Military Engineer Services-MES has published Tender For Repair/Replacement And Maintenance Of Fire Fighting System, Fire Alarm Panel, Detector And Connected Allied Works Outside Fw And Various Pump Sets And Connected Allied Works Inside Fw Under Ge (Fw) Kolkata.. Submission Date for this Tender is 02-01-2023. Fire Alarm Systems Tenders in kolkata West Bengal. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 06-Dec-2022 | BOQ Corrigendum | BOQ | 21-12-2022 |
| 2 | 21-Dec-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-12-2022 |
| 3 | 28-Dec-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-01-2023 |
| Sl. No. | Item Description |
| 1 | Demolition of Cement Concrete (un-reinforced) in Ground Floors and Pavings not exc. 150mm thickness (above or below Ground Level), complete all as specified anddirected. |
| 2 | Dismantling of Centrifugal Pump set of capacity 60 to 100HP (Make: Kirloskar),electric driven AC 3 phase, 415 Volts,transporting to workshop, dismantling, removing the burnt out windings, cleaning the starter slots and rewinding with super enamelled copper wire of suitable gauge, insulating, proper heat varnishing, re-assembling and re-installing the pump set complete in existing position complete all as specified and directed by the Engineer-in-Charge. |
| 3 | S&F in repair gun metal double male / female suction hose coupling, 63 mm dia, ISI marked, complete all as specified and as directed by the Engineer-in-Charge. |
| 4 | S&F in repair 63 mm dia gun metalbranch pipe, instantenous inlet, male threaded outlet, 15 mm bore nozzle long suitable for fire hydrant, complete all as specified and as directed by the Engineer-in-Charge. |
| 5 | S&F in repair Zone card for conventional fire alarm control panel upto 24 zones, complete all as specified and as directed by the Engr-in-Charge. |
| 6 | S&F in repair 18 SWG thick mild steel hose box of size 800 mm x 600 mm x 250 mm, double door with 4 mm thick glass and door frame made of 16 guage MS sheet painted fire red outside and brilliant white inside yard suitable for 2 numbers 63 mm dia hose and 01 number branch pipe, including writingthe BOX Sl no with synthetic enamel paint as per sample complete all as specified and as directed by the Engineer-in-Charge. |
| 7 | S&F inrepairsPVC Conduit of 25mm dia (medium grade) for fire fighting wiring complete all as specified and as directed by the Engineer-in-Charge. |
| 8 | S&F in repairConventional type Smoke Detector including base as specified and as directed by the Engineer-in-Charge. |
| 9 | S&F in repairConventional type Heat Detector including base complete all as specified and as directed by the Engineer-in-Charge. |
| 10 | S&F in repairConventional type Manual Call Point complete all as specified and as directed by the Engineer-in-Charge. |
| 11 | S&F in repair fire alarm sounders/sirens /hooter housed in 16 SWG sheet enclosure, electronic type horizontal single stage continous normal operation for atleast 50 minutes with sound level 65 DB to 120 DB measured at 1.5 Mtr with sound output variation of + 5 DB 500 mtr range suitable for fire alarm control panel complete all as specified and as directed by the Engineer-in-Charge. |
| 12 | S&F in repair PVC insulated armoured copper conductor cable size 1.5 sqmm 2 core FRLS, 1100 volts fixed on wall/cellingwith fixing accessories complete all as specified and as directed by the Engineer-in-Charge. |
| 13 | Excavation in trenches in soft / loose soil not exceeding 1.5 metre wide for foundation etc or for shafts, wells cesspits, manholes etc not exceeding 10 Sqm on plan and not exceeding 1.5 metre in depth and getting out as directed by the Engineer-in-Charge. |
| 14 | Returning, filling in, including spreading levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed by the Engineer-in-Charge. |
| 15 | Removing excavated material not exceeding 50 metre and deposited where directed at a level not exceeding 50 metre above the starting point in soil complete all as specified and as directed by the Engineer-in-Charge. |
| 16 | M&L for PCC, 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete including dismantling of existing concrete complete all as specified and as directed by the Engineer-in-Charge. |
| 17 | M&L for brick work using fly ash bricks, straight or curved on plan exceeding 6 metre mean radius, built in cement mortar 1:6, incl demolition of existing brickwork and removal of debris from site complete all as specified and as directed by the Engineer-in-Charge. |
