Public Works Department-PWD has published Tender For Proposed Construction Of Single Storied 10(Ten) Bedded Primary Health Centre (Phc) Building Including Kitchen,Morgue,Garage And Generator With Driver Room Building At Existing Katlamara Phc Under Mohanpur Sub-Division, West Tripura During. Submission Date for this Tender is 20-01-2023. Building Work Tenders in mohanpur Tripura. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Construction of Embankment with Material Obtained from Borrow Pits Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per MoRD Technical Specification Clause 301.5. |
| 2 | Flat Brick soling Providing and laying flat brick soling layer on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 kN as per MoRD Technical Specification Clause 412. |
| 3 | Brick edging laid length wise Providing and laying brick edging laid lengthwise on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 kN as per MoRD Technical Specification Clause 412. |
| 4 | Excavation for structure:(A) Without Dewatering Excavation for structures as per drawing& MORDtechnical specification clause-305.1including setting out construction of shoring and bracing removal of stumps and other deleterious materials and disposal up to a lead of 50m dresssing of sides and bottomand back filling in trenches with excavated suitable materials.(A) Without Dewatering, I) Ordinary soil. Upto 3m depth |
| 5 | Filling in foundation trenches as per drawing and MORD technical specification clause 305.3.9,1200. 1. Sand filling. |
| 6 | Providing concrete for plain concrete (using Jhama brick aggregate) in open foundations complete in/c form work as per drawing and MORD Technical Specifications clause 802, 803,900, 1202 & 1203 ( including centering, shuttering, stagging etc. but excluding reinforcement) 1. PCC Grade M-10 (Using Jhama brick aggregate)(i) Nominal Mix. |
| 7 | Brick Masonry work in cement mortar in foundation complete excluding pointing and plastering as per drawing and MORD technical specification clause 600 , 1202 , and 1203.(II) In 1:4 cement mortar. |
| 8 | plastering withcement mortor (1:4) 12 mm thick on brick work /c.c work includinga finishing coat of net cement punningwith 2.75 kg of cement per sqm in sub-structure as per MORD technical specification clauses 613.4 and 1204 |
| 9 | Drillingand boring pilot hole in any soil strata by manual means,collection of soil samples of different strata met with during drilling at various suitable levels,preservation of samples in polythene bags /sample boxex and disposal of excess soil or mud,including the cost for water etc as required to maintain the pilot hole properly as per specification and direction of the Engg-in-charge (i) 100mm dia |
| 10 | Reaming of pilot hole to an enlarged bore hole in any soil strata by manual means disposal of excess soil or mud in/c the cost for water etc as required to maintain the bore hole properly as per specification and direction of the engg-in-charge (i) from 100 mm dia hole to 250 mm bore hole |
| 11 | Providing and fixing of UPVC end cap/well cap suitable for UPVC "CM" casing or"CS" casing or "RS" pipes as per specification and direction of the Engg-in-charge |
| 12 | Providingand lowering UPVC pipe as per IS:12818 after washing of the bore hole by manual means as per specification and direction of the Engg-in-charge(A)CM casing pipe(i) 100 mm dia |
| 13 | (ii) 150 mm dia |
| 14 | (B) RS pipe (100 mm dia) |
| 15 | Providing and fixing of UPVC reducer suitable for UPVC "CM" casing or "CS" casing or "RS" pipe as per specification and direction of the Engg-in-charge 150 x 100 mm dia |
| 16 | Providing and sHrouding of deep tube well assembly with washed pea gravels (2.0 mm -4.75 mmeffective size) as per specification and direction of the Engg-in-charge (i)Pea gravels obtained from Durgapur, West Bengal |
| 17 | Providing and fixing of housing clamp (made with 10mm thick MS sheet) with necessary arrangement forSBDTW as per specification and direction of the Engg-in-charge (i)125mm dia |
| 18 | Providing and fitting fixing G.I pipe(mediumclass) conforming to IS:1239 for column pipe assembly for installation of submessible pump motor as per direction of Engg-in-charge (i) 40mm nominal bore |
| 19 | Supplying and installation of water lubricated submerssible pump of Duke/Cromptongreaves/Kirloskar/CRI make having capacity 1500 GPH at total head of 45 mtr coupled with submrssible motor 2 HP suitable for 240 volts(+ 10%) verification single phase 50 HP. AC supply DOL starting method to run at 2880rpm along with 35 mtr 2.50 sqm, PVC and 40 mm dia G.I pipe upto required depthetccomplete as per direction of Engg-in-charge (Required 40mm dia G.I pipe will supplied by department at free of cost or paid seperately) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
