Road And Building Department-RBD has published Tender For Construction Of Opd/Ipd For Chc At Chhendipada In The District Of Angul For The Year 2022-23 Under Dmf. Submission Date for this Tender is 20-12-2022. Building Work Tenders in angul Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Clearing and grubbingland including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned upto a lead of 1000metres including removal and disposal of top organic soil not exceeding 150mm in thickness as per Clause 201 of MoRT&H Specifications for Road & Bridge works Latest Revision & including cost of all labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. |
| 2 | Earth workexcavation in foundation trenches in hard soil including dressing and leveling the bed up to required depth and depositing the excavated materials at places away from work site within 50mtr initial lead and 1.5mtr initial lifts T&P shoring shuttering dewatering if required etc. complete as per direction of the Engineer-in-charge. |
| 3 | Earth workexcavation trenches in hard soil including dressing and leveling the bed up to required depth and depositing the excavated materials at places away from work site within 50mtr initial lead and 1.5mtr initial lifts T&P shoring shuttering dewatering if required etc. complete as per direction of the Engineer-in-charge. |
| 4 | Providing Pre Anti termite treatement of best quality including basic cost, conveyanceof all materials, cost of all labour, T&P required for the work etc. including labour cesscomplete as per direction of the Engineer-in-charge |
| 5 | Supplying filling in foundation and plinth with sand in layers not exceeding 150mm thick including watering, ramming including cost, conveyance, royalty and taxes of all materials, all labour T&P required for the work etc. complete (measurement will be taken on finished compacted section only). |
| 6 | Filling foundation and plinth with excavated earth ramming etc complete as per approved drawing and technical specifications as per Clause 304 and Section 900 of MORT&H Specifications for Road & Bridge works (Latest Revision)complete in all respect & as per direction of the Engineer-in-Charge. |
| 7 | Cement concrete of propertion (1:3:6) in foundation and floors using 40mm nominal size clean hard black cursher broken granite metal of approved quality from approved quarry including lowering laying concrete in layers not exceeding 15cm thick to the required level ramming watering curing centering & shuttering etc. complete including cost conveyance royalty taxes of all materials and alllabour T&P required for the work etc. complete as per direction of the Engineer-in-charge. |
| 8 | Cement concrete of propertion (1:2:4) in foundation and floors using 12mm nominal size clean hard black cursher broken granite metal of approved quality from approved quarry including lowering laying concrete in layers not exceeding 15cm thick to the required level ramming watering curing centering & shuttering etc. complete including cost conveyance royalty taxes of all materials and alllabour T&P required for the work etc. complete as per direction of the Engineer-in-charge. |
| 9 | RCC work of M-20 in all floors having a minimum compressive strength ( in work test) 200kg/cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 10mm size to 20mm size black hard crusher broken granite stone chips (10mm size 40% & 20mm size 60%) of approved quality & from approved quarry including hoisting lowering laying and compacting concrete with centering & shuttering and finishing the exposed surface smooth providinggrooves or beads where necessary and providing required No. of fan hooks as required including cost, conveyance, royalties and taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect but excluding cost of MS rod / Tor steel and binding wire and labour charges for bending binding and tying the grills.(In all Floors) |
| 10 | A) Column base & footing |
| 11 | B) Plinth beam |
| 12 | C) Column & Roof Beam |
| 13 | i) Ground Floor |
| 14 | ii) 1st Floor |
| 15 | iii) 2nd Floor |
| 16 | D) Lintel Band |
| 17 | i) Ground Floor |
| 18 | ii) 1st Floor |
| 19 | iii) 2nd Floor |
| 20 | E) Chhaja (6.50cm average thick) |
| 21 | i) Ground Floor |
| 22 | ii) 1st Floor |
| 23 | iii) 2nd Floor |
| 24 | F) Roof slab |
| 25 | i) Ground Floor |
| 26 | ii) 1st Floor |
| 27 | G) Stair Case |
| 28 | i) Ground Floor |
| 29 | ii) 1st Floor |
| 30 | H) Ramps |
| 31 | i) Ground Floor |
| 32 | ii) 1st Floor |
| 33 | Labour charges for straightening the coiled or bend up M.S. rod / HYSD bars confirming to Gr.Fe-500, cutting bending binding lapping placing welding etc. (Confirming to ISI specification) and jointing if necessary by lapping and tying the grills and placing in position as required for RCC work as per approved design hoisting lowering and laying in position including cost conveyance & taxes of M.S. rod / tor steel(Primary Producer like- SAIL/RINL/TATA/ JINDALSTEEL/ SHYAM STEEL) make) and binding wire of 18 to 20 gauge (as approved by the deptt.) weight of over lapping, couping, welded joints, spacer bar, chair, stage, hanger andbinding wires shall not be considered for payment at all. Standard co-efficient of different size of the steel shall be considered. Welding & lapping should be confirming to relevant clause of IRC 1987 in all floors. |
| 34 | i) Ground Floor |
| 35 | ii) 1st Floor |
| 36 | iii) 2nd Floor |
| 37 | Fly Ash brick masonary in cement mortar of (1:6) in Foundation & Plinth using bricks of 25x12x8 cm sizehaving crushing strength not less than 75kg/cm2 with dimensional tolerance + 2% including splays cutting circular moulding chamfering, corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at leastfor six hoursbefore use includingcost conveyance royalty taxes of all materials and cost of all labour with T&P required for the work as per specification & direction of Engineer-in-charge.) |
| 38 | Fly Ash brick masonary in cement mortar of (1:6) in Super Structure using bricks of 25x12x8 cm sizehaving crushing strength not less than 75kg/cm2 with dimensional tolerance + 2% including splays cutting circular moulding chamfering, corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at leastfor six hoursbefore use includingcost conveyance royalty taxes of all materials and cost of all labour with T&P required for the work as per specification & direction of Engineer-in-charge.) |
| 39 | i) Ground Floor |
| 40 | ii) 1st Floor |
| 41 | iii) 2nd Floor |
| 42 | Providing 16mm thick cement plaster in cement mortar (1:6)finished smooth to brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 43 | i) Ground Floor |
| 44 | ii) 1st Floor |
| 45 | iii) 2nd Floor |
| 46 | Providing 12mm thick cement plaster in cement mortar (1:6)finished smooth to brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 47 | i) Ground Floor |
| 48 | ii) 1st Floor |
| 49 | iii) 2nd Floor |
| 50 | Providing 6mm thick cement plaster in cement mortar (1:4)finished smooth to RCC work after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 51 | i) Ground Floor |
| 52 | ii) 1st Floor |
| 53 | iii) 2nd Floor |
| 54 | Providing 12mm thick cement plaster in cement mortar (1:4)finished smooth to brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 55 | i) Ground Floor |
| 56 | ii) 1st Floor |
| 57 | Providing 25 mm thick Grading Concrete (1:2:2) using10mm to 6mm size chips finished smooth on roof slab etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge |
| 58 | Supplying, fitting, fixing of Vitrified Tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mmx600mm Colour/printed series of approved make in floors on 20mm thick bed of cement mortar (1:4) and filling the joint with white cement mixed with pigment to match the shades of the tile including cost of all materials, taxes, labour, labour cess T&P erc. required for the work complete in all respect as per direction of the Engineer-in-charge. |
| 59 | i) Ground Floor |
| 60 | ii) 1st Floor |
| 61 | Supplying, fitting, fixing of Vitrified Tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mmx600mm Colour/printed series of approved make as directed by Engineer-in-charge in dados skirting and risers of steps on 12mm cement plaster (1:3)jointed with white neat cement slurry mixed with pigment to match the shades of the tile including rubbing and polishing etc.complete with cost, conveyance, royalities and taxes of all materials labour, labour cess complete in all respect. |
| 62 | i) Ground Floor |
| 63 | ii) 1st Floor |
| 64 | Supplying, fitting, fixing of Industrial Vitrified Tiles in floors, treads, steps and landing slab on 20mm thick bed of cement mortar (1:4) joined with neat cement slurry mixed with pigments to match the shades of the tiles including polishing the surface with cost, conveyance, royality and all taxes of all materials etc. complete as per direction of the Engineer-in-charge. |
| 65 | i) Ground Floor |
| 66 | ii) 1st Floor |
| 67 | Supplying, fitting, fixing of Kota Tiles in floors, treads, steps and landing slab on 20mm thick bed of cement mortar (1:4) joined with neat cement slurry mixed with pigments to match the shades of the tiles including polishing the surface with cost, conveyance, royality and all taxes of all materials etc. complete as per direction of the Engineer-in-charge. |
| 68 | i) Ground Floor |
| 69 | ii) 1st Floor |
| 70 | Supplying, fitting, fixing of Ceramic tiles (400mm x 400mm) coloured / printed series in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry etc. complete including polishing the surface with cost, conveyance, royality and all taxes of all materials etc. complete as per direction of the Engineer-in-charge. |
| 71 | i) Ground Floor |
| 72 | ii) 1st Floor |
| 73 | Supplying, fitting, fixing of Chequard Tiles in floors, treads, steps and landing slab on 20mm thick bed of cement mortar (1:4) joined with neat cement slurry mixed with pigments to match the shades of the tiles including, rubbing and polishing the surface with cost, conveyance, royality and all taxes of all materials etc. complete as per direction of the Engineer-in-charge. |
| 74 | Supplying fixing and fittings MS window grills, Doors, MS verandha grills and MS grill gate of approved design and drawing made out of MS flat and MS angle at work site with one coat of anticorrosive red oxide zink chrome primer including cutting holes in brick or RCC walls and fixing with CC (1:3:6) including cost conveyance royalty and taxes of all materials all labour T&P required for the work complete (payment will be made on weight basis only) |
| 75 | Grill |
| 76 | Door |