| 18 | M&L for 10 mm thick rendering in cement mortar (1:6) to fair faces of brick or concrete wall surfaces, finished even and smooth without using extra cement complete all as specified and directed by the Engineer-in-Charge. |
| 19 | Supply, fixing, testing and commissioning in replacement of 150mm dia heavy duty class "C" MS pipe, 6mm thick ISI marked as per IS:1239 with all necessary fittings & fabrication like tees, elbow, flanges, reducer, gaskets, nut and bolts etc welding or screwed joint as required including fixing of pipe with necessary standard standard clamps structural steel supprt as required/directedat site including painting of two coats of synthetic enamel paint of post office red color over two coats of red oxide primer complete all as specified and as directed by the Engineer-in-Charge. |
| 20 | All as per item No. 20.00 above, but size of pipe 100mm. |
| 21 | All as per item No. 20.00 above, but size of pipe 80mm. |
| 22 | S&F in repair 150 mm bore CI sluice valve of Class PN-1.6, long body type, heavy duty, ISI marked (IS-780 & 5312) flanged end with iron wheel and brass spindle including rubber gasket joints, nuts, bolts etc including testing complete all as specified and as directed by the Engineer-in-Charge. |
| 23 | M&L for complete removal of old painted surfaces offire fighting MSpipes and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer (using spray gun) including preparation of surfaces for any description/type with arrow mark of pipes (with other coloras directed by engr-in-charge)complete all as specified and as directed for the following size of pipes :- |
| 24 | 80 to 100 mm bore pipes |
| 25 | 150 to 200 mm bore pipes |
| 26 | S&F Gun metal gate valve as per IS : 778-84Class-1 Pressure tested 2.4 Mpawith iron wheel head, screwed both ends for iron pipes or for unions as in repairs, complete as all specified and as directed for the following size of pipes :- |
| 27 | 80 mm bore |
| 28 | 50 mm bore |
| 29 | 40 mm bore |
| 30 | S&F in repair 63 mm bore, 15 metre long fire hose, RRL (Reinforced Rubberised Lined), type "1" marked (Conforming to IS-636) with aluminium metal coupling, complete all as specified and as directed by the Engineer-in-Charge. |
| 31 | Re-filling of CO-2 gas to existing cylinders any size and capacity (ranging from2 Kg to 45 Kgs) including necessary hydro testingComplete with certificate of thecompany complete all as specified and as directed by the Engineer-in-Charge. |
| 32 | S&F in repairs SS hydrant valve for fire fighting equipment 63 mm bore complete all as specified and as directed by the Engineer-in-Charge. |
| 33 | M&L for complete removal of old painted surfaces of mild steel hose box of size 800 mm x 600 mm x 250 mm, double door (any description) and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer (fire red outside and brilliant white inside yard)including preparation of surfaces for any description/type complete all as specified and as directed by the Engineer-in-Charge. |
| 34 | M&L for testing of Wet riser/Down comer systemincluding pipe lines of high rise bldgs [JCOs/ORs/JSA/Signal Regt/Old Cmd bldg (P-1)] complete with all connected panel and valves onYearlybasis incl minor repair of Panel, gauge and other equipment all major items mentioned in above schedule will be measured and paidseperately all as specified and directed by Engr-in-Charge. (Note: Testing of fire fire fighting system shall be carried out through reputed agency having minimum 05 Yrs experience in fire fighting works. Necessay supporting documents shall be submitted by bidder for approval of Accepting Officer before commencement of work. All major items mentioned inabove schedule will be meaured and paid separetely). |
| 35 | M&L for Complete Checking andtesting of Wet Riser System, Sprinkler pipe line Systemof high rise bldgs (NEW OTM CMD BLDG) with all connected fire fighting Pump, electric motor Panels, MCCB, Pressure Switch, Air Vessel, Timer and all valves of any type around the Bldg and Pump house as well as in Bldgs onyearlybasis incl minor repair of the equipment, all major items mentioned in above schedule will be measured and paidseperately all as specified and directed by Engr-in-Charge. (Note: Testing of fire fire fighting system shall be carried out through reputed agency having minimum 05 Yrs experience in fire fighting works. Necessay supporting documents shall be submitted by bidder for approval of Accepting officer before commencement of work. All major items mentioned inabove schedule will be meaured and paid separetely). |
