|
| 1 | Removing old lime or cement plaster from wall including cracking joint 12mm deep and removing debrise within 50 metre lead |
| 2 | E/W in foundation in hard soil within 50mt initial lead & 1.5mt initial lift including rough dressing & breakingof clouds to maximum 5cm to 7cm in size & laying layers not exceeding 0.3mt depth etc. and as per direction of Engeneer I/C |
| 3 | Fillingfoundation & plinth with coarse sand including watering and ramming & including all cost carriage royalty taxes of sand etc complete. |
| 4 | Cement concreete(1:4:8)using 40mm size C.B.G. metal in F&P including all cost , carriage, royalty taxes etc. complete excluding E.Costfor cement. |
| 5 | Brick work with cement mortar (1:6) by using Fly ash Brick of 23cmx11cmx8cm having crusing strength no less than 75kg/cm2 with dimentional tolerance +- 2% cost,conveyances, taxesetc. complete as per PWD Speicification & direction of the Engineer-in-Charge. |
| 6 | Cement concrete (1:2:4) with 12mm. Size hard broken granite chips (Crusher broken) including all cost, conveyance , royality etc. complete. |
| 7 | R.C.C. work of M 20 using 20mm and down graded hard granite Crusher broken chips including laying, hoisting, Centring & shuttering with all cost, conveyance etc. complete. |
| 8 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. |
| 9 | Supplying ,fitting and fixing 80mm factory made cement concreteinter locking paver block of m30 grade by Block making machine with strong vibratarycompacted of a approve size design and shape laid in requred pattenrndied and mouding 50 mm thickof badcoarse sand etc. all complete as per direction of Engineer-in Charge.(item no 1668 Page no 1042,CPWD 2016 |
| 10 | Providing and fixing Ceramictiles (above 0.1 Sqm.) in floors, treads or steps and landing on 25 mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles as directed by the Engineer-in-charge. |
| 11 | Providing and fixing tiles in walls on 12 mm thickcement plaster mortar (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing completeas directed by the Engineer-in-charge. |
| 12 | Finishing wall surface of walls with cement based wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 13 | Wall painting 2 coats with weather coat of approved shade on new workto give an even shade including cost of weather coat etc complete. |
| 14 | Painting of Iron door window with approved enamel paint over one coat of primer including all cost |
| 15 | Supplying fitting and fixing of sanitary fittings with all cost, Wash basin |
| 16 | Soap stand |
| 17 | howk bar |
| 18 | Hanger |
| 19 | Glass mirror |
| 20 | Exusht fan |
| 21 | Repair of electrical work and labour charges |
| 22 | Sanitary iteam and 1000 ltr water storage tank |
| 23 | Water motor pump of 0.5 h.p |
| 24 | Near nuabandhapada in ward no 06 |
| 25 | Removing old lime or cement plaster from wall including cracking joint 12mm deep and removing debrise within 50 metre lead |
| 26 | E/W in foundation in hard soil within 50mt initial lead & 1.5mt initial lift including rough dressing & breakingof clouds to maximum 5cm to 7cm in size & laying layers not exceeding 0.3mt depth etc. and as per direction of Engeneer I/C |
| 27 | Fillingfoundation & plinth with coarse sand including watering and ramming & including all cost carriage royalty taxes of sand etc complete. |
| 28 | Cement concreete(1:4:8)using 40mm size C.B.G. metal in F&P including all cost , carriage, royalty taxes etc. complete excluding E.Costfor cement. |
| 29 | Brick work with cement mortar (1:6) by using Fly ash Brick of 23cmx11cmx8cm having crusing strength no less than 75kg/cm2 with dimentional tolerance +- 2% cost,conveyances, taxesetc. complete as per PWD Speicification & direction of the Engineer-in-Charge. |
| 30 | Cement concrete (1:2:4) with 12mm. Size hard broken granite chips (Crusher broken) including all cost, conveyance , royality etc. complete. |
| 31 | R.C.C. work of M 20 using 20mm and down graded hard granite Crusher broken chips including laying, hoisting, Centring & shuttering with all cost, conveyance etc. complete. |
| 32 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. |
