|
| 1 | Taking down cement plaster on brick/concrete surfaces of walls and ceiling including racking out jointing hacking for key, scrubbing down with water etc.Complete all as specified and as directed. |
| 2 | Taking down chowkhats including shutterrs (without taking off shutters from the frame) exc 1.5 sqm and n.exc 4 sqm each .Complete all as specified and as directed. |
| 3 | Taking down chowkhats including shutterrsn exc 1.5 sqm.Complete all as specified and as directed. |
| 4 | Dismantling water tanks of capacity exc 250 Litres & not exc 500 litres and removing to store.Complete all as specified and as directed. |
| 5 | Demolition of RCCof any description specifically provided for.Complete all as specified and as directed. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.Complete all as specified and as directed. |
| 7 | Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for.Complete all as specified and as directed. |
| 8 | Dismantling wrought iron or mild steel work of any description not otherwise provided.Complete all as specified and as directed. |
| 9 | Dismantling of Boarding, any description and any position, fixed with Nails, complete all as specified and as directed. |
| 10 | Taking up or down steel tubing of size 15 mm and connections, including cleaning for refixing or removal to store.Complete all as specified and as directed. |
| 11 | Taking up or down steel tubing of size 20 mm and connections, including cleaning for refixing or removal to store.Complete all as specified and as directed. |
| 12 | Dismantlingof wall & ceiling Boards (fibre,pulp,insulation etc. ),or insulation board/slabs/ blankets ,any thickness, including cover fillets.Complete all as specified and as directed. |
| 13 | Dismantling of AC sheet corrugated / Semi corrugated sheets in wall cladding or in roof covering.Complete all as specified and as directed. |
| 14 | S&F 500 Ltrs capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position.Complete all as specified and as directed. |
| 15 | S & F in repairs 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.complete as specified and directed |
| 16 | M&L for R C C1:1.5:3(20mm gradded agg) as in roof slab supported on wall, beam , landing ,deck slab etc.Complete all as specified and as directed. |
| 17 | M&L for RCC (1:2:4) type BI as in precast slab set in CM (1:4).Complete all as specified and as directed. |
| 18 | Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping).Complete all as specified and as directed. |
| 19 | S&F 10mm dia and over TMT bars as in reinforcement,cut to length bent to shape etc as required incl binding with MS wire annealed not less than 0.90m dia.Complete all as specified and as directed. |
| 20 | S&F in repairs 20 mm Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed.Complete all as specified and as directed. |
| 21 | S&F 15mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors.Complete all as specified and as directed. |
| 22 | S&F 20mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors.Complete all as specified and as directed. |
| 23 | S & F Pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed.Complete all as specified and as directed. |
| 24 | S & F Pressed steel frames of size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed.Complete all as specified and as directed. |
| 25 | M/L PCC 1:3:6 type C1 20mm grade aggregate as in padding, hold fasts/filling of chowkhats or similar work as directed. |
| 26 | S & F 30mm thick flush shutter , solid core construction ,with block board core and plywood face panel ,commercial type on both side.Complete all as specified and as directed. |
| 27 | S/F 30mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauge etc.Divided into squares with plain chamfered or rounded, rebated sash bars, sizes of the members of the shutters as specified in SSR Part I, section 8, clause 8.23(a).Complete all as specified and as directed. |
| 28 | S & F Factory made solid panel pvc door shutter with chowkhats 30mmthick (style) consisting of frame made out of M.S.tubes for top & bottom rails.M.S.frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S.frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & drawing.Complete all as specified and as directed. |
| 29 | S & F PVC doorframe of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening as per specification & drawing.Complete all as specified and as directed. |
| 30 | M&L 10mm thick rendering in cm (1:6) on other than fair faces of brick work finished even & smooth without using extra cement.Complete all as specified and as directed. |
| 31 | M&L 15mm thick rendering in cm (1:4) on fair faces of brick work with using WPC @ 3% finished even & fair.Complete all as specified and as directed. |
