Road And Building Department-RBD has published Tender For Repair And Renovation (Civil, P.H. E.I.) To Guest House Of Ouat Chiplima, Sambalpur With 1 Suit And 1 No Of Double Bedded Room In Ground Floor And Same In First Floor. (Construction Of Guest House). Submission Date for this Tender is 16-01-2023. Building Work Tenders in burla Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | CIVIL WORKS Earth work in excavation of foundation in hard soil including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3M in depth and as per the direction of Engineer-in-charge. |
| 2 | Supplying, filling in foundation and plinth with sand in 22.5 cm (9”) thick layers including watering and ramming with cost, conveyance, royaltiesof sand with labour and T&P required for the work etc. complete (Measurement will be taken on finished compacted section only). |
| 3 | Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard hand broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge. |
| 4 | Fly Ash brick masonry in cement mortar (1:6) in Foundation and plinth using fly ash bricks of23cm x 11cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work complete in all respect. |
| 5 | R.C.C. work of Grade-M20 in following works using20mm size & down graded hard black crusher broken granite stone chips of approved quality from approved quarry in specified proportion including hoisting, lowering, laying and compacting concrete, watering and curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour and T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position. |
| 6 | (Column Base & Footing) |
| 7 | (Plinth Band) |
| 8 | (Lintel) |
| 9 | Ground Floor |
| 10 | First Floor |
| 11 | Second Floor |
| 12 | (Chajja) |
| 13 | Ground Floor |
| 14 | First Floor |
| 15 | Second Floor |
| 16 | (Column/Beam) |
| 17 | Ground Floor |
| 18 | First Floor |
| 19 | Second Floor |
| 20 | (Stair Case) |
| 21 | Ground Floor |
| 22 | First Floor |
| 23 | (Roof Slab) |
| 24 | Ground Floor |
| 25 | First Floor |
| 26 | Second Floor |
| 27 | Straightening bent up or coiled M.S. rod or HYSD steel(Fe-415/Fe500),Cutting,bending,cranking, hooking, welding or jointing (if required), the M.S rod or HYSD steel and binding, tying the grills, hoisting, lowering and placing in proper position as per drawing & design required for R.C.C works including cost , conveyance and taxes of M.S. rod or HYSD steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc. complete in all floors ( weight of binding wires will not be considered for payment and payment will be made on weight of M.S. rod or HYSD steel only. Steel bars of only manufacturing companies such as S.A.I.L of Fe-415 / Fe-500 grade are to be used in the work & if required original bill of S.A.I.L steel has to be produced by the contractor) |
| 28 | Ground Floor |
| 29 | First Floor |
| 30 | Second Floor |
| 31 | Fly Ash brick masonry in cement mortar (1:6) in superstructure using fly ash bricks of25cm x 12cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work complete in all respect in all floors. |
| 32 | Ground Floor |
| 33 | First Floor |
| 34 | Second Floor |
| 35 | 16mm (5/8”) thick cement plaster (1:6) finished smooth to inside roughsurface of9”/10” thick brick walls after raking out the joints including watering and curing with cost with cost, conveyance, royaltiesof all materials with all labour, T&P required for the work etc. complete. |
| 36 | Ground Floor |
| 37 | First Floor |
| 38 | Second Floor |
| 39 | 12mm (½”) thick cement plaster (1:6) finished smooth to outside smooth surface of brick walls after raking out the joint including watering and curing with cost, conveyance, royaltiesof all materials with all labour and T&P required for the work etc. complete in all respect. |
| 40 | Ground Floor |
| 41 | First Floor |
| 42 | Second Floor |
| 43 | Supplying, fitting and fixing vitrified tile in floors of size 600mm x 600mm coloured / printed series of approved make of premium grade having thickness 8mm to 10mm conforming to IS-4457 on 20mm thick bed of cement mortar (1:4) & filling jointed with white cement of approved qualityincluding rubbing and polishing etc. complete with cost, conveyance, royalties - of all materials complete in all respects. |
| 44 | Ground Floor |
| 45 | First Floor |
| 46 | Supplying, fitting and fixing chequiredtiles of approved dimension as directed by Engineer-in-charge in floors, treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties - of all materials complete in all respects. |
| 47 | Fixing marble tiles of approved dimension 16mm to 25mm thick as directed by Engineer-in-charge in floors, treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties - of all materials complete in all respects. |
| 48 | Ground Floor |
| 49 | First Floor |
| 50 | Fixing marble tiles of approveddimension 16mm to 25mm thick as directed by Engineer-in-charge in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties - of all materials complete in all respects. |
| 51 | Ground Floor |
| 52 | First Floor |
| 53 | Supplying, fitting and fixingM.S. iron grill of approved design and section as directed by Engineer-in-charge and placing in proper position including cost, conveyance, taxes with all labour and T&P required for the work etc. complete in all respect. |
| 54 | Ground Floor |
| 55 | First Floor |
| 56 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @0.90mtr. C/C and stainless square pipe barracking of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 57 | Ground Floor |
| 58 | First Floor |
| 59 | Supplying, fitting, fixing of window (sliding type) made of aluminum section Section 9778 as window frame,section no.4095,4096 and 9777,3994as shutter frame with wire mesh as panel fitted with rubber bending including locking arrangement including all fitting including cost of materials all taxes, labour, T&P etc. complete as per direction of Engineer-in-charge. |
| 60 | Supplying, fitting and fixing in position well dressed and well seasoned sal wood work framed and fixed (wrought and put up) in choukaths for doors, windows and ventilators including cost of iron works and coaltaring 2 coats to the wall side faces of choukaths including cost of coal tar, cutting grooves and mending sizes where necessary with cost and conveyance, royalties - of all materials and labour with T&P required for the work etc. complete in all respect in all floors. |
| 61 | Ground Floor |
| 62 | First Floor |
| 63 | Supplying, fitting and fixing Factory made 30mm thick B.W.P. I.S.I. marked flush door / window of Century/ Mayur make or similar type with seven years guarantee against termite and borer complete with aluminium fittings & wooden hinged cleats etc. including cost, conveyance - of all materials complete in all respect. (Guarantee papers of the company should be submitted to the Assistant Engineer before fitting of shutters) |
| 64 | Ground Floor |
| 65 | First Floor |
| 66 | Fixing glazed wall tiles (Johnsons, Bell, Kajaria or similar quality) of approved dimension as directed by Engineer-in-charge in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties - of all materials complete in all respects. |
| 67 | Ground Floor |
| 68 | First Floor |
| 69 | Finishing wall surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffodling staging charges with cost of all materials, labour, T&P etc. complete. |
| 70 | Ground Floor |
| 71 | First Floor |
| 72 | Second Floor |
| 73 | Painting two coats with plastic emulsion paint over a coat of water bond cement primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including cost, conveyance of all materials, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge. |
| 74 | Ground Floor |
| 75 | First Floor |
| 76 | Second Floor |
| 77 | Painting two coats with any approved weather seal coat (I.S.I.) paint of approved quality shade and make over a coat of priming with water bound wall cement primer (I.S.I.) to wall surface including acrylic putty with cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect. |
| 78 | Ground Floor |
| 79 | First Floor |
| 80 | Second Floor |
| 81 | Painting two coats with any approved synthetic enamel paint of approved quality shade and make over a coat of priming to new wood work / iron work including cost of the primer and paint, sand papering polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect. |
| 82 | Ground Floor |
| 83 | First Floor |
| 84 | Second Floor |
| 85 | Providing fitting and fixing of false ceilling with Aluminium anodised T Section No. 3215 with 2"-0" center to center, L section No. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2"-0"x2"-0" with prelaminated particle board suspended from ceiling etc complete. |
| 86 | Ground Floor |
| 87 | First Floor |
| 88 | Providing, supplying, fitting and fixing C.R. sheet shutter of 18 gauge in the prefixed doors/windows frame using M.S.angle25mm x 25mm x 5mm for shutter frame, bracing of 25mmx6mm, M.S. flat including hoisting, placing in position & electric arc welding etc. complete including painting one coat withanti corrosive red-oxide primer cost of hard ware fittings complete in all respect 2nd Floor |
| 89 | E.I. WORKS Recessed wiring to light point /ceiling fan point / call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVCconduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size ,with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of Finolex / Havells / V-Guard) (Make of modular box,cover,switch) With 10Years Warenty |
| 90 | Group A |
| 91 | Group B |
| 92 | Group C |
| 93 | Recessed wiringfor 5 / 6 amp socket outlet with 2 x 2.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVCconduit with 6Amp, 250 V clip in type switch ISI markedmounted on G.I moular box with face plate & cover of suitable size ,with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on separate board as per direction of Engineer-in-charge.(Make of wire Finolex / V-Guard / Havels) |
| 94 | 1) on separate board. |
| 95 | 2) on existing board. |
| 96 | Recessed wiringfor 6 pin 16 amp socket outletwith 16Amp, 250 V clip in type switch ISI markedmounted on G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection (V Guard / Havells / Finolex) |
| 97 | Recessedwiring to submain in PVC conduit with the following size of copper wire.(V Guard / Havells / Finolex) |
| 98 | I) 2 × 1.5 sqmm+ 1 × 1.5 sqmm. |
| 99 | II) 2 × 2.5 sqmm+ 1 × 1.5 sqmm. |
| 100 | III) 2 x 4 sqmm + 1 × 1.5 sqmm |
| 101 | IV) 2 x 6 sqmm + 1 × 2.5 sqmm |
| 102 | VII) 4 x 10 sqmm + 2 × 4 sqmm |
| 103 | S/F of bell push type call bell (Cona / Anchor) |
