|
| 1 | Labour for dismantling G.I. pipe with fittings.(i) 15 mm |
| 2 | (ii) 25 mm |
| 3 | (iii) 40 mm |
| 4 | (iv) 50 mm |
| 5 | Refixing G.I. pipe with fittings after cleaning where necessary.(i) 15 mm |
| 6 | (ii) 25 mm |
| 7 | (iii) 40 mm |
| 8 | (iv) 50 mm |
| 9 | Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(A) For Exposed Work15 mm dia. medium quality |
| 10 | 25 mm dia. medium quality |
| 11 | 40 mm dia. medium quality |
| 12 | 50 mm dia. medium quality |
| 13 | Supplying, fitting and fixing Peet\"s valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).15 mm dia |
| 14 | 25 mm dia |
| 15 | 40 mm dia |
| 16 | 50 mm dia |
| 17 | Supplying, fitting and fixing bib cock or stop cock.(a) Chromium plated Bib Cock short body (Equivalent to Code No. 511& Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 18 | Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B)& Model-Tropical/SumthingSpecialofESSCOorsimilar |
| 19 | Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). |
| 20 | (e) PTMT (Polytetra Bib Cock / Stop Cock( Prayag or equivalent) 15 mm |
| 21 | Supplying, fitting and fixing alloy iron with brass spindle bib cock/ stop cock of approved brand and make, spray painted and tested to 21 kg per sq. cm.(i) 15 mm |
| 22 | Wash basin vitreous china of approved make (without fittings)supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm woodblocks and C.I. brackets including two coats of painting of C.I. brackets.550 mm X 400 mm size |
| 23 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.450 mm long |
| 24 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.900 mm long |
| 25 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware ofapproved make complete in position with necessary bolts, nuts etc.With \"P\" trap |
| 26 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.470 mm X 280 mm X 340 mm |
| 27 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P.hinges, rubber buffer and brass screws complete.(a) E.W.C.Plastic (hallow type) white |
| 28 | Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make withnecessary fixing materials and clamps complete.i) Polythene Flush Pipe |
| 29 | Removing chokage of H.C.I. or S.W. pipe with split bamboo.(a) Underground |
| 30 | Dismantling H.C.I. pipe with fittings including melting lead caulked joints.100 mm |
| 31 | Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S. 3989/ 2009 and I.S. 1729/2002 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary, and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approvedpaint complete. (Measurement will be made along the center line ofthe total pipe line in fitted condition including specials,payment for specials & Painting will however be paid seperately).(a) With valamoid joints including sealing with sand cement morter (4:1)upto quarter depth.100 mm dia. (internal) |
| 32 | Supplying,fitting&fixingH.C.I.bendwithdoorconformingtoI.S.S.including jointing complete andpainting two coats to the exposed surfacewith approved paint complete. (Payment of Painting will however bepaidseperately).(a) With valamoid joints including sealing the top with cement mortar (4:1)100 mm dia. |
| 33 | Supplying,fitting and fixing cast iron \"P\" or \"S\" trap conformimg to I.S.3989/ 2009 and 1729/ 2002 including lead caulked joints and painting twocoats to the exposed surface. (Painting to be paid seperately).\"P\" Trap100 mm |
| 34 | Supplying,fittingandfixinginpositionR.C.C.Manhole/pitcoverofapproved make with rim of approved make (Heavy type)(i) 450 mm dia. |
| 35 | (ii) 560 mm dia. |
| 36 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992Single Socketed 3 Meter Length(a) 110 mm |
| 37 | (ii) Single Socketed 1.8 Meter Length(a) 110 mm |
| 38 | Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer- in-charge. (Payment will be made on centre line measurement of the total pipeline including specials.(A) Above ground(i) 110 mm dia. |
| 39 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming toI.S. specification with P.V.C. fittings complete,C.I. brackets including twocoats of painting to bracket etc. |
| 40 | Supplying, fitting and fixing low-down cistern parts.(i) Internal fittings for cistern complete of approved make. |
| 41 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixingetc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(a) For Exposed Work PVC Pipes(Dia)15 mm |
| 42 | 25 mm |
| 43 | 40 mm |
| 44 | Supplying, fitting and fixing pillar cock of approved make.a) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model -Tropical / Sumthing Special of ESSCO or similar brand). |
| 45 | d) Polythene Piller Cock (EMCO / ATLAS or equivalent)(i) 15 mm |
| 46 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thickwith silvering as per I.S.I. specifications supported on fibre glass frame ofany colour, frame size 550 mm X 400 mm |
| 47 | Supplying, fitting and fixing towel rail with two brackets.C.P. over brass25 mm dia. and 450 mm long |
| 48 | Supplying, fitting and fixing in position reinforced cement polymer concretemanhole /gully pit cover with matching frame.As per I.S-12592(M.D)(ii) 25 MT load bearing capacity round manhole cover provided with twolifter hooks fitted with matching frame of sizeCover: 680 mm X 90 mmFrame: 800 mm X 165 mmopening:500mmWeight: 196 kg (approx) |
| 49 | (iv) 15 MT load bearing capacity round manhole cover provided with twolifter hooks fitted with matching frame of sizeCover: 460 mm X 75 mmFrame: 620 mm X 150 mmopening:360mmWeight: 100 kg (approx) |
| 50 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.A) UPVC Pipes:110 mm. Dia. |
| 51 | B) UPVC Fittings:Bend 87.5 degree 110 mm. Dia. |
| 52 | d) Shoe110 mm. Dia. |