| 77 | Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD.) Casement Door – 60- Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 102 mm x 60 mm x 2.25 mm for casement Door Sash Profile and 74 mm x 60 mm x 2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistantaccessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including* cost and conveyance of all materials, accessories, labour charges materials andproduct conferming to ASTM D 638-14,EN-477-95 and other applicable codes and standards. |
| 78 | Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride(UPVC) ( FENESTA / NCL VEKA LTD.)Three Track - Three Panel sliding window– 60- Series duly manufactured using UPVC reinforced profiles of 108mm x 45 mm x 2.5 mm for outer frames and Window Sash of 39 mm x 58 mm x 2.5 mmcapable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistantand the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including* cost and conveyance of all materials, accessories, labour charges, materials andproduct conferming to ASTM D 638-14,EN-477-95 and other applicable codes and standards. |
| 79 | Providing fitting & fixingArmstrongceilling with aluminium anodised T section No.3215 with 2" - 0" center to center , L section No.1705 upto 15 micron on 4 walls to be fixed by means of steel screw grid 2"-0"" x 2"-0" suspended from ceiling etc complete as per direction of the Engineer-in-charge.. |
| 80 | Finishing wall surfaces of wall with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including basic cost, conveyance,of all materials, all labour, T&P. required for the work etc. including labour cess complete as per direction of the Engineer-in-charge |
| 81 | i) Ground Floor |
| 82 | ii) 1st Floor |
| 83 | Painting 2 coats with Plastic Emulsion paints by means of brush to inside surface of walls after cleaning the surface etc. complete in all floors including cost of all materials with all taxes and cost of all labour with T&P required for the work etc. complete in all respect as directed by Engineer – in – Charge. |
| 84 | i) Ground Floor |
| 85 | ii) 1st Floor |
| 86 | Painting two coats with weather coat paintof approved shade over a coat of primer by means of brush to outside surface of walls complete in all floors with cost, carriage and all taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect as per direction of the Engineer – in – Charge. |
| 87 | i) Ground Floor |
| 88 | ii) 1st Floor |
| 89 | iii) 2nd Floor |
| 90 | Painting two coats with Distemper of approved shade by means of brush to outside surface of walls complete in all floors with cost, carriage and all taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect as per direction of the Engineer – in – Charge. |
| 91 | i) Ground Floor |
| 92 | ii) 1st Floor |
| 93 | iii) 2nd Floor |
| 94 | Painting two coats with synthetic enamel paints over a coat of primer including cleaning the surface with sand papering and using paints of approvedquality and approved shade including cost conveyance taxes of all materials all labourT&P etc. complete as directed by the Engineer in charge. |
| 95 | i) Ground Floor |
| 96 | ii) 1st Floor |
| 97 | Providing, Fitting & Fixing of Stainless steel of 304 grade in hand Railing of 50mm outer diameter of 2mm thick of approved Quality & Specification with balustrade of size 32mmX32mmX2mm square pipes in rows including Cost,conveyance of all Materials, Labour ,T&P required for fabrication, buffing & polishing, cost of all fixtures etc. complete and as per specification & direction of Engineer-in-charge (In all floors) |
| 98 | Supplying, fitting, fixingPrecoated Tata Durashine blue sheet of 0.5mm thick in roof including labour for fixing of wind tiesas per approved design and specification, with the cost, conveyance taxses of all material, cost of all labour etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge. |
| 99 | Providing and fixing of Rain Water PVC down pipe of 100mm dia including fixing with cost of all materials etc complete as per specification and direction of Engineer in charge. |
| 100 | P.H. WORKS Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge |
| 101 | 20mm dia C - PVC pipe |
| 102 | Ground Floor |
| 103 | First Floor |
| 104 | 25mm dia dia C - PVC pipe |
| 105 | Ground Floor |
| 106 | First Floor |
| 107 | 32mm dia C - PVC pipe |
| 108 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge. |
| 109 | 15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) |
| 110 | 15 mm dia CP S.B. Bib cock(CON-CHR-037KN) |
| 111 | 15 mm dia CP L.B. Bib cock(CON-CHR-107KN) |
| 112 | 15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make) |
| 113 | 15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make) |
| 114 | 20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make) |
| 115 | 25mm dia brassfull way valve (Shakti make) |
| 116 | 32mm dia brassfull way valve (Shakti make) |
| 117 | 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make) |
| 118 | 40mm dia brassfull way valve (Shakti make) |
| 119 | 15mm CP Extension piece |
| 120 | 125mm CP grating |
| 121 | 15mm size C.P. flange |
| 122 | Supplying all materials, labour, T&P and fixing Rotational molded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting up to a height of 5 meters above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete (1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge |
| 123 | 2000 liter PVC water storage tank roof of 1st floor |
| 124 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge. |
| 125 | G.Floor |
| 126 | First Floor |
| 127 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proofas per P.H. specification and direction of Engineer-in-charge |
| 128 | G.Floor |
| 129 | First Floor |
| 130 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. |
| 131 | G.Floor |
| 132 | First Floor |
| 133 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge. |
| 134 | 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 135 | 110mm U-PVC‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 136 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 137 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 138 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 139 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 140 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 141 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 142 | 110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make) |
| 143 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 144 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI "p" or "s" trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. |
| 145 | 23" Orissa Pan( Hindware/Parryware/Neycer make) |
| 146 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge |
| 147 | 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 148 | Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including cutting the door & mending good the damages embedding the plate in 25mm. Cement mortar(1:8) laid over 150mm. Cement concrete(1:5:10) using 40mm hard granite metal including 6mm. Thick white cement finishing at the top of the urinal foot plate etc.all complete as per specification and direction of the Engineer in charge. |
| 149 | Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal. |
| 150 | Supplying all materials, labour, T&P and fixing vitreous china wash Down Water Closet (European type W.C. pan) with integral "P" or "s" trap to the flooe with wooden plug and chromium plated pedestal screws including kointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber bufferes including polishing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H. specification and diretion of EIC. |
| 151 | EWC (Hindware/Parryware/Neycer make) |
| 152 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered "Hot" and "Cold" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge |
| 153 | 550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal |
| 154 | Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. Porcelin Sink (600 x 450 x 200) |
| 155 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 156 | 25mmx600mm long CP towel rail |
| 157 | Towel ring |
| 158 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. |
| 159 | 600mmx125mm plate glass shelf CP/NP guard rail |
| 160 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. |
| 161 | 600mmx450mm Size Mirror. |
| 162 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 163 | CP soap holder |
| 164 | Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge. |
| 165 | ½” x 5” CP Shower |
| 166 | Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 167 | Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 168 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber ofinside size 760mmx760mmx460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-charge |
| 169 | Inside size 76cmx76cmx46cm with 18” dia RCC MH cover |
| 170 | Supplying all materials ,labour ,T&P and constructing gully trap chamber ofinside size 250mmx250mmwith 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinthand inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI gratingetc.all complete as per drawing,specification and direction of Engineer-in-charge |
| 171 | Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 12mm size crusher broken hard black granite metal including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 172 | Ground Floor |
| 173 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 174 | First Floor |
| 175 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( vetrified matt finished floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 60cmx60cm special printed seriesto be pre-approved by the Engineer-in-charge ) |
| 176 | Kajaria tile 60cmx60cm |
| 177 | Ground Floor |
| 178 | First Floor |
| 179 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 180 | Ground Floor |
| 181 | First Floor |
| 182 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( vetrified wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 60cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge ) |
| 183 | Kajaria glazed tile 60cmx30cm |
| 184 | Ground Floor |
| 185 | First Floor |
| 186 | Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finishstructural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material,The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre"s standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 187 | Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigmentscomplete in all respect as per specification and direction of the Engineer in charge |
| 188 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture"s specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge |
| 189 | 100mm dia P.V.C. pipe |
| 190 | 150mm dia P.V.C. pipe |
| 191 | Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. |
| 192 | MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover ) |
| 193 | Supplying all materials labour T&P and constructing 1.80m dia x 2.60 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 194 | Construction of 100 users septic tank |
