filter media & RCC rings |
8 | Providing for Name board |
9 | Providing for Photographs |
10 | Construction ofAnganwadi Building @ VadavambalamPanchayat |
11 | Earth work excavation for foundation in all classes of soils and sub soil to full depthexcept in hard rock requiring blasting but inclusive of shoring struttingif required forthe sides of foundation. |
12 | Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete |
13 | ReFilling in Basement with Excavated Earth in Layers of not more than 15 cm thick , well watered,rammed and consolidated complying with standard specification etc complete . |
14 | supplying and fillin gin Basement with filling san in layers not more than 15 cm thick. Well and conslolidated complying with standard specification |
15 | Supplying and Filling inBasement withConveyed Gravel in layers not more than 15 cm thick , well ramed and consolidated complying with standard specification |
16 | Supplying and Erection centering for sides and soffiots including necessaary supports and strutting as directed by the departmental officers Lintels, Staircase waist slabs, Landing slabs, Landing beam, Portico beam etc.) |
17 | Brick work for Super Structure |
18 | Sundhade platform |
19 | for Lintel Beam and slab |
20 | Supplying and fabrication of steel including cost and conveyance of bending to shape and tying in position and forming grills for all R.C.C works including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing |
21 | Reinforced cement concrete in 1 : 1.5 : 3 , mix using 20mm iss HBG stone jelly for all reinforced cement concrete works excluding cost of centering and stellbut including laying,vibrating,curing and finishing ,fixing fan clamps in the RCC floor and roof slab works wherevver necessery and bearing surface of the wall at the sides and bottom of the slab, beam shall be finished smooth with cement mortor 1:3 and craft paper without claiming extra cost.,complete compying with standard specification and as directed by the departmental officers |
22 | Brick Work in Cement Mortor 1 : 5 mix using Country Bricks of size 22 x 11 x 7 cm including cost and conveyance of all materials and labour charges etc complete . |
23 | Weathering Course with Brick Jelly Lime Concrete using 20 mm brickjelly with Lime of 32 : 12.5 ratio including cost conveyance of all materials and labour charges etc complete |
24 | Finishing the Top of Roof with one course of Pressed Tiles of size 23 cm x 23 cm x 2 cm laid incement mortor 1 : 3 mix and Pointingwith the same mortor mixed with water proof compoundincluding cost conveyance of all materials and labour charges etc complete |
25 | Plastering with Cement Mortor 1:5,12mm thick including cost and conveyance of all materials and labour charges including curing etc., complete complying with standard specificationas directed by the departmental officers |
26 | Cement concrete 1:2:4 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc completefor 10 cum. |
27 | Plastering with Cement Mortor 1:3, 20mm thick including cost and conveyance of all materials and labour charges including curing etc., complete complying with standard specificationas directed by the departmental officers |
28 | Plastering with Cement Mortor 1:3, 10mm thick including cost and conveyance of all materials and labour charges including curing etc., complete complying with standard specificationas directed by the departmental officers |
29 | Paving the Wall andFloor with Best Quality Stain Free Nano PolishVetrifiedTiles of size 60 cm x 60 cm x 8 mm any approved colour and sizeshape and quality laid in Cement mortor 1 : 3 to 20 mm thick in all floors and the Top Pointed with the white cement 0.40 kg mixed with the same colouring Pigments etc complete |
30 | Paving the Wall and Floor with Anti Skid Tiles of any Colour and any size laid in CM 1 :2 , 20 MM Thick andPointing with White Cement 0.40 Kgper sqm mixed with colouring pigment to match the colour of the tiles including finishing the joints neatly complying with the standard specification and as directed by the departmental officers . |
31 | Dadooing walls with colour designed Glazed Tiles of sizes 300 mm x 200 mm x 6 mm size of approved make and quality and colour set in cement mortor 1 : 2 ( one cement and two sand ) over 10 mm base layer plastering and pointing with white cement neatly as directed . |
32 | Fabrication and Supply and delivery of Mild Steel Doors of the following sizes with single leaf outer frame made of 35X35X5 mm equal M.S L angle and shutter frame made of 25X25X5mm equal M.S.L angle for horizontal and vertical members and the shutter frame strengthenened by stiffeners of 2 nos Horizontal and 3 nos diagonal using MS flat of Size 20x5 mmfully covered with 18 guage plain M.S full sheet welded with shutter frame neatly and also fixing by welding 6 nos of holdfasts made of 35x35x5mm equal M.S.L angle,1 No of wind appliance,2 Nos of tower bolts,1 No of aldrop,2 Nos of handles,fixing the shutter with 6 Nos of 6 inch hinges with outer frame of the door inculding painting the whole unit with one coat of best quality of red oxide primerof size 1.10 x 2.10 m |
33 | Fabrication and Supply and delivery of Mild Steel Doors of the following sizes with single leaf outer frame made of 35X35X5 mm equal M.S L angle and shutter frame made of 25X25X5mm equal M.S.L angle for horizontal and vertical members and the shutter frame strengthenened by stiffeners of 2 nos Horizontal and 3 nos diagonal using MS flat of Size 20x5 mmfully covered with 18 guage plain M.S full sheet welded with shutter frame neatly and also fixing by welding 6 nos of holdfasts made of 35x35x5mm equal M.S.L angle,1 No of wind appliance,2 Nos of tower bolts,1 No of aldrop,2 Nos of handles,fixing the shutter with 6 Nos of 6 inch hinges with outer frame of the door inculding painting the whole unit with one coat of best quality of red oxide primer ofs size 1.00 m x 2.10 m |
34 | Fabrication and Supply and delivery of Mild Steel Doors of the following sizes with single leaf outer frame made of 35X35X5 mm equal M.S L angle and shutter frame made of 25X25X5mm equal M.S.L angle for horizontal and vertical members and the shutter frame strengthenened by stiffeners of 2 nos Horizontal and 3 nos diagonal using MS flat of Size 20x5 mmfully covered with 18 guage plain M.S full sheet welded with shutter frame neatly and also fixing by welding 6 nos of holdfasts made of 35x35x5mm equal M.S.L angle,1 No of wind appliance,2 Nos of tower bolts,1 No of aldrop,2 Nos of handles,fixing the shutter with 6 Nos of 6 inch hinges with outer frame of the door inculding painting the whole unit with one coat of best quality of red oxide primer of size 0.75 m x 2.10 m |
35 | Fabrication and Supply and delivery of Mild Steel Window of the following sizes with Double leaf outer frame made of 35X35X5 mm equal M.S L angle mullion section made of 25X25X5mm equal T section ,shutter frame made of 25X25X5mm equal M.S.L angle for horizontal and vertical members and the shutter frame strengthenened by stiffeners of 2 nos Horizontalfor each each shutter using 25X25X5mm equal M.S T section fully covered with 18 gauge Plain M.S full sheet welded with shutter frame neatly andalso fixing by welding protective grill with 12mm square M.S rods at an interval of not greater of not greater than 10cm centre to centre to the outer frame , 6Nos of Hold fasts made of35x35x5 mm equal M.S.L angle,3Nos of Peg Stays with Holes for keeping the window open in different positions , 3Nos of locking handles ,fixing the shutter with 6 Nos of 4inch hinges with outer frame of the windowinculding painting the whole unit with one coat of best quality of red oxide primer of size 1.20 X 1.30 m |
36 | Fabrication and Supplyof "N" Type Mild Steel Glazed Ventilators (in two parts) of the following size with outer frame made of 25X25X5 mm equal M.S.L angle with intermediate rails using25X25X5 mm M.S T section for panels with 3mm thick pin headed glass with teak wood beading and glass putty and also fixing by weldingprotective grill with 12mm square M.S rods at an interval of not greater than 10cm centre to centre to the outer frame ,4 Nos of hold fasts connecting the 2 parts at 75 mm clear and with 45 degree inclination with25x25x5mm 10G weld mesh and wire mesh including painting the whole unit with one coat of best quality of redoxide primer of .Size 0.60X 0.45 m |
37 | Supply of RCC JOLLY of size 0.90 m x 0.45 m etc complete |
38 | Supply and Fixing of RCC JOLLY of size 0.60 m x 1.30 m including cost and labour charges etc complete |
39 | Fixing charges for Steel Door in position etc complete |
40 | Fixing charges for Steel Window in position etc complete |
41 | Fixing charges for Jolly in position etc complete |
42 | Providing Gronolothick Floor Finishin Plain Cement Concrete 1 : 2 : 4 (one cement, two sand and four aggregate ) using 10 to 12 mm gauge Hard broken stone jelly including laying , finishing and the Top rubbed smooth with trawel thread lining ,curing etc , complete |
43 | Distembering Two Coats with best approved Oil Bound Distember including cost of Painting with Primer Coatover new plastered surface and conveyance of all materils to site and all labour charges etc complete |