| 104 | Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required with 50 mm GI pipe of 10 feet |
| 105 | S/F of 25 mm x 5 mm size G.I. flat |
| 106 | S/F of 25 mm x 5 mm size Copper flat |
| 107 | S/F of 8 way TPN DB with 63 amp TPN MCB-1 no , 6-32 amp DP MCB -6 nos , 6-32 amp SP MCB- 16 nos (Legrand / Schnider / Hagger) |
| 108 | S/F of Wall mounted Fan 400/450 mm (Make USHA / Havels). |
| 109 | S/F of exhust fan 12"/16" heavy duty (Make USHA/ Khitan/ Havels). |
| 110 | S/F of 1 × 90 watt LED street light fitting complete with lamp (Crompton / Havells) |
| 111 | S/F of ceiling fan 1200mm (48inch) sweep (make-Usha Milenium Striker of White Colour) |
| 112 | S/F of modular type fan regulator(Step and socket type) (Anchor / Havells) |
| 113 | S/F of BK angle holder |
| 114 | S/F of 1 x 20 watt LED tube light (Crompton / Havells / Phillips/ Jaguar) |
| 115 | S/F of 9 watt LED bulb (Havells / Crompton) |
| 116 | S/F of 1 × 15 watt LED ceiling / surfacelight Fitting complete. (Crompton / Havells) |
| 117 | S/F of AC point with Industrial socket having 32 amp DP MCB (L&T / Legrand) |
| 118 | S/F of computer board of consisting of 3 nos 5 amp switch and socket with 1 no 15 amp switch and socket. |
| 119 | Supply , installation , testing and comissioning of panel board with 1) 200 amp 4 poleMCCB-1 no , 2) 400amp Cu Bus bar-1 no, 3) 200 amp change over-1 no, 4) 100 ampMCCB-2 nos 5) Digital Multi meter-1 set 6) RYB LED Indicating lamp with other required accessories and transportation charges. MCCB should mak: Legrand / and equivalent) |
| 120 | Supply , installation , testing and comissioning of panel board with 1) 100 amp 4 poleMCCB-1 no , 2) 200amp Cu Bus bar-1 no 3) Digital Multi meter-1 set 4) RYB LED Indicating lamp with other required accessories and transportation charges. MCCB should mak: Legrand / and equivalent) |
| 121 | Supply and laying of 95 mm2 3.5 core Allm Armd cable (Havells / Polycab) |
| 122 | P.H. WORKs Supplying all materials , labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS: 15778 and G.I pipe fittings of the following nominal bore with clamps including making good the wall,ceiling and floor ,testing all complete as per P.H. specification and direction of Engineer-in-charge |
| 123 | Ground Floor |
| 124 | 25mm dia PVC ASTM pipe (sch-80) |
| 125 | 32mm dia PVC ASTM pipe (sch-80) |
| 126 | First Floor |
| 127 | 25mm dia PVC ASTM pipe (sch-80) |
| 128 | 32mm dia PVC ASTM pipe (sch-80) |
| 129 | 40mm dia PVC ASTM pipe (sch-80) |
| 130 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge. |
| 131 | 15mm dia CP angle stop cock (Jaquar Make) |
| 132 | 15mm dia Two way bib cock (Jaquar make) |
| 133 | 15mm dia Long Body Bib Cock (Jaquar Make) |
| 134 | 20mm dia CP concealed stop cock (Jaquar Make) |
| 135 | 25mm dia brassfull way valve (Shakti make) |
| 136 | 32mm dia brassfull way valve (Shakti make) |
| 137 | 15mm dia CP Health Fucet (Jaquar Make) |
| 138 | 15mm CP Extension piece |
| 139 | 125mm CP grating |
| 140 | 15mm size C.P. flange |
| 141 | Wall Mixer |
| 142 | Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge |
| 143 | 2000 liters capacityPVC water storage tank |
| 144 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge. |
| 145 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proofas per P.H. specification and direction of Engineer-in-charge |
| 146 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. |
| 147 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge. |
| 148 | 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 149 | 110mm U-PVC‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 150 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 151 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 152 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 153 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 154 | 110mm U-PVC HR Bend(Ori Plast/Finolex/Supreme Make) |
| 155 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 156 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 157 | 110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make) |
| 158 | 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) |
| 159 | 110mm U-PVC Plain shoe bend(Ori Plast/Finolex/Supreme Make) |
| 160 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 161 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral "p" or "s" trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge |
| 162 | Single Piece Commod |
| 163 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered "Hot" and "Cold" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge |
| 164 | Counter Top Basin (560x455) (Perryware/Hindwire/Nycer Make) |
| 165 | Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink |
| 166 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 167 | 25mmx600mm long CP towel rail |
| 168 | Towel ring |
| 169 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. |
| 170 | 600mmx125mm plate glass shelf with CP/NP guard rails. |
| 171 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. |
| 172 | 600mmx450mm size B.E mirror (swivelled type) |
| 173 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 174 | CP soap holder |
| 175 | Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge. |
| 176 | ½” x 5” CP Shower (Plaza Deluxe Make) |
