Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push,6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½\" deep for walls and 3\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point)and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-Wiring fan point (Without fan box) |
| 2 | Wiring light point |
| 3 | Wiring call-bell point |
| 4 | Wiring 6Amp. Plug control comprising wall socket point |
| 5 | Wiring 16/20Amp. power plug control point |
| 6 | RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):Wiring AC supply terminal point having1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height. |
| 7 | RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPEWIRING SYSTEM WITH MODULAR ACCESSORIES):Wiring Computer terminal point having 3 Nos. 6Amp. 2/3 universalsocket (shuttered), 1No. 16 Amp. switch with indicator and 1No. blanking plate (Modular accessories). |
| 8 | Supply and erection of Miniature Circuit Breaker MCB\"s for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specificationsincluding connections with suitable size of thimbles/lugs:-MCB Single Pole 6-32amp. (10kA, Curve-C) |
| 9 | MCB Single Pole 40amp. (10kA, Curve-C) |
| 10 | Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mountingminiature circuit breakers/ RCBO\"s/ RCCB\"s in the distribution board (For SP&Ndistribution board with provision DP MCB\"s/ RCCB\"s/ RCBO\"s as incomer and SP MCB\"s as outgoings and for TP&Nhorizontal distribution board with provision TPN/ FP MCB\"s/ RCCB\"s/ RCBO\"s as incomer and SP MCB\"s as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-SP&N Double Door Distribution Board 16 way each |
| 11 | Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet boxof suitable size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:-Automatic Voltage Stablizer 2 KVA |
| 12 | Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-Overall size 1sq.mm (Un-sheathed) |
| 13 | Overall size 1.5sq.mm (Un-sheathed) |
| 14 | Overall size 2.5sq.mm (Un-sheathed) |
| 15 | Supply and erection ofOn Load Change over Switch with advance neutral UNIT in sheet enclosure on the existing surface. (Confirms to IS 13947 (Part-3). complete with G.I. Bolts, Nuts etc. according to the size of holes in the body of the enclosure & Connections on both sides of switch with suitable size of thimbles as per PWD General Specifications:-On Load Change Over Switch Four Pole 63amp., 415volts (With Sheet Enclosure) |
| 16 | Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-Cable Tray Size 150mm x 50mm x 50mm (2mm thick) |
| 17 | Erection of Ceiling/ Cabin/ Exhaust fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75sq.mm complete:-Erection of Ceiling fan |
| 18 | Erection of Cabin fan on the wall |
| 19 | Erection of Exhaust fan with louver shutter on the wall/ window grill |
| 20 | S/E of Automatic Waterlevel controller. |
| 21 | S/E of Exhaust fans 12\" as desired by engineer in charge |
| 22 | S/E of LED Batten Light of 40W as desired by engineer in charge. |
| 23 | S/E of LED 100W Flood Light type as desired by engineer in charge. |
| 24 | S/E of Concealed lights 10W as desired by engineer in charge. |
| 25 | Waiting Area chair 3 seater- Supplying & Placing three seater bench. The seat and back shall be made up of high quality cold rolled MS perforated sheet of 1.2mm thick, pressed and welded to form the shape. The seat and back electrostatically coated with epoxy powder and then cured under heat to allow it to form a skin. The armrest shall be made up of mild steel powder coated tube with 1.2mm thick. The base structure shall be supported by MS powder coated with 40-60µ (DFT). There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 440±10 mm(D) X 405±10 mm(H) from ground. Overall height shall be = 775±10 mm, overall depth = 710±10 mm & overall width = 1765±10 mm. |
| 26 | Waiting Area chair 2 seater - Supplying & Placing two seater bench. The seat and back shall be made up of high quality cold rolled MS perforated sheet of 1.2mm thick, pressed and welded to form the shape. The seat and back electrostatically coated with epoxy powder and then cured under heat to allow it to form a skin. The armrest shall be made up of mild steel powder coated tube with 1.2mm thick. The base structure shall be supported by MS powder coated with 40-50µ (DFT). There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 450±10 mm(D) X 430±10 mm(H) from ground. Overall height shall be = 775±10 mm, overall depth = 710±10 mm & overall width = 1180±10 mm. |
| 27 | Chair for Reception- Providing and supplying medium back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of 15mm thick hot pressed commercial plywood padded with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ in seat and 40mm thick having density 40Kg/m³ in back. The same shall be upholstered with fabric tapestry 1mm thick and 300 GSM. The back and base of the chair shall be supplied with polypropylene bead on edges and the backrest shall be made by keeping the natural curvature of the spine with back support. The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine and the armrest shall be made of black integral metal insert polyurethane arm completely joint with seat and back. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standard. The pedestal should have five legged injection moulded in black 30% glass filled nylon having pitch circle Dia. 650±15 mm and fitted with 5 nos. twin wheel castors. The castors of the chairs should be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA X5.1-2011 standard tested to perform 98,000 cycles with 250lbs load.The seat size shall be 460±10 mm(W) X 450±10 mm(D) and back size shall be 460±10 mm(W) X 400±10 mm(H) from seat. Seat height = 460±10 mm, overall height shall be = 810±10 mm. |
| 28 | Doctor Table- Supplying & Placing executive table with credenza unit in completely knock down conditions with an overall size 1600mm X 1600mm X 750mm that is to be assembled at site. The worktop shall have the size 1950mm X 900mm made up of 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The top shall be supported on CRCA powder coated rectangle pipe having cross-section area 40mm X 20mm with 1.6mm thick. The table shall be clad with 1mm thick modesty panel which provide structural support for the table. It should be 1mm thick with star perforation CRCA powder coated sheet in linear shape. The understructure shall consist of loop leg and C-type leg made up of CRCA powder coated triangular shape pipe having cross-section area 53mm X 53mm X 75mm with 1.6mm thick. There shall be shoe provided at the base to avoid scratches on the floor. Side top shall be provided with an overall size 800mm X 500mm X 750mm made up of 25mm thick Pre-laminated particle board of grade II of IS 12823. It shall be supported on peg which is mounted on credenza unit. The credenza unit shall have overall size 1400mm X 575mm X 500mm. It should be made up of Pre-laminated particle board of grade II of IS 12823 with drawer base 9mm thick and other parts 18mm thick like shutter, back, facia, side panel etc. It shall have 2 box drawer, 1 filing drawer and 1 shutter. The drawer shall be operated with roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The shutter shall be operated by SS handle and concealed crank hinge. The credenza unit shall be mounted over CRCA powder coated U shape leg having cross-section area 53mm X 53mm x 75mm with 1.6mm thick. All the size shall have the tolerance of upper and lower deviation of ±10mm for board & ±0.2mm for metal. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. |
| 29 | Stool for Doctor, Pharmacist Room & in SamplingRoom - Revolving Stool, SS Top, Powder Coated, Height Adjustable (510mm - 690mm). |
| 30 | Storage for Medicine - Providing, supplying and placing steel almirah. The overall size of the Almirah shall be 915mm (W) X 485mm (D) X 1980mm (H). The Almirah shall be supplied with 2 nos. of glass doors with4 nos. of adjustable shelves i.e. 5 loading compartments.The glass used shall be 4mm thick clear. The shelves shall have folded constructions which have intrinsic rigidity andhigh load carrying capacity. Uniformly distributed load capacity of each shelf shall be 40 Kg maximum. Each rack shall be provided with stiffener at bottom for strength. The entire body panel and shelf shall be made of high yield strength 0.8mm thick and door 1mm thick CRCA sheet of grade ‘D’ confirming to IS: 513. The complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50µ thick. |
| 31 | Customized Lab Table- Supplying & placing storage unit with an overall size 1800mm X 600mm X 900mm. It should be made up of Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The top of the shutter shall be 25mm thick and all other profile i.e. side, back, shutter, skirting shall be 18mm thick and the edges shall be sealed with thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The storage shall have 2 nos. of adjustable shelf and 4 nos. of sliding shutters shall be provided for ease of opening. The sliding shutter shall be operated on sliding rail track and SS handle as well as push lock mechanism. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. There shall be buffers provided at the bottom to avoid scratches on the floor. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The boards used should meet international standards of quality and safety, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of elasticity bending tested as per IS 2380. |
| 32 | Main chair for Doctor- Providing and supplying a high back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of 15mm and 12mm thick hot pressed commercial plywood padded with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ in seat and 40mm thick having density 40Kg/m³ in back. The seat and back shall be upholstered with fabric tapestry 1mm thick and 300 GSM. The back and base of chair shall be supplied with polypropylene bead on edges and the backrest shall be made by keeping the natural curvature of the spine with full back support. The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine and the armrest shall be made black integral polypropylene arm mounted on powder coated round pipe frame completely joint with seat and back. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment which provides back strength for the chair. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal should be five legged injection moulded in black 30% glass filled nylon having pitch circle dia. 700 mm fitted with 5 nos. twin wheel castors. The castors of the chairs should be injection moulded in black 30% glass filled, confirming to ANSI/BIFMA Standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 470±10 mm(W) X 460±10 mm(D) and back size shall be 460±10 mm(W) X 610±10 mm(H) from seat & overall height = 1050±10 mm. |