44 | Painting Two Coats with approved Exterior Emulsion over one coat of Primer Coat over plastered wall surface, ceiling and other new surface including cleaning , preparing the surface,curing,scaffolding charges etc, complete. |
45 | Painting Two Coats over Iron work including cost of paint and Labour charges etc complete |
46 | Providing and fixing PVC. RainWater Downfall pipes of size 110 mm diametre with necessary shoes,bends and other specials, clamps,screws,nailsteakwood plugs etc complete including cost of all materials. The rate include cost of removable cast iron Gratings of appropriate size.The size of Teak wood plugs to be used is 150 mm x 25 mm in front and 200 mm x 75 mm in rear and all other sides with a depth of 100 mm . The pipe is to be fixed by means of U clamps at the centre of the pipe to be fixed in addition to these for more than three metres pipie length , complete complying with standard specification |
47 | Suppling and fixing in position of Baby FreindlyIndian Water Closet , white Glazed earthen ware of approved quality with P trap or S trap confirming to is:2556 - Part XII with sand cushion and forming the closet using 40mm broken jelly lime concreteetc complete |
48 | Supplying and Fixing in position of Coloured Glazed EuropeyenWater Closet of best quality and approved make with 100 mm " P " or " S " trap connecting with CI 100 mm dia / PVC pipe of 110 mm dia , double flapped rigid PVC back seat and seat cover with CP Brass hinges including cost of white cement , cement for packing , spun yarn , teak wood plugs, brass screws ,etc ,including supplying and fixing 10 litres capacity PVC / 12.5 Litres capacity porcelin low level flushing tank with a pair of CI brackets , etc., complete with all fittings such as 15 mm brass ball valve with polythene . |
49 | Manufacturing, Supplying and Fixing of Stainless Steel Hand Rails for Staircase Steel Hand Rail for Steps ,Ramp using 50 mm dia 304 L Grade Stainless Steel Pipe of 1.60 mm thick will be provided with Tubular supports made of 304 L Grade Stainless Pipe of 25 mm Dia of 1.60 mm thick welded to the railing . The supports will be grouted into the wall and provided with 93.00 mm thick Stainless Steel circular base plate of 304 L Grade .The rate shall included for groutting into concrete with necessasry supporting arrangements the hand rail in Floor Polishing Buffing , Bonding ,Cutting , grinding, conveyance, welding charges, electrical charges etc , complete |
50 | Provision of PVC Tank 500 litres |
51 | Provision for Waterline Connection |
52 | Provision for Lock and Key |
53 | Provision for Rain Water Harvesting Structures |
54 | Provision for photographic charges |
55 | Electrification Arrangements |
56 | Wiring with 2X2.50 sq.m PVC unshenthed SC alu. Cable with 650V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.Wswitch box with pointing of suitable colour with continuous earth wire connectionof 14 SWG TC wire for concealed PVC light point (SD 21) |
57 | Providing Fan Point with accessories etc. completeWiring with 2X2.5 sq.m PVC unshenthed SC alu. Cable with 650 V gradein suitable PVC rigid pipe on wall and ceiling with PVC accessories andwith suitable T.W box to have the ceiling switch and regular with paintingsuitable colour with continuous earth wire connection of 14 SWG TC wireof 14 SWG TC wire for concealed PVC light point (SD 21) |
58 | Supply & fixing of 1200mm (48) sweep AC ceiling fan complete with regulator with 300mm down rod on the existing clamp. (SD 110) |
59 | Supply and fixing of WT bulk head fitting with guard suitable for incandescesregulator with 300mm down rod on the existing clamp. (SD 110) |
60 | Wiring with 2X2.5 sq.m PVC unshenthed SC alu. Cable of 650 V grade in suitablePVC rigid pipe on wall and ceiling with PVC accessories of 150x 100x 63m sizeT.W switch for 15A pin non interlocking plug including pin top with paintinguitable colour with continuous earth wire connection of 14 SWG TC wire forconcealed PVC Plug point (SD 37) |
61 | Supply and fixing of 32 Amps DP Switch of 500V with metal clad with fuse andneutral (Side Handle) on suitable (SD143) |
62 | Supply & run of 2X2.50 sq.m PVC unshenthed SC alu. Cable of 650 V gradeinsuitable driller on wall &ceiling with continuous earth wire connection of |
63 | Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link(1" x 1/8" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an eitherside with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulatedcopper wire from |
64 | EB Service connection charges |
65 | Provision for Name Board etc., |
66 | Painting Cartoons in Hall and Toilet and Outer Lettering, Drawing Pictures |
67 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package} |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail