Rural Engineering Services-RES has published Tender For Construction Of Block Building And Boundary Wall At Lamgara, District-Almora. Submission Date for this Tender is 27-12-2022. Building Work Tenders in Almora Uttarakhand. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Earth work in excavation by mechanical / manual means in foundation trenches or drains i/c lift upto 1.5m, i/c disposal of surplus excavated soil within a lead of 50 m. |
2 | Filling available excavatedearth in trenches,plinth inlayers consolidatingbyramming andwatering, leadup to 50 m and lift upto 1.5 m. |
3 | P/L in position CC 1:4:8(1 Cement:4 c/sand : 8st.agg. 40 mm size) excluding the cost of c/shuttering - All work upto plinth level. |
4 | P/L in position RCC 1:1.5:3(1 cement: 1.5 c/sand : 3 stone agg. 20 mm size) ex. the cost of c/shuttering, finishing and reinf. - All work upto plinth level (in foundation). |
5 | RCC work 1:1.5:3 (1 cement: 1.5 c/sand :3 stone agg. 20 mm size)in walls (any thickness), all work above i.e. columns,etc. ex. cost of c/shuttering, finishing and reinf. |
6 | RCC work 1:1.5:3 (1 cement: 1.5 c/sand :3 stone agg. 20 mm size)beams,s/shades,shelf ,stair case,door bend and suspended slabs etc. ex. cost of c/shuttering, finishing and reinf. |
7 | Centering and shuttering i/c strutting, propping etc. andremoval of form for Foundations, footings, bases of columns etc. for mass concrete. |
8 | Centering and shuttering i/c strutting, propping etc. andremoval of form for Suspendedfloors,roofs,landings,balconiesandaccess platform. |
9 | Centering and shuttering i/c strutting, propping etc. andremoval of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
10 | Centering and shuttering including strutting, propping etc. and removal of form for :Stairs, (excluding landings) except spiral-staircases |
11 | Centering and shuttering i/c strutting, propping etc. andremoval of form for Columns, Pillars, Piers, Abutments, Posts and Struts. |
12 | ReinforcementforR.C.C.worki/cstraightening,cutting,bending, placing in position and binding all complete --TMT -bars. |
13 | Brick work with F.P.S. bricks of class designation 75 in foundationand plinth in cement mortar 1:6 (1 cement : 6 c/sand). |
14 | Brick work with F.P.S. bricks of class designation 75 in super structure above plinth level upto floor V levelin cement mortar 1:6 (1 cement : 6 c/sand). |
15 | Half brick masonry with F.P.S. bricks of class designation 75 insuper structure above plinth level upto floor V level in cement mortar 1:4 (1 cement :4 c/sand) |
16 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) |
17 | Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading |
18 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
19 | Structuralsteelworkriveted,boltedorweldedinbuiltup sections,trussesandframedwork,i/ccutting,hoisting,fixing in position & applying a priming coat of approved steel primer all complete. |
20 | P/FM.S.Tubularframesfordoors,windows,ventilatorsandcupboardwithL-Typesectionmadeof 1.60mmthickM.S.Sheet,jointsmitredandweldedandgrindedfinish profilesrequiredsizewith15x3mmlugs10cmlongembeddedin CCblocks15x10x10cmof1:3:6 necessary butt hinges and screws and applying a priming coat of approved steel primers. |
21 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size,well rammed and consolidated and grouted with fine sand, including ecessary excavation, levelling & dressing & finishing the top smooth. |
22 | CC pavements 1:2:4 (1 cement: 2 c/sand: 4 stoneagg. 20 mm size) i/c finishing complete. |
23 | P/F glass strips in joints of terrazo/CC floors. -- 40 mm wide and 4 mm th. |
24 | Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) Udaipur green marble |
25 | Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. |
26 | 12 mm cement plaster of mix. 1:6 cement and coarse sand mortar. |
27 | 12 mm cement plaster of mix. 1:3 cement and coarse sand mortar. |
28 | 15 mm cement plaster of mix. 1:6 cement and coarse sand mortar in rough side of brick wall . |
29 | Distempering with oil bound washable distemper of app.brand (two or more coats) to give an even shade on new work over and i/c priming coat with cement primer. |
30 | Providing and applying white cement based putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete. |
31 | Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
32 | PaintingwoodworkwithDeluxeMultiSurfacePaintofreq. shade (Twoor more coats) applied over an under coat of primer approved brand. |
33 | PaintingSteel workwithDeluxeMultiSurfacePaintofreq. shade (Twoor more coats) applied over an under coat of primer approved brand. |
34 | P/F 4mm thick float glass panes with putty & nails. |
35 | Providing and fixing aluminium sliding door bolts, ISI markedas per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm |
36 | Providing and fixing aluminium tower bolts, ISI marked, anodisedas per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 300x10 mm |
37 | Providing and fixing aluminium handles, ISI marked, as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 125 mm |
38 | Providing and fixing aluminium hanging floor door stopper, ISI marked,as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper |
39 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats |
40 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm 12.5 mm thick tapered edge gypsum moisture resistant board |
41 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming toIS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes.110 mm diameter |
42 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointingCoupler 110 mm |
43 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointingBend 87.5°110 mm |
44 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointingShoe (Plain)110 mm |
45 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm |
46 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. |
47 | 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : (1 cement: 4 coarse sand) |
48 | P/L Ceramic glazed floor tiles 300x300 mm 1stquality ofapprovedmake in colourssuch asWhite, Ivory,Grey,FumeRedBrown,laidon20mmth.cementmortar1:4(1 Cement: 4c/sand)i/cpointingwithwhitecementand pigment etc. |
49 | P/F 1stqualityceramicglazedwalltiles ofapprovedmake in all colours, shades except burgundy, bottle green, black of anysize in skirting, risersofstepsand dados over 12 mm th. bed of cement mortar 1:3 (1 cement : 3 c/sand)and jointingwith greycementslurry i/cpointingwithwhite cementand pigment. |
50 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) in all colours and shades,laid on 20mm thick cement mortar 1:4 Size of Tile 600x600 mm |
51 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer),in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 Size of Tile 600x600 mm |
52 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design..With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
53 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws,joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm)Extruded section profile size 48x40 mm |
54 | 30 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides.The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. |
55 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
56 | Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
57 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern,with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS :2556, C.I. trap with outlet grating and other couplings in C.P. brass,including painting of fittings and cutting and making good the walls and floors wherever required : :Range of Two half stall urinals with 5 litre P.V.C. automatic flushing cistern |
58 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device |
59 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter |
60 | Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
61 | Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
62 | Providing and fixingmirror of superior glass of ractengular shape (Approved Quality) size435x357 |
63 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per with C.I. brackets and stainless steel plug 40 mm,510x1040 mm bowl depth 200 mm |
64 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank,with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes |
65 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps,i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 15 mm dia nominal bore |
66 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.20 mm dia nominal bore |
67 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal bore |
68 | Providing and fixing PTMT grating of approved quality and colour.Circular type100 mm nominal dia |
69 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.15 mm nominal bore with 45 cm length |
70 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe 32 mm dia |
71 | Providing and fixing brass bib cock of approved quality :15 mm nominal bore |
72 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
73 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality 15mm nominal bore |
74 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .With float glass panes of 8 mm thickness |
75 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections Powder coated aluminium |
76 | Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 |
77 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern |
78 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement |
79 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete Second class teak wood 35 mm thick shutters |
80 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners,all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece |
81 | Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)With 20x20 mm square bar |
82 | Excavation in hilly area in soil by manual means i/c cutting and timbering of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20m. |
83 | P/L of dry rubble stone flooring complete as directed by Engr. - in - charge. |
84 | Excavation in foundation for retaining & breast walls in alltypes of soils and rocks i/c lead, lift and disposal of surplus material. |
85 | Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc. |
86 | H.P.Stone filling behind retaining wall/breast wall in back of walls i/c supply of all materials, labour T&P etc. required for proper completion of work. |
87 | RR stone masonary laid dry in breast wall, retaining wall i/c supply of all materials,labour etc. complete. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail