|
| 1 | SUPPLY OF ALUMINIUM INTERNAL FLOATING ROOF (IFR):Design, Procurement, Packing, Transportation and Supply of Pontoon type Aluminium Internal Floating Roof designed as per API 650, Appendix H & as per tender specifications including shoe seals - primary mechanical and secondary viper seals.Note:1) Deck sheeting with minimum 0.60 mm thick Aluminium and design point load of 750 psf.2) MOC shall be Full Aluminium as per specifications for MS Tanks.3) MOC of Wetted parts alone shall be with SS 304 L grade for Ethanol Storage Tanks.4) The job includes supply of all the required accessories like earthing antistatic device, anti rotation device, PVRV and cum Manway on deck (breather valve), Legs, SS Shoes for Legs, Deck Drain System Device with Connections etc. complete in all respect.5) Minimum 10 years Anti sinking warranty from OEM will be required.The design& QAP for this item shall have to be vetted through any one among the list of TPI enclosed with the Tender and shall be approved by IOCL /Consultant. Additionally, the materials required for this item shall also require Third party inspection / clearance from any agency from the \"list attached. The item shall be quoted for considering total responsibility towards design, supply, testing, erection and commissioing of the Aluminium IFR (Erection & commissioning shall be paid separately). |
| 2 | HSD storage Tanks( T-22),IFRVT, 22M Dia x 15m Ht |
| 3 | HSD storage tanks (T-25,26),IFRVT,30M Dia x 15m Ht |
| 4 | ETHANOL storage tanks(T-27),IFRVT, 16M Dia x 12m Ht [MOC of all wetted parts to be in SS 304 L] |
| 5 | INSTALLATION |
| 6 | ALUMINIUM INTERNAL FLOATING ROOF: Fabrication, Erection, Testing and Commissioning of supplied Pontoon type Aluminium Internal Floating Roof as per specification designed as per API 650, Appendix H.Note:a. The erection of all gadgets, fixing of the rim seals shall be in the scope of above item.b. The rate also includes precommissioning visit to site by the OEM of IFR inlcuding providing clearance for commissioning. Assembly and erection of aluminium floating roof with all associated accessories and rim seals shall be done by OEM or their authorized agency and necessary test certificates shall be provided by OEM or their authorized agencyc. Providing Cathodic protection during Flotation test is also included in the scope.d. The rate of item includes supplying andinstallation of MS contour plates(as per drawing) for position of various pipe sizes for holding them in plumb inside Man-hole |
| 7 | HSD storage Tanks( T-22),IFRVT, 22M Dia x 15m Ht |
| 8 | HSD storage tanks (T-25,26),IFRVT,30M Dia x 15m Ht |
| 9 | ETHANOL storage tanks(T-27),IFRVT, 16M Dia x 12m Ht |
| 10 | \"NOTE:-THE ABOVE RATE SHALL BE INCLUSIVE OF ALL TAXES & DUTIES, ROYALTIES, CESS, ENVIORMENTAL & POLLUTION, FITNESS & SAFETY CLEARANCE CHARGES (IF ANY), OR ANY OTHER INCIDENTAL CHARGES ETC BUT EXCLUDING GST.\" |
