Military Engineer Services-MES has published Tender For Repair To Flooring, Ceiling, Roofing And Certain Other Misc Wk At Age B/R-Ii Under Ge Jhansi. Submission Date for this Tender is 09-01-2023. Shed Construction Tenders in jhansi Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone wall,dado and skirtingetc including racking out joints hacking for key scrubbing down with water etc, complete all as specified and directed. |
| 2 | M&L for15mm rendering thick in CM (1:4) on fair faces of brick work/concrete surfaces finished even & smooth (without using extra cement), complete all as specified and directed. |
| 3 | M&L for rendering 10 mm thick in CM(1:6) on fair faces of brick work/concrete surfaces, finished even & smooth (without using extra cement), complete all as specified and directed. |
| 4 | Preparing newly plastered surfaces of wall and applying two coats of oil bound distemberover a coat of puttyto make the surface to be plain and smoothcomplete all as sppecified and directed. |
| 5 | M&L for preparation of new plastered surface and applying two coat of cement based paint over and incl one coat of exterior grade cement based primer, complete all as specified and directed. |
| 6 | Demolition of cement concrete in ground floor including terrazo flooringand paving n exc 15cm thickness (below or above the ground level) built in cement mortar and rubbish off the premises, Complete all as specified and directed. |
| 7 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed. |
| 8 | M&L for 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in padding levelling etc, complete all as specified and directed. |
| 9 | M&L for 15 mm thick screed / bedding layer in CM (1:6), complete all as specified and directed. |
| 10 | M&L for 10 mm thick CM rendering in CM 1:4 as in backing coat, complete all as specified and as directed. |
| 11 | M&L for joint free, non-skid ceramic coloured tiles of size 600x600mm, 8 to 10 mm thick (square/ rectangular), in floors etc, set and jointed in neat cement slurry complete all as specified and directed. |
| 12 | All as per item No 11 here-in-above but on vertical surfaces such as skirting/dado, complete all as specified and directed. |
| 13 | M&L for 50 mm thick plain cement concrete type D2 (1:4:8) (40mm graded aggregate) as in sub base complete all as specified and directed. |
| 14 | M&L for machine cut Kota stone slab flooring 20-25 mm thick and laid over and incl 20 mm thick screed bed in CM (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab, with and including Cutting / Griding / mirror Polishing on Kota stone as per local trade practice, complete all as specified and directed. |
| 15 | All as per item here-in-above 14 but on vertical surfaces such as skirting/dado over 10mm thick CM rendering in CM 1:4. complete all as specified and directed. |
| 16 | Dismantling Asbestos Cement Corrugated or Semicorrugate in Roof covering complete all as specified and directed. |
| 17 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick AZ 150 of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 18 | M&L for pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed. |
| 19 | M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L-type or J-type or cranked hook bolt or screw etc where required, complete all as specified and directed. |
| 20 | M&L for Asbestos cement one piece plain angular ridge 6mm thick, Fixed with L-type or J-type or cranked hook bolts, complete all as specified and directed. |
| 21 | Dismantling timber scantling 40 Sqcm and over in section in any position as in unframed works such as roof purlins, rafters, fillets ,ridges etc as in ceiling complete all as specified and directed. |
| 22 | M&L mild steel (Fe 410W, Gde 250) work as roof trusses (framed) trussed, purlins, crane gantries ,rails and fastenings and heavy brackets framing (beams, tee, angle, channels or flat sections) etc incl two coat of synthetic paint over a coat of primer, completeall as specified and directed. |
| 23 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including snap grid frame work complete all as specified and directed. |
| 24 | S&F of exposed frame false ceiling system with GI powder coated grid consisting of interlocking arrangement of main T runner of 15mm size, suspended at 1200mm C/C and cross T runner of 15mm size suspended at 600mm C/C supported by 1.5 mm dia GI wire from roof/Slab/truss including wall/perimeter runner/channel of 15 mm size with and including 6 mm thick pre-painted non asbestos fiber reinforced cement board (E-board), designer type of size 595x595mm duly fixed in ceiling frame work including taking down of ceiling light and point wiring if any and refixing it, complete all as specified and directed. |