| 33 | Visitor Chair for Doctor- Providing and supplying a visitor chair with ergonomic design, user comfort & aesthetically appealing. The seat and back shall be made of 15mm thick hot pressed commercial plywood padded with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ in seat and 40mm thick having density 32Kg/m³ in back. The same shall be upholstered with crape fabric tapestry 0.6mm thick and 235 GSM. The seat and back of chair shall be supplied with polypropylene beam on edges and the backrest shall be made by keeping the natural curvature of the spine. The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine. The armrest shall be made of black integral polypropylene arm mounted on powder coated round pipe frame completely joint with seat and back. The frame structure shall be cantilever support type made up of MS CRCA powder coated round pipe of Dia. 25.4mm with 1.6mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor . The seat size shall be 480±10 mm(W) X 450±10 mm(D) and back size shall be 480±10 mm(W) X 400±10 mm(H) from seat & overall height = 820±10mm, overall depth = 600±10 mm. |
| 34 | Examination Table for Doctor Room -Two Section Top with Fix Mattress, Powder Coated, Overall Dimension - 1830mm X 560mm x 810mm |
| 35 | Provision for providing & installation of 3 fold screen MS frame with Curtain overall dimension 1675mm H x 2450mm L around Examination Table |
| 36 | Roller Blinds(170 sft *225/-) |
| 37 | Earth work in excavation in foundations trenches etc. inall kinds of soil where Pick-Jumper work is notinvolved and not exceeding 2.0 metres depth includingdressing of bottom and sides of trenches, stacking theexcavated soil clear from the edge of excavation andsubsequent filling around masonry in 15 cm, layers withcompaction including disposal of all surplus soil as directed within lead of 30 metres. |
| 38 | P/L CC1:8:16 WITH STONE BALLAST 40MM GAUGE |
| 39 | FIRST CLASS BB WORK IN CM1:5 F/P |
| 40 | FIRST CLASS BB WORK IN CM1:5 IN S/S |
| 41 | P/F CEMENT PLASTER CM 1:4 |
| 42 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 110mm o/d single socket SWR UPVC pipe lines laidcomplete |
| 43 | 75mm o/d single socket SWR UPVC pipe lines laid complete |
| 44 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. B) For 110mm o/d pipesii) Single Tee With Door |
| 45 | Door Elbow 90 Degree (All side socketed) |
| 46 | Coupler |
| 47 | P Trap/Floor Trap 110mmx 75mm |
| 48 | For 75mm o/d pipes Coupler (Description Changed) |
| 49 | Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm andchamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.100mm internalDiametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm |
| 50 | Construction of brick masonry inspection chambers size asgiven below upto 0.60 metre average depth in 1:5 cementsand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.((b)) 450mm x 600mm inside with 455mm x 610mm coverand frame light duty double seal |
| 51 | Providing and laying, jointing, fixing and testing ISI MarkeduPVC Pipe Lines as per ISI 4985-2000, including specialssuch as tees, bends, sockets, elbow etc., cutting, testing(including cost of specials) in the ground complete in allrespects. (B) uPVC Pipe 6 Kgf/cm2 (b) 50mm i/d |
| 52 | CONCEALED IN WALL:Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in-Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes &fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge(a) CPVC SDR 11 Pipe &fitting 16mm o/d |
| 53 | (b) SDR 11 CPVC pipes & fittings 20mm o/d |
| 54 | (c) CPVC SDR 11 Pipe & fitting25mm o/d |
| 55 | Cutting chase in brick walls in cement or in floor forembedding G.I. or C.I pipes line and making good thesame to its original condition ((a)) Size 75 mm x 75 mm |
| 56 | Cutting holes upto 23cm square through B.B. in cementwalls or stone masonary wall in cement for pipes, andmaking good the same & finishing according to existingfinish where required (b) Through wall22.86 cm thick |
| 57 | Providing, fixing and jointing G.I Union Couplings(ofapproved make with the approval EIC) as per IS 1879in G.I. Pipe lines complete in all respect.(a)) 15mm i/d G.I. Union |
| 58 | b)) 20mm i/d G.I. Union |
| 59 | c)) 25mm i/d G.I. Union |
| 60 | Painting G.I. Pipes and Specials with syntheticenamel Paint in all shades as per I.S.I. specification onexisting or new work, two coats paints including cleaningrubbing surface, etc. (a) 15mm & 20mm i/d G.I. Pipe |
| 61 | 25mm & 32mm i/d G.I Pipe |
| 62 | Providing and fixing in position Chinaware extended wall mounted E. W.C. type suite (size 66 x 46 x 77.5 cm ) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) with or without 10 ltr. chinaware matching flushing cistern and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.(a)) Chinaware extended wall mounted E W.C. with matching chinaware cistern and seat cover complete in all respect. |
| 63 | Providing and fixing jet spray with 2-6\" long PVC pipe.(b)) With PTMT nut |
| 64 | Providing and fixing in position vitreous Chinawarewhite lIndian make large flat back or angular lipped fronturinal 375 x 390 x 590 mm of approved make (to theapproval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete. |
| 65 | Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 66 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm longcomplete in all respect.(ii)) Size 550 mm x 400 mm x 1.00mm |
| 67 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mmcomplete in all respect. |
| 68 | Providing and fixing in position vitreous Chinaware white laboratory sinks of approved make (to the approval of Engineer-in-charge) consisting of a pair of brackets, C.P. brass waste 40mm completein all respect.Size470mmx370mmx180mm |
| 69 | Providing and fixing in position towel rails / ring ofapproved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. ((b)) C.P brass towel ring |
| 70 | Providing & fixing 15 mm C.P brass laboratory cock swanneck of approved make (to the approval ofEngineer-in-charge ) complete in all respect.((a)) Laboratory cock swan neck One Way |
| 71 | Providing & fixing in position PVC flexible tube connectionof approved make (to the approval of Engineer-in-charge ) complete in all respect. ((d)) PVC tube connection of size 15 mm x 375 mm with PTMT nut |
| 72 | Providing and fixing in position C.P. brass soap dishof approved make (to the approval of Engineer-in-charge ) fixed intowall with rawl plugs and C.P brass screws complete in allrespect. |
| 73 | Providing & Fixing in postion 15 mm i/d bib cock ofapproved make (to the approval of Engineer-in-charge )complete in all respect.((i)) C.P. brass Bib cock longnose/ long body foam flowwithout flange |
| 74 | ((ii)) C.P. brass Bib cock foam flow without flange |
| 75 | Providing & Fixing in postion stop cock / Angle valve ofapproved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 76 | ((c)) C.P.brass 15mm Angle valve without flange |
| 77 | Providing & Fixing in position 5mm thick bevelled edgemirror of superior glass (of approved make) completewith 4mm thick hard board backing fixed in with rawlplugs 50mm, C.P. brass screws and washers and S/SStuds on top complete in all respect (as required by theEngineer-in- Charge) ((a)) Size 600mmx450mm |
| 78 | Providing & Fixing in position C.P./Aluminium Khunti ofapproved make (to the approval ofEngineer-in-charge ) fixed into wall with C.P. brass screwsand rawl plugs etc. complete in all respect.((d)) Aluminium khunti with 3 pegs |
| 79 | Providing & Fixing in position C.P. Brass flange Dome ofapproved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. |
| 80 | Providing & Fixing in position C.P. Brass extension piece25mm long to 100mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect.(i)) C.P. Brass extension piece, 25mm long to 50mm long |
| 81 | Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect. (B)) C.P. Brass Accessories:(ii)) C.P brass towel ring square |
| 82 | Providing and fixing in position automatic brass BallCock in tanks. (B) Brass Ball Cock with rodand Plastic Ball ((iv)) 32mm i/d |
| 83 | Providing & placing in position on terrace (at all floor levels)HDPE water storage tanks of approved make (to theapproval of Engineer -in-charge) with cover withsuitable locking arrangement and making necessary holesfor inlet, outlet and over flo pipes but without fittings andbase support for tank. ((i)) Triple Layer Tanks |
| 84 | Providing and fixing in position G.I. Tank Nipple ofapproved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect. ((c )) G.I. tank nipple 25mm i/d |
| 85 | CONSTRUCTION OF RCC BBPLATEFORM ON ROOF FORHDPE WATER STOREAGE TANKS COMPLETE AS PERDRAWING & SPECIFICATIONS & AS DESIRED BYENIGNEER-IN-CHARGE |
| 86 | PROVIDING & INSTALLATION OF SS TABLE OF TOP SIZE 6\"-2\"X2\"-0\"X2\"-6\" HIGHHAVING PROVISION OF LAB SINK COMPLETE AS PERDRAWING & SPECIFICATIONS AS DESIRED BYENGINEER-IN-CHARGE |
| 87 | Base course of floor consisting of 100mm thick cementconcrete 1:8:16 with stone aggregate 40mm gauge and100mm fine sand filling using mechanical mixer for mixingof material |
| 88 | Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. |
| 89 | Providing and fixing 1st quality ceramic glazed walltiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved byEngineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment ofmatching shade complete. |
| 90 | Providing, laying in trenches to correct gradient andalignment and jointing of UPVC pipes having ISIspecification IS:15328-2003 class-SN-8 marked makeSupreme, Finolex, Kissan, Jain, Prince or equivalent goodon them and laying the samein trenches to correctalignment and gradients, cutting and jointing, testingfor water tightness and making good the leakages anddefects including cost of specials (Specials and Solventshould be of same make as that of pipes) complete in allrespects. (a) 110mm o/d pipe |
| 91 | Excavation in trenches with straight or open cutting instreets, lanes or in open area with 3D/JCB or excavator including manually dressing bed, trimming sides and side slopes for sewers and manholes to full depths as shown in drawings,including,dressing to correct sections and dewatering, provision fordiversion for traffic, protection of existing services i.e.telephone cables, electric lines, water supply lines andgas lines etc. night signals, profiles, pegs, sight rails,boning rods, watching, etc., fixing and maintenance ofcaution boards, fencing, refilling trenches, watering,ramming and restoration of surface to original level andremoval of surplus spoil from the site of works, upto onechain (15m) complete in all respects. (b) For depth exceeding 3.00 m but not exceeding 4.5 B.G.L (i) All kinds of soil except rocky |
| 92 | Providing and filling sand grading as per specificationsor fine grade around the various sizes of G.I. pipes inexternal work. |
| 93 | Extra for making connections of all sizes newly laid sewerswithin benching of fully charged sewers includingpluging of sewer, dewatering & desilting of manholes etc.complete in all respects.with existing sewer of300 mm id and below |
| 94 | Providing and fixing of FIRE EXTINGUISHER, ABC Powdertype (stored pressure) as per IS: 15683 complete with allaccessories as per Manufactures Specification.ISI Mark complete in all respect.(c) 6 Kg Capacity |
| 95 | Providing and fixing of FIRE EXTINGUISHER, CO2 type asper IS: 15683 complete with all accessories as perManufactures Specification ISI Mark complete in allrespect. (c) 4.5 Kg Capacity |
| 96 | PROVIDING & FIXING IN POSITION CP BRASS SPOUTOPERATED PILLAR TAP WITH BASE FLANGE (FOR FOOTOPERATED VALVE) OF APPROVED MAKE (TO THEAPPROVAL OF ENGINEER-IN-CHARGE)COMPETE IN ALL RESPECT 9INSTEAD OF PILLAR TAP INLABORATORY SUITES) |
| 97 | Dismantling glazed tiles (to be carefully removed). |
| 98 | Providing and laying vitrified floor tiles in different sizes inlight colour shades made using Full Body Technology(thickness to be specified by the manufacturer) with waterabsorption’s less than 0.08% and conforming to IS : 15622of approved make in all colours and shades, laid on20mm thick cement mortar 1:4 (1 cement: 4 fine sand),complete. ( Full body vitrified tiles have pigment in entirebody / thickness of tile which makes chips and scratchesless noticeable and make na ideal choice for high trafficzones.)Size 600x600 mm |
| 99 | Grouting the joints of flooring tiles having joints of 3 mmwidth, using 2mm to 3 mm gap using spacers and laterthis gap to be filled with cement based grout ) withCement base grout and matching pigments etc.,complete, including filling / grouting and finishingcomplete as per direction of Engineer-in-charge.(a) Size 600x600 mm. |
| 100 | Providing and Laying Tactile Flooring full body vitrified , low water absorption below 5%, having excellent slip resistance , very dense, durable and abrasion resistant, solid through colour, fade proof, highly chemical and stain resistance unglazed finish porcelain tile of size 300mm x 300mm x 10mm + 5mm thick, approved profile design, Tec-button/Tec-liner laid in ordinary grey cement and on 20mm thick bed of cement mortar 1:3 filling neat cement slurry between joints with White Cement containing pigment to match the shade complete in all respect. (Tile design and pattern will be as per guidelines issued for persons with disability) |
| 101 | Providing and Installation of Safety signage as perguideline for person with disability made of retroreflective sheeting as per colour specified and writing matter will be of same material in white fixed / pasted over 4mm thickaluminum composite sheet, including cost of writingmatter with braille also firmly fixed on wall with nylonfastener, brass screw and washer complete as perspecification and as desired by engineer in charge. |
| 102 | Marble stone flooring with 12-15 mm thick marble stone,as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing andpolishing complete with : ((v)) Pink plain marble Marble Tiles of various sizes 12mm to 15 mm thick ((vi)) Morwad marble Marble Tiles of various sizes 12mm to 15 mm thick ((b)) Slabs sizes above 0.50 sqm |
| 103 | Marble work of thickness 12-15 mm for wall lining(veneer work), backing filled with a grout of average 12mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade(To be secured to the backingby means of cramps, which shall be paid for separately).((iv)) Udaipur Green MarbleTiles of thickness 12mm to15mm ((b)) Slabs sizes above 0.50 sqm |
| 104 | Extra labour for projected nosing of stair case of anyshape and design. |
| 105 | PROVIDING AND LAYING 50MM WIDE ANTISKID TAPEMADE OF SLIP RESISTANT MATERAIL COLOURCONTRAST, EDGE STRIP, SELF ADHESIVE TO BE FIXED ONFRON EDGE OF STAIR TREADS OT HELP PEOPLEWITH VISUAL DISABILITY AND ELDERLY EVEN IN DIMLIGHT CONDITIONS & REDUCE THE RISK OFSLIPPING MAKE 3M OR EQUIVALENT BRANDCOMPLETE AS PER SPECIFICATIONS,HARMONISED GUIDELINES FOR PWD AND AS DESIREDBY ENGINEER-IN-CHARGE. |
| 106 | PROVIDING AND LAYING 25MM TO 50MM WIDE HAIGHINTENSITY REFLECTIVE CONSPICUITY TAPE COLOURCONTRAST, EDGE STRIP, SELF ADHESIVE TO BE FIXED ONFRONT EDGE OF STAIR RISER TO HELP PEOPLE WITHVISUAL DISABLITY AND ELDERLY EVEN IN DIM LIGHTCONDITIONS & REDUCE THE RISK OF SLIPPING MAKE 3MOR EQUIVALENT BRAND COMPLETE AS PERSPECIFICATIONS, HARMONISED GUIDELINESFOR PWD AND AS DESIRED BY ENIGNEER-IN-CHARGE. |
