Forest Department-FD has published Tender For Construction Of Cafe For Sirmour Van Vihar At Sirmouri Tal Near Sataun, Under Division Forest Office Paonta Sahib. Submission Date for this Tender is 24-12-2022. Building Work Tenders in Sirmaur Himachal Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | EARTH WORK:- Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. |
2 | FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for : |
3 | Foundations, footings bases of columns etc. and mass concrete. |
4 | Columns,pillars,posts and struts.(i) Square, rectangular, polygonal in plan. |
5 | Beams, centilivers, girders and intels. Sides and soffits of beams, beam haunchings, contiliver girders, bressumers and intels not exceeding 1 Metre in depth: |
6 | CEMENT CONTRETE WORK:- Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) |
7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand) : 3 graded stone aggregate 20 mm nominal size) |
8 | G/F fo : foundation up to P/L |
9 | Lintels, beams girders bressumers and cantilevers : |
10 | Column, pillars, posts and struts: |
11 | slab: |
12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete |
13 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) |
14 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) |
15 | 15 mm cement plaster of mix :interior plastering 1:6 (1 cement: 6 fine sand) |
16 | 20 mm cement plaster of mix :exterior plastering 1:4 (1 cement: 4 fine sand) |
17 | WOOD WORK:- Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Kiln seasoned and chemically treated hollock wood |
18 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge.Kiln seasoned and chemically treated hollock wood. 35 mm thick shutters |
19 | Providing fixing bright finished brass tower bolts (barrel type) with screws etc. complete. |
20 | 200x10 mm |
21 | Providing and fixing bright finished brass handles with screws etc. complete. |
22 | 125mm |
23 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper |
24 | Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) : Light shade pigment using white cement |
25 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete |
26 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
27 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble |
28 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre |
29 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture |
30 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surfaceven and smooth complete. |
31 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer |
32 | ROOF COVERING:- Providing and fixing 0.50mm ( Zero point FIFty millimeter) thick pre-painted steel sheet of TATA/ /DUROSHINEin roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 ( Twenty ) micron over 5 ( Five ) miocrons primer coating to back coat of polyster of 5 ( Five )microns over 5 ( Five) microns primer coating including fixing with pre-paintediron J or L hooks, bolts and nuts , 6mm diametre with prepaintedlimpet and rubber washers complete with all accessories as required . |
33 | Providing ridges or hips of width 60 cm overall width plain pre-painted steel sheet fixed with polymer coated J or L hooks,bolts and nuts 8 mm dia G.I. limpet and bitumen washers omplete. 0.50 mm thick with zinc coating not less than 275 gm/m² |
34 | BP SHEETS:- Providing and fixing of 40 cm overall width plain pre-painted steel sheet fixed with polymer coated J or L hooks, bolts and nuts, G.l. limpet and bitumen washer complete, in facia. 0.60 mm thick with zinc coating not less than 275 gm/m² |
35 | STEEL WORK:- Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint. In gratings framed guard bars,ladders, railling, brackets and similar works |
36 | Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
37 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
38 | 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. |
39 | SANITARY INSTALLATION:-Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work :- ( a ) 25 mm nominal bore |
40 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :. 25 to 40 mm nominal bore |
41 | Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately). |
42 | Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall etc. |
43 | (iii) 1620 (25 mm OD) pipe |
44 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
45 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: tincluding cutting holes & making good the same and carriage of materials within all leads and lifts :-Of Superior quality as per direction of Engineer-Charge.White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap |
46 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board . 510x1040 mm bowl depth 250 |
47 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40mm dia |
48 | Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore |
49 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work 20mm dia) |
50 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
51 | Providing and fixing C.P. brass long nose bib cock Cat no.CON 107KNJaquar or equivalentsingle controlof approved quality conforming to IS standards. 15 mm nominal bore |
52 | Providing and Fixing Swan neck pillar tap with left hand operating knob single control CON-CHR-123BKN of Jaquar or equivalentcomplete. |
53 | Providing and Fixing Concealed stop cock with wall flange of opel primeno. CON 083FTKStop Cock PM single control of jaquar or equavalent complete in all respect. |
54 | Providing and Fixing Soap dish stainless steel CAN -1131N of Jaquar or equivalentcomplete in all respect. |
55 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
56 | 25mm |
57 | Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
58 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore |
59 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110 mm |
60 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 150 mm |
61 | Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 90 mm |
62 | Providing and fixing PVC door bend with ovalaccess door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. |
63 | I) 110mm dia |
64 | II) 150 mm dia |
65 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete. |
66 | I) 110mm dia |
67 | II) 150mm dia |
68 | Providing and fixing PVC plain double equal branch ISI marked including fixing with approved adhesive etc. complete. |
69 | I) 110mm dia |
70 | II) 150mm dia |
71 | Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete |
72 | I) 110mm dia |
73 | II) 150mm dia |
74 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc.complete. |
75 | I) 110mm dia |
76 | II) 150mm dia |
77 | Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete. |
78 | I) 110mm dia |
79 | II) 150mm dia |
80 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. |
81 | Providing and fixing ball bearing for rolling shutters. |
82 | Construction of SeptikTank:-Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. |
83 | CEMENT CONCRETE WORK:- |
84 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) |
85 | 1:3:6 (1 cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) |
86 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) |
87 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) |
88 | Providing form work with steel plates 3.15 (Three point One Five ) millimeters thick welded with angle iron in frame 30*30*5 (Thirty into Thirty into Five ) millimeters, so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies in all heights of propping and centering below supporting floor to ceiling and removal of the same in-situ-reinforced concrete and plain concrete work. |
89 | Suspended floors, roofs, landings, balconies and access platform |
90 | Edges of slabs and breaks in floors and walls |
91 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand) : 3 graded stone aggregate 20 mm nominal size) |
92 | TOR STEEL. |
93 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more. |
94 | 20 millimeters thick cement plaster in single coat on the rough side of brick/concrete/ stone walls for interior plastering up to all heights including arises. Internal rounded angles, chamfers and/or rounded angles not exceeding 80 (Eighty) millimeters in girth and finished even and smooth in cement mortar 1:4(One cement: four sand)including carriate of materials within all leads and lifts. |
95 | Supplying and placingcast iron man hole. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail