Medical And Health Services -MAHS has published Tender For 1-Remaining Work Repair Roof, Flooring, Toilets At Shc Anjana, Daulpura, Madda Ki Bassi, Nardas Ka Gudda, Sangawas, Tapalo Ka Kheda, Bharat Singh Ka Guda, Kalesriya, Pardi, Mad, Narana, Tokra, Isharmand And Phc Kundwa In Block Deogarh(Ris. Submission Date for this Tender is 17-01-2023. Shed Construction Tenders in rajsamand Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Name of Work : Repair Work of Roof, Flooring, Toilet at SHC Anjana, Block:- Deogarh, Dist. - Rajsamand |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mtr lead |
| 3 | Dismantling of flooring with care including stacking of serveciable material and disposal of unserviceable material with in 50 mtr lead for: Cement Concrete Flooring |
| 4 | Dismantling roofs with care including stacking of serviceable material and disposal of unserviceable material within 50 mtr lead for : Lime Terrace |
| 5 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead. Of area 3 square meter and below |
| 6 | Providing and laying in position cement concrete including curing compaction etc . Completein specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 7 | Half brick masonry in superstructure up to third storey including cost of nominal hoopreinforcement ( 2 Nos. 6 mm dia M.S. bar at every forth course ) using bricks of designation 75Cement mortar 1:4 ( 1 cement : 4 coarse sand ) |
| 8 | Providing and fixing Ist quality standard White/ ivory,grey, fuma red brown, light green, light blue and other light shades Glazed Tiles of (confirming to IS : 13753 & IS 13622) of size 300 mm x 200 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls & pillars ). |
| 9 | Providing and fixing Ist quality MAT finished ceremic tiles size 300 x 300 mm confirming to IS: 13755 & IS: 15622 colour such as white, grey, Ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4). |
| 10 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure"A". 30 mm ThickCommercial Veneer both side |
| 11 | Add extra in flush doors :For external teak wood lipping on flush door 30 mm x 6 mm |
| 12 | Add extro for Sunmica 0.8 mm thick. |
| 13 | Providing and fixing Granite stone slab thickness 16 - 18 mm mirror polished and machine cut in walls, pillars, steps, shelves, counter, floors etc. laid on 12 mm (Av.) thick base of cement mortar 1:3(1 cement : 3 coarse sand) jointing with white cement mortar 1:2 ( 1 White cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of. Green/Black/Other granite . Above 3601 cm2 Slabs |
| 14 | Extra for providing edge moulding to 16 - 18 mm thick marble stonecounters . vantities etc. Over item No. 7.1 & 7.2 including machines polishing to edge to give high gloss finish etc. Complete as per design approved by Engineer - in- charge. Granite Work |
| 15 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade,laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. Size 600 mm x 600 mm |
| 16 | 35mm thick Rough chiesel dressed stone flooring of approved shade set in pattern over 20mm thick base of cement mortar 1:6 ( 1 cement : 6 coarse sand) and jointed with cement sand mortar 1:3 complete in all respects: Nimbahera Stone |
| 17 | Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish:20mm thick |
| 18 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work including prepration of base with primer putty lippy complete in all respect. |
| 19 | Applying Birla /JK white cement based putty over cement plaster surface for making even surface |
| 20 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). |
| 21 | Providing and fixing T-iron frames for doors windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs, 10cm long embedded in cement concrete blocks 15x10x10cm of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screw or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 22 | Painting with enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 23 | Marble stone flooring table rubbed, 16 - 18 mm thick over 20 mm (Av.) thick base of CM 1:4( 1 Cement : 4 coarse sand) jointing with white cement mortar 1:2 ( 1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding rubbing and polishing complete. Green Marble Upto 800 cm2 tiles |
| 24 | Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 guage Thickness, joint mitred welded and grinded including hold fast of lugs 13mmx 3mm and 15cm long embedded in C.C. block 15x10x10cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of approved quality,windows shutters made out of 50x25mm hollow steel section 15 mm paitam of 18 guage thickness, joint mitred and grinded including 10mmx10mm square bras welded to frame for paitam fixing float glass 4 mm thick panes with glazzing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100mmlong, tower bolts 100mm long of steel powder coate superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respectas per direction of Engineer-in-charge. |
| 25 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not exceeding 150mm distance. |
| 26 | Providing and fixing square bars or other flat welded to window ventilatiors etc. |
| 27 | Renewing glass panes, with putty and nails wherever necessary : 5.5 mm thick plain glass panes |
| 28 | Grading for roof water proofing treatment with : Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) with water proofing compound as per manufacturs"s specification |
| 29 | Providing and fixing tiles overroof fixed in25mm thick in cement mortar 1:4 bed complete. 20 mm thick plain C.C. roofing tiles |
| 30 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finishing with cement mortar 1:3 as per standard design. |
| 31 | Part "B" Sanitary Work |
| 32 | P & F Indian type white glazed vitreous china Ist quality W.C.orissapan (I.S: 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor. Size 580 x 440 mm |
| 33 | P & F WVC wash basin (Ist quality, I.S.: 2556 Mark) of approved make with C.I. brackets duly painted 1 No 15 mm C.P. pillar cock (I.S. : 8934 Mark) & 32 mm C.P. brass wastecoupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.Size 550x400mm |
| 34 | P &F Kitchen & Lab. Sink of approved make with C.I. bracketsduly painted 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor. 1.0 mm thick Salem stainless steek AISI- 304 kitchen sink of approved make (Nirali, Neel Kanth, Jaina, Faber-castelll) with large waste coupling.Overall Sizes 22 x18 x 7 inches, Bowl sizes 20 x16 x 7 inches |
| 35 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). |
| 36 | 20mmNominal outer dia pipes |
| 37 | 32mmNominal outer dia pipes |
| 38 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: |
| 39 | C.P. Brass bib cock,15mm nominal bore. |
| 40 | C.P. Brass Long body, 15mm nominal bore weight not less than 690 gm |
| 41 | P & F Towel Rail or Ring of approved quality/ make:C.P. brass towel rail with brackets 450 x 20 mm |
| 42 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.400 gm,15mm. |
| 43 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked) |
| 44 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : |
| 45 | Gun-metal 20mm nominal bore. |
| 46 | Gun-metal 32mm nominal bore. |
| 47 | P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make : C P Brass concealed 25mm nominal bore. |
| 48 | P & F 15 mm. Dia Connection Pipe of approved quality/make : PVC pipe with C.P. Brass nuts upto length, 450mm |
| 49 | P & F Looking Mirrors with P.V.C. frame of approved (Atul Modi Guard Saint Gobin or equivalent)Size 500 x 400 mm |
| 50 | P & F PVC Storage Tank (IS : 12701 marked indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity |
| 51 | Hoisting charges for each floor |
| 52 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 110mm dia |
| 53 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality /make. |
| 54 | Bend 87.5 Dg. 110mm dia |
| 55 | Single Tee 110mm dia |
| 56 | Coupler110mm dia |
| 57 | Vent Cowel 100 mm |
| 58 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia |
| 59 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: |
| 60 | Coupler (socket) - 110 mm dia |
| 61 | Bend 87.5- 110 mm dia |
| 62 | Pipe clip - 110 mm dia |
| 63 | P & F Soap Dish or Tray of approved quality/make C.P. brass heavy and superior quality. |
| 64 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI marked medium duty PVC conduit & it"s accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 A switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.G1 |
| 65 | Short point (up to 3 mtr.) |
| 66 | Medium point (up to 6 mtr.) |
| 67 | Long point(up to 10 mtr.) |
| 68 | Wiring of 3 pin 5 amp. light plug point with 1.5 sq. mmFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved makein surface / recessed ISI marked medium duty PVC conduit & it"s accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 Aswitch, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.G1 On board |
| 69 | Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175 x 100 x 60 mm. on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet, making connection , testing , etc. as required.G1 |
| 70 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required.G1 1x1.5sqmm |
| 71 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 72 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 73 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar, conforming to IS13032 & IS8623 including making internal DBterminations with copper lugs , testing etc. as required.G1 Double door (single phase) 12 Way |
| 74 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.GROUP 1 |
| 75 | Single pole MCB6 A to 32 A rating |
| 76 | Double pole MCB6 A to 32 A rating |
| 77 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required includingcutting the wall and making good the same as required.GROUP 1 |
| 78 | 20 mm |
| 79 | 25 mm |
| 80 | Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying3 to 4 mtr. below the ground level with 25mm dia. G.I. "B" class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C.finished chamber covered with hinged type with locking arrangement C.I. Cover,C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. |
| 81 | S & Laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 10 SWG copper. Wire |
| 82 | P & F of IP 20 LED tube light 20 watt with external batten made from CRCA sheet steel suitable to replace T-B/T-12 tube light, integral driver, 2000 luman + 5olo tolerarrce system luman efficiacy of 100 Lm/ watt minimum expected life time of 25000 burning hours, CCT 5700 I( ANSI, CRI 80, driver efficiency >850/o, Life expectancy of driver rnin 30000 hrs. PF 0,95 at full load/ 230 volt AC. |
| 83 | P & F double ball bearing capacitor start ceilingfan of approved make complete with regulator and other accessories as required. GROUP 1 1200 mm sweep |
| 84 | P & F IP-65 / IP-66 protected LED street light luminaire on existing bracket. Fixture made from powder coated single piece pressure die cast aluminium housing with UV stablized PC/Toughened glass cover (from 45W onwards) and should be secondary lens on each LED. The System level luminaire efficacy = 100 with high power LEDs of CREE/NICHIA/OSRAM/PHILPS/SEOUL make is to be used. The LED driver shall be BIS certified and input voltage AC 110 to 270 V AC with input voltagefrequency 50 Hz +3% Power factor 0.95 Driver eficiency 85%, THD () 10% Humidity 10% to 90% RH working temp. - 20C to 50C. Life expectancy equal or more than 50000 buring hrs. with minimuum 70% initial lumens maintained, Rendering index - 75% surge protection shall be min - 5 kv internal and min 10 KV external. Manufactures work mark/name engraved/embossed on die cast housing to allow traceability / authenticity till life of fixture. Fixtures shall be CE complianed. LED street Lifht fixture 30 Watt. |
| 85 | S & F of Street light bracket made out from following size of " B "class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required.32 mm dia |
| 86 | Repair Work of Roof, Flooring, Toilet at SHC Bharat Singh Ka Gudda, Block:- Deogarh, Dist. - Rajsamand |
| 87 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mtr lead |
| 88 | Dismantling of flooring with care including stacking of serveciable material and disposal of unserviceable material with in 50 mtr lead for: Cement Concrete Flooring |
| 89 | Dismantling roofs with care including stacking of serviceable material and disposal of unserviceable material within 50 mtr lead for : Lime Terrace |
| 90 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead. Of area 3 square meter and below |
| 91 | Providing and laying in position cement concrete including curing compaction etc . Completein specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 92 | Half brick masonry in superstructure up to third storey including cost of nominal hoopreinforcement ( 2 Nos. 6 mm dia M.S. bar at every forth course ) using bricks of designation 75Cement mortar 1:4 ( 1 cement : 4 coarse sand ) |
| 93 | Providing and fixing Ist quality standard White/ ivory,grey, fuma red brown, light green, light blue and other light shades Glazed Tiles of (confirming to IS : 13753 & IS 13622) of size 300 mm x 200 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls & pillars ). |
| 94 | Providing and fixing Ist quality MAT finished ceremic tiles size 300 x 300 mm confirming to IS: 13755 & IS: 15622 colour such as white, grey, Ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4). |
| 95 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure"A". 30 mm ThickCommercial Veneer both side |
| 96 | Add extra in flush doors :For external teak wood lipping on flush door 30 mm x 6 mm |
| 97 | Add extro for Sunmica 0.8 mm thick. |
| 98 | Providing and fixing Granite stone slab thickness 16 - 18 mm mirror polished and machine cut in walls, pillars, steps, shelves, counter, floors etc. laid on 12 mm (Av.) thick base of cement mortar 1:3(1 cement : 3 coarse sand) jointing with white cement mortar 1:2 ( 1 White cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of. Green/Black/Other granite . Above 3601 cm2 Slabs |
| 99 | Extra for providing edge moulding to 16 - 18 mm thick marble stonecounters . vantities etc. Over item No. 7.1 & 7.2 including machines polishing to edge to give high gloss finish etc. Complete as per design approved by Engineer - in- charge. Granite Work |
| 100 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade,laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. Size 600 mm x 600 mm |
| 101 | 35mm thick Rough chiesel dressed stone flooring of approved shade set in pattern over 20mm thick base of cement mortar 1:6 ( 1 cement : 6 coarse sand) and jointed with cement sand mortar 1:3 complete in all respects: Nimbahera Stone |
| 102 | Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish:20mm thick |
| 103 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work including prepration of base with primer putty lippy complete in all respect. |
| 104 | Applying Birla /JK white cement based putty over cement plaster surface for making even surface |
| 105 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). |
| 106 | Providing and fixing T-iron frames for doors windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs, 10cm long embedded in cement concrete blocks 15x10x10cm of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screw or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 107 | Painting with enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 108 | Marble stone flooring table rubbed, 16 - 18 mm thick over 20 mm (Av.) thick base of CM 1:4( 1 Cement : 4 coarse sand) jointing with white cement mortar 1:2 ( 1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding rubbing and polishing complete. Green Marble Upto 800 cm2 tiles |
| 109 | Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 guage Thickness, joint mitred welded and grinded including hold fast of lugs 13mmx 3mm and 15cm long embedded in C.C. block 15x10x10cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of approved quality,windows shutters made out of 50x25mm hollow steel section 15 mm paitam of 18 guage thickness, joint mitred and grinded including 10mmx10mm square bras welded to frame for paitam fixing float glass 4 mm thick panes with glazzing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100mmlong, tower bolts 100mm long of steel powder coate superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respectas per direction of Engineer-in-charge. |
| 110 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not exceeding 150mm distance. |
| 111 | Providing and fixing square bars or other flat welded to window ventilatiors etc. |
| 112 | Renewing glass panes, with putty and nails wherever necessary : 5.5 mm thick plain glass panes |
| 113 | Grading for roof water proofing treatment with : Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) with water proofing compound as per manufacturs"s specification |
| 114 | Providing and fixing tiles overroof fixed in25mm thick in cement mortar 1:4 bed complete. 20 mm thick plain C.C. roofing tiles |
| 115 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finishing with cement mortar 1:3 as per standard design. |
| 116 | Part "B" Sanitary Work |
| 117 | P & F Indian type white glazed vitreous china Ist quality W.C.orissapan (I.S: 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor. Size 580 x 440 mm |
| 118 | P & F WVC wash basin (Ist quality, I.S.: 2556 Mark) of approved make with C.I. brackets duly painted 1 No 15 mm C.P. pillar cock (I.S. : 8934 Mark) & 32 mm C.P. brass wastecoupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.Size 550x400mm |
| 119 | P &F Kitchen & Lab. Sink of approved make with C.I. bracketsduly painted 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor. 1.0 mm thick Salem stainless steek AISI- 304 kitchen sink of approved make (Nirali, Neel Kanth, Jaina, Faber-castelll) with large waste coupling.Overall Sizes 22 x18 x 7 inches, Bowl sizes 20 x16 x 7 inches |
| 120 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). |
| 121 | 20mmNominal outer dia pipes |
| 122 | 32mmNominal outer dia pipes |
| 123 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: |
| 124 | C.P. Brass bib cock,15mm nominal bore. |
| 125 | C.P. Brass Long body, 15mm nominal bore weight not less than 690 gm |
| 126 | P & F Towel Rail or Ring of approved quality/ make:C.P. brass towel rail with brackets 450 x 20 mm |
| 127 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.400 gm,15mm. |
| 128 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked) |
| 129 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : |
| 130 | Gun-metal 20mm nominal bore. |
| 131 | Gun-metal 32mm nominal bore. |
| 132 | P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make : C P Brass concealed 25mm nominal bore. |
| 133 | P & F 15 mm. Dia Connection Pipe of approved quality/make : PVC pipe with C.P. Brass nuts upto length, 450mm |
| 134 | P & F Looking Mirrors with P.V.C. frame of approved (Atul Modi Guard Saint Gobin or equivalent)Size 500 x 400 mm |
| 135 | P & F PVC Storage Tank (IS : 12701 marked indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity |
| 136 | Hoisting charges for each floor |
| 137 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 110mm dia |
| 138 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality /make. |