| 107 | Dismantling brick work tile, masonry or tile lining In cement |
| 108 | 20mm thick cement plaster 1:4 in two coat work |
| 109 | Providing and fixing partition 74 mm overall thickness partition upto ceiling height consisting of G.I. frame and with 12 mm thick double BISON Board including providing and fixing of frame work made of special section power pressed/ role form G.I. sheet with zinc coating of grade 175 consisting of floor and ceiling channel 50mmwide having equal flanges of 32mm and 0.5mm thick fixedto the floor and ceiling at the spacing of 610mm centre tocentre with dash fastener of 12.5mm dia-meter,40mmlength and the studs 48mm wide having one flange of34mm and other flange 36mm and 0.50mm thick fixedvertically within flanges of floor and ceiling channel andplaced at a spacing of 610mm centre to centre by 6mm diabolts and nuts at both ends of partition fixed flush to wallwith rawl plugs at spacing 450mm centre to centre andfixing of boards to either side of frame work by 25mm driveall screws on studs, floor and ceiling channels at the spacingof 300mm centre to centre, including jointing and finishingto a flush finish with recommended jointing compound, jointing tape, joint finisher and two coats of primer suitable for board as per manufacture’s specificatiorand direction of engineer-in-charge allcomplete. |
| 110 | PROVIDING & FIXING 14.71 6,247.53 Sq.Mtr 91,901.17WOODEN PARTITION AHVINGINTERNAL FRAME WORK OFSAL WOOD SECTION 50MM X50MM, 6MM THICKWATERPROOF PLY ON BOTHSIDES FINISHED WITH 1MMTHICK MICA COMPLETE ASPER ARCHITECT DRAWING &AS DESIRED BYENIGNEER-IN-CHARGE |
| 111 | PROVIDING & FIXING WOODEN FRAME /CHOWKHAT FOR DIXED GLAZING & DOOR CHOWKHATHAVING SAL WOOD SECTION 50MM X 50MM, 6MM THICKWATERPROOF PLY ON BOTH SIDES FINISHED WITH 1MMTHICK MICA COMPLETE AS PER ARCHITECT DRAWING &AS DESIRED BY ENIGNEER-IN-CHARGE |
| 112 | Factory manufactured flush door fixed in position ironhinges, etc (excluding the cost of any fittings other thanspecified above but including labour for fixing the same inposition (Code : II Revision IS-2191 Part-I) 1973 ((a)) Commercial with elm or gurjan facing on both \ Sides with laminated core andlipped edges:- ((iv)) 35mm thick |
| 113 | Providing & Fixing decorative high pressure laminated sheet1mm SF thick with high density protective surfacelayer and reverse side of adhesive bonding qualityconforming to IS : 2046 Type S, including cost of adhesiveof approved quality. |
| 114 | Cost of aluminum fittings complete for doors, windowssuch as tower bolts, handles,Stoppers and screwetc. for these fittings (Excluding sliding bolt) ((i)) For shutter area up to 0.50 sqm |
| 115 | Providing & Fixing glass panes with nails and putty orwooden strip complete in all respect((b)) Glazing area above 0.09sqm((iii)) 5.0mm thick Plate glass INDIAN |
| 116 | PROVIDING, FIXING GLASS FROSTED FILM ON GLASSEXISTING FIXED AT SITE COMPLETE AS PERSPECIFICATION & AS DESIRED BYENGINEER-IN-CHARGE. |
| 117 | Providing and fixing hydraulic door closer ISI mark withnecessary screw etc. complete ((c)) I.S.I Designation No. III (size of door 851mm to 1000mm) |
| 118 | Supplying Pressed steel sheet frames (chowkhat) consistingof 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality,fixed in position excluding the cost of cement concrete 1:3:6for fillings in the frame and cement concrete 1:2:4 forlugs complete ((c)) Doors and windows frame of size 151mm x 60mmwith 35 mm wide double rebate weighing 3.95 kg permeter. |
| 119 | Providing & fixing of Box type steel windows, made ofvarious ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, forshutter 50mm x 20mm having thickness of 1.25mm(18 gauge), shash bar MS Tee 25mm x 3mm where requiredjoints mitered and electrically flash-welded, with iron fittingsincluding necessary iron handles, hinged cleat, towerbolts, iron hold fast and pintle hinges complete (excluding glazing and wire gauge) and finished with ready mixedpaint red lead non setting primer complete as perspecification, Drawings and to the entire satisfaction ofengineer-in-charge. (Note:- Glazing, wire gauge and grillwill be paid as per respective items) |
| 120 | Wrought iron & Mild steel ladders, framed grills, gratingsetc. with ends of bars riveted or molded forged framedwindow guards, barred iron doors stair case iron railingetc. including cost of bolts and nuts, screws, welding rodcomplete fixing in position |
| 121 | Extra for providing & fixing Steel beading of approvedshape steel tube beading size 12mm X 12mm, 18 gauge ofapproved shape and section with screw for fixing of glasspanes instead of glazing clips and metal slash putty in steeldoors , windows & Ventilators complete in all respect |
| 122 | Supplying and fixing glass panes with glazing clips andspecial metal sash putty of approved make.((b)) Glass panes 4mm or 10.75 kg / sqm exceeding 0.4sqm of area |
| 123 | Providing and fixing Brass 100mm mortice latch and lockwith 6 levers without pair of handles (best make ofapproved quality) for aluminum doors includingnecessary cutting and making good etc. complete.(CHAPTER NO. 17-17.22 (V)- PROVIDING AND FIXINGBRASS 100MM MORTICE LATCH AND LOCK WITH 6LEVERS WITHOUT PAIR OF HANDLES (BEST MAKE OFAPPROVED QUALITY) FOR ALUMINUM DOORSINCLUDING NECCESSARYCUTTING AND MAKING GOOD ETC. COMPLETE. |