| 195 | Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of theEngineer-in-Charge. |
| 196 | Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general. |
| 197 | Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer incharge. |
| 198 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 199 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 200 | Supplying all materials.labour.T&P and providing brick work in foundation and plinth with 25cmx12cmx8cm size Fly Ash bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge. |
| 201 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:3) onbrick work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 202 | Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 203 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 204 | Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 205 | In ground floor |
| 206 | Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 207 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:6) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 208 | Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls ofman hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge. |
| 209 | Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge |
| 210 | Construction of 1nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories |
| 211 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only |
| 212 | Drilling of 200mm dia bore |
| 213 | 00 mtr to 30mtr |
| 214 | 30 mtr to 45mtr |
| 215 | Drilling of 150mm dia bore |
| 216 | 45 mtr to 215.00mtr |
| 217 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. |
| 218 | Lowering of 200mm dia P.V.C casing pipes |
| 219 | 00 mtr to 30 mtrs |
| 220 | 30 mtr to 60mtr |
| 221 | Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber "O" ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. |
| 222 | 200mm dia PVC (sch-80) pipe |
| 223 | Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department) |
| 224 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge |
| 225 | By DTH Rig |
| 226 | Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation: |
| 227 | Rocky terrain with boulder formation for 300m depth |
| 228 | Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) |
| 229 | 1 H.P. Single phase/ three phase 3 stagehead renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby) |
| 230 | DOL Control panel |
| 231 | 40mm dia steel short piece |
| 232 | Well cap |
| 233 | 50mm size CI bracket |
| 234 | 2.50sqmm flat cable |
| 235 | 20mm dia rigid UPVC pipes |
| 236 | Steel rope with cover |
| 237 | Labour charges for lowering including transportation |
| 238 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceilingand floor all complete as per specification and direction of the Engineer in charge |
| 239 | 32mm HDPE pipes (Finolex/Supreme make) |
| 240 | E.I WORKS :- Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on modular GI box with modular base & cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels /HPL/ V Guard ) Group-A LP-93 |
| 241 | Group-BLP-124FP-31 |
| 242 | Group-C LP-99FP-30 ExFP-17 |
| 243 | Pointwiring for 5A /6Amp socket outlet with 2 X 1.5sq.mm FR PVCinsulated single core multistrand copper conductor of ISI marked in recess 20mm dia non-metallic PVC flexible conduit with modulartype switch, Phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor forloop earthing etc. as required (Make of wire -Finolex/ L&T/ Anchor/ Havells/V-Guard/HPL) |
| 244 | Supply and fixing of 6Amp plugwith 6Amp switch on existing board. (Modulartype)(Make-Great white/ Legrand / Roma/ Havells/ HPL/ Cona) |
| 245 | Supplying and fixing of 15/16 Amp Plug point Modular type on modular metal box on surface/Recess with suitable size of Modularcover in front including cutting the wall and making good the same in cases of recessed conduit as required(Make-Great white/ Legrand / Roma/ Havells/ HPL/ Cona) |
| 246 | s/f of ac point consisting of 0-32Astarter and modular socket with all connection compelete s per the direction of engineer in charge |
| 247 | Supplying and fixing of 3 nos 6 Amp Plug point 3 nos switch, 1 No 15 Amp Switch & 1 No 15 Amp Socket Modular type on modular metal box, base & cover with all connections.(Make-Great white/ Legrand / Roma/ Havells/ HPL/ Cona) |
| 248 | Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulatedsingle core multistrand copper conductoras earth wire as required.(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard//HPL) 2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia |
| 249 | 2 X 2.5 sq.mm +1 X 1.5 sq.mm-do- |
| 250 | 2 X 4 sq.mm +1 X 1.5 sq.mm -do- |
| 251 | 2 X 6 sq.mm +2 X 2.5 sq.mm in 25mm dia |
| 252 | 4x6 sq.mm +2x2.5 swmm in 32mm dia |
| 253 | 4x10 sqmm + 2x4 sqmm -do- |
| 254 | 1x1.5 mm2 for inverter wiring |
| 255 | Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 415V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) as per direction of Engineer in Charge make-HPL/ Havells/ Legrand /L&T/C&S.) 4(4+12) way double door |
| 256 | 4 way double door |
| 257 | Supply and fixing of 5Amp to 32A rating 240 V/415 V "B" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make-HPL/ Havells/ Legrand /L&T/C&S)as per direction of Engineer in ChargeSingle pole (SP) |
| 258 | 40 amp DP MCB |
| 259 | 32 amp DP MCB |
| 260 | 63 amp 4 pole MCB |
