|
| 1 | Quantity Reflected in BOQ is for one Site onlyfor four Number of sites the quantity will be multiplied: |
| 2 | Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width as well as 10 Sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out theexcavated soil and disposal of surplus excavated soil 1 mtr from cutting edge or as directed. including head load & carriage |
| 3 | P/L of dry stone soling duly hand packed including all carriages loading unloading complete job before laying of mud mate in trenches and in floors with nallah muck as fillingand ramming of solling in foundation trench with rammers to achive desired compaction of sub-base :incl. all carriages of material involved &head load. |
| 4 | P/L in position cement concrete of specified grade excl. the cast of centering and shuttering: 1:4:8 (1 cement 4: coarse sand 8 graded stone crushed agg.40mm nominal size).Incl. all carriages of material involved. |
| 5 | Providing/laying in position specified grade of Reinforced cement concrete work in plinth, Columns,Suspended Floors etcexcluding cost of centering, shuttering, finishing and reinforcement in (1:1.5 : 3) 1 cement: 1.5 : coarse sand 3: graded stone aggregate 20mm nominal size) incl. all carriages of material involved and Head Load. |
| 6 | a) Upto Plinth:- |
| 7 | b) Suspended Floors/Beams etc:- |
| 8 | Providing/laying in position specified grade excluding the cost of centering & shuttering – All work upto plinth level.(M-10 Mix) 1:3:6 (1 Cement: 3 Coarse Sand: 6 graded stone aggregate 20mm nominal size- crushed.) ncl. all carriages of material involved. |
| 9 | Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete (Thermo-Mechanically Treated bars) including head load & carriage by MT |
| 10 | Brick work with(Common Clay Burnt Up Bricks) in foundation & Plinth incement mortar of mix 1:6 (1 cement: 4 coarse sand)including extra cost above plinth level upto floor V-level. Incl Carriages/Headload of bricks upto site of work complete Job. |
| 11 | Centering and Shuttering, including strutting, propping and removal of form workkitply. Upto Plinth Level, Columns, suspended floors etc including head load & carriage all complete. |
| 12 | Upto Plinth:- |
| 13 | Suspended Floor:- |
| 14 | Filling Trenches of Foundation with available (excavated) good soil as refilling of gaps sides of plinth/ foundation trenches. |
| 15 | P/L Conduites for electric wiring, Fan Boxes, Light Boxes incl bends all complete including binding conduites with binding wire all complete job: |
| 16 | Fan Boxes: |
| 17 | Light Boxes: |
| 18 | Conduits: |
| 19 | Wood Work in frames of doors, windows, clerestory windows and other frames,fixed in position with hold fast lugs or with dash fasteners of required dia and length( Incl Cost of hold fast lugs or dash fastener , painting sides touching brick surface with black japan paint). 1st class importedKail, Including cost of all cairages by MT and Head Load complete Job |
| 20 | Structural steel work welded in built up sections trusses & framed work including cutting hoisting welding & fixing in position & applying a priming coat of approved steel primer in trusses,Rafters, purlins etc all completeincluding carriage & head load including cost of MS Plate Soffits under Chajja and Eaves Boarding: |
| 21 | Providing and fixing Colour Coated High Rib sheets of 0.50 mm thickin roofing of approved brand including all fixtures , nuts , bolts, washers,- as approved by engineer incharge including carriage & head load |
| 22 | Providing Ridges, Hips,Valley of matching Sheets over all width 60 cm to 90 cm as and where required with J or L hooks ,Bolts-Nuts as approved By engineer Incharge-including carriage & head load |
| 23 | 12 -15 mm cement plaster in 1:6 mix incl. all carriages of material involved. including head load & carriage |
| 24 | Cement concrete flooring 1:2:4 (1Cement:2 coarse sand :4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cast of nosing of steps etc complete.50mm thick with 20mm nominal size stone aggregate crushed. incl. all carriages of material involved. |
| 25 | Providing & fixing panelled or panelled & glazed shutters forwindows and clerestory windowsincl. IS mark black enamelled butt hinges with necessaryscrews excluding penelling which will be paid separately35mm to 40mm thickimported 1stclass imported kail wood) including head load & carriage .as approved by engineer incharge. |
| 26 | Providing & fixing panelling for panelled shutters forDoors,windows and clerestory windows of non-polished teak wood- including head load & carriage .as approved by engineer incharge. |
| 27 | Providing & fixingof 3.5 mm thick glass panes- including head load & carriage .as approved by engineer incharge. |
| 28 | Providing fixing of MS Grill work ofrequired size & specification complete including priming coatand painting two coats (verandah & Stair only) including head load & carriage |
| 29 | Applying 2mm thick white Cement Based Wall Care putty on wall surface for smooth finish (two or more coats) including head load & carriage |
| 30 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on New work on and above two coates of Wood Primer - including head load & carriage |
| 31 | Providing & fixing of hardware fittings of ISI mark of desired/approved make complete in all respects. including head load & carriage ( As approved by engineer incharge). |
| 32 | Handles 5\" (Ornamental Type) |
| 33 | T.Bolt 4\" |
| 34 | T.Bolt 6\" |
| 35 | Providing and fixing lSI marked oxidised M.S. sliding or equivalentdoor bolts (L-Drop) with nuts and screws etc. complete : 300x16 mm or 250x16 mm with locking systemornamental type as approved by engineer incharge. |
| 36 | Sanitary and Plumbing Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. including required hire and labour charges, fittings and assories like tees ,elbows ,collars,cowls ,ptraps,s traps ,door bends etc all complete for all depths as per direction of Engineer-in-charge. |
| 37 | PN-16 pipe , Above 20-25mm OD(SDR-7.4) |
| 38 | PN-16 pipe , above 25 mm -32mm OD(SDR-7.4) |
| 39 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 40 | C.P. BRASS FITTINGSProviding and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 41 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 42 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 43 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC mediumpipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings and assories like tees ,elbows ,collars,cowls ,ptraps,s traps ,door bends etc all complete for all depths as per direction of Engineer-in-charge. |
| 44 | 75 mm nominal size dia |
| 45 | 100 mm nominal size dia |
| 46 | Providing and fixing water closet squatting pan (Indian type W.C. pan/European as required ) as desired with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. |
| 47 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls whereverequired : ,White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 48 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 49 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 50 | Dry random rubble masonry with hard stone in foundation and plinth: With bond stone |
| 51 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m -All kinds of soil. |