| 139 | Bend 87.5 Dg. 110mm dia |
| 140 | Single Tee 110mm dia |
| 141 | Coupler110mm dia |
| 142 | Vent Cowel 100 mm |
| 143 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia |
| 144 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: |
| 145 | Coupler (socket) - 110 mm dia |
| 146 | Bend 87.5- 110 mm dia |
| 147 | Pipe clip - 110 mm dia |
| 148 | P & F Soap Dish or Tray of approved quality/make C.P. brass heavy and superior quality. |
| 149 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI marked medium duty PVC conduit & it"s accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 A switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.G1 |
| 150 | Short point (up to 3 mtr.) |
| 151 | Medium point (up to 6 mtr.) |
| 152 | Long point(up to 10 mtr.) |
| 153 | Wiring of 3 pin 5 amp. light plug point with 1.5 sq. mmFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved makein surface / recessed ISI marked medium duty PVC conduit & it"s accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 Aswitch, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.G1 On board |
| 154 | Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175 x 100 x 60 mm. on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet, making connection , testing , etc. as required.G1 |
| 155 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required.G1 1x1.5sqmm |
| 156 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 157 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 158 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar, conforming to IS13032 & IS8623 including making internal DBterminations with copper lugs , testing etc. as required.G1 Double door (single phase) 12 Way |
| 159 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.GROUP 1 |
| 160 | Single pole MCB6 A to 32 A rating |
| 161 | Double pole MCB6 A to 32 A rating |
| 162 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required includingcutting the wall and making good the same as required.GROUP 1 |
| 163 | 20 mm |
| 164 | 25 mm |
| 165 | Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying3 to 4 mtr. below the ground level with 25mm dia. G.I. "B" class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C.finished chamber covered with hinged type with locking arrangement C.I. Cover,C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. |
| 166 | S & Laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 10 SWG copper. Wire |
| 167 | P & F of IP 20 LED tube light 20 watt with external batten made from CRCA sheet steel suitable to replace T-B/T-12 tube light, integral driver, 2000 luman + 5olo tolerarrce system luman efficiacy of 100 Lm/ watt minimum expected life time of 25000 burning hours, CCT 5700 I( ANSI, CRI 80, driver efficiency >850/o, Life expectancy of driver rnin 30000 hrs. PF 0,95 at full load/ 230 volt AC. |
| 168 | P & F double ball bearing capacitor start ceilingfan of approved make complete with regulator and other accessories as required. GROUP 1 1200 mm sweep |
| 169 | P & F IP-65 / IP-66 protected LED street light luminaire on existing bracket. Fixture made from powder coated single piece pressure die cast aluminium housing with UV stablized PC/Toughened glass cover (from 45W onwards) and should be secondary lens on each LED. The System level luminaire efficacy = 100 with high power LEDs of CREE/NICHIA/OSRAM/PHILPS/SEOUL make is to be used. The LED driver shall be BIS certified and input voltage AC 110 to 270 V AC with input voltagefrequency 50 Hz +3% Power factor 0.95 Driver eficiency 85%, THD () 10% Humidity 10% to 90% RH working temp. - 20C to 50C. Life expectancy equal or more than 50000 buring hrs. with minimuum 70% initial lumens maintained, Rendering index - 75% surge protection shall be min - 5 kv internal and min 10 KV external. Manufactures work mark/name engraved/embossed on die cast housing to allow traceability / authenticity till life of fixture. Fixtures shall be CE complianed. LED street Lifht fixture 30 Watt. |
| 170 | S & F of Street light bracket made out from following size of " B "class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required.32 mm dia |
| 171 | Repair Work of Roof, Flooring, Toilet at SHC Daulpura, Block:- Deogarh, Dist. - Rajsamand |
| 172 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mtr lead |
| 173 | Dismantling of flooring with care including stacking of serveciable material and disposal of unserviceable material with in 50 mtr lead for: Cement Concrete Flooring |
| 174 | Dismantling roofs with care including stacking of serviceable material and disposal of unserviceable material within 50 mtr lead for : Lime Terrace |
| 175 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead. Of area 3 square meter and below |
| 176 | Providing and laying in position cement concrete including curing compaction etc . Completein specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 177 | Half brick masonry in superstructure up to third storey including cost of nominal hoopreinforcement ( 2 Nos. 6 mm dia M.S. bar at every forth course ) using bricks of designation 75Cement mortar 1:4 ( 1 cement : 4 coarse sand ) |
| 178 | Providing and fixing Ist quality standard White/ ivory,grey, fuma red brown, light green, light blue and other light shades Glazed Tiles of (confirming to IS : 13753 & IS 13622) of size 300 mm x 200 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls & pillars ). |
| 179 | Providing and fixing Ist quality MAT finished ceremic tiles size 300 x 300 mm confirming to IS: 13755 & IS: 15622 colour such as white, grey, Ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4). |
| 180 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure"A". 30 mm ThickCommercial Veneer both side |
| 181 | Add extra in flush doors :For external teak wood lipping on flush door 30 mm x 6 mm |
| 182 | Add extro for Sunmica 0.8 mm thick. |
| 183 | Providing and fixing Granite stone slab thickness 16 - 18 mm mirror polished and machine cut in walls, pillars, steps, shelves, counter, floors etc. laid on 12 mm (Av.) thick base of cement mortar 1:3(1 cement : 3 coarse sand) jointing with white cement mortar 1:2 ( 1 White cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of. Green/Black/Other granite . Above 3601 cm2 Slabs |
| 184 | Extra for providing edge moulding to 16 - 18 mm thick marble stonecounters . vantities etc. Over item No. 7.1 & 7.2 including machines polishing to edge to give high gloss finish etc. Complete as per design approved by Engineer - in- charge. Granite Work |
| 185 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade,laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. Size 600 mm x 600 mm |
| 186 | 35mm thick Rough chiesel dressed stone flooring of approved shade set in pattern over 20mm thick base of cement mortar 1:6 ( 1 cement : 6 coarse sand) and jointed with cement sand mortar 1:3 complete in all respects: Nimbahera Stone |
| 187 | Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish:20mm thick |
| 188 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work including prepration of base with primer putty lippy complete in all respect. |
| 189 | Applying Birla /JK white cement based putty over cement plaster surface for making even surface |
| 190 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). |
| 191 | Providing and fixing T-iron frames for doors windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs, 10cm long embedded in cement concrete blocks 15x10x10cm of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screw or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 192 | Painting with enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 193 | Marble stone flooring table rubbed, 16 - 18 mm thick over 20 mm (Av.) thick base of CM 1:4( 1 Cement : 4 coarse sand) jointing with white cement mortar 1:2 ( 1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding rubbing and polishing complete. Green Marble Upto 800 cm2 tiles |
| 194 | Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 guage Thickness, joint mitred welded and grinded including hold fast of lugs 13mmx 3mm and 15cm long embedded in C.C. block 15x10x10cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of approved quality,windows shutters made out of 50x25mm hollow steel section 15 mm paitam of 18 guage thickness, joint mitred and grinded including 10mmx10mm square bras welded to frame for paitam fixing float glass 4 mm thick panes with glazzing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100mmlong, tower bolts 100mm long of steel powder coate superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respectas per direction of Engineer-in-charge. |
| 195 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not exceeding 150mm distance. |
| 196 | Providing and fixing square bars or other flat welded to window ventilatiors etc. |
| 197 | Renewing glass panes, with putty and nails wherever necessary : 5.5 mm thick plain glass panes |
| 198 | Grading for roof water proofing treatment with : Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) with water proofing compound as per manufacturs"s specification |
| 199 | Providing and fixing tiles overroof fixed in25mm thick in cement mortar 1:4 bed complete. 20 mm thick plain C.C. roofing tiles |
| 200 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finishing with cement mortar 1:3 as per standard design. |
| 201 | Part "B" Sanitary Work |
| 202 | P & F Indian type white glazed vitreous china Ist quality W.C.orissapan (I.S: 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor. Size 580 x 440 mm |
| 203 | P & F WVC wash basin (Ist quality, I.S.: 2556 Mark) of approved make with C.I. brackets duly painted 1 No 15 mm C.P. pillar cock (I.S. : 8934 Mark) & 32 mm C.P. brass wastecoupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.Size 550x400mm |
| 204 | P &F Kitchen & Lab. Sink of approved make with C.I. bracketsduly painted 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor. 1.0 mm thick Salem stainless steek AISI- 304 kitchen sink of approved make (Nirali, Neel Kanth, Jaina, Faber-castelll) with large waste coupling.Overall Sizes 22 x18 x 7 inches, Bowl sizes 20 x16 x 7 inches |
| 205 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). |
| 206 | 20mmNominal outer dia pipes |
| 207 | 32mmNominal outer dia pipes |
| 208 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: |
| 209 | C.P. Brass bib cock,15mm nominal bore. |
| 210 | C.P. Brass Long body, 15mm nominal bore weight not less than 690 gm |
| 211 | P & F Towel Rail or Ring of approved quality/ make:C.P. brass towel rail with brackets 450 x 20 mm |
| 212 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.400 gm,15mm. |
| 213 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked) |
| 214 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : |
| 215 | Gun-metal 20mm nominal bore. |
| 216 | Gun-metal 32mm nominal bore. |
| 217 | P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make : C P Brass concealed 25mm nominal bore. |
| 218 | P & F 15 mm. Dia Connection Pipe of approved quality/make : PVC pipe with C.P. Brass nuts upto length, 450mm |
| 219 | P & F Looking Mirrors with P.V.C. frame of approved (Atul Modi Guard Saint Gobin or equivalent)Size 500 x 400 mm |
| 220 | P & F PVC Storage Tank (IS : 12701 marked indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity |
| 221 | Hoisting charges for each floor |
| 222 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 110mm dia |
| 223 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality /make. |
| 224 | Bend 87.5 Dg. 110mm dia |
| 225 | Single Tee 110mm dia |
| 226 | Coupler110mm dia |
| 227 | Vent Cowel 100 mm |
| 228 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia |
| 229 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: |
| 230 | Coupler (socket) - 110 mm dia |
| 231 | Bend 87.5- 110 mm dia |
| 232 | Pipe clip - 110 mm dia |
| 233 | P & F Soap Dish or Tray of approved quality/make C.P. brass heavy and superior quality. |
| 234 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI marked medium duty PVC conduit & it"s accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 A switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.G1 |
| 235 | Short point (up to 3 mtr.) |
| 236 | Medium point (up to 6 mtr.) |
| 237 | Long point(up to 10 mtr.) |
| 238 | Wiring of 3 pin 5 amp. light plug point with 1.5 sq. mmFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved makein surface / recessed ISI marked medium duty PVC conduit & it"s accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 Aswitch, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.G1 On board |
| 239 | Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175 x 100 x 60 mm. on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet, making connection , testing , etc. as required.G1 |
| 240 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required.G1 1x1.5sqmm |
| 241 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 242 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 243 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar, conforming to IS13032 & IS8623 including making internal DBterminations with copper lugs , testing etc. as required.G1 Double door (single phase) 12 Way |
| 244 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.GROUP 1 |
| 245 | Single pole MCB6 A to 32 A rating |
| 246 | Double pole MCB6 A to 32 A rating |
| 247 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required includingcutting the wall and making good the same as required.GROUP 1 |
| 248 | 20 mm |
| 249 | 25 mm |
| 250 | Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying3 to 4 mtr. below the ground level with 25mm dia. G.I. "B" class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C.finished chamber covered with hinged type with locking arrangement C.I. Cover,C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. |
| 251 | S & Laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 10 SWG copper. Wire |
| 252 | P & F of IP 20 LED tube light 20 watt with external batten made from CRCA sheet steel suitable to replace T-B/T-12 tube light, integral driver, 2000 luman + 5olo tolerarrce system luman efficiacy of 100 Lm/ watt minimum expected life time of 25000 burning hours, CCT 5700 I( ANSI, CRI 80, driver efficiency >850/o, Life expectancy of driver rnin 30000 hrs. PF 0,95 at full load/ 230 volt AC. |
| 253 | P & F double ball bearing capacitor start ceilingfan of approved make complete with regulator and other accessories as required. GROUP 1 1200 mm sweep |
| 254 | P & F IP-65 / IP-66 protected LED street light luminaire on existing bracket. Fixture made from powder coated single piece pressure die cast aluminium housing with UV stablized PC/Toughened glass cover (from 45W onwards) and should be secondary lens on each LED. The System level luminaire efficacy = 100 with high power LEDs of CREE/NICHIA/OSRAM/PHILPS/SEOUL make is to be used. The LED driver shall be BIS certified and input voltage AC 110 to 270 V AC with input voltagefrequency 50 Hz +3% Power factor 0.95 Driver eficiency 85%, THD () 10% Humidity 10% to 90% RH working temp. - 20C to 50C. Life expectancy equal or more than 50000 buring hrs. with minimuum 70% initial lumens maintained, Rendering index - 75% surge protection shall be min - 5 kv internal and min 10 KV external. Manufactures work mark/name engraved/embossed on die cast housing to allow traceability / authenticity till life of fixture. Fixtures shall be CE complianed. LED street Lifht fixture 30 Watt. |
| 255 | S & F of Street light bracket made out from following size of " B "class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required.32 mm dia |
| 256 | Repair Work of Roof, Flooring, Toilet at SHC Isharmand, Block:- Deogarh, Dist. - Rajsamand |
| 257 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mtr lead |
| 258 | Dismantling of flooring with care including stacking of serveciable material and disposal of unserviceable material with in 50 mtr lead for: Cement Concrete Flooring |
| 259 | Dismantling roofs with care including stacking of serviceable material and disposal of unserviceable material within 50 mtr lead for : Lime Terrace |
| 260 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead. Of area 3 square meter and below |
| 261 | Providing and laying in position cement concrete including curing compaction etc . Completein specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 262 | Half brick masonry in superstructure up to third storey including cost of nominal hoopreinforcement ( 2 Nos. 6 mm dia M.S. bar at every forth course ) using bricks of designation 75Cement mortar 1:4 ( 1 cement : 4 coarse sand ) |
| 263 | Providing and fixing Ist quality standard White/ ivory,grey, fuma red brown, light green, light blue and other light shades Glazed Tiles of (confirming to IS : 13753 & IS 13622) of size 300 mm x 200 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls & pillars ). |
| 264 | Providing and fixing Ist quality MAT finished ceremic tiles size 300 x 300 mm confirming to IS: 13755 & IS: 15622 colour such as white, grey, Ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4). |
| 265 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure"A". 30 mm ThickCommercial Veneer both side |
| 266 | Add extra in flush doors :For external teak wood lipping on flush door 30 mm x 6 mm |
| 267 | Add extro for Sunmica 0.8 mm thick. |
| 268 | Providing and fixing Granite stone slab thickness 16 - 18 mm mirror polished and machine cut in walls, pillars, steps, shelves, counter, floors etc. laid on 12 mm (Av.) thick base of cement mortar 1:3(1 cement : 3 coarse sand) jointing with white cement mortar 1:2 ( 1 White cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of. Green/Black/Other granite . Above 3601 cm2 Slabs |
| 269 | Extra for providing edge moulding to 16 - 18 mm thick marble stonecounters . vantities etc. Over item No. 7.1 & 7.2 including machines polishing to edge to give high gloss finish etc. Complete as per design approved by Engineer - in- charge. Granite Work |
| 270 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade,laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. Size 600 mm x 600 mm |
| 271 | 35mm thick Rough chiesel dressed stone flooring of approved shade set in pattern over 20mm thick base of cement mortar 1:6 ( 1 cement : 6 coarse sand) and jointed with cement sand mortar 1:3 complete in all respects: Nimbahera Stone |
| 272 | Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish:20mm thick |
| 273 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work including prepration of base with primer putty lippy complete in all respect. |
| 274 | Applying Birla /JK white cement based putty over cement plaster surface for making even surface |
| 275 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). |
| 276 | Providing and fixing T-iron frames for doors windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs, 10cm long embedded in cement concrete blocks 15x10x10cm of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screw or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 277 | Painting with enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 278 | Marble stone flooring table rubbed, 16 - 18 mm thick over 20 mm (Av.) thick base of CM 1:4( 1 Cement : 4 coarse sand) jointing with white cement mortar 1:2 ( 1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding rubbing and polishing complete. Green Marble Upto 800 cm2 tiles |