| 33 | Supplying ,fitting and fixing 80mm factory made cement concreteinter locking paver block of m30 grade by Block making machine with strong vibratarycompacted of a approve size design and shape laid in requred pattenrndied and mouding 50 mm thickof badcoarse sand etc. all complete as per direction of Engineer-in Charge.(item no 1668 Page no 1042,CPWD 2016 |
| 34 | Providing and fixing Ceramictiles (above 0.1 Sqm.) in floors, treads or steps and landing on 25 mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles as directed by the Engineer-in-charge. |
| 35 | Providing and fixing tiles in walls on 12 mm thickcement plaster mortar (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing completeas directed by the Engineer-in-charge. |
| 36 | Finishing wall surface of walls with cement based wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 37 | Wall painting 2 coats with weather coat of approved shade on new workto give an even shade including cost of weather coat etc complete. |
| 38 | Painting of Iron door window with approved enamel paint over one coat of primer including all cost |
| 39 | Supplying fitting and fixing of sanitary fittings with all cost, Wash basin |
| 40 | Soap stand |
| 41 | howk bar |
| 42 | Hanger |
| 43 | Glass mirror |
| 44 | Exusht fan |
| 45 | Repair of electrical work and labour charges |
| 46 | Sanitary iteam and 1000 ltr water storage tank |
| 47 | Water motor pump of 0.5 h.p |
| 48 | Near Ahimsha club in Ward No 10 |
| 49 | Removing old lime or cement plaster from wall including cracking joint 12mm deep and removing debrise within 50 metre lead |
| 50 | E/W in foundation in hard soil within 50mt initial lead & 1.5mt initial lift including rough dressing & breakingof clouds to maximum 5cm to 7cm in size & laying layers not exceeding 0.3mt depth etc. and as per direction of Engeneer I/C |
| 51 | Fillingfoundation & plinth with coarse sand including watering and ramming & including all cost carriage royalty taxes of sand etc complete. |
| 52 | Cement concreete(1:4:8)using 40mm size C.B.G. metal in F&P including all cost , carriage, royalty taxes etc. complete excluding E.Costfor cement. |
| 53 | Brick work with cement mortar (1:6) by using Fly ash Brick of 23cmx11cmx8cm having crusing strength no less than 75kg/cm2 with dimentional tolerance +- 2% cost,conveyances, taxesetc. complete as per PWD Speicification & direction of the Engineer-in-Charge. |
| 54 | Cement concrete (1:2:4) with 12mm. Size hard broken granite chips (Crusher broken) including all cost, conveyance , royality etc. complete. |
| 55 | R.C.C. work of M 20 using 20mm and down graded hard granite Crusher broken chips including laying, hoisting, Centring & shuttering with all cost, conveyance etc. complete. |
| 56 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. |
| 57 | Supplying ,fitting and fixing 80mm factory made cement concreteinter locking paver block of m30 grade by Block making machine with strong vibratarycompacted of a approve size design and shape laid in requred pattenrndied and mouding 50 mm thickof badcoarse sand etc. all complete as per direction of Engineer-in Charge.(item no 1668 Page no 1042,CPWD 2016 |
| 58 | Providing and fixing Ceramictiles (above 0.1 Sqm.) in floors, treads or steps and landing on 25 mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles as directed by the Engineer-in-charge. |
| 59 | Providing and fixing tiles in walls on 12 mm thickcement plaster mortar (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing completeas directed by the Engineer-in-charge. |
| 60 | Finishing wall surface of walls with cement based wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 61 | Wall painting 2 coats with weather coat of approved shade on new workto give an even shade including cost of weather coat etc complete. |
| 62 | Painting of Iron door window with approved enamel paint over one coat of primer including all cost |
| 63 | Supplying fitting and fixing of sanitary fittings with all cost, Wash basin |
| 64 | Soap stand |
| 65 | howk bar |
| 66 | Hanger |
| 67 | Glass mirror |
| 68 | Exusht fan |
| 69 | Repair of electrical work and labour charges |
| 70 | Sanitary iteam and 1000 ltr water storage tank |
| 71 | Water motor pump of 0.5 h.p |