| 124 | Providing and fixing beading to door and windowschowkats of commercial hard wood, such as Hollock,Champ, Chirassy Chaplash etc (Non coniferous timber otherthan teak conforming to ISI specification no 100., kilnseasoned) with iron screws, fixed in position complete asper design and shape required ((a)) 50mmx12mm |
| 125 | PROVIDING AND FINISHING OF BEAQDING SECTION50MMX12MM WITH ENAMEL PAINT TWO COAT WORKWITH ONE COAT OF PRIMER INCLUDING PREPARATIONO0F SURFACE COMPLETE AS PER SPECIFICATIONS AND ASDESIRED BY ENGINEER-IN-CHARGE |
| 126 | Providing and fixing SS Braile indicators of size 170mm x35mm to be fixed on handrails of the the approved designand make having Braile dots raised 0.5mm above baseplate, to the installed at the specified locations as per thedirections of the Engineer-in-Charge completes per design/specifications and guidelines as per theentire satisfaction of the Engineer-in-Charge |
| 127 | Providing and fixing mineral fibre false ceiling tiles atheight upto 4 mtr of size 595X595mm of approvedtexture, design and pattern. The tiles should haveHumidity Resistance (RH) of 99%, Light Reflection > 85%,Thermal Conductivity k = 0.052 - 0.057 w/m K, FirePerformance as per (BS 476 pt - 6 &7)in true horizontallevel suspended on interlocking T-Grid of hotdipped all round galvanized iron section of 0.33 mm thick(galvanized @120 gsm) comprising of main T runners comprising of main T runners of 15x32 mm of length 3000mm, cross T of size 15x32mm of length 1200 mm andsecondary intermediate cross T of size 15x32 mm of length600 mm to form grid module of size 600x600 mmsuspended from ceiling using galvanized mild steel item(galvanised@80gsm) 50 mm long 8mm outer diameter M-6dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre tocentre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. (i) With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) size 595x595 mm |
| 128 | Scraping - White wash and colr wash |
| 129 | PAINTING TWO OR MORE COATS EXCLUDING PRIMINGCOAT WITH SYNTHETIC ENAMEL PAINT IN ALLSHADES ON WOOD WORK, METALLIC OR PLASTERED,CONCRETE SURFACE TO GIVE AN EVEN SHADE. INCLUDINGPRIMING COAT & PREPARATION OF SURFACE |
| 130 | Distempering with Acrylic washable oil bound distemper(of approved manufacture) two or more coats over onepriming coat to give an even shade |
| 131 | Applying priming coat with metal primer on new steel oriron work including preparation of surface. |
| 132 | Painting two or more coats excluding priming coat withsynthetic enamel paint in all shades on wood work,metallic or plastered, concrete surface to give an even shade. |
| 133 | REMOVAL OF EXISTINGDAMAGED FURNITURE & ITSCARRIAGE UPTO SITE PROVIDED BY ADMINISTRATION INCLUDING DISPOSAL OF MALBA FROMDISMENTLING |
| 134 | Providing & fixing ACP Sheets of various thickness HighClass ISI marked complete in all respect as per thedirections of Engineer-in-charge.((iii)) 3mm thick ACP Sheet |
| 135 | DISMENTLING OF EXISTING ACP SHEET TO BE REMOVEDCAREFULLY SO THAT BASED FRAME SHOULD NOT BEDAMAGED |
| 136 | Cautionary sign board 900x900x900mm triangularas per IRC 67- 2012 with high intensity Microprismaticgrade retro reflective Sheeting as per ASTM D 495609 and as per IRC 67 2012 fixed over 4mm thickaluminum Composite material (ACM) sheeting havingaluminum skin thickness of 0.4 to 0.5 mm on both sidedand fixing the same with suitable size aluminum alloyrivets @ 200 mm c/c to back support frame of 25x25x3mmangle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.75m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as perclause 6.9 of IRC 67-2012 for retro reflective sheeting & acertified copy of test reports from an independent testlaboratory conforming to clause 6.7 of IRC 67-2012 .((a)) Using high intensity Microprismatic grade retroreflective Sheeting Type XII as per ASTM D 4956 09 andas per IRC 67 2012 |
| 137 | PROVIDING AND FIXING NAME PLATES OF VARIOUSSIZES MADE OF PVC SHEET PRINTED WITH SELFADHESIVE TAPE PASTED ON SUNBOARD AS DESIRED BYENGINEER-IN-CHARGE |
| 138 | PROVIDING AND FIXING PUNJAB STATE MOHALLACLINIC LOGO |
| 139 | Taking out existing CC interlocking paver blocks fromfootpath/ central verge/pavement, includingremoval of rubbish etc., disposal of unserviceablematerial to the dumping ground, for which paymentshall be made separately and stacking of serviceablematerial within 50 metre lead as per direction ofEngineer-in-Charge. |
| 140 | Cement concrete 1:8:16 With stone aggregates40mm gauge (CHAPTER NO. 10-10.6-b-) PROVIDING AND LAYING1:8:16 STONE BALLAST |
| 141 | Providing and laying 60 mm thick factory made cementconcrete interlocking paver block of M-35 grade machinemade rubber moulded smooth finish with strong vibratoryprocess or with vibrohydraulic compaction machineand of approved size and design / shape laid inOrdinary Grey and pattern over and including 40 mmthick compacted bed of coarse sand, filling the joints withfine sand etc, all complete as per directions ofEngineer-in-Charge IS Code 15658(2006) for Non trafficAreas and streets having width less than 3.05 mt.( Alsonot to used over footpaths). |