| 279 | Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 guage Thickness, joint mitred welded and grinded including hold fast of lugs 13mmx 3mm and 15cm long embedded in C.C. block 15x10x10cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of approved quality,windows shutters made out of 50x25mm hollow steel section 15 mm paitam of 18 guage thickness, joint mitred and grinded including 10mmx10mm square bras welded to frame for paitam fixing float glass 4 mm thick panes with glazzing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100mmlong, tower bolts 100mm long of steel powder coate superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respectas per direction of Engineer-in-charge. |
| 280 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not exceeding 150mm distance. |
| 281 | Providing and fixing square bars or other flat welded to window ventilatiors etc. |
| 282 | Renewing glass panes, with putty and nails wherever necessary : 5.5 mm thick plain glass panes |
| 283 | Grading for roof water proofing treatment with : Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) with water proofing compound as per manufacturs"s specification |
| 284 | Providing and fixing tiles overroof fixed in25mm thick in cement mortar 1:4 bed complete. 20 mm thick plain C.C. roofing tiles |
| 285 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finishing with cement mortar 1:3 as per standard design. |
| 286 | Part "B" Sanitary Work |
| 287 | P & F Indian type white glazed vitreous china Ist quality W.C.orissapan (I.S: 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor. Size 580 x 440 mm |
| 288 | P & F WVC wash basin (Ist quality, I.S.: 2556 Mark) of approved make with C.I. brackets duly painted 1 No 15 mm C.P. pillar cock (I.S. : 8934 Mark) & 32 mm C.P. brass wastecoupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.Size 550x400mm |
| 289 | P &F Kitchen & Lab. Sink of approved make with C.I. bracketsduly painted 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor. 1.0 mm thick Salem stainless steek AISI- 304 kitchen sink of approved make (Nirali, Neel Kanth, Jaina, Faber-castelll) with large waste coupling.Overall Sizes 22 x18 x 7 inches, Bowl sizes 20 x16 x 7 inches |
| 290 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). |
| 291 | 20mmNominal outer dia pipes |
| 292 | 32mmNominal outer dia pipes |
| 293 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: |
| 294 | C.P. Brass bib cock,15mm nominal bore. |
| 295 | C.P. Brass Long body, 15mm nominal bore weight not less than 690 gm |
| 296 | P & F Towel Rail or Ring of approved quality/ make:C.P. brass towel rail with brackets 450 x 20 mm |
| 297 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.400 gm,15mm. |
| 298 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked) |
| 299 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : |
| 300 | Gun-metal 20mm nominal bore. |
| 301 | Gun-metal 32mm nominal bore. |
| 302 | P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make : C P Brass concealed 25mm nominal bore. |
| 303 | P & F 15 mm. Dia Connection Pipe of approved quality/make : PVC pipe with C.P. Brass nuts upto length, 450mm |
| 304 | P & F Looking Mirrors with P.V.C. frame of approved (Atul Modi Guard Saint Gobin or equivalent)Size 500 x 400 mm |
| 305 | P & F PVC Storage Tank (IS : 12701 marked indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity |
| 306 | Hoisting charges for each floor |
| 307 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 110mm dia |
| 308 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality /make. |
| 309 | Bend 87.5 Dg. 110mm dia |
| 310 | Single Tee 110mm dia |
| 311 | Coupler110mm dia |
| 312 | Vent Cowel 100 mm |
| 313 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia |
| 314 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: |
| 315 | Coupler (socket) - 110 mm dia |
| 316 | Bend 87.5- 110 mm dia |
| 317 | Pipe clip - 110 mm dia |
| 318 | P & F Soap Dish or Tray of approved quality/make C.P. brass heavy and superior quality. |
| 319 | Structural steel work riveted or bolted in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level upto 4.5 mtr height. |
| 320 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI marked medium duty PVC conduit & it"s accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 A switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.G1 |
| 321 | Short point (up to 3 mtr.) |
| 322 | Medium point (up to 6 mtr.) |
| 323 | Long point(up to 10 mtr.) |
| 324 | Wiring of 3 pin 5 amp. light plug point with 1.5 sq. mmFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved makein surface / recessed ISI marked medium duty PVC conduit & it"s accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 Aswitch, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.G1 On board |
| 325 | Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175 x 100 x 60 mm. on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet, making connection , testing , etc. as required.G1 |
| 326 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required.G1 1x1.5sqmm |
| 327 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 328 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 329 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar, conforming to IS13032 & IS8623 including making internal DBterminations with copper lugs , testing etc. as required.G1 Double door (single phase) 12 Way |
| 330 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.GROUP 1 |
| 331 | Single pole MCB6 A to 32 A rating |
| 332 | Double pole MCB6 A to 32 A rating |
| 333 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required includingcutting the wall and making good the same as required.GROUP 1 |
| 334 | 20 mm |
| 335 | 25 mm |
| 336 | Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying3 to 4 mtr. below the ground level with 25mm dia. G.I. "B" class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C.finished chamber covered with hinged type with locking arrangement C.I. Cover,C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. |
| 337 | S & Laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 10 SWG copper. Wire |
| 338 | P & F of IP 20 LED tube light 20 watt with external batten made from CRCA sheet steel suitable to replace T-B/T-12 tube light, integral driver, 2000 luman + 5olo tolerarrce system luman efficiacy of 100 Lm/ watt minimum expected life time of 25000 burning hours, CCT 5700 I( ANSI, CRI 80, driver efficiency >850/o, Life expectancy of driver rnin 30000 hrs. PF 0,95 at full load/ 230 volt AC. |
| 339 | P & F double ball bearing capacitor start ceilingfan of approved make complete with regulator and other accessories as required. GROUP 1 1200 mm sweep |
| 340 | P & F IP-65 / IP-66 protected LED street light luminaire on existing bracket. Fixture made from powder coated single piece pressure die cast aluminium housing with UV stablized PC/Toughened glass cover (from 45W onwards) and should be secondary lens on each LED. The System level luminaire efficacy = 100 with high power LEDs of CREE/NICHIA/OSRAM/PHILPS/SEOUL make is to be used. The LED driver shall be BIS certified and input voltage AC 110 to 270 V AC with input voltagefrequency 50 Hz +3% Power factor 0.95 Driver eficiency 85%, THD () 10% Humidity 10% to 90% RH working temp. - 20C to 50C. Life expectancy equal or more than 50000 buring hrs. with minimuum 70% initial lumens maintained, Rendering index - 75% surge protection shall be min - 5 kv internal and min 10 KV external. Manufactures work mark/name engraved/embossed on die cast housing to allow traceability / authenticity till life of fixture. Fixtures shall be CE complianed. LED street Lifht fixture 30 Watt. |
| 341 | S & F of Street light bracket made out from following size of " B "class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required.32 mm dia |
| 342 | Repair Work of Roof, Flooring, Toilet at SHC Kalesriya, Block:- Deogarh, Dist. - Rajsamand |
| 343 | Dismantling roofs with care including stacking of serviceable material and disposal of unserviceable material within 50 mtr lead for : Lime Terrace |
| 344 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mtr lead |
| 345 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead. Of area 3 square meter and below |
| 346 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in lead of 50 mtr. All kinds of soil. |
| 347 | Providing and laying in position cement concrete including curing compaction etc . Completein specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 348 | Random rubble stone masonary for foundation and plinth in cement sand mortar above 30 cm thick wall in: Cement mortar 1:6( 1 Cement : 6 Sand ) |
| 349 | Random Rubble stone masonary for superstructure above plinth level one storey height above 30 cm. thick walls in : Cement mortar 1:6 ( 1 Cement : 6 Sand ) |
| 350 | Pointingonstonemasonryincementsandmortar 1:3 (1 cement : 3 sand) : Flush or ruled pointing. |
| 351 | Finishing wall with water proofing cement paint of approved brand and manufacture and or required shadetogive an even shade including all scaffolding: New Work (Three or more coats). |
| 352 | Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish:20mm thick |
| 353 | Providing and fixing precast cement concrete coping 1:2:4 mix 50 mm thick complete as per specification: |
| 354 | Painting with enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 355 | Grading for roof water proofing treatment with : Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) with water proofing compound as per manufacturs"s specification |
| 356 | Providing and fixing tiles overroof fixed in25mm thick in cement mortar 1:4 bed complete. 20 mm thick plain C.C. roofing tiles |
| 357 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finishing with cement mortar 1:3 as per standard design. |
| 358 | Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 guage Thickness, joint mitred welded and grinded including hold fast of lugs 13mmx 3mm and 15cm long embedded in C.C. block 15x10x10cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of approved quality,windows shutters made out of 50x25mm hollow steel section 15 mm paitam of 18 guage thickness, joint mitred and grinded including 10mmx10mm square bras welded to frame for paitam fixing float glass 4 mm thick panes with glazzing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100mmlong, tower bolts 100mm long of steel powder coate superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respectas per direction of Engineer-in-charge. |
| 359 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not exceeding 150mm distance. |
| 360 | Providing and fixing square bars or other flat welded to window ventilatiors etc. |
| 361 | Applying Birla /JK white cement based putty over cement plaster surface for making even surface |
| 362 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work including prepration of base with primer putty lippy complete in all respect. |
| 363 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). |
| 364 | Renewing glass panes, with putty and nails wherever necessary : 5.5 mm thick plain glass panes |
| 365 | Providing and fixing Ist quality MAT finished ceremic tiles size 300 x 300 mm confirming to IS: 13755 & IS: 15622 colour such as white, grey, Ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4). |
| 366 | Providing and fixing Ist quality standard White/ ivory,grey, fuma red brown, light green, light blue and other light shades Glazed Tiles of (confirming to IS : 13753 & IS 13622) of size 300 mm x 200 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls & pillars ). |
| 367 | Part "B" Sanitary Work |
| 368 | P & F Indian type white glazed vitreous china Ist quality W.C.orissapan (I.S: 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor. Size 580 x 440 mm |
| 369 | P & F WVC wash basin (Ist quality, I.S.: 2556 Mark) of approved make with C.I. brackets duly painted 1 No 15 mm C.P. pillar cock (I.S. : 8934 Mark) & 32 mm C.P. brass wastecoupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.Size 550x400mm |
| 370 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). |
| 371 | 20mmNominal outer dia pipes |
| 372 | 32mmNominal outer dia pipes |
| 373 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: |
| 374 | C.P. Brass bib cock,15mm nominal bore. |
| 375 | C.P. Brass Long body, 15mm nominal bore weight not less than 690 gm |
| 376 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.400 gm,15mm. |
| 377 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked) |
| 378 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : |
| 379 | Gun-metal 20mm nominal bore. |
| 380 | Gun-metal 32mm nominal bore. |
| 381 | P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make : C P Brass concealed 25mm nominal bore. |
| 382 | P & F 15 mm. Dia Connection Pipe of approved quality/make : PVC pipe with C.P. Brass nuts upto length, 450mm |
| 383 | P & F PVC Storage Tank (IS : 12701 marked indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity |
| 384 | Hoisting charges for each floor |
| 385 | Providing and fixing steel gate grating and grills made of angles, tees, square bars orflats black pipe with holdfast and fittings complete as per deign and drawing including cutting welding and fabrication with priming coat of red oxide. |
| 386 | Structural steel work riveted or bolted in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level upto 4.5 mtr height. |
| 387 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI marked medium duty PVC conduit & it"s accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 A switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.G1 |
| 388 | Short point (up to 3 mtr.) |
| 389 | Medium point (up to 6 mtr.) |
| 390 | Long point(up to 10 mtr.) |
| 391 | Wiring of 3 pin 5 amp. light plug point with 1.5 sq. mmFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved makein surface / recessed ISI marked medium duty PVC conduit & it"s accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 Aswitch, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.G1 On board |
| 392 | Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175 x 100 x 60 mm. on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet, making connection , testing , etc. as required.G1 |
| 393 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required.G1 1x1.5sqmm |
| 394 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 395 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 396 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar, conforming to IS13032 & IS8623 including making internal DBterminations with copper lugs , testing etc. as required.G1 Double door (single phase) 12 Way |
| 397 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.GROUP 1 |
| 398 | Single pole MCB6 A to 32 A rating |
| 399 | Double pole MCB6 A to 32 A rating |
| 400 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required includingcutting the wall and making good the same as required.GROUP 1 |
| 401 | 20 mm |
| 402 | 25 mm |
| 403 | Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying3 to 4 mtr. below the ground level with 25mm dia. G.I. "B" class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C.finished chamber covered with hinged type with locking arrangement C.I. Cover,C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. |
| 404 | S & Laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 10 SWG copper. Wire |
| 405 | P & F of IP 20 LED tube light 20 watt with external batten made from CRCA sheet steel suitable to replace T-B/T-12 tube light, integral driver, 2000 luman + 5olo tolerarrce system luman efficiacy of 100 Lm/ watt minimum expected life time of 25000 burning hours, CCT 5700 I( ANSI, CRI 80, driver efficiency >850/o, Life expectancy of driver rnin 30000 hrs. PF 0,95 at full load/ 230 volt AC. |
| 406 | P & F double ball bearing capacitor start ceilingfan of approved make complete with regulator and other accessories as required. GROUP 1 1200 mm sweep |
| 407 | P & F IP-65 / IP-66 protected LED street light luminaire on existing bracket. Fixture made from powder coated single piece pressure die cast aluminium housing with UV stablized PC/Toughened glass cover (from 45W onwards) and should be secondary lens on each LED. The System level luminaire efficacy = 100 with high power LEDs of CREE/NICHIA/OSRAM/PHILPS/SEOUL make is to be used. The LED driver shall be BIS certified and input voltage AC 110 to 270 V AC with input voltagefrequency 50 Hz +3% Power factor 0.95 Driver eficiency 85%, THD () 10% Humidity 10% to 90% RH working temp. - 20C to 50C. Life expectancy equal or more than 50000 buring hrs. with minimuum 70% initial lumens maintained, Rendering index - 75% surge protection shall be min - 5 kv internal and min 10 KV external. Manufactures work mark/name engraved/embossed on die cast housing to allow traceability / authenticity till life of fixture. Fixtures shall be CE complianed. LED street Lifht fixture 30 Watt. |
| 408 | S & F of Street light bracket made out from following size of " B "class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required.32 mm dia |
| 409 | Repair Work of Roof, Flooring, Toilet at PHC Kundwa, Block:- Deogarh, Dist. - Rajsamand |
| 410 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mtr lead |
| 411 | Dismantling of flooring with care including stacking of serveciable material and disposal of unserviceable material with in 50 mtr lead for: Cement Concrete Flooring |
| 412 | Dismantling roofs with care including stacking of serviceable material and disposal of unserviceable material within 50 mtr lead for : Lime Terrace |
| 413 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead. Of area 3 square meter and below |
| 414 | Providing and laying in position cement concrete including curing compaction etc . Completein specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 415 | Half brick masonry in superstructure up to third storey including cost of nominal hoopreinforcement ( 2 Nos. 6 mm dia M.S. bar at every forth course ) using bricks of designation 75Cement mortar 1:4 ( 1 cement : 4 coarse sand ) |
| 416 | Providing and fixing Ist quality standard White/ ivory,grey, fuma red brown, light green, light blue and other light shades Glazed Tiles of (confirming to IS : 13753 & IS 13622) of size 300 mm x 200 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls & pillars ). |
| 417 | Providing and fixing Ist quality MAT finished ceremic tiles size 300 x 300 mm confirming to IS: 13755 & IS: 15622 colour such as white, grey, Ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4). |
| 418 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure"A". 30 mm ThickCommercial Veneer both side |
| 419 | Add extra in flush doors :For external teak wood lipping on flush door 30 mm x 6 mm |
| 420 | Add extro for Sunmica 0.8 mm thick. |
| 421 | Providing and fixing Granite stone slab thickness 16 - 18 mm mirror polished and machine cut in walls, pillars, steps, shelves, counter, floors etc. laid on 12 mm (Av.) thick base of cement mortar 1:3(1 cement : 3 coarse sand) jointing with white cement mortar 1:2 ( 1 White cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of. Green/Black/Other granite . Above 3601 cm2 Slabs |
| 422 | Extra for providing edge moulding to 16 - 18 mm thick marble stonecounters . vantities etc. Over item No. 7.1 & 7.2 including machines polishing to edge to give high gloss finish etc. Complete as per design approved by Engineer - in- charge. Granite Work |
| 423 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade,laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. Size 600 mm x 600 mm |
| 424 | 35mm thick Rough chiesel dressed stone flooring of approved shade set in pattern over 20mm thick base of cement mortar 1:6 ( 1 cement : 6 coarse sand) and jointed with cement sand mortar 1:3 complete in all respects: Nimbahera Stone |
| 425 | Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish:20mm thick |
| 426 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work including prepration of base with primer putty lippy complete in all respect. |
| 427 | Applying Birla /JK white cement based putty over cement plaster surface for making even surface |
| 428 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). |
| 429 | Providing and fixing T-iron frames for doors windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs, 10cm long embedded in cement concrete blocks 15x10x10cm of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screw or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 430 | Painting with enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 431 | Marble stone flooring table rubbed, 16 - 18 mm thick over 20 mm (Av.) thick base of CM 1:4( 1 Cement : 4 coarse sand) jointing with white cement mortar 1:2 ( 1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding rubbing and polishing complete. Green Marble Upto 800 cm2 tiles |
| 432 | Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 guage Thickness, joint mitred welded and grinded including hold fast of lugs 13mmx 3mm and 15cm long embedded in C.C. block 15x10x10cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of approved quality,windows shutters made out of 50x25mm hollow steel section 15 mm paitam of 18 guage thickness, joint mitred and grinded including 10mmx10mm square bras welded to frame for paitam fixing float glass 4 mm thick panes with glazzing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100mmlong, tower bolts 100mm long of steel powder coate superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respectas per direction of Engineer-in-charge. |
| 433 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not exceeding 150mm distance. |
| 434 | Providing and fixing square bars or other flat welded to window ventilatiors etc. |
| 435 | Renewing glass panes, with putty and nails wherever necessary : 5.5 mm thick plain glass panes |
| 436 | Grading for roof water proofing treatment with : Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) with water proofing compound as per manufacturs"s specification |
| 437 | Providing and fixing tiles overroof fixed in25mm thick in cement mortar 1:4 bed complete. 20 mm thick plain C.C. roofing tiles |
| 438 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finishing with cement mortar 1:3 as per standard design. |
| 439 | Part "B" Sanitary Work |
| 440 | P & F Indian type white glazed vitreous china Ist quality W.C.orissapan (I.S: 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor. Size 580 x 440 mm |
| 441 | P & F WVC wash basin (Ist quality, I.S.: 2556 Mark) of approved make with C.I. brackets duly painted 1 No 15 mm C.P. pillar cock (I.S. : 8934 Mark) & 32 mm C.P. brass wastecoupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.Size 550x400mm |
| 442 | P &F Kitchen & Lab. Sink of approved make with C.I. bracketsduly painted 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor. 1.0 mm thick Salem stainless steek AISI- 304 kitchen sink of approved make (Nirali, Neel Kanth, Jaina, Faber-castelll) with large waste coupling.Overall Sizes 22 x18 x 7 inches, Bowl sizes 20 x16 x 7 inches |
| 443 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). |
| 444 | 20mmNominal outer dia pipes |
| 445 | 32mmNominal outer dia pipes |
| 446 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: |
| 447 | C.P. Brass bib cock,15mm nominal bore. |
| 448 | C.P. Brass Long body, 15mm nominal bore weight not less than 690 gm |
| 449 | P & F Towel Rail or Ring of approved quality/ make:C.P. brass towel rail with brackets 450 x 20 mm |
| 450 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.400 gm,15mm. |
| 451 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked) |
| 452 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : |
| 453 | Gun-metal 20mm nominal bore. |
| 454 | Gun-metal 32mm nominal bore. |
| 455 | P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make : C P Brass concealed 25mm nominal bore. |
| 456 | P & F 15 mm. Dia Connection Pipe of approved quality/make : PVC pipe with C.P. Brass nuts upto length, 450mm |
| 457 | P & F Looking Mirrors with P.V.C. frame of approved (Atul Modi Guard Saint Gobin or equivalent)Size 500 x 400 mm |
| 458 | P & F PVC Storage Tank (IS : 12701 marked indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity |
| 459 | Hoisting charges for each floor |
| 460 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 110mm dia |
| 461 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality /make. |
| 462 | Bend 87.5 Dg. 110mm dia |
| 463 | Single Tee 110mm dia |
| 464 | Coupler110mm dia |
| 465 | Vent Cowel 100 mm |
| 466 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia |
| 467 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: |
| 468 | Coupler (socket) - 110 mm dia |
| 469 | Bend 87.5- 110 mm dia |
| 470 | Pipe clip - 110 mm dia |
| 471 | P & F Soap Dish or Tray of approved quality/make C.P. brass heavy and superior quality. |
| 472 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI marked medium duty PVC conduit & it"s accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 A switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.G1 |
| 473 | Short point (up to 3 mtr.) |
| 474 | Medium point (up to 6 mtr.) |
| 475 | Long point(up to 10 mtr.) |
| 476 | Wiring of 3 pin 5 amp. light plug point with 1.5 sq. mmFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved makein surface / recessed ISI marked medium duty PVC conduit & it"s accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 Aswitch, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.G1 On board |
| 477 | Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175 x 100 x 60 mm. on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet, making connection , testing , etc. as required.G1 |
| 478 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required.G1 1x1.5sqmm |
| 479 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 480 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 481 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar, conforming to IS13032 & IS8623 including making internal DBterminations with copper lugs , testing etc. as required.G1 Double door (single phase) 12 Way |
| 482 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.GROUP 1 |
| 483 | Single pole MCB6 A to 32 A rating |
| 484 | Double pole MCB6 A to 32 A rating |
| 485 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required includingcutting the wall and making good the same as required.GROUP 1 |
| 486 | 20 mm |
| 487 | 25 mm |
| 488 | Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying3 to 4 mtr. below the ground level with 25mm dia. G.I. "B" class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C.finished chamber covered with hinged type with locking arrangement C.I. Cover,C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. |
| 489 | S & Laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 10 SWG copper. Wire |
| 490 | P & F of IP 20 LED tube light 20 watt with external batten made from CRCA sheet steel suitable to replace T-B/T-12 tube light, integral driver, 2000 luman + 5olo tolerarrce system luman efficiacy of 100 Lm/ watt minimum expected life time of 25000 burning hours, CCT 5700 I( ANSI, CRI 80, driver efficiency >850/o, Life expectancy of driver rnin 30000 hrs. PF 0,95 at full load/ 230 volt AC. |
| 491 | P & F double ball bearing capacitor start ceilingfan of approved make complete with regulator and other accessories as required. GROUP 1 1200 mm sweep |
| 492 | P & F IP-65 / IP-66 protected LED street light luminaire on existing bracket. Fixture made from powder coated single piece pressure die cast aluminium housing with UV stablized PC/Toughened glass cover (from 45W onwards) and should be secondary lens on each LED. The System level luminaire efficacy = 100 with high power LEDs of CREE/NICHIA/OSRAM/PHILPS/SEOUL make is to be used. The LED driver shall be BIS certified and input voltage AC 110 to 270 V AC with input voltagefrequency 50 Hz +3% Power factor 0.95 Driver eficiency 85%, THD () 10% Humidity 10% to 90% RH working temp. - 20C to 50C. Life expectancy equal or more than 50000 buring hrs. with minimuum 70% initial lumens maintained, Rendering index - 75% surge protection shall be min - 5 kv internal and min 10 KV external. Manufactures work mark/name engraved/embossed on die cast housing to allow traceability / authenticity till life of fixture. Fixtures shall be CE complianed. LED street Lifht fixture 30 Watt. |
| 493 | S & F of Street light bracket made out from following size of " B "class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required.32 mm dia |
| 494 | Repair Work of Roof, Flooring, Toilet at SHC Mad, Block:- Deogarh, Dist. - Rajsamand |
| 495 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mtr lead |
| 496 | Dismantling of flooring with care including stacking of serveciable material and disposal of unserviceable material with in 50 mtr lead for: Cement Concrete Flooring |
| 497 | Dismantling roofs with care including stacking of serviceable material and disposal of unserviceable material within 50 mtr lead for : Lime Terrace |
| 498 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead. Of area 3 square meter and below |
| 499 | Providing and laying in position cement concrete including curing compaction etc . Completein specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 500 | Half brick masonry in superstructure up to third storey including cost of nominal hoopreinforcement ( 2 Nos. 6 mm dia M.S. bar at every forth course ) using bricks of designation 75Cement mortar 1:4 ( 1 cement : 4 coarse sand ) |
| 501 | Providing and fixing Ist quality standard White/ ivory,grey, fuma red brown, light green, light blue and other light shades Glazed Tiles of (confirming to IS : 13753 & IS 13622) of size 300 mm x 200 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls & pillars ). |
| 502 | Providing and fixing Ist quality MAT finished ceremic tiles size 300 x 300 mm confirming to IS: 13755 & IS: 15622 colour such as white, grey, Ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4). |
| 503 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure"A". 30 mm ThickCommercial Veneer both side |
| 504 | Add extra in flush doors :For external teak wood lipping on flush door 30 mm x 6 mm |
| 505 | Add extro for Sunmica 0.8 mm thick. |
| 506 | Providing and fixing Granite stone slab thickness 16 - 18 mm mirror polished and machine cut in walls, pillars, steps, shelves, counter, floors etc. laid on 12 mm (Av.) thick base of cement mortar 1:3(1 cement : 3 coarse sand) jointing with white cement mortar 1:2 ( 1 White cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of. Green/Black/Other granite . Above 3601 cm2 Slabs |
| 507 | Extra for providing edge moulding to 16 - 18 mm thick marble stonecounters . vantities etc. Over item No. 7.1 & 7.2 including machines polishing to edge to give high gloss finish etc. Complete as per design approved by Engineer - in- charge. Granite Work |
| 508 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade,laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. Size 600 mm x 600 mm |
| 509 | 35mm thick Rough chiesel dressed stone flooring of approved shade set in pattern over 20mm thick base of cement mortar 1:6 ( 1 cement : 6 coarse sand) and jointed with cement sand mortar 1:3 complete in all respects: Nimbahera Stone |
| 510 | Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish:20mm thick |
| 511 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work including prepration of base with primer putty lippy complete in all respect. |
| 512 | Applying Birla /JK white cement based putty over cement plaster surface for making even surface |
| 513 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). |
| 514 | Providing and fixing T-iron frames for doors windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs, 10cm long embedded in cement concrete blocks 15x10x10cm of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screw or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 515 | Painting with enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 516 | Marble stone flooring table rubbed, 16 - 18 mm thick over 20 mm (Av.) thick base of CM 1:4( 1 Cement : 4 coarse sand) jointing with white cement mortar 1:2 ( 1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding rubbing and polishing complete. Green Marble Upto 800 cm2 tiles |
| 517 | Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 guage Thickness, joint mitred welded and grinded including hold fast of lugs 13mmx 3mm and 15cm long embedded in C.C. block 15x10x10cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of approved quality,windows shutters made out of 50x25mm hollow steel section 15 mm paitam of 18 guage thickness, joint mitred and grinded including 10mmx10mm square bras welded to frame for paitam fixing float glass 4 mm thick panes with glazzing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100mmlong, tower bolts 100mm long of steel powder coate superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respectas per direction of Engineer-in-charge. |
| 518 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not exceeding 150mm distance. |
| 519 | Providing and fixing square bars or other flat welded to window ventilatiors etc. |
| 520 | Renewing glass panes, with putty and nails wherever necessary : 5.5 mm thick plain glass panes |
| 521 | Grading for roof water proofing treatment with : Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) with water proofing compound as per manufacturs"s specification |
| 522 | Providing and fixing tiles overroof fixed in25mm thick in cement mortar 1:4 bed complete. 20 mm thick plain C.C. roofing tiles |
| 523 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finishing with cement mortar 1:3 as per standard design. |
| 524 | Part "B" Sanitary Work |
| 525 | P & F Indian type white glazed vitreous china Ist quality W.C.orissapan (I.S: 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor. Size 580 x 440 mm |
| 526 | P & F WVC wash basin (Ist quality, I.S.: 2556 Mark) of approved make with C.I. brackets duly painted 1 No 15 mm C.P. pillar cock (I.S. : 8934 Mark) & 32 mm C.P. brass wastecoupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.Size 550x400mm |
| 527 | P &F Kitchen & Lab. Sink of approved make with C.I. bracketsduly painted 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor. 1.0 mm thick Salem stainless steek AISI- 304 kitchen sink of approved make (Nirali, Neel Kanth, Jaina, Faber-castelll) with large waste coupling.Overall Sizes 22 x18 x 7 inches, Bowl sizes 20 x16 x 7 inches |
| 528 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). |
| 529 | 20mmNominal outer dia pipes |
| 530 | 32mmNominal outer dia pipes |
| 531 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: |
| 532 | C.P. Brass bib cock,15mm nominal bore. |
| 533 | C.P. Brass Long body, 15mm nominal bore weight not less than 690 gm |
| 534 | P & F Towel Rail or Ring of approved quality/ make:C.P. brass towel rail with brackets 450 x 20 mm |
| 535 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.400 gm,15mm. |
| 536 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked) |
| 537 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : |
| 538 | Gun-metal 20mm nominal bore. |
| 539 | Gun-metal 32mm nominal bore. |
| 540 | P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make : C P Brass concealed 25mm nominal bore. |
| 541 | P & F 15 mm. Dia Connection Pipe of approved quality/make : PVC pipe with C.P. Brass nuts upto length, 450mm |
| 542 | P & F Looking Mirrors with P.V.C. frame of approved (Atul Modi Guard Saint Gobin or equivalent)Size 500 x 400 mm |
| 543 | P & F PVC Storage Tank (IS : 12701 marked indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity |
| 544 | Hoisting charges for each floor |
| 545 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 110mm dia |
| 546 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality /make. |
| 547 | Bend 87.5 Dg. 110mm dia |
| 548 | Single Tee 110mm dia |
| 549 | Coupler110mm dia |
| 550 | Vent Cowel 100 mm |
| 551 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia |
| 552 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: |
| 553 | Coupler (socket) - 110 mm dia |
| 554 | Bend 87.5- 110 mm dia |
| 555 | Pipe clip - 110 mm dia |
| 556 | P & F Soap Dish or Tray of approved quality/make C.P. brass heavy and superior quality. |
| 557 | Structural steel work riveted or bolted in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level upto 4.5 mtr height. |
| 558 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI marked medium duty PVC conduit & it"s accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 A switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.G1 |
| 559 | Short point (up to 3 mtr.) |
| 560 | Medium point (up to 6 mtr.) |
| 561 | Long point(up to 10 mtr.) |
| 562 | Wiring of 3 pin 5 amp. light plug point with 1.5 sq. mmFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved makein surface / recessed ISI marked medium duty PVC conduit & it"s accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 Aswitch, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.G1 On board |
| 563 | Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175 x 100 x 60 mm. on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet, making connection , testing , etc. as required.G1 |
| 564 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required.G1 1x1.5sqmm |
| 565 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 566 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 567 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar, conforming to IS13032 & IS8623 including making internal DBterminations with copper lugs , testing etc. as required.G1 Double door (single phase) 12 Way |
| 568 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.GROUP 1 |
| 569 | Single pole MCB6 A to 32 A rating |
| 570 | Double pole MCB6 A to 32 A rating |
| 571 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required includingcutting the wall and making good the same as required.GROUP 1 |
