Construction Of Bvk / C Hall ( Revenue ) Sh:- Renovation And Annual Repair And Maintenance Of Of Bvk At D-3Blocknand Nagri- 1 Repair To Plaster Of Thickness 12 Mm To 20 Mm In Patches Of Area 2.5 Sqm And Under Including Cutting The Patch In Proper Shape, Racking Out Joints And Preparing And Plastering The Surface Of The Walls Complete Including Disposal Of Rubbish To The Dumping Ground Within 50 Metres Lead 2 With Cement Mortar 1:4 ( 1 Cement : 4Fine Sand ) 3 Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Metres Lead 4 Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer - In - Charge 5 In Cement Mortar 6 Removing Mortar From Bricks And Cleaning Bricks Including Stacking Within A Lead Of 50 M ( Stacks Of Cleaned Bricks Shall Be Measured ) 7 From Brick Work In Cement Mortar 8 Deduct For Using Old Retrieve Of Fps Bricks Tiles Of Cd-100 Of Standard Size ( 1309 / 190.59 ) 9 Demolishing Rcc Work Manually / By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Metre Lead As Per Direction Of Engineer - In - Charge 10 Providing And Fixing Concertina Coil Fencing With Required Dia 610 Mm ( Having 15 Nos. Round Per 6 Metre Length ) Up To 3M Height Of Wall With Existing Angle Iron Y Shaped Placed 2.4 M Or 3.00 M Apart And With 9 Horizontal R.B.T. Stud Tied With G.I. Staples And G.I. Clips To Retain Horizontal Including Necessary Bolts Or G.I. Barbed Wire Tied To Angle Iron All Complete As Per Direction Of Engineer-In-Charge With Reinforced Barbed Tape ( R.B.T. ) / Spring Core ( 2.5Mm Thick ) Wire Of High Tensile Strength Of 165 Kg / Sq.Mm With Tape ( 0.52 Mm Thick ) And Weight 43.478Gm / Metre ( Cost Of M.S. Angle, C.C. Blocks Shall Be Paid Separately ) 11 Welding By Gas Or Electric Plant Including Transportation Of Plantat Site Etc. Complete. 12 Regrading Terracing Of Mud Phaska Covered With Tiles Or Brick, In Cement By Dismantling Tiles Or Bricks, Removing Mud Plasterpreparing The Surface Of Mud Phaska To Proper Slope Relaying Plaster Gobri Leaping And Tiles Or Bricks, Grouted In Cement Mortar 1:3 ( 1 Cement : 3 Fine Sand ) Including Replacing Unserviceable Tiles Or Bricks With New Ones And Disposal Of Unserviceable Material To The Dumping Ground ( The Cost Of The New Tiles Or Brick Excluded ) Within 50 Metre Lead. 13 Providing Gola 75 X 75 Mm In Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 10 Mm And Down Gauge ) Including Finishing With Cement Mortar 1:3 ( 1 Cement : 3Fine Sand ) As Per Standard Design: 14 In 75 X 75 Mm Deep Chase 15 Making Khurras 45 X 45 Cm With Average Minimum Thickness Of 5 Cm Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) Over P.V.C Sheet 1 M X 1 M X 400 Micron, Finished With 12 Mm Cement Plaster 1:3 ( 1 Cement : 3 Coarse Sand ) And A Coat Of Neat Cement Rounding The Edges And Making And Finishing The Outlet Complete 16 Removing Dry Or Oil Bound Distemper, Water Proofing Cement Paint And The Like By Scrapping, Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 17 Removing White Or Colour Wash By Scrapping And Sand Paperingand Preparing The Surface Smooth Including Necessary Repairs Toscratches Etc. Complete 18 White Washing With Whiting To Give An Even Shade 19 Old Work ( Two Or More Coats ) 20 White Washing With Lime To Give An Even Shade: 21 New Work ( Three Or More Coats ) 22 Distempering With Oil Bound Washable Distemper Of Approved Brandand Manufacture To Give An Even Shade 23 New Work ( Two Or More Coats ) Over Including Priming Coat Withcement Primer 24 Distempering With Oil Boundwashable Distemper Ofapproved Brand And Manufacture To Give An Even Shade 25 Old Work ( One Or More Coats ) 26 Painting With Synthetic Enamel Paint Of Approved Brand Andmanufacture To Give An Even Shade : 27 Two Or More Coats On New Work 28 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 29 Steel Work Welded In Built Up Sections / Framed Work Includingcutting, Hoisting, Fixing In Position And Applying A Priming Coat Ofapproved Steel Primer Using Structural Steel Etc. As Required. 30 In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gatesand Similar Works. 