| 32 | M&L 5mm thick rendering in cm (1:3) on ceiling finished even of smooth without using extra concrete.Complete all as specified and as directed. |
| 33 | M&Lapplying two coats of distemper by smart painting method over a coat of 3mm thick alayer of wall care puttyon walls.Complete all as specified and as directed. |
| 34 | M&L two coats of oil bound distemper by smart painting method over a coat of 3mm thick layer of wall care putty including preparation of old surfaces by complete removal of existing treatment.Complete all as specified and as directed. |
| 35 | M&L three coats of white wash to internal wall including preparation of new surfaces.Complete all as specified and as directed. |
| 36 | M&L three coats of white washing to ceiling including preparation of new surfaces.Complete all as specified and as directed. |
| 37 | All as per item No 36above but one coat of white wash over old decorativeplastered surface. |
| 38 | M & L for two coats of exterior emulsion antifungus paint by smart painting method over a coat of primer over a coat of 3 mm thick wall care putty to wall including complete including preparation of surface as specified and directed |
| 39 | M & L for two coats of exterior emulsion antifungus paint by smart painting method over a coat of primer over a coat of 3mm thick wall care putty to wall including complete including preparation after complete removal of existing treatment as specified and directed |
| 40 | Supply only integral water proofing compound.Complete all as specified and as directed. |
| 41 | M&L 25 mm thick P.C.C (1:2:4) type B-1 using 20mm graded stone aggregate as in floor finished rough.Complete all as specified and as directed. |
| 42 | M & L Screed Bed or Bedding Layer 15mm thick in Cement Mortar 1:6 for laying Floor Finishes/Tiles, complete all as specified and as directed |
| 43 | M & L for Rendering or Backing Layer 10mm thick in Cement Mortar 1:4 on Walls, etc. for fixing Tiles as Skirtings, Dados,risers etc, complete all as specified and directed. |
| 44 | M & L for machine cut kota stone on flooring/ staircase 20-25 mm thick over cement screed bed laid and jointed with grey cement slurry mixed and with pigment to match the shade of slab including rubbing/grinding and polishing.Complete all as specified and as directed. |
| 45 | All as item No 44 above but on vertical surface such as skirting, risers etc |
| 46 | S&Fnon skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile 600mmx600 mm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match.Complete all as specified and as directed. |
| 47 | S&F non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile 600mmx600 mm, in vertical surface etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match.Complete all as specified and as directed. |
| 48 | S&Fnon skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile 300mmx300 mm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match.Complete all as specified and as directed. |
| 49 | S&F forcolour Glazed ceramic tiles (250x350)/(450x350) of 7 to 8mm thick, in dado/skirtingset and jointed in neat cement slurry and pointed in white or coloured cement to match.Complete all as specified and as directed. |
| 50 | M & L for BlackMarble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed |
| 51 | All as item per Item No 50 above but on vertical wall |
| 52 | S&F Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fitted with tinned tacles or galvanised wire staplescomplete all as specified and as directed. |
| 53 | S&F in repairs Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fitted with tinned tacles or galvanised wire staplescomplete all as specified and as directed. |
| 54 | S&F steel window without glazing bars but with FI/Z section for fixing of gauze and steel handle, peg stay complete all as specified and directed by Engineer-in-Charge |
| 55 | S/F steel window side hung shutters including boxtype hinges with steel handle and steel pegs stay complete with glazing bars complete all as specified and directed |
| 56 | Materials and Labour for mid steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 57 | Hacking Out Old Broken Glass (any thickness, size, quality or description) from Wooden Frames, Glazed with Putty or fixed with Beads, complete all as specified and as directed. |
| 58 | S&F 3mm thick ordinary quality sheet glass in squares n.exc 0.5 sqm in each pane glazing with oil putty.Complete all as specified and as directed. |
| 59 | S&F 100mm size extruded aluminum alloy handles, fabricated type, anodized.Complete all as specified and as directed. |
| 60 | S&F 150mm long aluminium handle, cast type, anodised.Complete all as specified and as directed. |
| 61 | S&F 100mm long aluminum anodized barred tower bolts of extruded section.Complete all as specified and as directed. |
| 62 | S&F 100mm size MS butt hinges, medium weight, cold rolled.Complete all as specified and as directed. |
| 63 | S&F 200 mm aluminium anodisedbarrel tower bolt, of extruded sectionand fixed in position.Complete all as specified and as directed. |
| 64 | S&F 250mm long M.S sliding door bolt, bolt type stove enameled black with bright bolt not less than 12mm dia and including a minimum of six bolts and nuts four on bolt plate & two on staple plate.Complete all as specified and as directed. |
| 65 | S&F 125 mm Butt hinges medium weight cold rolled mild steel and fixed.Complete all as specified and as directed. |
| 66 | S & F Floor door stopper 14cm long of aluminium alloy bodyand tongue, anodised,with hard drawn steel spring,fixed in repairs in floor.Complete all as specified and as directed. |
| 67 | S&F in repair anodised aluminium snap grid frame work for false ceiling all as specified including asbestoscement plain building boards , fixedto timber frame work with screws all as specified and directed. |
| 68 | S & F in repair 300mm, ordinary rat tail rod pattern door springs including roller and roller plate.Complete all as specified and as directed. |
| 69 | M&L for two coats of synthetic enamelled paint over coat of pink primer on wooden surfaces oves 10cm width or girth including preparation of new surface.Complete all as specified and as directed. |
| 70 | M&L 75mm thick P.C.C 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection/sub base/path etc complete all as specified and directed. |
| 71 | M&L Forming Constrution (Dummy) joints 30 mm deep x 10 mm wide, filled with sealing compound grade A.Complete all as specified and as directed. |
| 72 | M &L PCC (1:3:6) type C-2 as in drain/surface channel and similar work .Complete all as specified and as directed. |
| 73 | M&L Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete with fair finished with using extra cement.Complete all as specified and as directed. |
| 74 | S & F in repairs curtain rails, Harrison rails, mild steel,chromium plated with fixing brackets, stops, rollers, clampsetc.Complete all as specified and as directed. |
| 75 | Demolition & bracking up 75/100mm bore AC/CI/PVC pipe set in cement mortor.Complete all as specified and as directed. |
| 76 | S&F 110mm bore P.V.C (S.W.R) pipe, single socketed in any length with rubber ring joints fixed to walls.Complete all as specified and as directed. |
| 77 | S&F 110mm bore P.V.C (S.W.R) bend.Complete all as specified and as directed. |
| 78 | S&F 110mm bore P.V.C (S.W.R)T junction equal or unequal.Complete all as specified and as directed. |
| 79 | S&F 110mm bore P.V.C vent cowl.Complete all as specified and as directed. |
| 80 | S&F 110mm bore PVC (SWR) branch piece, single `Y’ equal or un equal.Complete all as specified and as directed. |
| 81 | S&F 75 mm bore P.V.C (S.W.R) pipe, single socketed in any length with rubber ring joints fixed to walls.Complete all as specified and as directed. |
| 82 | S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including lime concrete bedding 1:2.Complete all as specified and as directed. |
| 83 | M & L for mass concrete filling using PCC ( 1:5:10) type E2 in sunken floor using WPC @ 3% of cement used(Note: WPC Shall be paid separately).Complete all as specified and as directed. |
| 84 | S&F in repairs 10 lits capacity PVC low level flushing cistern including pull chain & flush pipe, connection pipe etc complete all as specified & directed. |
| 85 | High density polyethylene pipes(HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.Complete all as specified and as directed. |
| 86 | S & F steel ventilators with top hung shutter including hinges, steel peg stay complete including taking down of existing one.Complete all as specified and as directed. |
| 87 | S & F 3mm thick figured glass n exc 0.5 sqm in each pane glazing with oil putty.Complete all as specified and as directed. |
| 88 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass, screws and cup washers complete all as specified and directed\" |
| 89 | S & F in repairs 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed |
| 90 | S & F in repairsBrass chromium plated bottle traps of bore 40 mm for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed.Complete all as specified and as directed. |
| 91 | S&F in repair GI pipe Medium grade tubing short length of 40 mm dia as in spout pipe .Complete all as specified and as directed. |
| 92 | S & F in repairs connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed |
| 93 | S&F in repairs 15mm bore fancy type chromium plated bib taps with crutch or butterfly handle screwed down for iron pipes.Complete all as specified and as directed. |
