Construction Of Material Recovery Facilities ( Mrf ) At Mathanayakanpatti Compost Yard In Ward No. : 31- Earth Work Excavation For Foundation In Hard Stiff Clay, Stiff Black Cotton, Hard Red Earth, Shales Murram, Gravel, Stoney Earth And Earth Mixed With Small Size Boulders Ss.20B The Site Etc., Complete 2 Column 3 Plinth Beam 4 Supplying And Filling In Foundation Andbasement With Filling Stone Dust In Layers Of Not More Than 15Cm.Thick Well Rammed Watered And Compactedetc., Complete Complying With Standard Specification. 5 Cement Concrete 1:4:8 ( One Cement, Five Sand And Ten Hard Broken Stone Jelly ) Using 40 Mm Gauge Hard Broken Granite Stone Jelly For Foundationincluding Dewatering Wherever Necessary And Laid In Layers Of Not More Than 15 Cm Thick Well Rammed, Consolidated And Curing Etc. Complete Complying With Standard Specification 6 Providing And Laying In Position, Standardised Concrete Mix M-20 Grade In Accordance With Is:456-2000, Using 20Mm And Down Graded Hard Broken Granite Stone Jelly For All Rcc Items Of Works With Minimum Cement Content Of 325 Kg / M? And Maximum Water Cement Ratio Of 0.55, Including Admixture ( Plasticiser / Super Plasticiser ) In Recommended Proportions As Per Is:9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability With About ( 5 Cu.M. ) 7730 Kg. Of 20Mm Machine Crushed Stone Jelly And With About ( 3.3 Cu.M. ) 5156 Kg. Of 10-12Mm Machine Crushed Stone Jelly And With About ( 4.79 Cu.M. ) 7670 Kg. Of Sand, But Excluding Cost Of Reinforcement Grill And Fabricating Charges, Centering And Shuttering And Also Including Laying, Vibrating With Mechanical Vibrators Etc Completed 7 Centering For Soffits Of Rcc Slabs Of Plane Surface Like Lintels, Beams , Etc., Including Strutting 3M High Using Mild Steel Sheets Of Size 90Cm X60cm X And B.G 10 Stiffened With M.S Angles Of Size 25Mm X 25Mm X 3Mm Laid Over Silver Oak ( C.W ) Joists Of Size 10Cm X 6.5Cm ( Spaced At About 90Cm C / C ) And Supported Dy Casurina Props Of 10Cm To 13Cm Dia ( Spaced Of 75Cm C / C ) Complying With Standard Specification And Directed 8 Column 9 Plinth Beam 10 Suppling And Fabricating And Placing In Position Ms ( Or ) R.T.S. Bar For Reinforcement To All Rcc Works As Per The Design Given Including Cost Ofsteel And Binding Wire Also In All Floors. 11 Brick Work In Cm 1:5 Mix Using Second Class Ground Moulded Chamber Burnt Bricks 9 X 4 3 / 8 X 2 ¾ Sizeincluding Cost And Conveyance Of Materials And Labour Charges Etc., Complete As Per Standard Specification. ( Item No. 2B ) 12 Foundation & Basement 13 Super Structure In Gf 14 Plastering With Cm 1:5 Mix Using 12Mm Thick Including Cost And Conveyance Of Materials And Labour Charges Etc., Complete As Per Standard Specification 15 Painting Two Coats With Ready Mixed Plastic Emulsion Paint S.I.358 Plastic Emulison Paint OfApproved Quality And Colour Over A Priming Coat, Including Thorough Scrap Ping, Clean Removal Of Dirt, Etc Complete And Including Necessary Plaster Of Paris, Putty, Wherever Required - 10 M 2 16 Supply Delivery And Filling Of Carted Earth In Layer Of Not More Than 15Cm Thick Including Watering With All Layers And Consolidation Complying With Standard Specifications Inlcuding Cost And Conveyance Of All Materials And Labour Charges Etc., Complete 17 Plaincement Concrete 1:2:4 Mix ( One Cement, Two Fine Aggregate And Four Course Aggregate ) Using 20Mm Iss Hbg Metal Including All Cost Conveyance Of Materials And Labour Charges Including Vibrating Charges Etc. Complete As Per Standard Specification. 18 Supplying And Fixing M.S Grill To Doors, Special Windows And Ventilators, Square Tube, Rectangular Tube, I Section Etc Using 20Mmx6mm As Directed By The Departmental Officers Inclusive Of Cost Of Ms Grill Including One Of Red Oxide And Fixing In Position Etc. Complete ( As Per The Schedule Of Rate ) 19 Supplying, Fabricating, Erecting Structural Steel Work For Roofing Welded Or Bolted Type Using Ms Channels, Angles, Plates And Round Bars Etc. Conforming To Is Specification Including Primer Coating And Enamal Painting As Per Design Given By The Departmental Officers Etc, Complete As Per Standard Specification 20 Roofing With Galvanised Coruugated Iron Sheet Of 0.8Mm Thickness - 10 M2 21 Providing & Fixing Pvc Rain Water Downfall Pipe Of The Following Dia With Necessary T.W.Clamps Plugs, Shoes, Bemds, Other Clamps, Screws Nails Etc., Complete Complying With Standard Specification. The Rate Is Inclusive Of Cost Of Removable Iron Gratings Of Appropriate Size. The Size Of Teak Wood Plugs Used Is 150X25mm In Front & 200X75mm In Rear ( Wall Side ) With A Depth Of 110Mm. The Pipe Is To Be