31 Providing And Laying Cement Concrete In Retaining Walls, Return Walls, Walls ( Any Thickness ) , Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping, Bed Block, Anchor Blocks, Plain Window Sills, Fillets Etc. Upto Floor Five Level, Excluding The Cost Of Centring, Shuttering And Finishing 32 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mmnominal Size ) 33 Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. 34 Fixed To Openings / Wooden Frames With Rawl Plugs Screws Etc. 35 Dismantling Doors, Windows And Clerestory Windows ( Steel Or Wood ) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead : 36 Of Area 3 Sq. Metres And Below 37 Providing And Fixing 1Mm Thick M.S. Sheet Door With Frame Of 40X40x6 Mm Angle Iron And 3 Mm M.S. Gusset Plates At The Junctions And Corners, All Necessary Fittings Complete, Including Applying A Priming Coat Of Approved Steel Primer. 38 Using Flats 30X6mm For Diagonal Braces And Central Cross Piece 39 Providing And Fixing T-Iron Frames For Doors, Windows And Ventilators Of Mild Steel Tee-Sections, Joints Mitred And Welded, Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer. 40 Fixing With 15X3 Mm Lugs 10 Cm Long Embedded In Cement Concrete Block 15X10x10 Cm Of C.C. 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) 41 Kota Stone Slab Flooring Over 20 Mm ( Average ) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab, Including Rubbing And Polishing Complete With Base Of Cement Mortar 1 : 4 ( 1 Cement : 4 Coarse Sand ) : 42 25 Mm Thick 43 Kota Stone Slabs 20 Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On 12 Mm ( Average ) Thick Cement Mortar 1:3 ( 1 Cement: 3 Coarse Sand ) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete. 44 Providing And Laying Vitrified Floor Tiles In Different Sizes ( Thickness To Be Specified By The Manufacturer ) With Water Absorption Less Than 0.08%And Conforming To Is : 15622 , Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Jointing With Grey Cement Slurry @ 3.3Kg / Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. 45 Size Of Tile 600X600 Mm 46 Dismantling Stone Slab Flooring Laid In Cement Mortar Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead 47 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require : 48 White Vitreous China Wash Basin Size 630 X 450 Mm With A Pair Of 15 Mm C.P.Brass Pillar Taps. 49 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass ( Of Approved Quality ) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. 50 Providing And Fixing Ptmt Liquid Soap Container 109 Mm Wide, 125 Mm High And 112 Mm Distance From Wall Of Standard Shape With Bracket Of The Same Materials With Snap Fittings Of Approved Quality And Colour, Weighing Not Less Than 105 Gms. 51 Providing And Fixing Ptmt Towel Ring Trapezoidal Shape 215 Mm Long, 200 Mm Wide With A Minimum Distance Of 37 Mm From Wall Face With Concealed Fittings Arrangement Of Approved Quality Colour And Make Weighing Not Less Than 88 Gms 52 Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fittings Arrangement Of Approved Quality And Colour. 53 600 Mm Long Towel Rail With Total Length Of 645 Mm, Width 78 Mm And Effective Height Of 88 Mm, Weighing Not Less Than 190 Gms 54 Providing And Fixing G.I. Pipes Complete With G.I. Fittings And Clamps, Including Cutting And Making Good The Walls Etc. 55 Internal Work – Exposed On Wall. 56 15Mm Dia Nominal Bore 57 20Mm Dia Nominal Bore 58 25Mm Dia Nominal Bore 59 Providing And Fixing G.I. Pipes Complete With G.I. Fittings Including Trenching And Refilling Etc. 60 External Work 61 25Mm Dia Nominal Bore 62 32Mm Dia Nominal Bore 63 Making Connection Of G.I. Distribution Branch With G.I. Main Of Following Sizes By Providing And Fixing Tee, Including Cutting And Threading The Pipe Etc. Complete : 64 25 To 40 Mm Nominal Bore 65 Mirror Polishing On Marble Work / Granite Work / Stone Work Where Ever Required To Give High Gloss Finish Complete 66 Providing And Fixing White Vitreous China Pedestal Type Water Closet ( European Type W.C. Pan ) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device ( Handle Lever ) , Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required : 67 W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 68 Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approved Quality ( Screwed End ) : 69 25 Mm Nominal Bore 70 32 Mm Nominal Bore. 71 Providing And Fixing Ball Valve ( Brass ) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete : 72 25 Mm Nominal Bore 73 Providing And Fixing Gun Metal Non- Return Valve Of Approved Quality ( Screwed End ) : 74 40 Mm Nominal Bore 75 Vertical 76 Painting G.I. Pipes And Fittings With Synthetic Enamel White Paint Over A Ready Mixed Priming Coat, Both Of Approved Quality For New Work : 77 25 Mm Diameter Pipe 78 32 Mm Diameter Pipe. 79 Painting G.I. Pipes And Fittings With Two Coats Of Anti-Corrosive Bitumastic Paint Of Approved Quality : 80 32 Mm Diameter Pipe 81 25 Mm Diameter Pipe 82 Providing And Fixing G.I. Union In G.I. Pipe Including Cutting And Threading The Pipe And Making Long Screws Etc. Complete ( New Work ) 83 15 Mm Nominal Bore 84 32 Mm Nominal 85 Providing And Placing On Terrace ( At All Floor Levels ) Polyethylene Water Storage Tank Isi : 12701 Marked With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank 86 Providing And Fixing Ptmt Bib Cock Of Approved Quality And Colour. 87 15Mm Nominal Bore, 86 Mm Long. Weighing Not Less Than 88 Gms. 88 24 Mm Thick ( Average ) Wash Marble Chips Plaster With Deep Groove Joints In Two Layers Under Layer 12 Mm Cement Plaster 1:4 ( 1 Cement : 4 Coarse Sand ) Furrowing The Under Layer With Scracting Tool Applying Cement Slurry On The Under Layer @ 2 Kg Of Cement Per Sqm And Top Layer 12 Mm Thick With Marble Chips White Or Black Or Baroda Green Of Size 4 Mm Laid In Cement In Proporation Of 4:7 ( 4 Cement : 7 Marble Chips ) By Volume, Washed With Water And Nylon Brush Including Making Panels With Wooden Fillets Of Groove Sizecomplete As Per Direction Of Engineer - In - Charge 89 Brick Work With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 75 In Superstructure Above Plinth Level Upto Floor V Level In All Shapes And Sizes In: 90 Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 91 Half Brick Masonry With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Upto Floor V Level 92 Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) 93 Supply Of Earth And Banking The Same In Layers Not Exceeding 20 Cm In Depth Breaking Clods Watering Rolling Each Layer With Half Tonne Roller Or Wooden Or Steel Rammers And Dressing Of In Embankments For Roads, Flood Banks, Guide Banks Or Filling Of Ground Depression With All Lead, Lift Etc. Complete 94 Providing And Laying Dry Brick Aggregate 40Mm Nominal Size Foundation And Plinth Including Spreading And Ramming In Layers As Directed By Engineer-Incharge. 95 Lettering With Black Japan Paint Of Approved Brand And Manufacture 96 Carriage Of Material By Mechanical Transport Including Loading Unloading And Stacking 97 I ) Lime Moorum Building Rubbish Lead For 5.00Km. 98 Forming Groove Of Uniform Size From 12X12mm And Upto 25X15mm In The Top Layer Of Washed Stone Grit Plastered Surface As Per Approved Pattern, Including Providing And Fixing Aluminum Channels Of Appropriate Size And Thickness ( Not Less Than 2 Mm ) , Nailed To The Under Layer With Rust Proof Screws And Nails And Finishing The Groove Complete As Per Specifications And Direction Of The Engineer-In-Charge. 99 Dismantling W.C. Pan Of All Sizes Including Disposal Of Dismantled Materials I / C Malba All Complete As Per Directions Of Engineer-In- Charge. 100 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 ( Thickness To Be Specified By The Manufacturer ) , Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete 101 Painting With Aluminium Paint Of Approved Brand And Manufacture To Give An Even Shade . 102 Two Or More Coats On New Work 103 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : 104 One Or More Coats On Old Work. 105 Add 21.46% As Circulated By Delhi Govt. 106 Minus 9.5% As Circulated By Delhi Govt.