| 94 | S&F in repairs 15 mm bore stop valve fancy type chromium plated with long shank and cup (concealed type) alloy, screwed down, high pressure, with crutel or butterfly handle, screwed both ends for iron pipe or for unions.Complete all as specified and as directed. |
| 95 | M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends and edges oflandings, steps, cills, sunshades, shelves and lintels etc; and cutting chases for concealed water tubing and making good, cutting not exceeding 10 cm girth.Complete all as specified and as directed. |
| 96 | S & F in repair 15mm AngleStop valves cast copper alloy,fancy typewithchromium platedfor iron pipe or for unions and fixed.Complete all as specified and as directed. |
| 97 | S&F in repairs 15mm bore 125mm size type brass chromium plated shower rose, complete all as specified. |
| 98 | S & F in repairs Soap dish of size 160x 160x90mm, any type, fixed to plugs with chromium plated brass screws.Complete all as specified and as directed. |
| 99 | S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm.Complete all as specified and as directed. |
| 100 | S & F in repairs vitreous china wash hand basin glat back of size 550 x 400 mm including brackets CP waste coupling 32 mm and PVC waste pipe and 15mm PVC connection.Complete all as specified and as directed. |
| 101 | M & L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified as specified and directed |
| 102 | M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/eaves board, fixed with selftapping screws as specified and directed |
| 103 | M & L for average 40 mm thick cement concrete 1:2:4 type B-1 using 20 mm graded aggregate with integral wpc complies with in sunken floor and bathroom area(Make Dr fixit, pedilite, fosroc or equivalent)( Note: WPC shall be paid seprately) |
| 104 | S & F APP base polymeric membrane minimum weighing 3kg/sqm and 3mm thick reinforced with polyester non-wove fabric (wt not less than 150gms/sqm) laid on bitumen 85/25 grade primer surface by forced application complete all as specified. |
| 105 | M & L 20mm thich cement plaster in CM 1:4 mixed with water proofing compound @ 3% and applying water proofing treatment on sunken portion with acrylic based polymer modifed cementitious composit compound as specified and approved & cement slurry two layers, 1st layer @ 0.488 Kg/ Sqm mixed with composit compound @ 0.253 Kg/Sqm, & the second layer slurry @0.242 Kg/Sqm mixed 0.126 Kg of compound complete with min 4 hours allowed to air cure between these layers and applying 200 µ polyflim with adhesive.Complete all as specified and as directed. |
| 106 | S & F in repairs Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms).Complete all as specified and as directed. |
| 107 | S & F in repairs Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms).Complete all as specified and as directed. |
| 108 | S&F in repairs pillar tapsfency type with capstan heads, chromium plated, srewed down high pressure, with or without lettered `Hot\"or `Cold\" with long srewed shanks and fly-nuts, screwed for iron pipe and fixed in 15 mm bore.Complete all as specified and as directed. |
| 109 | Demolition of brick work built in cement mortar including all quions, arches pillars etc. all as specified and directed. |
| 110 | M & L Brick work built in CM 1:4 with sub class \"B\"old sizebricks straight or curved on plan exceeding 6 m mean radius.Complete all as specified and as directed. |
| 111 | M&L brick work using sub class ‘B’ bricks (old size) straight or curved on plan to any radius in half brick work built in CM 1:4 complete all as specified. |
| 112 | Demolition and breaking up drain pipes 100 mm dia unserviceable salt glazed stone ware drain pipes set in cement mortarall as specified and directed. |
| 113 | M & L Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate concrete in bed to drain pipe including packing under and haunching against the sides pipes 150 mm internal dia after theyare laid joined and tested.Complete all as specified and as directed. |
| 114 | M & L salt glazed stone ware drain pipes grade A 100mm dia laid in trenches and jointed as specified. |
| 115 | S&F laminated PVC kitchen cabinets of depth 300mm with decorative finish on one face and other face white,made out of 18mm thick outer box and 18mm thick shelves of density not less than 550 kg/cum and shutters complete including knobs, hinges. Fixed to walls with steel screw and PVC sleeves by drilling holes.(Note : Only front face is to be measured).Complete all as specified and as directed. |