| 261 | Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC /AC single phase 230 volts complete as required. |
| 262 | S/F. Of 48"AC Ceiling fans including all connections and accessories of Usha Allure Dlx/Havells Pacer/Orient Summer Pride/Equivalent make |
| 263 | Supply and fixing of Modular Type fan regulator (Make-Cona/ Anchor/ Usha/Bajaj)as per direction of Engineer in Charge |
| 264 | Providing and fixing 100cm length extra down rod ofG.I. pipe 20 mm dia heavy gauge including painting etc as required . |
| 265 | S/F of 300mm exhaust fanin the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required of Usha/Orient/Havells/Equivalent make |
| 266 | S/F. Of 400mm Wall fans including all connections and accessories of Usha/Orient/Havells/Equivalent make |
| 267 | S/F of 18W/20W Basic all purpose surface and wall mounted LED batten with Aluminum housing & integrated electronic driver. (Make-Havells/Philips/Jaquuar or equivalent.) |
| 268 | S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose .as per direction of Engineer in Charge |
| 269 | s/f of 9/10 watt LED bulb (Make-Havells/Philips/Crompton/Equivalent)as per direction of Engineer in Charge |
| 270 | S/F of 18Watt Surface mounted LED downlighter with white powder coated aluminium housing with integrated electronic driver.(Make-Havells/Crompton/Philips/Bajaj/Equivalent) |
| 271 | S/F. of 45Wt. LED Street light fittings complete with G.I. bracket. Of Bajaj/Havells/Crompton/Philips make. |
| 272 | S/F. of 90Wt. LED Street light fittings complete with G.I. bracket. Of Bajaj/Havells/Crompton/Philips make. |
| 273 | S/F of 2"x2" 34W Environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling.(make-Philips/Crompton/Havells/Equivalent) |
| 274 | Supply of 25 sq mm 3-1/2 core PVC Armoured cables ISI marked as per direction of Engineer in Charge.(Make-Havells/Polycab/KEI/Equivalent) |
| 275 | Supply of 35 sq mm 3-1/2 core PVC Armoured cables ISI marked as per direction of Engineer in Charge.(Make-Havells/Polycab/KEI/Equivalent) |
| 276 | Supply of 70 sq mm 3-1/2 core PVC Armoured cables ISI marked as per direction of Engineer in Charge.(Make-Havells/Polycab/KEI/Equivalent) |
| 277 | Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KVgrade of size upto 25 sq.mm on surface as required. |
| 278 | Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KVgrade of size exceeding 25 sq.mm but not exceeding 120 sq.mm on surface as required. |
| 279 | Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size excedding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation , sand cushioning, protective covering and refilling the trench etc. as required. |
| 280 | Supply of 1.5 Ton Copper Split type A.C.machines of5- Star rated Daikin/Hitachi/Bluestar/Equivalent Make. |
| 281 | Supply and fixing of 5 KVA Volts Stabiliser ( 90-240V) ( Make- V-guard, Autotech)as per direction of Engineer in Charge |
| 282 | S/F of Extra Copper Pipe 5/8" for Installation of 1.5 Ton AC as per direction of Engineer in Charge |
| 283 | s/f of stand for out door unit as per direction of Engineer in Charge |
| 284 | Fixing Charge of AC Machine |
| 285 | Providing and fixing of Spike type Lightning Arrestor including all connections and accessories as per direction of engineer-in-charge |
| 286 | Supply of 70 sq mm singlecore Copper UnArmouredcables ISI marked.(Make-Polycab/Havells/Finolex/Equivalent) |
| 287 | Supply and fixing of Special Coper Plate (600*600*3.15mm with running coper flat 25*5mm long) Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as per the direction of the site engineer-in-charge |
| 288 | Supply, delivery and laying of 40mm HDPE pipe and cable inside the HDPE pipe as per construction standard specification and draning etc |
| 289 | Supplying and laying 25 mm x 5 mm copper strip on surface or in recess for connection etc as required. |
| 290 | Supply and fixing of copper logs for 70 sq.mm cable. |
| 291 | Supply,Installation, Testing and Commissioning of 62.5 kVA DG Set with AMF Panel including Pedestal,earthing and all other accessories and connections.(make-Jackson/Equivalent) |
| 292 | S/F of 40x42x12no 16/18 SWG sheet metal for main 250amp panel board having250 amp MCCB 36 KA as incommer,250 amp electrolyte cu bus bar,125 amp FP ChangeOver,125 amp electrolyte cu bus bar and 125A, 25 kA FP MCCB-2No.,63A, 16 kA FP MCCB-2No,40A DP MCB-6 No as Outgoing with ampere meter, voltmeter, toggler switch,three nos led indicator and as per the direction of site engineer in charge (make: Siemens / legrand/Schneider/Equivalent) |
| 293 | S/F of 36x30x10no 16/18 SWG sheet metal for main 125 amp panel board having125 amp MCCB 25 KA as incommer,63 amp FP MCB -3 No.,125 amp electrolyte cu bus baras Outgoing with ampere meter, voltmeter, toggler switch,three nos led indicator and as per the direction of site engineer in charge.(make: Siemens / legrand/Schneider/Equivalent)) |
| 294 | S/F of 36x30x10no 16/18 SWG sheet metal for main 63 amp panel board having63 amp MCCB 16 KA as incommer,40 amp FP MCB -3 No.,100 amp electrolyte cu bus baras Outgoing with ampere meter, voltmeter, toggler switch,three nos led indicator and as per the direction of site engineer in charge.(make: Siemens / legrand/Schneider/Equivalent)) |
| 295 | Supply and fixing of 4.5 kg CO2 type fire exstinguishers complete in all respect including initial fill and wall suspension brackets and shall confirm to IS 15683. make-safex/Minimax/Cease fire/Equivalent |