| 572 | 20 mm |
| 573 | 25 mm |
| 574 | Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying3 to 4 mtr. below the ground level with 25mm dia. G.I. "B" class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C.finished chamber covered with hinged type with locking arrangement C.I. Cover,C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. |
| 575 | S & Laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 10 SWG copper. Wire |
| 576 | P & F of IP 20 LED tube light 20 watt with external batten made from CRCA sheet steel suitable to replace T-B/T-12 tube light, integral driver, 2000 luman + 5olo tolerarrce system luman efficiacy of 100 Lm/ watt minimum expected life time of 25000 burning hours, CCT 5700 I( ANSI, CRI 80, driver efficiency >850/o, Life expectancy of driver rnin 30000 hrs. PF 0,95 at full load/ 230 volt AC. |
| 577 | P & F double ball bearing capacitor start ceilingfan of approved make complete with regulator and other accessories as required. GROUP 1 1200 mm sweep |
| 578 | P & F IP-65 / IP-66 protected LED street light luminaire on existing bracket. Fixture made from powder coated single piece pressure die cast aluminium housing with UV stablized PC/Toughened glass cover (from 45W onwards) and should be secondary lens on each LED. The System level luminaire efficacy = 100 with high power LEDs of CREE/NICHIA/OSRAM/PHILPS/SEOUL make is to be used. The LED driver shall be BIS certified and input voltage AC 110 to 270 V AC with input voltagefrequency 50 Hz +3% Power factor 0.95 Driver eficiency 85%, THD () 10% Humidity 10% to 90% RH working temp. - 20C to 50C. Life expectancy equal or more than 50000 buring hrs. with minimuum 70% initial lumens maintained, Rendering index - 75% surge protection shall be min - 5 kv internal and min 10 KV external. Manufactures work mark/name engraved/embossed on die cast housing to allow traceability / authenticity till life of fixture. Fixtures shall be CE complianed. LED street Lifht fixture 30 Watt. |
| 579 | S & F of Street light bracket made out from following size of " B "class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required.32 mm dia |
| 580 | Repair Work of Roof, Flooring, Toilet at SHC Madda Ki Bassi, Block:- Deogarh, Dist. - Rajsamand |
| 581 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mtr lead |
| 582 | Dismantling of flooring with care including stacking of serveciable material and disposal of unserviceable material with in 50 mtr lead for: Cement Concrete Flooring |
| 583 | Dismantling roofs with care including stacking of serviceable material and disposal of unserviceable material within 50 mtr lead for : Lime Terrace |
| 584 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead. Of area 3 square meter and below |
| 585 | Providing and laying in position cement concrete including curing compaction etc . Completein specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 586 | Half brick masonry in superstructure up to third storey including cost of nominal hoopreinforcement ( 2 Nos. 6 mm dia M.S. bar at every forth course ) using bricks of designation 75Cement mortar 1:4 ( 1 cement : 4 coarse sand ) |
| 587 | Providing and fixing Ist quality standard White/ ivory,grey, fuma red brown, light green, light blue and other light shades Glazed Tiles of (confirming to IS : 13753 & IS 13622) of size 300 mm x 200 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls & pillars ). |
| 588 | Providing and fixing Ist quality MAT finished ceremic tiles size 300 x 300 mm confirming to IS: 13755 & IS: 15622 colour such as white, grey, Ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4). |
| 589 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure"A". 30 mm ThickCommercial Veneer both side |
| 590 | Add extra in flush doors :For external teak wood lipping on flush door 30 mm x 6 mm |
| 591 | Add extro for Sunmica 0.8 mm thick. |
| 592 | Providing and fixing Granite stone slab thickness 16 - 18 mm mirror polished and machine cut in walls, pillars, steps, shelves, counter, floors etc. laid on 12 mm (Av.) thick base of cement mortar 1:3(1 cement : 3 coarse sand) jointing with white cement mortar 1:2 ( 1 White cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of. Green/Black/Other granite . Above 3601 cm2 Slabs |
| 593 | Extra for providing edge moulding to 16 - 18 mm thick marble stonecounters . vantities etc. Over item No. 7.1 & 7.2 including machines polishing to edge to give high gloss finish etc. Complete as per design approved by Engineer - in- charge. Granite Work |
| 594 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade,laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. Size 600 mm x 600 mm |
| 595 | 35mm thick Rough chiesel dressed stone flooring of approved shade set in pattern over 20mm thick base of cement mortar 1:6 ( 1 cement : 6 coarse sand) and jointed with cement sand mortar 1:3 complete in all respects: Nimbahera Stone |
| 596 | Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish:20mm thick |
| 597 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work including prepration of base with primer putty lippy complete in all respect. |
| 598 | Applying Birla /JK white cement based putty over cement plaster surface for making even surface |
| 599 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). |
| 600 | Providing and fixing T-iron frames for doors windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs, 10cm long embedded in cement concrete blocks 15x10x10cm of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screw or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 601 | Painting with enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 602 | Marble stone flooring table rubbed, 16 - 18 mm thick over 20 mm (Av.) thick base of CM 1:4( 1 Cement : 4 coarse sand) jointing with white cement mortar 1:2 ( 1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding rubbing and polishing complete. Green Marble Upto 800 cm2 tiles |
| 603 | Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 guage Thickness, joint mitred welded and grinded including hold fast of lugs 13mmx 3mm and 15cm long embedded in C.C. block 15x10x10cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of approved quality,windows shutters made out of 50x25mm hollow steel section 15 mm paitam of 18 guage thickness, joint mitred and grinded including 10mmx10mm square bras welded to frame for paitam fixing float glass 4 mm thick panes with glazzing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100mmlong, tower bolts 100mm long of steel powder coate superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respectas per direction of Engineer-in-charge. |
| 604 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not exceeding 150mm distance. |
| 605 | Providing and fixing square bars or other flat welded to window ventilatiors etc. |
| 606 | Renewing glass panes, with putty and nails wherever necessary : 5.5 mm thick plain glass panes |
| 607 | Grading for roof water proofing treatment with : Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) with water proofing compound as per manufacturs"s specification |
| 608 | Providing and fixing tiles overroof fixed in25mm thick in cement mortar 1:4 bed complete. 20 mm thick plain C.C. roofing tiles |
| 609 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finishing with cement mortar 1:3 as per standard design. |
| 610 | Part "B" Sanitary Work |
| 611 | P & F Indian type white glazed vitreous china Ist quality W.C.orissapan (I.S: 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor. Size 580 x 440 mm |
| 612 | P & F WVC wash basin (Ist quality, I.S.: 2556 Mark) of approved make with C.I. brackets duly painted 1 No 15 mm C.P. pillar cock (I.S. : 8934 Mark) & 32 mm C.P. brass wastecoupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.Size 550x400mm |
| 613 | P &F Kitchen & Lab. Sink of approved make with C.I. bracketsduly painted 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor. 1.0 mm thick Salem stainless steek AISI- 304 kitchen sink of approved make (Nirali, Neel Kanth, Jaina, Faber-castelll) with large waste coupling.Overall Sizes 22 x18 x 7 inches, Bowl sizes 20 x16 x 7 inches |
| 614 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). |
| 615 | 20mmNominal outer dia pipes |
| 616 | 32mmNominal outer dia pipes |
| 617 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: |
| 618 | C.P. Brass bib cock,15mm nominal bore. |
| 619 | C.P. Brass Long body, 15mm nominal bore weight not less than 690 gm |
| 620 | P & F Towel Rail or Ring of approved quality/ make:C.P. brass towel rail with brackets 450 x 20 mm |
| 621 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.400 gm,15mm. |
| 622 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked) |
| 623 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : |
| 624 | Gun-metal 20mm nominal bore. |
| 625 | Gun-metal 32mm nominal bore. |
| 626 | P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make : C P Brass concealed 25mm nominal bore. |
| 627 | P & F 15 mm. Dia Connection Pipe of approved quality/make : PVC pipe with C.P. Brass nuts upto length, 450mm |
| 628 | P & F Looking Mirrors with P.V.C. frame of approved (Atul Modi Guard Saint Gobin or equivalent)Size 500 x 400 mm |
| 629 | P & F PVC Storage Tank (IS : 12701 marked indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity |
| 630 | Hoisting charges for each floor |
| 631 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 110mm dia |
| 632 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality /make. |
| 633 | Bend 87.5 Dg. 110mm dia |
| 634 | Single Tee 110mm dia |
| 635 | Coupler110mm dia |
| 636 | Vent Cowel 100 mm |
| 637 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia |
| 638 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: |
| 639 | Coupler (socket) - 110 mm dia |
| 640 | Bend 87.5- 110 mm dia |
| 641 | Pipe clip - 110 mm dia |
| 642 | P & F Soap Dish or Tray of approved quality/make C.P. brass heavy and superior quality. |
| 643 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI marked medium duty PVC conduit & it"s accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 A switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.G1 |
| 644 | Short point (up to 3 mtr.) |
| 645 | Medium point (up to 6 mtr.) |
| 646 | Long point(up to 10 mtr.) |
| 647 | Wiring of 3 pin 5 amp. light plug point with 1.5 sq. mmFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved makein surface / recessed ISI marked medium duty PVC conduit & it"s accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 Aswitch, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.G1 On board |
| 648 | Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175 x 100 x 60 mm. on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet, making connection , testing , etc. as required.G1 |
| 649 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required.G1 1x1.5sqmm |
| 650 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 651 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 652 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar, conforming to IS13032 & IS8623 including making internal DBterminations with copper lugs , testing etc. as required.G1 Double door (single phase) 12 Way |
| 653 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.GROUP 1 |
| 654 | Single pole MCB6 A to 32 A rating |
| 655 | Double pole MCB6 A to 32 A rating |
| 656 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required includingcutting the wall and making good the same as required.GROUP 1 |
| 657 | 20 mm |
| 658 | 25 mm |
| 659 | Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying3 to 4 mtr. below the ground level with 25mm dia. G.I. "B" class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C.finished chamber covered with hinged type with locking arrangement C.I. Cover,C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. |
| 660 | S & Laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 10 SWG copper. Wire |
| 661 | P & F of IP 20 LED tube light 20 watt with external batten made from CRCA sheet steel suitable to replace T-B/T-12 tube light, integral driver, 2000 luman + 5olo tolerarrce system luman efficiacy of 100 Lm/ watt minimum expected life time of 25000 burning hours, CCT 5700 I( ANSI, CRI 80, driver efficiency >850/o, Life expectancy of driver rnin 30000 hrs. PF 0,95 at full load/ 230 volt AC. |
| 662 | P & F double ball bearing capacitor start ceilingfan of approved make complete with regulator and other accessories as required. GROUP 1 1200 mm sweep |
| 663 | P & F IP-65 / IP-66 protected LED street light luminaire on existing bracket. Fixture made from powder coated single piece pressure die cast aluminium housing with UV stablized PC/Toughened glass cover (from 45W onwards) and should be secondary lens on each LED. The System level luminaire efficacy = 100 with high power LEDs of CREE/NICHIA/OSRAM/PHILPS/SEOUL make is to be used. The LED driver shall be BIS certified and input voltage AC 110 to 270 V AC with input voltagefrequency 50 Hz +3% Power factor 0.95 Driver eficiency 85%, THD () 10% Humidity 10% to 90% RH working temp. - 20C to 50C. Life expectancy equal or more than 50000 buring hrs. with minimuum 70% initial lumens maintained, Rendering index - 75% surge protection shall be min - 5 kv internal and min 10 KV external. Manufactures work mark/name engraved/embossed on die cast housing to allow traceability / authenticity till life of fixture. Fixtures shall be CE complianed. LED street Lifht fixture 30 Watt. |
| 664 | S & F of Street light bracket made out from following size of " B "class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required.32 mm dia |
| 665 | Repair Work of Roof, Flooring, Toilet at SHC Narana, Block:- Deogarh, Dist. - Rajsamand |
| 666 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mtr lead |
| 667 | Dismantling of flooring with care including stacking of serveciable material and disposal of unserviceable material with in 50 mtr lead for: Cement Concrete Flooring |
| 668 | Dismantling roofs with care including stacking of serviceable material and disposal of unserviceable material within 50 mtr lead for : Lime Terrace |
| 669 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead. Of area 3 square meter and below |
| 670 | Providing and laying in position cement concrete including curing compaction etc . Completein specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 671 | Half brick masonry in superstructure up to third storey including cost of nominal hoopreinforcement ( 2 Nos. 6 mm dia M.S. bar at every forth course ) using bricks of designation 75Cement mortar 1:4 ( 1 cement : 4 coarse sand ) |
| 672 | Providing and fixing Ist quality standard White/ ivory,grey, fuma red brown, light green, light blue and other light shades Glazed Tiles of (confirming to IS : 13753 & IS 13622) of size 300 mm x 200 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls & pillars ). |
| 673 | Providing and fixing Ist quality MAT finished ceremic tiles size 300 x 300 mm confirming to IS: 13755 & IS: 15622 colour such as white, grey, Ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4). |
| 674 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure"A". 30 mm ThickCommercial Veneer both side |
| 675 | Add extra in flush doors :For external teak wood lipping on flush door 30 mm x 6 mm |
| 676 | Add extro for Sunmica 0.8 mm thick. |
| 677 | Providing and fixing Granite stone slab thickness 16 - 18 mm mirror polished and machine cut in walls, pillars, steps, shelves, counter, floors etc. laid on 12 mm (Av.) thick base of cement mortar 1:3(1 cement : 3 coarse sand) jointing with white cement mortar 1:2 ( 1 White cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of. Green/Black/Other granite . Above 3601 cm2 Slabs |
| 678 | Extra for providing edge moulding to 16 - 18 mm thick marble stonecounters . vantities etc. Over item No. 7.1 & 7.2 including machines polishing to edge to give high gloss finish etc. Complete as per design approved by Engineer - in- charge. Granite Work |
| 679 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade,laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. Size 600 mm x 600 mm |
| 680 | 35mm thick Rough chiesel dressed stone flooring of approved shade set in pattern over 20mm thick base of cement mortar 1:6 ( 1 cement : 6 coarse sand) and jointed with cement sand mortar 1:3 complete in all respects: Nimbahera Stone |
| 681 | Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish:20mm thick |
| 682 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work including prepration of base with primer putty lippy complete in all respect. |
| 683 | Applying Birla /JK white cement based putty over cement plaster surface for making even surface |
| 684 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). |
| 685 | Providing and fixing T-iron frames for doors windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs, 10cm long embedded in cement concrete blocks 15x10x10cm of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screw or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 686 | Painting with enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 687 | Marble stone flooring table rubbed, 16 - 18 mm thick over 20 mm (Av.) thick base of CM 1:4( 1 Cement : 4 coarse sand) jointing with white cement mortar 1:2 ( 1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding rubbing and polishing complete. Green Marble Upto 800 cm2 tiles |
| 688 | Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 guage Thickness, joint mitred welded and grinded including hold fast of lugs 13mmx 3mm and 15cm long embedded in C.C. block 15x10x10cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of approved quality,windows shutters made out of 50x25mm hollow steel section 15 mm paitam of 18 guage thickness, joint mitred and grinded including 10mmx10mm square bras welded to frame for paitam fixing float glass 4 mm thick panes with glazzing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100mmlong, tower bolts 100mm long of steel powder coate superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respectas per direction of Engineer-in-charge. |
| 689 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not exceeding 150mm distance. |
| 690 | Providing and fixing square bars or other flat welded to window ventilatiors etc. |
| 691 | Renewing glass panes, with putty and nails wherever necessary : 5.5 mm thick plain glass panes |
| 692 | Grading for roof water proofing treatment with : Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) with water proofing compound as per manufacturs"s specification |
| 693 | Providing and fixing tiles overroof fixed in25mm thick in cement mortar 1:4 bed complete. 20 mm thick plain C.C. roofing tiles |
| 694 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finishing with cement mortar 1:3 as per standard design. |
| 695 | Providing and fixing cow catcher made of R.S. joist angles channels MS round including cutting welding and fabrication with priming coat of red oxide ( as per design). |
| 696 | Part "B" Sanitary Work |
| 697 | P & F Indian type white glazed vitreous china Ist quality W.C.orissapan (I.S: 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor. Size 580 x 440 mm |