| 177 | Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 178 | Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 179 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber ofinside size 760mmx760mmx460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-charge |
| 180 | Inside size 76cmx76cmx46cm with 18” dia RCC MH cover |
| 181 | Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site. |
| 182 | Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 183 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 184 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed seriesto be pre-approved by the Engineer-in-charge ) |
| 185 | Kajaria Tile(Ground Floor) |
| 186 | Kajaria Tile(First Floor) |
| 187 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 188 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge ) |
| 189 | Kajaria Tile(Ground Floor) |
| 190 | 22"x7"x3+28"x7"+16"x4" |
| 191 | Kajaria Tile(First Floor) |
| 192 | Granite 10"x6" |
| 193 | Providing fitting, fixing of Aluminium door with anodized AL. door section of 9202 as vertical member,9201 as top and 9200 as middle bottom member with frame section No. 9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle No. 1855 Including all Cost of Labour. T&P hire charges of drilling machine. labour charges etc. complete. Ref : OBI10 |
| 194 | Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 120 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 120 liter"s along with 3 noa of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge |
| 195 | Aqua guard pure Chill 120 PSS UV |
| 196 | Ext. S/D Portion |
| 197 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture"s specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge |
| 198 | 100mm dia P.V.C. pipe |
| 199 | Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. |
| 200 | MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover ) |
| 201 | Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 202 | 30 USERS SEPTIC TANK |
| 203 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.1 x 4.70 x 3.30m x 0. 70 |
| 204 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in chargewith 1st extra lift of 1.50 m over initial laft. 1 x 4.70 x 2.30m x 0.15 = |
| 205 | Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC. |
| 206 | Supplying all materials, labor T&P providing CC (1:3:6) with 4 cm HG metal including watering curing lead of all materials to site etc. complete. |
| 207 | 1 x 4.70 x 2.30 x 0.15 = |
| 208 | Supplying all labor T&P &Providing C.C. (1:2:4)with 12mm size brokenhard granite chips including watering curing &lead of all materials to site etc. all complete. |
| 209 | ProvidingC.C. (1:1½:3) with 12mm size hard granite chips of RCC workincluding hoisting and laying and curing with leadof all materials to site. |
| 210 | Supplying all materials, T&P and providing MS reinforcement for RCC work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauges.1.013cum x 2,5 x 35.32 =89.44 say Rs- |
| 211 | Rigid & smooth centering & sheltering for RCC work including falls work & dismantling than after casting including cost of materials in ground floor. |
| 212 | Supplying all materials labour T&P and providing 1st class KB brick work in CM (1:3) in foundation and plinth including watering and curing and lead of materials to site. |
| 213 | Supplying all materials labour T&P and providing 12mm thick C.P (1:3) including watering curing and conveyance of all materials to site. |
| 214 | Supplying all materials labour T&P and providing cement punning including watering curing and conveyance of all materials to site.same as plastering |
| 215 | Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification. |
| 216 | Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge. |
| 217 | Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge. |
| 218 | Construction of 1nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories |
| 219 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only |
| 220 | Drilling of 200mm dia bore |
| 221 | 00 mtr to 30mtr |
| 222 | 30 mtr to 45mtr |
| 223 | Drilling of 150mm dia bore |
| 224 | 45 mtr to 213 |
| 225 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. |
| 226 | 200mm dia PVC pipe |
| 227 | 00 mtr to 45 mtrs |
| 228 | Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber "O" ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. |
| 229 | 200mm dia PVC (sch-80) pipe |
| 230 | Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department) |
| 231 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge |
| 232 | By DTH Rig |
| 233 | Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation: |
| 234 | Rocky terrain with boulder formation for 300m depth |
| 235 | Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) |
| 236 | 2 H.P. Single phase/ three phase 3 stagehead renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm |
| 237 | DOL Control panel |
| 238 | 40mm dia steel short piece |
| 239 | Well cap |
| 240 | 50mm size CI bracket |
| 241 | 2.50sqmm flat cable |
| 242 | Steel rope with cover |
| 243 | Labour charges for lowering including transportation |
| 244 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceilingand floor all complete as per specification and direction of the Engineer in charge |
| 245 | 32mm HDPE pipes (Finolex/Supreme make) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