| 296 | Supply and fixing of ABC stroed pressure powder type fire extinguisher of 6 Kgs. Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with control discharge hose, wall mounting bracket etc. complete, confirming to IS:15683.(make-safex/Minimax/Ceasefire/Equivalent) |
| 297 | Supply, Installation, Testing and Commissioningof electric motor driven Tarrace pumpcapable to deliver 450 LPM at 36 mtr head 7.5 HP, 3 phase. Make - Kirloskar / KSB/Equivalent |
| 298 | Supply & fixing of 5000 ltr Fiber Water tanktriple layer unbrakable extra thick and flexible material for long life new UV threaded lid to keep dust particles out with all needed accessories.Make - ( Supreme/Equivalent ) as per the direction of Engineer in Charge . |
| 299 | Supplying, installation testing and commissioning of the following. ‘C" class MS pipe as per IS 1239 with welded / flanged /with heavy clamps, hangers, brackets or pipe supports as required including MS Pipe of shorter lengths, tapering connecting pieces, short or long bends, forged specials like sockets, elbows, reducers, plugs, Tees etc. Complete to make the system operative as required by LFA / TAC authorities.The pipes will have to be laid and fixed on walls, ceilings, into brick walls or RCC with lead anchor fasteners to the satisfaction of the Consultant/Client and painting two coats of approved shade(Post office red)of enamel paint over a coat of approved primer for over ground / overheads pipes.Make - TATA / Jindal/Equivalent |
| 300 | 100mm NB |
| 301 | 25mm NB |
| 302 | Supply and installation, testing and commissioningof CI Butterfly valves ( heavy ) conforming to IS 13095 ,PN1.6 tested to 1.5 times working pressure with necessary companion flanges, bolts, nuts, gasket packing, support and any other spares, includingindicator for open and shut position as per fire practice etc complete.Make- Kartar/Equivalent |
| 303 | 100 NB |
| 304 | Supply and installation, testing and commissioningof Isolation Sluice valves tested to ISI marked ,PN 1.6 with CI body, bonnet & brass trim parts, & having necessary companion flanges, bolts, nuts, gasket packing and any other spares, includingindicator for open and shut position to be installed abovegroundas per fire practice etc complete. Make - Kartar/Equivalent |
| 305 | 100mm NB |
| 306 | Supply and installation, testing and commissioningof NRV conforming to IS 5312 (swing type) with CI body & brass trim part, PN 1.6 having necessary companion flanges, CS hardwares. Gaskets, arrow indicating direction of flow, etc. complete. It shall be ISI Marked and approved make. Make - Kartar/Equivalent |
| 307 | 100mm NB |
| 308 | Supply, Installation,Testing and Commissioningof Pressure gauge of 0-14 / 16 Kgf/sq.cm. range with all accessories as per direction of Engineer-in-charge.Make - H guru/Equivalent |
| 309 | Supply, Installation,Testing and Commissioning of Pressure Switch with with all accessories as per direction of Engineer-in-charge. Make - Danfoss/Equivalent |
| 310 | Supply, Installation,Testing and Commissioning of 1" Air Release Valve with all accessories as per direction of Engineer-in-charge. Make - Kartar/Equivalent |
| 311 | Supply, Installation,Testing and Commissioning of 2 - way fire brigade connection with all accessories as per direction of Engineer-in-charge..Make - Kartar/Equivalent |
| 312 | Supply and installation, testing and commissioningof NRV conforming toAPI 594/598 (dual plate check type) with CI body & brass trim part, PN 1.6 having necessary companion flanges, CS hardwares. Gaskets, arrow indicating direction of flow, etc. complete. It shall be ISI Marked and approved. Make - Kartar/Equivalent |
| 313 | 100mm NB |
| 314 | Single headed hydrant valve as per IS 5290, made of SS with 63 mm dia instantaneous outlef of 80 mm dia flanged and hand wheels etc. complete.Make- kartar/Equivalent |
| 315 | 15 M long, 63mm dia RRL hose with instataneuos SS couplings and hoses shall be stored in side the hose cbinet . Make - CRC/Equivalent |
| 316 | 1no SS short branch pipe with nozzle. Make- kartar/Equivalent |
| 317 | M.S. Hose cabinet stand moulded type fabricated out of M.S. sheet of 16 SWG with glass fronted (4mm thick glass with clamp) door and size of the cabinet includes suitable all fasteners etc. and cabinet shall be powder coated of approved colour both inside and out side sizes 650 x 500 x 250 |
| 318 | Supply and installation, testing and commissioningoffirst aid fire hose reel of thermoplast braided suitably reinforced 20 mm size & 30 m standard length with 5 mm Shut off nozzle,Hose to be swinging type wall mounted drum including fixing with lead anchor fasteners & bolts (Including drum and swivel arrangement) etc complete.Hose reel having 30 mtr. Length with drum etc. complete. Make - Mitras/Equivalent |
| 319 | Supply and installation, testing and commissioningofBall ValveWith all accessories as per direction of Engineer - in - charge. Make - Kartar/Equivalent |
| 320 | 25 mm |
| 321 | 15 mm |
| 322 | Supply , Installation,Testing and Commissioning of MCC cum Starter control panel (7.5 HP)for Tarrace pump sets with incomer and selector switch for standby and working and auto/manual operation and necessary annunciationasper direction of Engineer-in-charge |
