Rural Development And Panchayats Department has published Tender For Devlopment /Improvement Of Cfc Building Gulgam With Fencing Under (Btv3 Contribution) Adv Cost;. 7.80 Lacs. Submission Date for this Tender is 10-12-2022. Building Work Tenders in kupwara Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by engineer in charge |
| 2 | Providing and laying of stone soling (hand packed tightly ) incliuding all carriages of Material upto site of work complete Job by MT as well as HL |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including all carriages |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including all carriages |
| 5 | Centering and shuttering incl. strutting propping etc and removal off form work for:- Foundation footings ,bases of columns, up to plinth level etc |
| 6 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size including all carriages |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level using fe 415 TMT Bars including all carriages |
| 8 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 9 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows including 12mm thick prelamanated partical board decarative both faces . Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. KD wood including nails almunium fittingsand L drop 300 mmo |
| 10 | 15 mm th cement plaster in 1: 6 mixoverbrick masonary |
| 11 | painting winth two or more coats including a of priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 12 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 13 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 14 | Making plinth protection with common burnt clay bricks of class designation 7.5 laid on edge in cement mortar 1:6 (1 cement : 6 coarse sand) with 12 mm thick bed of cement mortar 1:6 (1 cement : 6 coarse sand) over 75 mm bed of dry brick aggregate 40mm nominal size rammed, consolidated and grouted with fine sand. The top of bricks pointed with cement mortar 1:3 (1cement: 3 fine sand) and curing complete. |
| 15 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 16 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 40 mm thick |
| 17 | painting winth two or more coats including a of priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 18 | Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 3.5 mm thk |
| 19 | Providing and fixing of eves boardingBadloo wood10"wide and 1" thick |
| 20 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer, |
| 21 | roviding and laying flamed finish Granite stone flooring in required design and patterns,l drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : commercial granitewith moldingrubbing etc complete job as per direction |
| 22 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 23 | providing and fixing 12mm thick ply wood ceilings including nails wooden coronice and KD wood frame work base whereever requied |
| 24 | Carriage of material by M/T |
| 25 | stone Agg average lead10km |
| 26 | Sand average lead 10km |
| 27 | Bricks from Budgam lead 125 kms |
| 28 | P/F wash basin with CI/ MS brackets 15mm C.P brass pillar taps Kingstone/ ecm/ techno/ parko/ ISI/ escko 32mm CP brass waste of standard patter including painting of fittings and brackets cutting & marking good the walls wherever required washbasin size 630x450mm with a pair of 15mm CP brass pillar taps, including all leads, lifts, costs & carriages of materials upto site of work complete job (ISI Standard Quality). |
| 29 | roviding and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings |
| 30 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 31 | P/F of PVC waste pipe for sink or wash basin including PVC waste fittings complete 40mm dia, including all leads, lifts, costs & carriages of materials upto site of work complete job. |
| 32 | P/F of CP Brass Soap dish with brackets includign cost of PVC Plug and screw complete job, including all leads, lifts, costs & carriages of materials upto site of work complete job. |
| 33 | P/F 100mm dia S & S, PVC (Prince Quality) ISI mark standard quality, soil, waste and ventilating pipe, including all leads, lifts, costs & carriages of materials upto site of work complete job. |
| 34 | P/F 75mm dia S & S, PVC (Prince Quality) ISI mark standard quality, soil, waste and ventilating pipe, including all leads, lifts, costs & carriages of materials upto site of work complete job. |
| 35 | P/F GI Pipe complete with GI fittings and clamps including cutting and making good the walls etc, including all leads, lifts, costs & carriages of materials upto site of work complete job. |
| 36 | 15mm dia nominal bore |
| 37 | 20mm dia nominal bore |
| 38 | P/F 15mm ball valve brass of approved quality, including all leads, lifts, costs & carriages of materials upto site of work complete job. |
| 39 | Construction of brick masonary main hole 1"x1"wth pvc cover and 12 mm thick plaster in 1:3 mix including all carriages complete job |
| 40 | P/F CP brass bib cock of approved make (ISI Standard) confirming to IS 8931 15mm nominal bore, including all leads, lifts, costs & carriages of materials upto site of work complete job. |
| 41 | provision for pvcfittings 4"" ,3" etcwith other unseen items |
| 42 | Providing and fixing of Community Inforamtion board (CIB) And photographs ( 5x7) 8 nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
