|
| 1 | Comprehensive Annual Maintenance Contract for fire fighting system installed at above cited building including per month/ fortnightly/ weekly visit by Engineer with Technician and helper as indicated and whenever required or in case of any defect in the system. Also includes servicing, maintenance and testing and Cleaning of the System as required for proper working condition round the clock etc. complete in all respect to the entire satisfaction of Fire officer. The detailed lists of existing equipments are available at concern Fire Control Room or at site. |
| 2 | 1. Shaheed Bhagat Singh Place2. Talkatora Stadium (Old and New Building) 3. Shivaji Stadiuma) Engineer - 1 No. - 01 Visit / Fortnightlyb) Technical Foreman - 01 No. - 01 Visit/ Weekc) Helper - 02 Nos. - 1 Visit (Each)/ WeekNote 1: Atleast 01 Visit/Week is required by 01 Technician and 02 Helpers and fortnightly by the Engineer. |
| 3 | Engineer |
| 4 | Technician |
| 5 | Helper |
| 6 | 1. Mandir Marg Barat Ghar, 2. Moti Bagh Barat Ghar, 3. Khan Market Barat Ghar4. Lodhi Colony Barat Ghar 5. Kaka Nagar Barat Ghar 6. Community Centre Babar Road7. Swati Working Girls Hostel8. Community Centre Golf Link Club.a) Engineer - 1 No. - 01 Visit / Fortnightlyb) Technical Foreman - 01 No. - 01 Visit / Weekc) Helper - 01 No. - 1 Visit / WeekNote 1: Atleast 01 Visit/Week is required by 01 Technician and 01 Helper and fortnightly by the Engineer.Note 2: 01 Visit shall be considered for visiting / checking Fire Fighting System of Each Building individually. |
| 7 | Engineer |
| 8 | Technician |
| 9 | Helper |
| 10 | Replacement / Providing, laying, testing & commissioning of \"C\" class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : |
| 11 | 25 mm dia. |
| 12 | 32 mm dia. |
| 13 | 50 mm dia. |
| 14 | 80 mm dia. |
| 15 | 100 mm dia. |
| 16 | 150 mm dia. |
| 17 | 200 mm dia.(wall th. =6.3mm) |
| 18 | 300 mm dia.(wall th. =7.1mm) |
| 19 | Providing laying, testing & commissioning of \"C\" class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required |
| 20 | 150 mm dia |
| 21 | Rewinding of 3 Phase, 50 HZ 440 Volt monoblock/main pump set of 3000 RPM including providing, fixing / commissioning of insulated copper winding wire (Wire –ATLAS or equivalent) of required size and capacity ( burnt copper wire shall not be returned to the deptt.) with providing suitable grade varnish (Doctor back make or equivalent ), packing papers, sleeves etc. The work including dismantling of existing motor with proper tools, cartagecharge & labour charges etc and providing and fixing of nuts bolt of required size and proper alignment of the entire satisfaction Fire Officer. |
| 22 | 5 HP Capacity |
| 23 | 7.5 HP Capacity |
| 24 | 10 HP Capacity |
| 25 | Repairing of Jockey/Main/Diesel pump of following with replacement/repairing of mechanical seal, ball bearing, gun metal sleeve, impeller welding & smoothing of S.S. shaft, including carriage of heavy fire pump from pump room to the workshop by mechanical transport including loading, unloading through chain pully etc. and dismantling of pump set and refixing the same after repairing etc. complete to the entire satisfaction of Fire Officer. |
| 26 | 5 / 7.5 HP |
| 27 | 10 HP |
| 28 | Replacement / Providing, Fixing, testing & commissioning of various following type MCB 3/4 Pole, 415 volt, 50 HZ type L&T/Schneider Electric make or equivalent including dismantling of burnt MCB, connection, wiring, thimble etc. complete to the entire satisfaction of Fire Officer. |
| 29 | 32 Amp |
| 30 | 63 Amp |
| 31 | Replacement / Providing, Fixing, testing & commissioning of Lead Acid Battery Exide/Amron/ Luminous (Heavy Duty) make of 12 volts, 20 plates and 150 AH fully charged for operation of D.G.Set/Diesel driven pump installed fire pump room including battery terminator and connecting copper cables of approved quality and including dismantling battery etc. as required at site & making necessary connection complete in all respect to the entire satisfaction of Fire Officer. |
| 32 | Replacement / Providing, Fixing, testing & commissioning of Pressure Gauge in the main pipe line etc. complete to the entire satisfaction of Fire Officer. |
| 33 | Replacement / Providing, Fixing, testing & commissioning of single headed gun metalinternal hydrant valve with instantaneous Gunmetal coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required. |
| 34 | Replacement / Providing, Fixing, testing & commissioning of Single headed gunmetal external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required. |
| 35 | Supplying and fixing Single headed Single headed Stainless steel internal / external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Stainless Steel cap and chain as required etc. complete to the entire satisfaction of Fire Officer / Engineer-In-Charge. |