| 698 | P & F WVC wash basin (Ist quality, I.S.: 2556 Mark) of approved make with C.I. brackets duly painted 1 No 15 mm C.P. pillar cock (I.S. : 8934 Mark) & 32 mm C.P. brass wastecoupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.Size 550x400mm |
| 699 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). |
| 700 | 20mmNominal outer dia pipes |
| 701 | 32mmNominal outer dia pipes |
| 702 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: |
| 703 | C.P. Brass bib cock,15mm nominal bore. |
| 704 | C.P. Brass Long body, 15mm nominal bore weight not less than 690 gm |
| 705 | P & F Towel Rail or Ring of approved quality/ make:C.P. brass towel rail with brackets 450 x 20 mm |
| 706 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.400 gm,15mm. |
| 707 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked) |
| 708 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : |
| 709 | Gun-metal 20mm nominal bore. |
| 710 | Gun-metal 32mm nominal bore. |
| 711 | P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make : C P Brass concealed 25mm nominal bore. |
| 712 | P & F 15 mm. Dia Connection Pipe of approved quality/make : PVC pipe with C.P. Brass nuts upto length, 450mm |
| 713 | P & F Looking Mirrors with P.V.C. frame of approved (Atul Modi Guard Saint Gobin or equivalent)Size 500 x 400 mm |
| 714 | P & F PVC Storage Tank (IS : 12701 marked indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity |
| 715 | Hoisting charges for each floor |
| 716 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 110mm dia |
| 717 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality /make. |
| 718 | Bend 87.5 Dg. 110mm dia |
| 719 | Single Tee 110mm dia |
| 720 | Coupler110mm dia |
| 721 | Vent Cowel 100 mm |
| 722 | Construction of Open Surface Drain with 112mm thick brick masonry in CM 1:4,110mm thick base concrete 1:5:10, 37mm thick M-15 grade C.C. flooring ,12mm 1:4 cement plaster on all exposed faces of walls including top surface excavation & disposal of earth complete as per approved design/drawing: |
| 723 | Structural steel work riveted or bolted in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level upto 4.5 mtr height. |
| 724 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI marked medium duty PVC conduit & it"s accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 A switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.G1 |
| 725 | Short point (up to 3 mtr.) |
| 726 | Medium point (up to 6 mtr.) |
| 727 | Long point(up to 10 mtr.) |
| 728 | Wiring of 3 pin 5 amp. light plug point with 1.5 sq. mmFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved makein surface / recessed ISI marked medium duty PVC conduit & it"s accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 Aswitch, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.G1 On board |
| 729 | Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175 x 100 x 60 mm. on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet, making connection , testing , etc. as required.G1 |
| 730 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required.G1 1x1.5sqmm |
| 731 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 732 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 733 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar, conforming to IS13032 & IS8623 including making internal DBterminations with copper lugs , testing etc. as required.G1 Double door (single phase) 12 Way |
| 734 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.GROUP 1 |
| 735 | Single pole MCB6 A to 32 A rating |
| 736 | Double pole MCB6 A to 32 A rating |
| 737 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required includingcutting the wall and making good the same as required.GROUP 1 |
| 738 | 20 mm |
| 739 | 25 mm |
| 740 | Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying3 to 4 mtr. below the ground level with 25mm dia. G.I. "B" class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C.finished chamber covered with hinged type with locking arrangement C.I. Cover,C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. |
| 741 | S & Laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 10 SWG copper. Wire |
| 742 | P & F of IP 20 LED tube light 20 watt with external batten made from CRCA sheet steel suitable to replace T-B/T-12 tube light, integral driver, 2000 luman + 5olo tolerarrce system luman efficiacy of 100 Lm/ watt minimum expected life time of 25000 burning hours, CCT 5700 I( ANSI, CRI 80, driver efficiency >850/o, Life expectancy of driver rnin 30000 hrs. PF 0,95 at full load/ 230 volt AC. |
| 743 | P & F double ball bearing capacitor start ceilingfan of approved make complete with regulator and other accessories as required. GROUP 1 1200 mm sweep |
| 744 | P & F IP-65 / IP-66 protected LED street light luminaire on existing bracket. Fixture made from powder coated single piece pressure die cast aluminium housing with UV stablized PC/Toughened glass cover (from 45W onwards) and should be secondary lens on each LED. The System level luminaire efficacy = 100 with high power LEDs of CREE/NICHIA/OSRAM/PHILPS/SEOUL make is to be used. The LED driver shall be BIS certified and input voltage AC 110 to 270 V AC with input voltagefrequency 50 Hz +3% Power factor 0.95 Driver eficiency 85%, THD () 10% Humidity 10% to 90% RH working temp. - 20C to 50C. Life expectancy equal or more than 50000 buring hrs. with minimuum 70% initial lumens maintained, Rendering index - 75% surge protection shall be min - 5 kv internal and min 10 KV external. Manufactures work mark/name engraved/embossed on die cast housing to allow traceability / authenticity till life of fixture. Fixtures shall be CE complianed. LED street Lifht fixture 30 Watt. |
| 745 | S & F of Street light bracket made out from following size of " B "class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required.32 mm dia |
| 746 | Repair Work of Roof, Flooring, Toilet at SHC Nardas Ka Gudda, Block:- Deogarh, Dist. - Rajsamand |
| 747 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mtr lead |
| 748 | Dismantling of flooring with care including stacking of serveciable material and disposal of unserviceable material with in 50 mtr lead for: Cement Concrete Flooring |
| 749 | Dismantling roofs with care including stacking of serviceable material and disposal of unserviceable material within 50 mtr lead for : Lime Terrace |
| 750 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead. Of area 3 square meter and below |
| 751 | Providing and laying in position cement concrete including curing compaction etc . Completein specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 752 | Half brick masonry in superstructure up to third storey including cost of nominal hoopreinforcement ( 2 Nos. 6 mm dia M.S. bar at every forth course ) using bricks of designation 75Cement mortar 1:4 ( 1 cement : 4 coarse sand ) |
| 753 | Providing and fixing Ist quality standard White/ ivory,grey, fuma red brown, light green, light blue and other light shades Glazed Tiles of (confirming to IS : 13753 & IS 13622) of size 300 mm x 200 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls & pillars ). |
| 754 | Providing and fixing Ist quality MAT finished ceremic tiles size 300 x 300 mm confirming to IS: 13755 & IS: 15622 colour such as white, grey, Ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4). |
| 755 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure"A". 30 mm ThickCommercial Veneer both side |
| 756 | Add extra in flush doors :For external teak wood lipping on flush door 30 mm x 6 mm |
| 757 | Add extro for Sunmica 0.8 mm thick. |
| 758 | Providing and fixing Granite stone slab thickness 16 - 18 mm mirror polished and machine cut in walls, pillars, steps, shelves, counter, floors etc. laid on 12 mm (Av.) thick base of cement mortar 1:3(1 cement : 3 coarse sand) jointing with white cement mortar 1:2 ( 1 White cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of. Green/Black/Other granite . Above 3601 cm2 Slabs |
| 759 | Extra for providing edge moulding to 16 - 18 mm thick marble stonecounters . vantities etc. Over item No. 7.1 & 7.2 including machines polishing to edge to give high gloss finish etc. Complete as per design approved by Engineer - in- charge. Granite Work |
| 760 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade,laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. Size 600 mm x 600 mm |
| 761 | 35mm thick Rough chiesel dressed stone flooring of approved shade set in pattern over 20mm thick base of cement mortar 1:6 ( 1 cement : 6 coarse sand) and jointed with cement sand mortar 1:3 complete in all respects: Nimbahera Stone |
| 762 | Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish:20mm thick |
| 763 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work including prepration of base with primer putty lippy complete in all respect. |
| 764 | Applying Birla /JK white cement based putty over cement plaster surface for making even surface |
| 765 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). |
| 766 | Providing and fixing T-iron frames for doors windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs, 10cm long embedded in cement concrete blocks 15x10x10cm of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screw or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 767 | Painting with enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 768 | Marble stone flooring table rubbed, 16 - 18 mm thick over 20 mm (Av.) thick base of CM 1:4( 1 Cement : 4 coarse sand) jointing with white cement mortar 1:2 ( 1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding rubbing and polishing complete. Green Marble Upto 800 cm2 tiles |
| 769 | Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 guage Thickness, joint mitred welded and grinded including hold fast of lugs 13mmx 3mm and 15cm long embedded in C.C. block 15x10x10cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of approved quality,windows shutters made out of 50x25mm hollow steel section 15 mm paitam of 18 guage thickness, joint mitred and grinded including 10mmx10mm square bras welded to frame for paitam fixing float glass 4 mm thick panes with glazzing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100mmlong, tower bolts 100mm long of steel powder coate superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respectas per direction of Engineer-in-charge. |
| 770 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not exceeding 150mm distance. |
| 771 | Providing and fixing square bars or other flat welded to window ventilatiors etc. |
| 772 | Renewing glass panes, with putty and nails wherever necessary : 5.5 mm thick plain glass panes |
| 773 | Grading for roof water proofing treatment with : Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) with water proofing compound as per manufacturs"s specification |
| 774 | Providing and fixing tiles overroof fixed in25mm thick in cement mortar 1:4 bed complete. 20 mm thick plain C.C. roofing tiles |
| 775 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finishing with cement mortar 1:3 as per standard design. |
| 776 | Part "B" Sanitary Work |
| 777 | P & F Indian type white glazed vitreous china Ist quality W.C.orissapan (I.S: 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor. Size 580 x 440 mm |
| 778 | P & F WVC wash basin (Ist quality, I.S.: 2556 Mark) of approved make with C.I. brackets duly painted 1 No 15 mm C.P. pillar cock (I.S. : 8934 Mark) & 32 mm C.P. brass wastecoupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.Size 550x400mm |
| 779 | P &F Kitchen & Lab. Sink of approved make with C.I. bracketsduly painted 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor. 1.0 mm thick Salem stainless steek AISI- 304 kitchen sink of approved make (Nirali, Neel Kanth, Jaina, Faber-castelll) with large waste coupling.Overall Sizes 22 x18 x 7 inches, Bowl sizes 20 x16 x 7 inches |
| 780 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). |
| 781 | 20mmNominal outer dia pipes |
| 782 | 32mmNominal outer dia pipes |
| 783 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: |
| 784 | C.P. Brass bib cock,15mm nominal bore. |
| 785 | C.P. Brass Long body, 15mm nominal bore weight not less than 690 gm |
| 786 | P & F Towel Rail or Ring of approved quality/ make:C.P. brass towel rail with brackets 450 x 20 mm |
| 787 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.400 gm,15mm. |
| 788 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked) |
| 789 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : |
| 790 | Gun-metal 20mm nominal bore. |
| 791 | Gun-metal 32mm nominal bore. |
| 792 | P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make : C P Brass concealed 25mm nominal bore. |
| 793 | P & F 15 mm. Dia Connection Pipe of approved quality/make : PVC pipe with C.P. Brass nuts upto length, 450mm |
| 794 | P & F Looking Mirrors with P.V.C. frame of approved (Atul Modi Guard Saint Gobin or equivalent)Size 500 x 400 mm |
| 795 | P & F PVC Storage Tank (IS : 12701 marked indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity |
| 796 | Hoisting charges for each floor |
| 797 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 110mm dia |
| 798 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality /make. |
| 799 | Bend 87.5 Dg. 110mm dia |
| 800 | Single Tee 110mm dia |
| 801 | Coupler110mm dia |
| 802 | Vent Cowel 100 mm |
| 803 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia |
| 804 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: |
| 805 | Coupler (socket) - 110 mm dia |
| 806 | Bend 87.5- 110 mm dia |
| 807 | Pipe clip - 110 mm dia |
| 808 | P & F Soap Dish or Tray of approved quality/make C.P. brass heavy and superior quality. |
| 809 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI marked medium duty PVC conduit & it"s accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 A switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.G1 |
| 810 | Short point (up to 3 mtr.) |
| 811 | Medium point (up to 6 mtr.) |
| 812 | Long point(up to 10 mtr.) |
| 813 | Wiring of 3 pin 5 amp. light plug point with 1.5 sq. mmFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved makein surface / recessed ISI marked medium duty PVC conduit & it"s accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 Aswitch, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.G1 On board |
| 814 | Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175 x 100 x 60 mm. on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet, making connection , testing , etc. as required.G1 |
| 815 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required.G1 1x1.5sqmm |
| 816 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 817 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 818 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar, conforming to IS13032 & IS8623 including making internal DBterminations with copper lugs , testing etc. as required.G1 Double door (single phase) 12 Way |
| 819 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.GROUP 1 |
| 820 | Single pole MCB6 A to 32 A rating |
| 821 | Double pole MCB6 A to 32 A rating |
| 822 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required includingcutting the wall and making good the same as required.GROUP 1 |
| 823 | 20 mm |
| 824 | 25 mm |
| 825 | Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying3 to 4 mtr. below the ground level with 25mm dia. G.I. "B" class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C.finished chamber covered with hinged type with locking arrangement C.I. Cover,C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. |
| 826 | S & Laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 10 SWG copper. Wire |
| 827 | P & F of IP 20 LED tube light 20 watt with external batten made from CRCA sheet steel suitable to replace T-B/T-12 tube light, integral driver, 2000 luman + 5olo tolerarrce system luman efficiacy of 100 Lm/ watt minimum expected life time of 25000 burning hours, CCT 5700 I( ANSI, CRI 80, driver efficiency >850/o, Life expectancy of driver rnin 30000 hrs. PF 0,95 at full load/ 230 volt AC. |
| 828 | P & F double ball bearing capacitor start ceilingfan of approved make complete with regulator and other accessories as required. GROUP 1 1200 mm sweep |
| 829 | P & F IP-65 / IP-66 protected LED street light luminaire on existing bracket. Fixture made from powder coated single piece pressure die cast aluminium housing with UV stablized PC/Toughened glass cover (from 45W onwards) and should be secondary lens on each LED. The System level luminaire efficacy = 100 with high power LEDs of CREE/NICHIA/OSRAM/PHILPS/SEOUL make is to be used. The LED driver shall be BIS certified and input voltage AC 110 to 270 V AC with input voltagefrequency 50 Hz +3% Power factor 0.95 Driver eficiency 85%, THD () 10% Humidity 10% to 90% RH working temp. - 20C to 50C. Life expectancy equal or more than 50000 buring hrs. with minimuum 70% initial lumens maintained, Rendering index - 75% surge protection shall be min - 5 kv internal and min 10 KV external. Manufactures work mark/name engraved/embossed on die cast housing to allow traceability / authenticity till life of fixture. Fixtures shall be CE complianed. LED street Lifht fixture 30 Watt. |
| 830 | S & F of Street light bracket made out from following size of " B "class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required.32 mm dia |
| 831 | Repair Work of Roof, Flooring, Toilet at SHC Pardi, Block:- Deogarh, Dist. - Rajsamand |
| 832 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mtr lead |
| 833 | Dismantling of flooring with care including stacking of serveciable material and disposal of unserviceable material with in 50 mtr lead for: Cement Concrete Flooring |
| 834 | Dismantling roofs with care including stacking of serviceable material and disposal of unserviceable material within 50 mtr lead for : Lime Terrace |
| 835 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead. Of area 3 square meter and below |
| 836 | Providing and laying in position cement concrete including curing compaction etc . Completein specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 837 | Half brick masonry in superstructure up to third storey including cost of nominal hoopreinforcement ( 2 Nos. 6 mm dia M.S. bar at every forth course ) using bricks of designation 75Cement mortar 1:4 ( 1 cement : 4 coarse sand ) |
| 838 | Providing and fixing Ist quality standard White/ ivory,grey, fuma red brown, light green, light blue and other light shades Glazed Tiles of (confirming to IS : 13753 & IS 13622) of size 300 mm x 200 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls & pillars ). |
| 839 | Providing and fixing Ist quality MAT finished ceremic tiles size 300 x 300 mm confirming to IS: 13755 & IS: 15622 colour such as white, grey, Ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4). |
| 840 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure"A". 30 mm ThickCommercial Veneer both side |
| 841 | Add extra in flush doors :For external teak wood lipping on flush door 30 mm x 6 mm |
| 842 | Add extro for Sunmica 0.8 mm thick. |