| 116 | S&F laminated PVC kitchen cabinets of depth 610mm with decorative finish on one face and other face white,made out of 18mm thick outer box and 18mm thick shelves of density not less than 500 kg/cum and shutters complete including knobs, hinges. Fixed to walls with steel screw and PVC sleeves by drilling holes.(Note : Only front face is to be measured).Complete all as specified and as directed. |
| 117 | M&L 15mm thick plastering in cement mortar 1 :3with integral water proofing compound @ 3% by wt of cement finished even & smooth over RCC roof/slab/Chajja/Sun shade etcwith out using extra cement. (water proofing compound measured & paid separately) in single storie , double storie bldg including necessary scaffolding etc including taking down existing plaster.Complete all as specified and as directed. |
| 118 | M&L for takingdownof existingRoof treatmentfrom roof andfence and coveringsurfaceof oldconcreteroof by picking , sweepingclena and washing down withwater removedust,etcand applyingroof treatementwith the followingspecifications: (a) Rendering15mm th in cm (1:4)fixed with water proofingcompoundas per manufacturers instructionon cleanedconcrete surfaces of roof and finishing thesurfaces fair and even includingcuring theplaster surfaces for 7 daysby pondingwater over the roof (levelingcoure) (b)Applying evenly one coat ofcold bituminousprimerconformingto IS- 3384-1088@ 0.30 litreper sqmon th cleaned plastered surfaces(c)Applyinglayer of APP basedpolymericmembrane3mm th (minimum)weighing3.50 kg per sqm (reinforced withpolysternon woven fabric weighing not less than 160 gmsper sqm by torch application . The overlap shall not less than100mmonn the reversedirectionand 75mmlongitudinal directionand sealingoverlaps. (e)Applyingevenlyone coat ofaluminiumpaintof 0.10 ltr sqm over APP based polymeric membrane. |
| 119 | S & F of Fe-410 Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Complete all as specified and as directed. |
| 120 | M&L for preparation oldpaintedof Woodensurfaces over 10 cm width or girthand applyingone coat ofsynthetic enamel paint complete all as specified and as directed |
| 121 | M&L for preparation oldpaintedsurfacesof steeland ironsurfaces over 10 cm width or girthand applyingone coat ofsynthetic enamel paint complete all as specified and as directed |
| 122 | M&L for preparation new surfacesof steeland ironsurfaces over 10 cm width or girthand applyingtwo coat ofsynthetic enamel paint over a coat of red oxide primer complete all as specified and as directed |
| 123 | Supply and fix Plate rack made out of Stainless steel sheet 0.5 thick overall size 700(H)x800(W)x250(D) including brackets or fitted with existing shelves in repair complete all as specified and directed |
| 124 | S&F in repair wall mixer , 3 in -1 system with provision for over head shower, chromium plated, fancy type, 15 mm bore complete all as specified and directed |
| 125 | M & L for 75mm thickPlainCement concrete 1:3:6 type C 2 using 40mm gradded agg as inbedding of foothpath.Complete all as specified and as directed. |
| 126 | M&L for sand cushioning with clean dry sand for sub base or inprotection of under ground cable complete all as specified and as directed. |
| 127 | S & F Machine pressed precast concrete interlocking paver block gloosy fineshed laid over sand cushioning layer of 80mm thick of any shape and design complete all as specified and directed. size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade.NOTE - ( Sand cushioning layer will be measured and paid seperately ) |
| 128 | Removing of vegitation including roots from wall and roof of bldg,mouth of rain/waste water pipe,height upto 12 m including necessary scaffolding works, cutting of wall/roof etc to remove complete root of vegetations and applying blue vitriol at the root of vegetation and making good the damaged portion with CM 1:4 etc complete all as specified and directed by Engr-in-Charge. |
| 129 | Removing of vegitation including roots from wall and roof of bldg,mouth of rain/waste water pipe,height upto 12 m including necessary scaffolding works, cutting of wall/roof etc to remove complete root of vegetations and applying blue vitriol at the root of vegetation and making good the damaged portion with CM 1:4 etc complete all as specified and directed by Engr-in-Charge. |
| 130 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc.complete all as specified and directed. |
| 131 | M & L for point wiring forone light/fan point/call bell controlled by one, one way switch. with 1.5 Sq mm (nominal area) PVC insulated and unsheathed single core FRLS copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC concealed conduit and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and unsheathed single core FRLS cable 1100 votls grade with stranded copper conductor and connected to common earth dolly, with and including modular metal flush box & cover plate of suitable size complete for housing the modular switches, socket outlets, fan regulators etc. Note:- (i) Rate deemed to be inclusive of cutting chases and making good disturbed surface).(ii) Modular metal flush box & cover plate will be measured and paid under Relevant item. |