| 36 | Replacement / Providing, Fixing, testing & commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required. |
| 37 | 40 mm dia. |
| 38 | 50 mm dia. |
| 39 | 65 mm dia |
| 40 | 80 mm dia. |
| 41 | 100 mm dia. |
| 42 | 150 mm dia. |
| 43 | Replacement / Providing, Fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : |
| 44 | 80 mm dia. |
| 45 | 100 mm dia. |
| 46 | 150 mm dia. |
| 47 | 200 mm dia |
| 48 | Replacement / Providing, Fixing, testing & commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : |
| 49 | 65 mm dia |
| 50 | 80 mm dia. |
| 51 | 100 mm dia. |
| 52 | 150 mm dia. |
| 53 | 200 mm dia |
| 54 | Replacement / Providing, Fixing, testing & commissioning of 63 mm dia, 15 m long Gun Metal RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required |
| 55 | Replacement / Providing, Fixing, testing & commissioning of first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 1258520 mm nominal internal dia gun metal globe valve & nozzle.Drum and brackets for fixing the equipmets on wall.Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.a) 30 M |
| 56 | Replacement / Providing, Fixing, testing & commissioning of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : |
| 57 | 4 way - 150 mm dia M.S. Pipe |
| 58 | Replacement / Providing, Fixing, testing & commissioning ofair vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. |
| 59 | Replacement / Providing, Fixing, testing & commissioning of 15mm dia (Pendent Sprinkler) quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories |
| 60 | Replacement / Providing, Fixing, testing & commissioning ofpressure switch in M.S. pipe line including connection etc. as required. |
| 61 | Replacement / Providing, Fixing, testing & commissioning of flow switch in following sizes M.S. pipe including connection etc as required. |
| 62 | 100 mm dia. |
| 63 | 150 mm dia. |
| 64 | Replacement / Providing, Fixing, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. |
| 65 | 700 mm |
| 66 | 1000 mm |
| 67 | Replacement / Providing, Fixing, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required. |
| 68 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work |
| 69 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 70 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete as specified. |
| 71 | P/F/T/C of Fire Hose Cabinet fabricated from 16 SWG M.S. Sheet with front double door opening complete with 4 mm thick glass, key and painting complete to the entire satisfaction of Fire Officer. |
| 72 | 600 x 900 x 500 mm |
| 73 | Dismantling of Fire Hose Cabinet of any size with landing valve, Butterfly Valve etc. complete including staking of material at site to the entire satisfaction of Engineer-in-charge /Fire Officer. |
| 74 | Refixing of Fire Hose cabinet with Landing Valve, Butterfly valve etc. including welding in hydrant line as required completeto the entire satisfaction of Engineer-in-charge / Fire Officer (Dismantled Fire Hose Cabinet shall be supplied by the department free of cost). |
| 75 | P/F/T/C of Stainless Steel Body Female Adaptor ISI marked for single headed landing valve / fire inlet etc. complete to the entire satisfaction of Fire Officer / Engineer-In-Charge. |
| 76 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. |
| 77 | 80 mm Dia. |
| 78 | 200 mm Dia. |
| 79 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead |
| 80 | Refixing of old existing Chequered plates of 5 mm to 8 mm thick including repairing, removal of dents making strait edges making holes of required dia for providing M.S. handle of 600 mm long 16 mm dia round bar etc. complete including placing in position and welding wherever required in all respect to the entire satisfaction of Engineer-In-Charge / Fire Officer. (Cost of M.S. Handle shall be paid sepretely and old chequered plates shall be suppllied by the free of cost) |
| 81 | Dismantling D.Q Stone flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 82 | Replacement / Providing, Fixing, testing & commissioning of tyre coupling, rubber bush and fixing the pump in proper alignment, line and level by providing suitable size of nuts and bolts etc. complete to the entire satisfaction of Fire Officer. |
| 83 | 20 HP Capacity |
| 84 | Above 20 HP to 100 HP Capacity |
| 85 | Replacement of damaged gun metal/Stainless Steel shut off nozzle with 5mm orifice as per specification in the existing hose reel etc. complete to the entire satisfaction of Fire Officer. |
| 86 | Replacement / Providing, Fixing, testing & commissioning of CO2 Washer in horn of fire extinguisher etc. complete to the entire satisfaction of Fire Officer. |
| 87 | Replacement / Providing, Fixing, testing & commissioning of Hose Reel S.S. Clamp etc. complete to the entire satisfaction of Fire Officer. |
| 88 | Replacement / Providing, Fixing, testing & commissioning of Gasket in landing valve after removing and refixing the same of shaft etc. complete to the entire satisfaction of Fire Officer. |
| 89 | Replacement / Providing, Fixing, testing & commissioning of G.I. Union, band and socket etc. in G.I. pipe including cutting and threading the pipe and making long screws etc. complete to the entire satisfaction of Fire Officer.a) 25 mm dia |
| 90 | Dismantling, Repairing and Servicing of D.G. Engine self, changing of damaged armature and making connection to D.G. Fire Engine etc. complete to the entire satisfaction of Fire Officer. |
| 91 | Replacement / Providing, Fixing, testing & commissioning of Battery Charger suitable for double battery system upto 180 AH of 12 volt / 25 plate heavy duty etc. complete to the entire satisfaction of Fire Officer.100 HP to 150 HP |
| 92 | Complete servicing of Diesel driven fire engine of model DSM, Kirloskar make/ Leyland make including replacement of air filter, fuel filter, oil filter by pass filter and packing including Replacement / Providing, Fixing, testing & commissioning ofservicing kit and replacement of engine oil as per capacity of fire engine of approved grade & quality including labour charges as required at site and making the diesel driven fire engine in proper working condition and complete in all respect to the entire satisfaction of Fire Officer. |
| 93 | 60 HP to 100 HP (Incl. 100 HP) |
| 94 | Above 100 HP to 150 HP |
| 95 | Complete servicing / overhauling and Fixing of Diesel Driven Fire Engine due to oil seal leakage and filling of water in the Fire Engine of model DSM, Kirloskar make including replacement of all filter kit, piston, piston ring, liner, rod, ring, head, gasket, seal set complete, thimble, Hose pipe, packing and repairing of bearing sets, pump injector etc. complete and providing & fixing items in the engine whenever necessary and replacement of engine oil (Castrol 40W) coolant as per capacity of fire engine of approved grade & quality including labour charges as required at site and making the diesel driven fire engine in proper working condition etc. complete to the entire satisfaction of Fire Officer. Above 100 HP |
| 96 | Replacement / P/F/T/C of Motor Control panel of cubical construction floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalized with hinged lockable doors, dust & vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with solid aluminium strip/single core PVC insulated FRLS copper conducted cable, having suitable mounting for switch hear & accessories & internal control (relay, timer, sensor annunciation window for fault indication ON/OFF/TRIP indication along with suitable conductors, overload protection, current sensing type single phase preventer & colour coded power wiring with suitable size fire retardant low smoke PVC insulated copper cable with conductor, earth terminals, numbering suitable for operation on 415V, 3 phase, 50 HZ AC supply with enclosure protection class IP 42 complete as per satisfaction. Starter meter, selector switches, indicating LED with terminal facilities for repeat indicator of various audio & visual at terrace level & remote push button for ON/OFF operation in Fire Control Room etc. complete to the entire direction and satisfaction of Enginner in-Charge / Fire Officer. Suitable for Terrace pump - 02 Sets |
| 97 | Dismantling of Damaged Radiator of Diesel Fire Pump of model DSM( Kirrloskermake & equivalent) and Providing / Fixing / Commissioning new radiator for suitable Diesel Fire Pump etc. complete to the entire satisfaction of Fire Officer. |
| 98 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position including two coats of synthetic enamel paint over one coat of red oxide primer etc. complete all as specified and asper direction of Fire Officer/Engr-in-Charge |
| 99 | Replacement / Providing, Fixing, testing & commissioning of submersible pump of 1.50 HP working on 50Hz frequency of model CORA 100 XUMA LX(S) Single phase with the following specifications:a) Pump Type : CORA 7C/7Gb) RatedCurrent : 10Ac) Overall Length : 862mmd) Weight: 18 Kge) FlowRate :6 m3/hrf) Head:37 m |
| 100 | Credit of unservicable material i.e. M.S. Pipe, butterfly valve, sluice valve, hose reel drum, air vessel etc. including dismantling the same etc complete in all respect to the entire satisfaction of Fire Officer. |
| 101 | Credit of dismantle battery including brass terminal required size and disconnection cables etc. complete in all respect to the entire satisfaction of Fire Officer. |
| 102 | Credit of unserviceable pressure gauges including dismantling the same etc complete in all respect to the entire satisfaction of Fire Officer. |
| 103 | Credit of old unserviceable submersible pump, Timer etc |
| 104 | Credit of unserviceable internal landing valve and external yard hydrant (gun metal obtained from any of the items) including dismantling the same etc complete in all respect to the entire satisfaction of Fire Officer. |