| 323 | Supply , Installation,Testing and Commissioning of power cable (3.5 C X 10 SQMM) as required for establishing automationPanel of the pump system as per direction of Engineer-in-charge. Make - Polycab/Equivalent |
| 324 | Supply , Installation,Testing and Commissioningof control cable (3C X 1.5 SQMM) as required for establishing automation of the pumping system as per direction of Engineer-in -charge. Make - Polycab/Equivalent |
| 325 | Supply, installation, testing and commissioning of Main Fire Alarm Control Panel (FACP), the panel shall be addressable analogue fire detection and alarm type with capacity of 1 loop complete with all accessories and battery back up for 48 hours in standby mode and 15 minutes in alarm condition. The panel shall have minimum of 80 character display. Each loop shall support 99 analog / addressable devices and 99 modules minimum as system capacity. The panel shall have TCP / IP facility. The panel shall be as per technical specification. The panel shall be UL/EN/FM approved. The quoted rate shall inclusive ofBacnet/Modbus interface for fire alarm panel with complete accessories.Make:Honeywell/ Morley/Equivalent |
| 326 | Supplying, installing, testing and commissioning of addressable Hooter Cum Strobeat 85 dBA @ 3m for Audible annunciation and 75cd flashing at 1 Hz for visual indication with all accessories etc., complete. The devise shall be UL/EN/FM approved. (Make:Honeywell/Tyco/Cooper/Edward/Siemens/Ravel/Equivalent) |
| 327 | Supplying, installing, testing and commissioning of addressable Manual call pointwith built in Monitor Module with all accessories complete. The device shall be UL/EN/FM approved.(Make:Honeywell/Tyco/Cooper/Edward/Siemens/Ravel) |
| 328 | Supplying, installing, testing and commissioning of 2C x 1.5 sq. mm, Twisted Pair PVC insulated FRLS Armored Cable with Accessories confirming to IS standards and specifications. The quoted rate shall includes ofAcrylic Fire stop Sealant in the opening for cablespassing throughfire compartment walls of RCC floors, masonry walls to provide up to 2 hours fire rating.(Make:Finolex/Havells/KEI/polycab/Equivalent) |
| 329 | SIGNAGE Floor identification signage ( i.e., GROUND FLOOR …etc.) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 15cm x 60cm. |
| 330 | Way to exit signage at each stair on every floor, indicating the direction of fire exit, lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 15cm x 60cm. |
| 331 | Supplying and installing of in position the signages " FIRE ORDER" it should contain the following matter on 3mm thick "Opaque" PVC foam board of computerized cut, PVC Non-reflective self adhesive vinyle painted foam board of 3" x 4". as per BIS Specification. a. A) evacuate the occupants by obeying fire exits / way to exit and emergency exits only and assemble at various assembly points. (B) if possible try to extinguish the fire by using nearest / suitable portable extinguisher or water from nearest wet riser. C) be calm and do not give any room from panic, walk, do not run. (D) if you encounter serious difficulty in evacuation, flat and try to attract attention of rescue team. |
| 332 | Supplying andinstalling of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC reflective self adhesive vinyle painted foam board, complete with mirror fasteners. |
| 333 | Fire hose reel (Size:6" X 4") |
| 334 | Supply, Installationof Fire bucket 3 nos with stand |
| 335 | Supply, Installation of Pump protection shed on terrace made by structural steel & sheet |
| 336 | Supplying, installing, testing and commissioning of6 Watt wall mounted speakers with built in line matching transformer, grill flush mounting type in side the utility rooms.Make - Honeywell/Equivalent |
| 337 | Supplying, installing, testing and commissioning solid state Amplifier of 480 W RMS out put in rack, including necessary control wires, jocks etc. complete. Make - Honeywell/Equivalent |
| 338 | Supplying, installing, testing and commissioning of P.A. Console 8 zone shall expandable up to 60 zones , with priority module micro processor based, mixing amplifier, with 6 zone for suitable selection module, power supply unit & goose neck micro phone etc. Make - Honeywell/Equivalent |
| 339 | Supplying, installing, testing and commissioning of P.A. Call station of 8 zones with priority module micro processor based & goose neck micro phone etc shall be located in the reception / security for the announcement necessary communication cable/CAT 6 shall be considered from PA controller to call station . Make - Honeywell/Equivalent |
| 340 | Supplying, installing, testing and commissioning of 19" Rack 650mm depth, 16U high amplifier rack assembly made of aluminum channel equivalent to euro rack system, with side and rear panels made of 14 swg powder coated sheet steel front transparent persplexdoor and with rails, rollers & bearings. Fans shall provided at the top for ventilation side panels will be ventilated type. The rack shall be powder coatedof approved color and spare "U" shall be covered with blank panels. |
| 341 | Supply , Installation,Testing and Commissioningof Flexible wire(2 RUNX 1.5 SQMM) as required forPA System as per direction of Engineer-in -charge. Make - Polycab/Equivalent |
| 342 | Supplying, installing, testing and commissioning approved make PVC FRLS conduits on ceiling / wall / floor etc. complete with accessories like, Junction boxes, Collars, Bends etc. 20mm dia. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
