|
| 1 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in shelves, including setting in cement mortar 1:3 (1cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 2 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 3 | Thermo-Mechanically Treated bars of grade Fe-500D or m |
| 4 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. |
| 5 | Granite stone slab of colour black, Cherry/Ruby red3.1.1) Area of slab over 0.50 sqm |
| 6 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. |
| 7 | Fixed to steel windows by welding |
| 8 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : |
| 9 | 100X58X1.90 mm |
| 10 | 75x47x1.80 mm |
| 11 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 12 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 13 | 250x16 mm |
| 14 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 15 | 150x10 mm |
| 16 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 17 | 125 mm |
| 18 | 100 mm |
| 19 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 20 | Twin rubber stopper |
| 21 | Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) |
| 22 | 12 mm cement plaster of mix : |
| 23 | 1:4 (1 cement: 4 fine sand) |
| 24 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : |
| 25 | Water thinnable cement primer |
| 26 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : |
| 27 | Two or more coats on new work |
| 28 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: |
| 29 | One or more coats on old work |
| 30 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 31 | One or more coats on old work |
| 32 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 33 | With cement mortar 1:4 (1 cement : 4 fine sand) |
| 34 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 35 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 36 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 37 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the walls wherever require: |
| 38 | White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap |
| 39 | Providing and fixing white vitreous china laboratory sink with C.I.brackets, C.P. brass chain with rubber plug, 40 mm C.P brass wasteand 40mm C.P. brass trap with necessary C.P. brass unions complete,including painting of fittings and brackets, cutting and making good the wall wherever required : |
| 40 | Size 600x450x200 mm |
| 41 | Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete. |
| 42 | Flexible pipe22.1.1) 32 mm dia |
| 43 | Providing and fixing 600x450 mm beveled edge mirror of superiorglass (of approved quality) complete with 6 mm thick hard boardground fixed to wooden cleats with C.P. brass screws and washerscomplete. |
| 44 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls |
| 45 | 20 mm nominal dia Pipes |
| 46 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 47 | 45 cm length25.1.1) 15 mm nominal bore |
| 48 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 49 | 15mm nominal bore |
| 50 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 51 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : |
| 52 | For fixed portion28.1.1) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 53 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)28.2.1) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 54 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. |
| 55 | Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side |
| 56 | Pre-laminated particle board with decorative lamination on both sides |
| 57 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 58 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 59 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 60 | Providing and fixing FROSTED Glass in Aluminium door, windows, ventilator shutters and partitions etc. with EPDM robber/ neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge. (cost of aluminium snap beading shall be paid in basic item): |
| 61 | With Frosted glass panes of 5.50 mm thickness |
| 62 | Providing and Laying hollow cement concrete block walling 100mm thick consisting of hollow blocks of size 400 x 100 x 200 mm of mix 1:3:6 (1cement : 3Coarse sand and 6 graded stone aggregate 10 mm nominal and down size) laid in cement mortar 1:6 (1 cement : 6 Coarse Sand ) up to five floor level. |
| 63 | Providing and fixing CP brass Surgical purpose Elbow action bib cock with extended lever handle & wall flange of make Jaquar (code No. FLR-5043N) or equivalent as desired by the Engineer in charge.. |
| 64 | 15mm nominal bore |
| 65 | Providing & fixing 38mm double shutter wood panelled doors with outer framework of 100mm x 75mm shutter frame to consisits of vertical and horizontal styles of 100mm x 38mm and insert panels to be made from 18mmedge glued panel rubber wood boards polished withtwo coats of natural mat melamine/polyurethane over necessary surface preparation - sanding application of wood filler putty and sanding over all etc. complete as per the direction of Engineer-in-charge. |
| 66 | Providing and fixing handle cum lock (Maruti handle) for sliding rack of size 930 mm x 75 mm. |
| 67 | Providing and fixing CPVC ball valve (Union type) of approved quality. |
| 68 | 20 mm nominal bore |
| 69 | Providing and fixing UPVC (SWR) soil, waste and vent pipes (working pressure 6kg/sqcm) including jointing with solvent |
| 70 | 75mm dia |
| 71 | Providing and fixing PVC moulded fittings/ accessories for PVC pipes including jointing with solvent. |
| 72 | 75mm diaPVC Plain bend |
| 73 | Providing and fixing plain lining with necessary screws/nuts and bolts/nails fixed on wooden/steel frame work with priming coat on both surface with necessary fixing arrangement and screws etc. complete |
| 74 | 19 mm thick plywood IS : 710 |
| 75 | Providing and fixing 1 mm thick sunmica (Any colour) on cupboard shutter front side and the edge coveredwith beading including cost of all materials, adhesive etc. complete as per direction of Engineer-in-charge. |
| 76 | Providing and fixing sliding arrangement in shutter by rollers to run inside C or E aluminium channel section. (Payment of C or E channel shall be made separately). |
| 77 | Removing and refixing of existing aluminium glazed partition by providing necessary screws cleats etc. complete. |
