Renovation Of Grama Panchayat Conference Hall, Kannur-Kerala

Renovation Of Grama Panchayat Conference Hall Pushback Chair , Renovation Of Grama Panchayat Conferrence Hall , Model No: Jc-M Push Back Back Frame: 660Mm X 430Mm Made With 20Mm X 20Mm- 16Swg Tube, Pu Injection Moulded Foam Average 2”- 2.5” Thick With Head Rest & Lumbar Support Of 50-52 Kg / M3, With Back Cover Ppcp Injection Moulded & Frames Stripped With 22 Swg Sheet To Support Foam And All Metal Portions Powder Coated. Seat Frame: 430Mm X 430Mm Made With 25Mm X 25Mm Pipe 18Swg, Pu Injection Moulded Foam Of 430Mm X 430Mm Average 3”-3.5” Thick Of 55-56 Kg / M3 Density, Bottom Side Covered With And Frames Stripped With 22 Swg Sheet In Suitable Spacing And Topped With 3Mm Hard Board To Support Pu Foams And All Metal Portions Powder Coated. Side Stand: : 600Mm X 400Mm Fabricated With 25Mm X 25Mm- 18Swg Pipe And 40 X 6 Mm Ms Flat For Foundation Fabricated To Shape, Pu Bend ( Without Cupholder ) Or Ppcp Cupholder Arm Rest And All End Passage Viewing Stand Will Be Fully Upholstery Covered Up To Bottom And All Inside Legs Half Portion Upholstery With 5Mm Hardboard And All Metal Parts Powder Coated. Mechanism: Roller And Box Type, Roller Of 14Mm Thick Nylon Casted Noise Free Treated Metal Roller And Box 2 Nos. Each Made Fabricated With 50Mm X 3Mm Thick Flats, 20Mm Sq. 18 Swg Pipe 2 Stays, Provided With Coil Springs / Hydraulic Gas Springs And Of Lacquer Paint Finished Or Powder Coated. Upholstery:3Mm Foam Laminated Fabric Of Approved Shade Of Special Fabric Made For Theatre Seating. ( Water Repellent & Fire Retardant Optional ) Foundation Bolt:90 X 8Mm, Chemical Bonding With 2 Nos. Each Per Leg. General: 1 ) All Seats Can Provide Logo Design With Emblem-Embroidery. ( Optional ) 2 ) Centre To Centre Of Chairs Will Be 50-52Cm ( Customised ) . 3 ) The Overall Height Of The Chair Should Be 102Cm. Should Supply In Site ( Gst Included )

INR 236 /-

INR 9000.0 /-

INR 9 Lakhs /-