| 132 | All as per Item No 131above but one socket outlet 5 pin 6 amps on independent board. |
| 133 | All as per Item No 131above but one 5 amps socket outlet on same board with other switch. |
| 134 | M & L for point wiring with 2.5 Sq mm (nominal area) PVC insulated and unsheathed single core FRLS copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC concealed conduit and conduit accessories alongwith continuous earth wire 2.5 Sq mm PVC insulated and unsheathed single core FRLS cable 1100 votls grade with stranded copper conductor and connected to common earth dolly, with and includingmodular metal flush box & cover plate of suitable size complete for housing the modular socket outlets 6 in 15/16 Amp on independent board. Note:- (i) Rate deemed to be inclusive of cutting chases and making good disturbed surface).(ii) Modular metal flush box & cover plate will be measured and paid under Relevant item. |
| 135 | Supply and fix Modular switch one way 10 Amp. |
| 136 | Supply and fix modular socket outlet 2 in 1, 3/5 pin 10 A. |
| 137 | Supply and fix Modular switch one way 20 Amp. |
| 138 | Supply and fix modular socket outlet 2 in 1,3 pin20 Amps |
| 139 | Supply and fix modular type electronic fan regulator. |
| 140 | Supply and fix modular bell push 10 Amp. |
| 141 | Supply and fix Ding Dong bell, AC, 230 volts, single pole. |
| 142 | Material and labour for ceiling rose polycarbonate isolated body 3 ways terminals. |
| 143 | Supply and fix lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings. |
| 144 | Supply and fixing modular white cover plate with frame 1 modules complete all as specified and as directed. Make: Havells/Anchor or equivalent make as approved by GE. |
| 145 | Supply and fixing modular white cover plate with frame 2 modules complete all as specified and as directed. |
| 146 | Supply and fixing modular white cover plate with frame 3 modules complete all as specified and as directed. |
| 147 | Supply and fixing modular white cover plate with frame 4 modules complete all as specified and as directed. |
| 148 | Supply and fixing modular white cover plate with frame 8 modules complete all as specified and as directed. |
| 149 | Supply and fixing modular white cover plate with frame 12 modules complete all as specified and as directed. |
| 150 | Supply and fixing modular metal flush box 1 modules complete all as specified and as directed. |
| 151 | Supply and fixing modular metal flush box 2 modules complete all as specified and as directed. |
| 152 | Supply and fixing modular metal flush box 3 modules complete all as specified and as directed. |
| 153 | Supply and fixing modular metal flush box 4 modules complete all as specified and as directed. |
| 154 | Supply and fixing modular metal flush box 8 modules complete all as specified and as directed. |
| 155 | Supply and fixing modular metal flush box 12 modules complete all as specified and as directed. |
| 156 | Supply and fixing LED fitting 20 watts high efficiency enviormental friendly long lifemounting on PVC round/square PVC block and making all connection using three core PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed.Make :- Havells cat No. LHEXACP7INIW20 or equivalent in Bajaj/Surya/Phillips/CG |
| 157 | Supply and fixing LED fitting 10 wattshigh efficiency enviormental friendly long lifemounting on PVC round/square PVC block and making all connection using three core PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed. Make :- Havells, Model No. LHEBTP7INIW009 or equivalent in Bajaj/Surya/Phillips/CG |
| 158 | Supply and fix energy saving and environment friendly long life LED street light made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection 35 W complete with clamp bolts all as specified and as directed. Make: Havells Cat No: ENDURAPEARLSL35WLED757SASYTOPC or equivalent in Bajaj/Philips/Surya. |
| 159 | Supply & fix LED bulb 10 watt complete all as specified and as directed. Make Havells model No.B-22 or equivalent in Surya/Bajaj |
| 160 | Supply and fixing decorative wall light made up of high grade engineering plastic material suitable for LED 20W complete as per manufacturer\"s instructions.Make Havells Model No. LHFHCHE1TL1W020 or equivalent in Bajaj/Surya/Phillips/CG |
| 161 | S&F in replacement of decorative Trim Clipon LED Panel light not less than 12 Watt, 6500 K unique slimmest recess com surface panel, soul made up of high grade unbreakable polycorbonate material all as specified and directed. Make Havells Model No. LHEAABP7IL1W012 or equivalent in Surya/Bajaj/ |
| 162 | Materialand labour for sub main wiring complete with two runs of 6 sqmm single core FRLS grade PVC insulated unsheathed cable 1100 volt grade multistranded copper conductor drawn in and including PVC concealed conduit of suitable size and accessories surface on wall, roofs etc with one run of PVC insulated copper conductor 6.0 sqmmsingle core as earth continuity conductor connected with earth dolly and mains all as specified. (Note;- (i) 3 runs of 6 sqmm multistranded copper cable and 1 run of non metalic PVC conduit shall be measured as single run. (ii) Cost of cutting chases shall deemed to be included in unit rate.) |
| 163 | Supply and fixing 6-32 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB SPN) of single pole and neutral and current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed. |
| 164 | Supply and fixing 6-32 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB SP) of single poles and current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed. |
| 165 | Supply, Installation, testing & Commissioningofheater water storage type electric geyser (vertical cylindrical type) 25 Litre capacity with BEE 5 star rating(minimum) and metallic body ,porcelain enamel glass lined inner tank including fixing arrangement with providing including suitable capacityflexible cable 3 core with 3-pin plug of 16A capacity maximum 2metre length, PVC Connection pipe of suitable length for Hot and Cold Water, fixing on Walls with and including all necessary fitting material i.e. Mild Steel Bolts (Bolts to be grouted), Nuts, Washers, etc complete all as specified and as directed. Make : Usha Model No. Misty or equivalent of Bajaj /Havells / Crompton |
| 166 | Supply and fix Exhaustfan 300 mm(min) sweep MS CRCA bodyand metal blades with double ball bearing metal protective bird guard , AC single phase, including electrical connection with twisted three core PVC insulated flexible cord of size 0.75 Sqmm copper conductor from celing rose complete all as specified and as directed.Make: Model-Aeroclean plus DBB GBD of Usha or equivalent make of Havells/Crampton |
| 167 | Supply and fix sheet metal enclosures SPN DB\"s 8 way when MCBs to be used 240 Volts, double door all as specified and directed. Make :- HPL, Model No. MDBDD08 or equiavlent make in L&T /Havells. |
| 168 | Excavation in trenches not exc 1.5 m in depth and not exc 1.5 m wide for taking out/laying XLPE cable/CI/GI pipes and getting out in soft/loose soil complete all specified/directed |
| 169 | Removing excavation soil at a distance not exc 50 m and deposited where directed complete all as directed. |
| 170 | Returning,filling in including spreading, leveling, watering and well rumming in layers not exc 25 cm complete all as directed. |
| 171 | M&L for Brick Sub Class \"B\" locally available best quality laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection completeall as specified and as directed. |
| 172 | Supply,laying in repair in trenches of XLPE UG cable insulatedaluminium stranded conductor served with an inner sheathing or PVC tape heavy duty armoured upto 1100volts (earthed) GI steeel strip and overall PVC sheathed nominal cross sectional area 16 sqmm 4 core testing complete all as specified and directed. |
| 173 | Supply and fix sheet metal enclosures TPN DB\"s 4 way when MCBs to be used 415 Volts, double door all as specified and directed. Make :- HPL, Model No. MDBTDD04/L&T/Havells |
| 174 | S & F MCB TPN 415 Volts, 63 Amps, 50 Hz, breaking capacity 10KA, C series all as specified and directed. Make- HPL Model No. NTTPNC63 /L&T/Havells |
| 175 | S&F in replacementsteel water tubing 50 mm dia of bore light grade galvanised with all fittings laid in trenches / fixing with surface of wall after drawn through electric cable by means of nuts bolt and washers all as directed . |
| 176 | M & L for earthing complete with GI earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level ) with top edge of the plate not less than 1.5 m below normal ground level , connected to galvanised earth lead iron wire 4mm dia by means of GI bolts nuts and washers of galvanised iron or steel etc all as shown in electrical plate No.3 including earth work PCC pit and RCC pit cover, funnel with watering pipe ,wire mesh ,alternate layer of salt and charcoal, GI protection pipe light grade and testing on completion all as specified and directed by Engr-in-charge. Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount.Note 2-Contractor\"s supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor\"s firm name while carriying out any activities in defence area for better check of security purpose.Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs) |