| 25 | Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exceeding 4 sqm each including cutting holes in brick/ stone wall built in cement / lime mortar, embedded portion exc half brick but n.exc one brick for inserting new hold fast and making good the disturbed portion/surfaces, in CM 1:3 complete all as specified and directed. |
| 26 | All as per item No 25 here-in-above but n.exc 1.5 sqm each complete all as specified and directed. |
| 27 | Taking down shutters of any description exc 1 sqm and not exc 02 sqm each, complete all as specified and directed. |
| 28 | S&F of Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood colouredPVC sheet and edges, reinforced with MS square tube, as specified in SSR Part-II 2010 (Section 8, on Page no - 175), complete all as specified and directed. |
| 29 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails,MS frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strips of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/or sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed. |
| 30 | S&F of 150mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed. |
| 31 | S&F of 150mm aluminum handle cast type anodized complete all specified and directed. |
| 32 | S&F of 100 mm size butt hinges, extruded aluminum alloy with galvanized mild steel pin type B-21anodized complete all specified and directed. |
| 33 | S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. incl 3x100mm MS hinges, 2x150mmMS handle, 2x200mm MS Tower bolts and two coat sythetic paint over a coat of pink primer in each door, complete all as specified and directed. |
| 34 | S&F 30 mm Factory Made Solid Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, incl 3x100mm MS hinges, 2x150mmMS handle, 2x200mm MS Tower bolts, 1x300mm MS sliding bolt and two coat sythetic paint over a coat of pink primer in each door, complete all as specified and directed. |
| 35 | S&FWindow ECO 4000, of double rebate openable/fixed window made of galvanised steel colour coated/powder coated (base steel as per IS 513 Of "D" quality, galvanised as per IS 277 with zinc of 120 gms/sqm) with total thickness of coating 0.58 microns thick and back coated with alkyd backer 5-7 micron thick or powder coated with pure polyster powder up to 50-60 micron thick. Outer frame section 72 x 55 mm , center mullion section 72 x 50 mm, shutter section 47 x 20 mm, fly mesh section 40 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consist rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/grills, the section cut to length mitre joined with corner bracket, center millions fixed with mullions cap, stay, handle, latch, 2 nos of heavy duty stainless steel pivot hinges per shutter and paneled with 5 mm thick plain float glass and S. S. mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propyelene Diamine Monomer) gaskets including fixing windows in theConcrete /Masonry wall by means of self expanding screw, including 10 mm square bars welded to 6 x 12 mm flat at a distance 150mm C/C (Pitch) etc complete all as specified and directed. |
| 36 | M&L Framed work (Fe 410W, Gde 250) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing etc including hinges weld etc completeall as specified and directed . |
| 37 | S & F mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples, complete all as specified and directed. |
| 38 | S&F sheet glass ordinary quality & glazing with wooden bead/oil puttyin Square n.exc 0.5Sqm in each panel 3 mm thick incl hacking out old broken glass (any thickness, size, quality or des) complete all as specified and directed. |
| 39 | S&F 3 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane inl hacking out complete as specified and directed. |
| 40 | M & L for machine cut granite (of any type) tiles 20mm thick, bedded and jointed in counter with gray cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding, polishing and making hole in platform for gas pipe complete all as specified and directed. |
| 41 | Surface excavation not exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Hard/Dense soil complete all as specified and directed. |
| 42 | M&L for factory made PU coated, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with coloured pigment made of PVC moulded (or rubber mould) with vibrating system, with and including 50mm thick sand cushioning, complete all as specified and directed. Note: The cost of sand cushion is included. |
| 43 | M&L for 75mm thick plain cement concrete type D2 (1:4:8)(40mm graded aggregate) as in sub base complete all as specified and directed. |
| 44 | Stone kerb of roughly squared stones of size 20cm x 30cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck flush complete all as specified and directed. |
| 45 | M&L for cement concrete 1:2:4 type B-0 (12.5mm graded aggregate) as in coping etc complete all as specified and directed. |
| 46 | Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point, complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
