Tender For Procurement Of Open Air Auditorium , Main Item - Open Air Auditorium (As Per The Detailed Specification Mentioned At Point 4 And Warranty Mentioned In The Schedule Of The Tender Document) , Sitc Of Weatherized Digitally Steerable Powered Column Array Loudspeaker With 32 Independently Controlled Drivers. It Should Have Integrated Dsp And Beamengine Gui Control For Installation Applications. The Speaker Should Have 16 X 3” Lf & 16 X 1” Hf Driver. The Speaker Should Have 32 Channels Of 100 W (Rms) @ 4 Ohms. The Speaker Should Have Lf Beam Control Limit Of 400 Hz. It Should Have Maximum Spl @ 100 Ft Of 100 Db. The Speaker Should Have Dispersion Of 120 Degree Horizontal & Variable Between 10 - 100 Degrees Vertical. The Speaker Should Have Aiming Angle Limit Of ± 70 Degrees. The Speaker Should Have Frequency Range Of 130 Hz – 20 Khz And Sample Rate : 96 Khz. It Should Be Fully Pa/Va Compliant And Ip54 Certified. It Should Have Analogue & Aes/Ebu Inputs. The Speaker Should Be Made Up Of Aluminium With Corrosion Resistant Aluminium Perforated Grille.The Speaker Should Be Supplied With Custom Brackets Which Allow Quick And Accurate Installation. Approved Makes: Tannoy, Renkus Heinz, Fohn Audio , Sitc Of Passive Single 18 Weatherized Subwoofer. It Should Have Impedance Of 8 Ohms. The Subwoofer Should Have Sensitivity Of 100 Db Or More. It Should Have Minimum Rms Power Of 600 W. The Subwoofer Should Have Maximum Spl Of 134Db Or Better. It Should Have Frequency Response (±3 Db) : 40 Hz - 150 Hz And Frequency Range (-10 Db) : 33 Hz - 150 Hz. The Subwoofer Should Be Made Up Of 18 Mm (¾ ) Birch Plywood And Should Have Powder Coated Perforated Steel Grill. It Should Have Multiple Flying Suspension Point M10 Type. Approved Makes: Tannoy, Renkus Heinz, Fohn Audio , Sitc Of 2-Way Full Range Active Loudspeaker With 1 X 12 Lf Driver, 1 X 1 Hf Driver Or Better. It Should Have Power Rating Of 1000 Watts Peak Or Better. The Speaker Should Have Frequency Response Of 45 Hz- 18 Khz Or Better. It Should Have Dispersion Of 70-90 X 50-60 Or Better. The Speaker Should Have Maximum Peak Spl Of 127 Db Or Better. It Should Have Bass Treble Control, Mic/Line Level Control. It Should Be Made Up Of Injection-Moulded Polypropylene Enclosure With Mutiple Rigging Points Etc All Complete With Mounting Arrangements. Approved Makes: Tannoy, Renkus Heinz, Fohn Audio , Sitc Of 4 Bi-Amped Ultra-Compact Studio Reference Monitor With Tuned Front-Firing Bass Port. It Should Have 1 X 4” Lf & 1 X 3/4” Hf Driver. The Speaker Should Have Power Handling Of Lf- 25 W Rms & Hf- 25 W. The Speaker Should Have Maximum Spl Of 101Db Or More. The Speaker Should Have 90 Degree Conical. It Should Have Frequency Response (±3 Db) Of 56 Hz To 48 Khz And Crossover Frequency Of 2.8 Khz And Distortion:<0.9%. The Speaker Should Have User Controls And Made Up Of Mdf Cabinet With Injection Moulded Front Baffle.Approved Makes: Tannoy, Renkus Heinz, Fohn Audio , Sitc Of 4-Channel 4000Watt Power Amplifier. The Amplifier Should Be Class D Type. It Should Have Thd 20Hz-20Khz At 1 W <0.1% And Signal To Noise Ratio >106 Db. The Amplifier Should Have Channel Separation At 1 Khz >70 Db. The Amplifier Should Have Power Handling Of 4 × 1000 W @ 2 Ohms / 4Ohms / 8 Ohms, 4 × 625 W @ 16 Ohms. It Should Be 70V / 100 V Compatible And Should Have Power Handling Of 4 X 1000W @ 70V. It Should Have Frequency Response Of 2 Hz - 40 Khz And Input Impedance Of 20 Kohm. It Should Have Common Mode Rejection (Cmr) Of 50 Db And Output Impedance 25 Mohm. The Amplifier Should Be Enerygy Star Rated. Approved Makes: Labgruppen, Powersoft, Mc Square. , Sitc Of Wireless Handheld Microphone System, Wireless Microphone System With Mhz Carrier Frequency Band, Up To 16 Pre-Programmed Frequencies Within The Same Frequency Band, Audio Bandwidth 35 - 20,000 Hz, Thd At 1 Khz: <0.3% (Receiver) , Signal-To-Noise: 120 Db(A) ( Receiver), Wideband Fm Modulation, Up To 48 Simultaneous Channels , Upto 14 Hours Operation With One Single Aa Battery Or Better, Pilot Tone, Transmission To Know The Transmitter Battery Status, Receiver Should Have Microphone Level And Line Level Output, Transmitter Should Have Display To Show The Battery And Led To Show The Muted /Unmuted Status, Sensitivity 6.3 Db V / - 100 Dbm, Should Have Microprocessor-Controlled Diversity, T.H.D.: 0.7 % (Transmitter), Infrared Programmable, Rf Output Power: 10 Or 50 Mw Approved Make : Shure / Sennheisser / Beyerdynamics , Sitc Of Wireless Headworn Microphone System, Wireless Microphone System With Mhz Carrier Frequency Band, Up To 16 Pre-Programmed Frequencies Within The Same Frequency Band, Audio Bandwidth 35 - 20,000 Hz, Thd At 1 Khz: <0.3% (Receiver), Signal-To-Noise: 120 Db(A) ( Receiver), Wideband Fm Modulation Up To 48 Simultaneous Channels, Upto 14 Hours Operation With One Single Aa Battery Or Better, Pilot Tone Transmission To Know The Transmitter Battery Status, Receiver Should Have Microphone Level And Line Level Output, Transmitter Should Have Display To Show The Battery And Led To Show The Muted /Unmuted Status, Sensitivity 6.3 Db V / -100 Dbm, Should Have Microprocessor- Controlled Diversity, T.H.D.0.7 % (Transmitter), Infrared Programmable, Rf Output Power: 10 Or 50 Mw. The Mic Should Be Supplied With Lapel Mic Lead For Working With Receiversapproved Makes : Shure / Senheisser / Beyerdynamics , Sitc Of Wired Dynamic Vocal Microphone, Super Cardioid Vocal Microphone, Audio Frequency Bandwidth :50 - 16000 Hz, Sensitivity2.6 Mv/Pa. Approved Make : Shure / Senheisser / Beyerdynamics , Sitc Of Wired Dynamic Instrument Microphone, Cardioid Dynamic Instrument Microphone, Audio Frequency Bandwidth =40 - 16000 Hz, Sensitivity At 1000 Hz 2.5 Mv/Pa (–52 Dbv Re 1 V/Pa), Max. Spl For 1 % Thd = 47 Db Spl Make : Shure / Senheisser / Beyerdynamics , Sitc Of Wired Gooseneck Microphone With Desktop Base Unit And On/Off Switch For Podium, Desktop Gooseneck Mic, Audio Frequency Bandwidth =70 - 16000 Hz, Signal To Noise:64 Db-A, Length =500 Mm, Voltage =9 To 52 V Power Interface, Should Have Detachable Cable Make : Shure / Senheisser / Beyerdynamics , Sitc Of 40 Channel Digital Mixing Console Having Microphone Preamplifier Inputs - 32 Or Better And Mix Buses Of 25 Or Better. It Should Have Aux Inputs/Outputs: 6/6. It Should Have 2 Or More Aes50 Or Equivalent Stage Box Connectivity Ports. It Should Have 2 Monitoring Outputs. It Should Have Input Processing Channels As Follows: 32 Input Channels, 8 Aux Channels, 8 Fx Return Channels. It Should Support 16 Output Processing Channels Along With 16 Aux Buses, 6 Matrices. The Mixer Should Support 8 True Stereo And 16 Mono Internal Effects Engines. It Should Have 40-Bit Floating Point Signal Processing And 192 Khz Adc And Dac Converters For Outstanding Audio Performance. The Mixer Should Support A/D Conversion 24-Bit, 112 Db Dynamic Range & D/A Conversion 24-Bit, 120 Db Dynamic Range. It Should Have 32 Channel Bidirectional Multitarck Recording And Playback On Sd/Sdhc Cards. The Mixer Should Have 1 Midi Inputs / Outputs. It Should Have Display Of 7 Tft Lcd. Approved Makes: Music Tribe, Allen & Heath, Yamaha. , Sitc Of 32 Input, 16 Output Stage Box With 32 Microphone Preamplifiers, Ultranet And Adat Interfaces. It Should Have Input 32 X Xlr , Output 16 X Xlr. It Should Have 2 Aes-3 Ports (Aes/Ebu), For Directly Connecting Pa System Controllers With Digital Inputs. It Should Have Personal Monitoring System Connectivity For In-Ear Applications And Should Have Dual Aes50 Supermac Ports For Cascading Additional Stageboxes. It Should Have Input Impedance Of Xlr 10 K? And Crosstalk Rejection @ 1 Khz, Adjacent Channels 100 Db. It Should Have Mute All Function For Quietly