| 843 | Providing and fixing Granite stone slab thickness 16 - 18 mm mirror polished and machine cut in walls, pillars, steps, shelves, counter, floors etc. laid on 12 mm (Av.) thick base of cement mortar 1:3(1 cement : 3 coarse sand) jointing with white cement mortar 1:2 ( 1 White cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of. Green/Black/Other granite . Above 3601 cm2 Slabs |
| 844 | Extra for providing edge moulding to 16 - 18 mm thick marble stonecounters . vantities etc. Over item No. 7.1 & 7.2 including machines polishing to edge to give high gloss finish etc. Complete as per design approved by Engineer - in- charge. Granite Work |
| 845 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade,laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. Size 600 mm x 600 mm |
| 846 | 35mm thick Rough chiesel dressed stone flooring of approved shade set in pattern over 20mm thick base of cement mortar 1:6 ( 1 cement : 6 coarse sand) and jointed with cement sand mortar 1:3 complete in all respects: Nimbahera Stone |
| 847 | Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish:20mm thick |
| 848 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work including prepration of base with primer putty lippy complete in all respect. |
| 849 | Applying Birla /JK white cement based putty over cement plaster surface for making even surface |
| 850 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). |
| 851 | Providing and fixing T-iron frames for doors windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs, 10cm long embedded in cement concrete blocks 15x10x10cm of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screw or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 852 | Painting with enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 853 | Marble stone flooring table rubbed, 16 - 18 mm thick over 20 mm (Av.) thick base of CM 1:4( 1 Cement : 4 coarse sand) jointing with white cement mortar 1:2 ( 1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding rubbing and polishing complete. Green Marble Upto 800 cm2 tiles |
| 854 | Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 guage Thickness, joint mitred welded and grinded including hold fast of lugs 13mmx 3mm and 15cm long embedded in C.C. block 15x10x10cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of approved quality,windows shutters made out of 50x25mm hollow steel section 15 mm paitam of 18 guage thickness, joint mitred and grinded including 10mmx10mm square bras welded to frame for paitam fixing float glass 4 mm thick panes with glazzing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100mmlong, tower bolts 100mm long of steel powder coate superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respectas per direction of Engineer-in-charge. |
| 855 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not exceeding 150mm distance. |
| 856 | Providing and fixing square bars or other flat welded to window ventilatiors etc. |
| 857 | Renewing glass panes, with putty and nails wherever necessary : 5.5 mm thick plain glass panes |
| 858 | Grading for roof water proofing treatment with : Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) with water proofing compound as per manufacturs"s specification |
| 859 | Providing and fixing tiles overroof fixed in25mm thick in cement mortar 1:4 bed complete. 20 mm thick plain C.C. roofing tiles |
| 860 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finishing with cement mortar 1:3 as per standard design. |
| 861 | Part "B" Sanitary Work |
| 862 | P & F Indian type white glazed vitreous china Ist quality W.C.orissapan (I.S: 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor. Size 580 x 440 mm |
| 863 | P & F WVC wash basin (Ist quality, I.S.: 2556 Mark) of approved make with C.I. brackets duly painted 1 No 15 mm C.P. pillar cock (I.S. : 8934 Mark) & 32 mm C.P. brass wastecoupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.Size 550x400mm |
| 864 | P &F Kitchen & Lab. Sink of approved make with C.I. bracketsduly painted 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor. 1.0 mm thick Salem stainless steek AISI- 304 kitchen sink of approved make (Nirali, Neel Kanth, Jaina, Faber-castelll) with large waste coupling.Overall Sizes 22 x18 x 7 inches, Bowl sizes 20 x16 x 7 inches |
| 865 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). |
| 866 | 20mmNominal outer dia pipes |
| 867 | 32mmNominal outer dia pipes |
| 868 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: |
| 869 | C.P. Brass bib cock,15mm nominal bore. |
| 870 | C.P. Brass Long body, 15mm nominal bore weight not less than 690 gm |
| 871 | P & F Towel Rail or Ring of approved quality/ make:C.P. brass towel rail with brackets 450 x 20 mm |
| 872 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.400 gm,15mm. |
| 873 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked) |
| 874 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : |
| 875 | Gun-metal 20mm nominal bore. |
| 876 | Gun-metal 32mm nominal bore. |
| 877 | P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make : C P Brass concealed 25mm nominal bore. |
| 878 | P & F 15 mm. Dia Connection Pipe of approved quality/make : PVC pipe with C.P. Brass nuts upto length, 450mm |
| 879 | P & F Looking Mirrors with P.V.C. frame of approved (Atul Modi Guard Saint Gobin or equivalent)Size 500 x 400 mm |
| 880 | P & F PVC Storage Tank (IS : 12701 marked indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity |
| 881 | Hoisting charges for each floor |
| 882 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 110mm dia |
| 883 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality /make. |
| 884 | Bend 87.5 Dg. 110mm dia |
| 885 | Single Tee 110mm dia |
| 886 | Coupler110mm dia |
| 887 | Vent Cowel 100 mm |
| 888 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia |
| 889 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: |
| 890 | Coupler (socket) - 110 mm dia |
| 891 | Bend 87.5- 110 mm dia |
| 892 | Pipe clip - 110 mm dia |
| 893 | P & F Soap Dish or Tray of approved quality/make C.P. brass heavy and superior quality. |
| 894 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI marked medium duty PVC conduit & it"s accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 A switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.G1 |
| 895 | Short point (up to 3 mtr.) |
| 896 | Medium point (up to 6 mtr.) |
| 897 | Long point(up to 10 mtr.) |
| 898 | Wiring of 3 pin 5 amp. light plug point with 1.5 sq. mmFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved makein surface / recessed ISI marked medium duty PVC conduit & it"s accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 Aswitch, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.G1 On board |
| 899 | Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175 x 100 x 60 mm. on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet, making connection , testing , etc. as required.G1 |
| 900 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required.G1 1x1.5sqmm |
| 901 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 902 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 903 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar, conforming to IS13032 & IS8623 including making internal DBterminations with copper lugs , testing etc. as required.G1 Double door (single phase) 12 Way |
| 904 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.GROUP 1 |
| 905 | Single pole MCB6 A to 32 A rating |
| 906 | Double pole MCB6 A to 32 A rating |
| 907 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required includingcutting the wall and making good the same as required.GROUP 1 |
| 908 | 20 mm |
| 909 | 25 mm |
| 910 | Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying3 to 4 mtr. below the ground level with 25mm dia. G.I. "B" class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C.finished chamber covered with hinged type with locking arrangement C.I. Cover,C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. |
| 911 | S & Laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 10 SWG copper. Wire |
| 912 | P & F of IP 20 LED tube light 20 watt with external batten made from CRCA sheet steel suitable to replace T-B/T-12 tube light, integral driver, 2000 luman + 5olo tolerarrce system luman efficiacy of 100 Lm/ watt minimum expected life time of 25000 burning hours, CCT 5700 I( ANSI, CRI 80, driver efficiency >850/o, Life expectancy of driver rnin 30000 hrs. PF 0,95 at full load/ 230 volt AC. |
| 913 | P & F double ball bearing capacitor start ceilingfan of approved make complete with regulator and other accessories as required. GROUP 1 1200 mm sweep |
| 914 | P & F IP-65 / IP-66 protected LED street light luminaire on existing bracket. Fixture made from powder coated single piece pressure die cast aluminium housing with UV stablized PC/Toughened glass cover (from 45W onwards) and should be secondary lens on each LED. The System level luminaire efficacy = 100 with high power LEDs of CREE/NICHIA/OSRAM/PHILPS/SEOUL make is to be used. The LED driver shall be BIS certified and input voltage AC 110 to 270 V AC with input voltagefrequency 50 Hz +3% Power factor 0.95 Driver eficiency 85%, THD () 10% Humidity 10% to 90% RH working temp. - 20C to 50C. Life expectancy equal or more than 50000 buring hrs. with minimuum 70% initial lumens maintained, Rendering index - 75% surge protection shall be min - 5 kv internal and min 10 KV external. Manufactures work mark/name engraved/embossed on die cast housing to allow traceability / authenticity till life of fixture. Fixtures shall be CE complianed. LED street Lifht fixture 30 Watt. |
| 915 | S & F of Street light bracket made out from following size of " B "class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required.32 mm dia |
| 916 | Repair Work of Roof, Flooring, Toilet at SHC Sangawas, Block:- Deogarh, Dist. - Rajsamand |
| 917 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mtr lead |
| 918 | Dismantling of flooring with care including stacking of serveciable material and disposal of unserviceable material with in 50 mtr lead for: Cement Concrete Flooring |
| 919 | Dismantling roofs with care including stacking of serviceable material and disposal of unserviceable material within 50 mtr lead for : Lime Terrace |
| 920 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead. Of area 3 square meter and below |
| 921 | Providing and laying in position cement concrete including curing compaction etc . Completein specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 922 | Half brick masonry in superstructure up to third storey including cost of nominal hoopreinforcement ( 2 Nos. 6 mm dia M.S. bar at every forth course ) using bricks of designation 75Cement mortar 1:4 ( 1 cement : 4 coarse sand ) |
| 923 | Providing and fixing Ist quality standard White/ ivory,grey, fuma red brown, light green, light blue and other light shades Glazed Tiles of (confirming to IS : 13753 & IS 13622) of size 300 mm x 200 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls & pillars ). |
| 924 | Providing and fixing Ist quality MAT finished ceremic tiles size 300 x 300 mm confirming to IS: 13755 & IS: 15622 colour such as white, grey, Ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4). |
| 925 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure"A". 30 mm ThickCommercial Veneer both side |
| 926 | Add extra in flush doors :For external teak wood lipping on flush door 30 mm x 6 mm |
| 927 | Add extro for Sunmica 0.8 mm thick. |
| 928 | Providing and fixing Granite stone slab thickness 16 - 18 mm mirror polished and machine cut in walls, pillars, steps, shelves, counter, floors etc. laid on 12 mm (Av.) thick base of cement mortar 1:3(1 cement : 3 coarse sand) jointing with white cement mortar 1:2 ( 1 White cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of. Green/Black/Other granite . Above 3601 cm2 Slabs |
| 929 | Extra for providing edge moulding to 16 - 18 mm thick marble stonecounters . vantities etc. Over item No. 7.1 & 7.2 including machines polishing to edge to give high gloss finish etc. Complete as per design approved by Engineer - in- charge. Granite Work |
| 930 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade,laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. Size 600 mm x 600 mm |
| 931 | 35mm thick Rough chiesel dressed stone flooring of approved shade set in pattern over 20mm thick base of cement mortar 1:6 ( 1 cement : 6 coarse sand) and jointed with cement sand mortar 1:3 complete in all respects: Nimbahera Stone |
| 932 | Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish:20mm thick |
| 933 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work including prepration of base with primer putty lippy complete in all respect. |
| 934 | Applying Birla /JK white cement based putty over cement plaster surface for making even surface |
| 935 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). |
| 936 | Providing and fixing T-iron frames for doors windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs, 10cm long embedded in cement concrete blocks 15x10x10cm of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screw or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 937 | Painting with enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 938 | Marble stone flooring table rubbed, 16 - 18 mm thick over 20 mm (Av.) thick base of CM 1:4( 1 Cement : 4 coarse sand) jointing with white cement mortar 1:2 ( 1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding rubbing and polishing complete. Green Marble Upto 800 cm2 tiles |
| 939 | Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 guage Thickness, joint mitred welded and grinded including hold fast of lugs 13mmx 3mm and 15cm long embedded in C.C. block 15x10x10cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of approved quality,windows shutters made out of 50x25mm hollow steel section 15 mm paitam of 18 guage thickness, joint mitred and grinded including 10mmx10mm square bras welded to frame for paitam fixing float glass 4 mm thick panes with glazzing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100mmlong, tower bolts 100mm long of steel powder coate superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respectas per direction of Engineer-in-charge. |
| 940 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not exceeding 150mm distance. |
| 941 | Providing and fixing square bars or other flat welded to window ventilatiors etc. |
| 942 | Renewing glass panes, with putty and nails wherever necessary : 5.5 mm thick plain glass panes |
| 943 | Grading for roof water proofing treatment with : Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) with water proofing compound as per manufacturs"s specification |
| 944 | Providing and fixing tiles overroof fixed in25mm thick in cement mortar 1:4 bed complete. 20 mm thick plain C.C. roofing tiles |
| 945 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finishing with cement mortar 1:3 as per standard design. |
| 946 | Part "B" Sanitary Work |
| 947 | P & F Indian type white glazed vitreous china Ist quality W.C.orissapan (I.S: 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor. Size 580 x 440 mm |
| 948 | P & F WVC wash basin (Ist quality, I.S.: 2556 Mark) of approved make with C.I. brackets duly painted 1 No 15 mm C.P. pillar cock (I.S. : 8934 Mark) & 32 mm C.P. brass wastecoupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.Size 550x400mm |
| 949 | P &F Kitchen & Lab. Sink of approved make with C.I. bracketsduly painted 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor. 1.0 mm thick Salem stainless steek AISI- 304 kitchen sink of approved make (Nirali, Neel Kanth, Jaina, Faber-castelll) with large waste coupling.Overall Sizes 22 x18 x 7 inches, Bowl sizes 20 x16 x 7 inches |
| 950 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). |
| 951 | 20mmNominal outer dia pipes |
| 952 | 32mmNominal outer dia pipes |
| 953 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: |
| 954 | C.P. Brass bib cock,15mm nominal bore. |
| 955 | C.P. Brass Long body, 15mm nominal bore weight not less than 690 gm |
| 956 | P & F Towel Rail or Ring of approved quality/ make:C.P. brass towel rail with brackets 450 x 20 mm |
| 957 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.400 gm,15mm. |
| 958 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked) |
| 959 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : |
| 960 | Gun-metal 20mm nominal bore. |
| 961 | Gun-metal 32mm nominal bore. |
| 962 | P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make : C P Brass concealed 25mm nominal bore. |
| 963 | P & F 15 mm. Dia Connection Pipe of approved quality/make : PVC pipe with C.P. Brass nuts upto length, 450mm |
| 964 | P & F Looking Mirrors with P.V.C. frame of approved (Atul Modi Guard Saint Gobin or equivalent)Size 500 x 400 mm |
| 965 | P & F PVC Storage Tank (IS : 12701 marked indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity |
| 966 | Hoisting charges for each floor |
| 967 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 110mm dia |
| 968 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality /make. |
| 969 | Bend 87.5 Dg. 110mm dia |
| 970 | Single Tee 110mm dia |
| 971 | Coupler110mm dia |
| 972 | Vent Cowel 100 mm |
| 973 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia |
| 974 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: |
| 975 | Coupler (socket) - 110 mm dia |
| 976 | Bend 87.5- 110 mm dia |
| 977 | Pipe clip - 110 mm dia |
| 978 | P & F Soap Dish or Tray of approved quality/make C.P. brass heavy and superior quality. |
| 979 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI marked medium duty PVC conduit & it"s accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 A switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.G1 |
| 980 | Short point (up to 3 mtr.) |
| 981 | Medium point (up to 6 mtr.) |
| 982 | Long point(up to 10 mtr.) |
| 983 | Wiring of 3 pin 5 amp. light plug point with 1.5 sq. mmFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved makein surface / recessed ISI marked medium duty PVC conduit & it"s accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 Aswitch, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.G1 On board |
| 984 | Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175 x 100 x 60 mm. on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet, making connection , testing , etc. as required.G1 |
| 985 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required.G1 1x1.5sqmm |
| 986 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 987 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 988 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar, conforming to IS13032 & IS8623 including making internal DBterminations with copper lugs , testing etc. as required.G1 Double door (single phase) 12 Way |
| 989 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.GROUP 1 |
| 990 | Single pole MCB6 A to 32 A rating |
| 991 | Double pole MCB6 A to 32 A rating |
| 992 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required includingcutting the wall and making good the same as required.GROUP 1 |
| 993 | 20 mm |
| 994 | 25 mm |