Fixed By Means Of U Clamps At The Centre Of Pipes To Be Fixed.110Mm Dia Pvc Pipe [ 4 Kg / Sqcm ] 22 Supply, Delivery And Fixing Of The Following Isi Make Water Supply Materials Including All Labour Charges Etc., Complete 23 8 Dia Pvc Pipe 24 8 Dia Pvc Bend 25 Wiring With 2 X 1.5 Sq.Mm. ( 22 / 0.3 ) Pvc Insulated Single Core Unsheathed Copper Conductor Cable Of 1100V Grade In Suitable Heavy Gauge Ms Conduit Pipe On Wall And Ceiling With Ms Accessories With Ms Switch Box And 5A Ft Switch With Painting Of Suitable Colour Continuous Earth Wire Connection Of 14 Swg Tc Wire For Light Point / Fan Point ( For Electronic Regulator ) ( Sd-22 ) 26 Wiring With 2 X 4 Sq.Mm. ( 56 / 0.3Mm ) Pvc Insulated Single Core Unsheathed Copper Cable Conductor Cable Of 1100V Grade In Suitable Heavy Gauge Ms Conduit Pipe On Wall And Ceiling With Ms Accessories With 150Mm X 100Mm X 75Mm Ms Switch Box For 15A 3 Pin Non Interlocking Cs Plug With Painting Of Suitable Colour With Continuous Earth Wire Connection By 14 Swg Tc Wire For Open Power Plug Point ( Sd-39 ) 27 Supply And Run Of 2 Of 1.5 Sq.Mm. ( 22 / 0.3 ) Pvc Insulated Single Core Unsheathed Copper Conductor Of 1100V Grade In Suitable Pvc Rigid Pipe On Wall And Ceiling With Continuous Earth Wire Connection 14 Swg Tc Wire With Painting Of Suitable Colour ( Sd-54 ) 28 Supply And Fixing Of Single Box Type 440W Fluorescent Fitting Complete With Copper Choke And Condensor With Conduit Pipe Suspension From The Ceiling With Pvc Unsheathed Copper Leads From Terminals To The Fitting With Tube ( Sd -88 ) 29 Supply And Fixing Of 25Mm G.I. Service Pipe With Bend Including Cost And Conveyance Etc., Complete., As Per Standard Specification As Directed By The Departmental Officers 30 Painting With Two Coats Of Approved Colour Painting Including Cost And Conveyance Of Materials And Labour Charges Etc. Complete As Per Standard Specification For ( New Iron Surface ) 31 Supply And Fixing Of 1200Mm ( 48 ) Sweep Ac Ceiling Fan Complete With Stepped Electronic 300W Regulator With 1Metre Down Rod With Fan Clamp With Side Plates And Cross Arm Of Size 450Mm ( 18 ) ( Sd - 106 ) 32 Hydraulic Plastic Bailing Machine With Mechanical Vertical Clamping Force - Ms Body - Chamber Size 700 X 500 X 1400 ( Mm ) - Bail Size 700 X 500 X 650 ( Mm ) With Bail Weight Of 50-60Kg, 15-20 Cycle Time Per Bale In Minutes, Single Cylinder 700 X 500 ( Mm ) - Hydraulic System Gear Cum Plunger Pump System And Day Light Gap Between Bottom Plate And Pressing Plate 1400 Mm Motor Power 7.5 Hp, 2Nos Ties Of Rope, Single Door, Body Plate 8 Mmm Thickness, Clamping Plate Thickness 30 Mm And 3 Phase - Electrical Control System - Manual Bale Eject Swing Plate With Screw System, Hand Lever Operated And Drainage System For The Residual And Fluid / Liquid While Rushing / Pressing The Material Provisions, Overall Weight Of The Machine In 1000 Kg Overall Dimensions Of The Machine In Mm X Mm X Mm ( Length X Width X Height ) 700X500x650 Mmadditional Parameters: The Machine Should Be Painted And Power Coated To Avoid Rust, Packaging Should Be Into Crate Using Timber Bracing, Electrical Safety System Shall Confirm To Is 302, Instruction Mannual, Service Details, Maintanance Manual L To Be Provided With The Machine, Installation And Demonstration To Be Completed By The Seller Before Acceptance Of Item, Certificates: Manufacturer Of The Machine Shal Be Holdingiso 9001:2008 / 2015 Certification, Details Of Iso Certification Picl / Qms / 0518 / 2059 31.05.2018, Test Certificate From Govt / Nabl / Ilac Approved Lab Regarding Various Performance Parameters Indicated As Well As Electrical Saftey Systems As Per Is 302, Test Report No Gm / 2019 / 78 Test Report Date 25 / 11 / 2019, Name And Address Of Lab Gujarat Metal & Equipment Testing Lab- Rajkot Copies Of All Certifications And Test Reports To Be Provided To Buyer On Demand At Time Of Supplies . Including Labour Cost. ( Warranty 1 Year ) 33 Procurement Of Plastic Pulvariser Of 100Kg / 1Hour Capacity 34 Sorting Table 8.00 X 1.50M 35 Weighing Machine 2000 Kg 36 Fork Lift Manual 1 Ton 37 Solid Pvc Door Shutters Using 19 Gauge 19Mm Ms Square Tubes For Styles And Outer Frames. 15Mm Ms Square Tubes For Top, Lock And Bottom Rails. The Steel Tubes Shall Be Covered With 5Mm Thick Solid Pvc Sheets. Shutter Using 5Mm Thick Solid Pvc Sheets For Panelling Shall Rigidly Fixed In Position Including Necessary Furniture And Fittings. The Over All Size Of Styles Shall Be 50Mm X 30Mm. The Over All Size Of Top Rail, Lock Rail And Bottom Rail Shall Be 75Mm X 30Mm. The Over All Size Of Frames Shall Be 50Mm X 45Mm With Suitable Rabate For Housing The Shutter