| 142 | Extra Cost for using darker fast shade for interlockingpavers Tiles of any shape & thickness instead of greycolours. |
| 143 | COST OF NEW TILE TO BE REPLACED INSTEAD OFBROKEN TILES IN REGARDING OF TILETERRACING INCLUDING LOADING / UNLOADING & ALLLEADS AS DESIRED BY ENIGINEER-IN-CHARGE |
| 144 | Cement concrete 1:2:4 gola 10cm x 10cm concavequadrant along junction of roofs with parapet wall fi |
| 145 | Top Khurra 0.6mx0.6m for rain water pipe in 25mm thickcement concrete 1:2:4 over 50.00 thick cement |
| 146 | Providing and fixing in position gratings 150mm x150mm for gully trap. PVC grating (P.T.M.T.) |
| 147 | Dismantling brick or flagged stone flooring withoutconcrete base. |
| 148 | Providing and Laying Out Door precast designer chequeredtiles of any size & any shape 25mm thickness having top layer of white cement mixed with pigment, laid on 20mmthick bed of ordinary cement mortar 1:3 (1 ordinarycement: 3 fine sand), joints grouted with white cementslurry containing pigment to match the shade complete inall respect as per specifications and to theentire satisfaction ofengineer-in-charge. |
| 149 | Renewing glass panes with putty and nails wherevernecessary ((b)) Glass panes weighing 10.75 Kg/sqm |
| 150 | Providing and fixing at site the Reception Table plandimensions as 5’-6” x 4’6” and height 2’-3” with storage,drawers, space for legs, etc complete as per drawing. Thetable should be sturdy and stable and will comprise ofknot-free teak wood, wherever required, 19mm/12mm/ 6mm water proof ply and 1mm laminates of Makeand Colour to be approvedby Architect/ Engineer-in-charge.The item also includes hardware such as drawerchannels, handles, etc of make and design to beapproved by Architect/ Engineer-in-charge. The itemalso includes all types of consumables such as nails,screws, fevicol, tape, etc and polishing, if required.Grooves,wherever required as per drawing, are also included inthe item.complete as per drawing/design as desired byEngineer-in-Charge. |
| 151 | Construction of embankment with good quality earthobtained from borrow pits including compensation ofearth, loading, unloading, carriage to site of work,spreading, grading to required slope and compacting to meet requirement of table 300-2 as per technical clause 305 ofMORT&H specifications |
| 152 | Cement concrete 1:5:10 ((b)) With stone aggregate40mm gauge (ii) mixing by mechanical means using concrete mixervolumetric type |
| 153 | First class burnt brick laid in cement sand mortar 1:6 infoundation and plinth |
| 154 | Earth work in excavation in foundations trenches etc. inall kinds of soil where Pick-Jumper work is notinvolved and not exceeding 2.0 metres depth includingdressing of bottom and sides of trenches, stacking theexcavated soil clear from the edge of excavation andsubsequent filling around masonry in 15 cm, layers withcompaction including disposal of all surplus soil as directedwithin lead of 30 metres. |
| 155 | Base course of floor consisting of 100mm thick cementconcrete 1:8:16 with stone aggregate 40mm gauge and100mm fine sand filling using mechanical mixer for mixingof material |
| 156 | 20mm thick cement plaster 1:4 in two coat work |
| 157 | Dismantling brick or flagged stone flooring withoutconcrete base. |
| 158 | Providing and Laying Out Door precast designer chequeredtiles of any size & any shape 25mm thickness having toplayer of white cement mixed with pigment, laid on 20mmthick bed of ordinary cement mortar 1:3 (1 ordinarycement: 3 fine sand), joints grouted with white cementslurry containing pigment to match the shade complete in all respect as per specifications and to the entire satisfaction ofengineer-in-charge |
| 159 | Providing and laying 60 mm thick factory made cementconcrete interlocking Paving blocks of M-35 grademanufactured by block making machine equippedwith steel mould clamped to a strong vibratory table withhydraulic pressure for compaction of concrete as perIRC SP 63 -2014 and of approved size and design /shape laid in Ordinary Grey Colour and pattern over andincluding 40 mm thick compacted bed of coarsesand, filling the joints with fine sand etc, all complete asper directions of Engineer-in-Charge. |
| 160 | Extra Cost for using darker fast shade for interlockingpavers Tiles of any shape & thickness instead of greycolours. |
| 161 | Providing & fixing 16 gaugebstainless steel pipe railing ofgrade 304 duly fixed on stepsbwith the help of bolts groutedon steps with hand rail andbnewel post of 50mm diaStainless steel pipe, Balustersbof 40mm dia Stainless steelpipe and guard 3 Nos of 15mm dia Stainless Steel pipecomplete in all respect |
| 162 | PROVIDING AND FIXING WOODEN PARTITION HAVINGINTERNAL FRAME WORK OF SAL WOOD SACTION50MMX50MM 6MM THICK WATER PROOF PLY ON BOTHSIDE FINISH WITH 1MM THICK MICA COMPLETE ASPER ARCHITECTURE DRAWING AND DESIRED BYENIGNEER-IN-CHARGE |
| 163 | Finishing walls with Premium Acrylic smooth exterior paintwith silicon additives of required shade with two ormore coats applied @ 1.43litre/10 Sqm over andincluding base coat of water proofing Cement Paint applied@ 2.20 Kg/10 Sqm |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