| 995 | Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying3 to 4 mtr. below the ground level with 25mm dia. G.I. "B" class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C.finished chamber covered with hinged type with locking arrangement C.I. Cover,C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. |
| 996 | S & Laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 10 SWG copper. Wire |
| 997 | P & F of IP 20 LED tube light 20 watt with external batten made from CRCA sheet steel suitable to replace T-B/T-12 tube light, integral driver, 2000 luman + 5olo tolerarrce system luman efficiacy of 100 Lm/ watt minimum expected life time of 25000 burning hours, CCT 5700 I( ANSI, CRI 80, driver efficiency >850/o, Life expectancy of driver rnin 30000 hrs. PF 0,95 at full load/ 230 volt AC. |
| 998 | P & F double ball bearing capacitor start ceilingfan of approved make complete with regulator and other accessories as required. GROUP 1 1200 mm sweep |
| 999 | P & F IP-65 / IP-66 protected LED street light luminaire on existing bracket. Fixture made from powder coated single piece pressure die cast aluminium housing with UV stablized PC/Toughened glass cover (from 45W onwards) and should be secondary lens on each LED. The System level luminaire efficacy = 100 with high power LEDs of CREE/NICHIA/OSRAM/PHILPS/SEOUL make is to be used. The LED driver shall be BIS certified and input voltage AC 110 to 270 V AC with input voltagefrequency 50 Hz +3% Power factor 0.95 Driver eficiency 85%, THD () 10% Humidity 10% to 90% RH working temp. - 20C to 50C. Life expectancy equal or more than 50000 buring hrs. with minimuum 70% initial lumens maintained, Rendering index - 75% surge protection shall be min - 5 kv internal and min 10 KV external. Manufactures work mark/name engraved/embossed on die cast housing to allow traceability / authenticity till life of fixture. Fixtures shall be CE complianed. LED street Lifht fixture 30 Watt. |
| 1000 | S & F of Street light bracket made out from following size of " B "class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required.32 mm dia |
| 1001 | Repair Work of Roof, Flooring, Toilet at SHC Tapalo Ka Khera, Block:- Deogarh, Dist. - Rajsamand |
| 1002 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in lead of 50 mtr. All kinds of soil. |
| 1003 | Providing and laying in position cement concrete including curing compaction etc . Completein specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 1004 | Random rubble stone masonary for foundation and plinth in cement sand mortar above 30 cm thick wall in: Cement mortar 1:6( 1 Cement : 6 Sand ) |
| 1005 | Random Rubble stone masonary for superstructure above plinth level one storey height above 30 cm. thick walls in : Cement mortar 1:6 ( 1 Cement : 6 Sand ) |
| 1006 | Pointingonstonemasonryincementsandmortar 1:3 (1 cement : 3 sand) : Flush or ruled pointing. |
| 1007 | Finishing wall with water proofing cement paint of approved brand and manufacture and or required shadetogive an even shade including all scaffolding: New Work (Three or more coats). |
| 1008 | Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish:20mm thick |
| 1009 | Providing and fixing precast cement concrete coping 1:2:4 mix 50 mm thick complete as per specification: |
| 1010 | Painting with enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 1011 | Part "B" Sanitary Work |
| 1012 | Providing and fixing steel gate grating and grills made of angles, tees, square bars orflats black pipe with holdfast and fittings complete as per deign and drawing including cutting welding and fabrication with priming coat of red oxide. |
| 1013 | Structural steel work riveted or bolted in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level upto 4.5 mtr height. |
| 1014 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI marked medium duty PVC conduit & it"s accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 A switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.G1 |
| 1015 | Short point (up to 3 mtr.) |
| 1016 | Medium point (up to 6 mtr.) |
| 1017 | Long point(up to 10 mtr.) |
| 1018 | Wiring of 3 pin 5 amp. light plug point with 1.5 sq. mmFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved makein surface / recessed ISI marked medium duty PVC conduit & it"s accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 Aswitch, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.G1 On board |
| 1019 | Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175 x 100 x 60 mm. on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet, making connection , testing , etc. as required.G1 |
| 1020 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required.G1 1x1.5sqmm |
| 1021 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 1022 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 1023 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar, conforming to IS13032 & IS8623 including making internal DBterminations with copper lugs , testing etc. as required.G1 Double door (single phase) 12 Way |
| 1024 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.GROUP 1 |
| 1025 | Single pole MCB6 A to 32 A rating |
| 1026 | Double pole MCB6 A to 32 A rating |
| 1027 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required includingcutting the wall and making good the same as required.GROUP 1 |
| 1028 | 20 mm |
| 1029 | 25 mm |
| 1030 | Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying3 to 4 mtr. below the ground level with 25mm dia. G.I. "B" class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C.finished chamber covered with hinged type with locking arrangement C.I. Cover,C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. |
| 1031 | S & Laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 10 SWG copper. Wire |
| 1032 | P & F of IP 20 LED tube light 20 watt with external batten made from CRCA sheet steel suitable to replace T-B/T-12 tube light, integral driver, 2000 luman + 5olo tolerarrce system luman efficiacy of 100 Lm/ watt minimum expected life time of 25000 burning hours, CCT 5700 I( ANSI, CRI 80, driver efficiency >850/o, Life expectancy of driver rnin 30000 hrs. PF 0,95 at full load/ 230 volt AC. |
| 1033 | P & F double ball bearing capacitor start ceilingfan of approved make complete with regulator and other accessories as required. GROUP 1 1200 mm sweep |
| 1034 | P & F IP-65 / IP-66 protected LED street light luminaire on existing bracket. Fixture made from powder coated single piece pressure die cast aluminium housing with UV stablized PC/Toughened glass cover (from 45W onwards) and should be secondary lens on each LED. The System level luminaire efficacy = 100 with high power LEDs of CREE/NICHIA/OSRAM/PHILPS/SEOUL make is to be used. The LED driver shall be BIS certified and input voltage AC 110 to 270 V AC with input voltagefrequency 50 Hz +3% Power factor 0.95 Driver eficiency 85%, THD () 10% Humidity 10% to 90% RH working temp. - 20C to 50C. Life expectancy equal or more than 50000 buring hrs. with minimuum 70% initial lumens maintained, Rendering index - 75% surge protection shall be min - 5 kv internal and min 10 KV external. Manufactures work mark/name engraved/embossed on die cast housing to allow traceability / authenticity till life of fixture. Fixtures shall be CE complianed. LED street Lifht fixture 30 Watt. |
| 1035 | S & F of Street light bracket made out from following size of " B "class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required.32 mm dia |
| 1036 | Repair Work of Roof, Flooring, Toilet at SHC Tokra, Block:- Deogarh, Dist. - Rajsamand |
| 1037 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mtr lead |
| 1038 | Dismantling of flooring with care including stacking of serveciable material and disposal of unserviceable material with in 50 mtr lead for: Cement Concrete Flooring |
| 1039 | Dismantling roofs with care including stacking of serviceable material and disposal of unserviceable material within 50 mtr lead for : Lime Terrace |
| 1040 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead. Of area 3 square meter and below |
| 1041 | Providing and laying in position cement concrete including curing compaction etc . Completein specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 1042 | Half brick masonry in superstructure up to third storey including cost of nominal hoopreinforcement ( 2 Nos. 6 mm dia M.S. bar at every forth course ) using bricks of designation 75Cement mortar 1:4 ( 1 cement : 4 coarse sand ) |
| 1043 | Providing and fixing Ist quality standard White/ ivory,grey, fuma red brown, light green, light blue and other light shades Glazed Tiles of (confirming to IS : 13753 & IS 13622) of size 300 mm x 200 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls & pillars ). |
| 1044 | Providing and fixing Ist quality MAT finished ceremic tiles size 300 x 300 mm confirming to IS: 13755 & IS: 15622 colour such as white, grey, Ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4). |
| 1045 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure"A". 30 mm ThickCommercial Veneer both side |
| 1046 | Add extra in flush doors :For external teak wood lipping on flush door 30 mm x 6 mm |
| 1047 | Add extro for Sunmica 0.8 mm thick. |
| 1048 | Providing and fixing Granite stone slab thickness 16 - 18 mm mirror polished and machine cut in walls, pillars, steps, shelves, counter, floors etc. laid on 12 mm (Av.) thick base of cement mortar 1:3(1 cement : 3 coarse sand) jointing with white cement mortar 1:2 ( 1 White cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of. Green/Black/Other granite . Above 3601 cm2 Slabs |
| 1049 | Extra for providing edge moulding to 16 - 18 mm thick marble stonecounters . vantities etc. Over item No. 7.1 & 7.2 including machines polishing to edge to give high gloss finish etc. Complete as per design approved by Engineer - in- charge. Granite Work |
| 1050 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade,laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. Size 600 mm x 600 mm |
| 1051 | 35mm thick Rough chiesel dressed stone flooring of approved shade set in pattern over 20mm thick base of cement mortar 1:6 ( 1 cement : 6 coarse sand) and jointed with cement sand mortar 1:3 complete in all respects: Nimbahera Stone |
| 1052 | Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish:20mm thick |
| 1053 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work including prepration of base with primer putty lippy complete in all respect. |
| 1054 | Applying Birla /JK white cement based putty over cement plaster surface for making even surface |
| 1055 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). |
| 1056 | Providing and fixing T-iron frames for doors windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs, 10cm long embedded in cement concrete blocks 15x10x10cm of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screw or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 1057 | Painting with enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 1058 | Marble stone flooring table rubbed, 16 - 18 mm thick over 20 mm (Av.) thick base of CM 1:4( 1 Cement : 4 coarse sand) jointing with white cement mortar 1:2 ( 1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding rubbing and polishing complete. Green Marble Upto 800 cm2 tiles |
| 1059 | Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 guage Thickness, joint mitred welded and grinded including hold fast of lugs 13mmx 3mm and 15cm long embedded in C.C. block 15x10x10cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of approved quality,windows shutters made out of 50x25mm hollow steel section 15 mm paitam of 18 guage thickness, joint mitred and grinded including 10mmx10mm square bras welded to frame for paitam fixing float glass 4 mm thick panes with glazzing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100mmlong, tower bolts 100mm long of steel powder coate superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respectas per direction of Engineer-in-charge. |
| 1060 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not exceeding 150mm distance. |
| 1061 | Providing and fixing square bars or other flat welded to window ventilatiors etc. |
| 1062 | Renewing glass panes, with putty and nails wherever necessary : 5.5 mm thick plain glass panes |
| 1063 | Grading for roof water proofing treatment with : Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) with water proofing compound as per manufacturs"s specification |
| 1064 | Providing and fixing tiles overroof fixed in25mm thick in cement mortar 1:4 bed complete. 20 mm thick plain C.C. roofing tiles |
| 1065 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finishing with cement mortar 1:3 as per standard design. |
| 1066 | Part "B" Sanitary Work |
| 1067 | P & F Indian type white glazed vitreous china Ist quality W.C.orissapan (I.S: 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor. Size 580 x 440 mm |
| 1068 | P & F WVC wash basin (Ist quality, I.S.: 2556 Mark) of approved make with C.I. brackets duly painted 1 No 15 mm C.P. pillar cock (I.S. : 8934 Mark) & 32 mm C.P. brass wastecoupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.Size 550x400mm |
| 1069 | P &F Kitchen & Lab. Sink of approved make with C.I. bracketsduly painted 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor. 1.0 mm thick Salem stainless steek AISI- 304 kitchen sink of approved make (Nirali, Neel Kanth, Jaina, Faber-castelll) with large waste coupling.Overall Sizes 22 x18 x 7 inches, Bowl sizes 20 x16 x 7 inches |
| 1070 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). |
| 1071 | 20mmNominal outer dia pipes |
| 1072 | 32mmNominal outer dia pipes |
| 1073 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: |
| 1074 | C.P. Brass bib cock,15mm nominal bore. |
| 1075 | C.P. Brass Long body, 15mm nominal bore weight not less than 690 gm |
| 1076 | P & F Towel Rail or Ring of approved quality/ make:C.P. brass towel rail with brackets 450 x 20 mm |
| 1077 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.400 gm,15mm. |
| 1078 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked) |
| 1079 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : |
| 1080 | Gun-metal 20mm nominal bore. |
| 1081 | Gun-metal 32mm nominal bore. |
| 1082 | P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make : C P Brass concealed 25mm nominal bore. |
| 1083 | P & F 15 mm. Dia Connection Pipe of approved quality/make : PVC pipe with C.P. Brass nuts upto length, 450mm |
| 1084 | P & F Looking Mirrors with P.V.C. frame of approved (Atul Modi Guard Saint Gobin or equivalent)Size 500 x 400 mm |
| 1085 | P & F PVC Storage Tank (IS : 12701 marked indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity |
| 1086 | Hoisting charges for each floor |
| 1087 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 110mm dia |
| 1088 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality /make. |
| 1089 | Bend 87.5 Dg. 110mm dia |
| 1090 | Single Tee 110mm dia |
| 1091 | Coupler110mm dia |
| 1092 | Vent Cowel 100 mm |
| 1093 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia |
| 1094 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: |
| 1095 | Coupler (socket) - 110 mm dia |
| 1096 | Bend 87.5- 110 mm dia |
| 1097 | Pipe clip - 110 mm dia |
| 1098 | P & F Soap Dish or Tray of approved quality/make C.P. brass heavy and superior quality. |
| 1099 | Structural steel work riveted or bolted in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level upto 4.5 mtr height. |
| 1100 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI marked medium duty PVC conduit & it"s accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 A switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.G1 |
| 1101 | Short point (up to 3 mtr.) |
| 1102 | Medium point (up to 6 mtr.) |
| 1103 | Long point(up to 10 mtr.) |
| 1104 | Wiring of 3 pin 5 amp. light plug point with 1.5 sq. mmFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved makein surface / recessed ISI marked medium duty PVC conduit & it"s accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& falce ceiling point,6 Aswitch, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.G1 On board |
| 1105 | Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175 x 100 x 60 mm. on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet, making connection , testing , etc. as required.G1 |
| 1106 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required.G1 1x1.5sqmm |
| 1107 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 1108 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 1109 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar, conforming to IS13032 & IS8623 including making internal DBterminations with copper lugs , testing etc. as required.G1 Double door (single phase) 12 Way |
| 1110 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.GROUP 1 |
| 1111 | Single pole MCB6 A to 32 A rating |
| 1112 | Double pole MCB6 A to 32 A rating |
| 1113 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required includingcutting the wall and making good the same as required.GROUP 1 |
| 1114 | 20 mm |
| 1115 | 25 mm |
| 1116 | Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying3 to 4 mtr. below the ground level with 25mm dia. G.I. "B" class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C.finished chamber covered with hinged type with locking arrangement C.I. Cover,C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. |
| 1117 | S & Laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 10 SWG copper. Wire |
| 1118 | P & F of IP 20 LED tube light 20 watt with external batten made from CRCA sheet steel suitable to replace T-B/T-12 tube light, integral driver, 2000 luman + 5olo tolerarrce system luman efficiacy of 100 Lm/ watt minimum expected life time of 25000 burning hours, CCT 5700 I( ANSI, CRI 80, driver efficiency >850/o, Life expectancy of driver rnin 30000 hrs. PF 0,95 at full load/ 230 volt AC. |
| 1119 | P & F double ball bearing capacitor start ceilingfan of approved make complete with regulator and other accessories as required. GROUP 1 1200 mm sweep |
| 1120 | P & F IP-65 / IP-66 protected LED street light luminaire on existing bracket. Fixture made from powder coated single piece pressure die cast aluminium housing with UV stablized PC/Toughened glass cover (from 45W onwards) and should be secondary lens on each LED. The System level luminaire efficacy = 100 with high power LEDs of CREE/NICHIA/OSRAM/PHILPS/SEOUL make is to be used. The LED driver shall be BIS certified and input voltage AC 110 to 270 V AC with input voltagefrequency 50 Hz +3% Power factor 0.95 Driver eficiency 85%, THD () 10% Humidity 10% to 90% RH working temp. - 20C to 50C. Life expectancy equal or more than 50000 buring hrs. with minimuum 70% initial lumens maintained, Rendering index - 75% surge protection shall be min - 5 kv internal and min 10 KV external. Manufactures work mark/name engraved/embossed on die cast housing to allow traceability / authenticity till life of fixture. Fixtures shall be CE complianed. LED street Lifht fixture 30 Watt. |
| 1121 | S & F of Street light bracket made out from following size of " B "class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required.32 mm dia |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