Patching Any Inputs On Stage. It Should Support Remote Operation Via Shielded Cat5e Cable Up To 330 Ft / 100 M Length And Should Have Midi In/Out For Bidirectional Communication Between Console And On-Stage Midi Devices. All The Settings Program Can Be Done From Front Panel Controls Or Console. It Should Have 4-Digit, 7-Segment, Led Display. It Should Have Usb Type B, Rear Panel, For System Updates. It Should Be Rugged 2U Rackmount Chassis For Durability In Portable Applications , Sitc Of Active Stereo Di Box With Extended Dynamic Range And Sum/Split Options, Fully Transformer-Isolated Design Ensures Electrical Separation Between Pa And Stage Equipment, Balanced Line Inputs On Neutrik Combo* Xlr And High Impedance 1/4 Trs Connectors, Rca Phono Inputs For Connection Of Consumer Audio Equipment, Global 20 Db Input. Approved Makes: Yamaha, Music Tribe, Allen & Heath. , Sitc Of3 Analog Inputs And 6 Analog Outputs For Maximum Flexibility, Precise Dynamic Eqs For Level-Dependent Equalization And Extremely Musical Parametric Eqs, Selectable For All Inputs And Outputs, S, Four Different Mono And Stereo Output Operating Modes, Individual Crossover Filter Types With Selectable Roll-Off Characteristics From 6 To 48 Db/Octave, Adjustable Delays For All Inputs And Outputs. Approved Makes: Music Tribe, Yamaha, Dbx. , Sitc Of All-Purpose Mic Stand,Edge-Concentrated, One-Piece Circular Base Ensures Maximum Stability , Wearproof, Three-Piece Clutch Offers Secure, Fast, And Noise-Free Height Adjustment , Sitc Of Fixed Height Desktop Mic Stand 5 Inch Ebony Finish, Versatile Stands Fulfill Functional And Aesthetic Miking Requirements For Microphone Placement , Civil Structure For Subwoofers @ Front, Hanging Arrangement Of Speakers And Subwoofers , Sitc Of Full Hd 1080P, 20X Optical Zoom, 128 Presets, 60 Frames Per Second, Ethernet Out, Hdmi Out, 3G-Sdi Out, Audio In, Rs232/422 Controls, -170° ~ +170° Panning Angle, -30° ~ +90° Tilting Angle , Supports Poe. Approved Makes: Lumens, Sony, Vaddio. , Mounting Stand For Cameras , Sitc Of Joystick For Pan/Tilt/Zoom And Focusing, Rs232c/Rs455 Communication Interfaces, High Brightness Oled Display, Auto Backlit Keys, Should Be Able To Control Minimum 7 Cameras. Approved Makes: Lumens, Sony, Vaddio. , Sitc Of Switcher With 8 Nos Of Video Inputs And 4 Outputs. It Should Have Min. 2 X 3.5Mm Stereo Mini Jack Inputs And 1 X 3.5Mm Stereo Mini Jack Output. The Switcher Should Have 8 X Hdmi Type A, 10-Bit Hd Switchable Inputs And 2 X Hdmi Outputs. It Should Have 1 X Ethernet Port Which Supports 10/100/1000 Baset For Live Streaming, Software Control, Software Updates And Direct Or Network Panel Connection. It Should Have 2 X Usb Type-C 3.1 Gen 1 For External Drive Recording, Webcam Out, Software Control, Software Updates And Panel Connection. The Swithcer Should Support 11 Input X 2 Channel Mixer. The Switcher Should Be Supplied With One Recorder Having 1 X Sdi Video Input And 2Xsdi Video Output. It Should Have 1 Sdi Monitor Output And 1 Hdmi 2.0 Video Input Along With 1 Hdmi 2.0 Video Outputs. It Should Have Built In Speaker With One 2.2 Inch Inbuilt Lcd. It Should Have 1 X Bnc In, 1 X Bnc Out. The Box Should Have 1 X Usb Type-C 3.0 For External Drive Recording, Webcam Out, Software Configuration And Updates.It Should Be Supplied With 2 Sd Cards Of Minimum 512 Gb And 2 Nos Sdi To Hdmi Convertors. Approved Makes: Roland, Bmd, Extron. , Sitc Of 554K Uhd(3840 X 2160) Resolution Android Led Display With Built In 2.4 Ghz Wifi, 1.1 Ghz Built In Quad Core Processor, 2 Gb Ddr3 Ram, 16 Gb Memory, Built In Double Core Mali 600 Mhz Gpu, Withhdr 10, Dolby Audio, Built In Wifi And Cromecast, Built In Web Browser, Hdmi Cec, Hdmi Arc, Built-In Bluetooth Ver.4, 20W Built In Speakers, Hdmi 2.0 X 3, Av X 1, Usb 2.0 X 1, Rj45 X 1, Headphone Out X 1, Spdif Out X 1. , Cables And Connectors