| 36 | Repair/Maint of fire fighting conventional FIRE ALARM SYSTEM including rectification, fault identification of complete firedetectionsystem installed at JSA BLOCK-1 AND BLOCK-2including minor repair, yearlytesting one timeand cleaningof all detector after each testing and replacing the defective parts involved for smooth operation/function of F/Fighting systemincluding cleaning, adjustment, minor repairs ofsmoke detector, heat detector, Manual call Point and also Checking of fire fighting wiring&FDA Panel etccomplete all as specified and directed by Engr-in-Charge. The details of Fire equipments required repairs/maintenance are as under :- (a) Conventional Fire Alarm Panel with 24 zone (total 24 zones )- 02 nos (b) Conventional Smoke detector and Heat detectorwith base - 950 nos contd...... |
| 37 | NOTES TO ITEM NO. 32.00 :- (i) Checking & Repairing if required all the equipments of fire detection system such as smoke detector, heat detector, manuall call point, fire fighting wiring etc (ii) Operational test of all the equipment of Fire detection system of rep of users and Engr-in-Charge. (iii)The Contractor will submit test report regarding functioning of all the equipments duly signed by contractor, users rep and Engr-in-charge. (iv) Maintenance shall be carried out through the OEM or his authorised technician. Supporting documents in this regard shall be submitted for approval of Accepting Officer prior to commencement of work. (v) Emergency visit will be carried out when called in addition to the breakdown call in case of anyfailure in the system, without any additional cost. (vi) Materials required for replacement will be measured and paid seperately under respective items of this schedule. |
| 38 | S&F in repair PowerSupply Card for Conventionalfire alarm control panel upto 24 zones, complete all as specified and as directed by the Engineer-in-Charge. |
| 39 | S&F in repair Alarm ACK/Reset Card for Conventionalfire alarm control panel upto 24 zones, complete all as specified and as directed by the Engineer-in-Charge. |
| 40 | S&F in repair gun metalfemale adaptor outlet 63mm dia, suitable for fire hydrant, complete all as specified and as directed by the Engineer-in-Charge. |
| 41 | S&F in repair gun metal male adaptor outlet 63mm dia, suitable for fire hydrant, complete all as specified and as directed by the Engineer-in-Charge. |
| 42 | S&F 200 mm bore CI Butterfly valve, lever operated typeheavy duty, ISI marked (BS-5155),including rubber gasket joints, nuts, bolts etc including testing as in repair complete all as specified and as directed. |
| 43 | Disconnecting all electric / water supply connection from the monoblock / cenrtifugal pump set of any make, electric driven AC 3 phase, 415 Volts,transporting to workshop, dismantling, removing the burnt out windings, cleaning the starter slots and rewinding with super enamelled copper wire of suitable gauge, insulating, proper heat varnishing, re-transportation and re-installation at same position inclcommissioning and testing complete for the following capacity :- |
| 44 | Motor of capacity 2HP/3HP Make : Crompton Greaves, Model No -632/1117-CF |
| 45 | Motor of capacity 5 HP Make : Kirloskar, Model No 632/1127.CF |
| 46 | Motor of capacity 7.5 HP Make : Kirloskar, Model No IAA15/01-65 |
| 47 | Motor of capacity 10 HP Make : Kirloskar, Model No ADC4200716 |
| 48 | Motor of capacity 12.5 to 15 HP Make : Kirloskar, Model No 05F5100038, 05F5100035 |
| 49 | Motor of capacity 20HP/25 HP Make : Kirloskar, Model No KDS2050&2560, A-Z-C7100182 |
| 50 | Motor of capacity 30 HP Make : Kirloskar, Model No KDS3068 |
| 51 | S&F Ball bearing for AC 3 phase 415 Volts induction motor / monoblock pump set of the following capacities, in replacement as directed by the Engineer-in-Charge :- |
| 52 | Motor / Pump setof capacity 2HP/3HP (Make-SKF 6305 - RS1 or equivalent model in other makes specified in tender) |
| 53 | Motor / Pump setof capacity 5 HP (Make-SKF 6306 - 2RS1/C3 or equivalent model in other makes specified in tender) |
| 54 | Motor / Pump setof capacity 7.5 HP. (Make-SKF 6306 - 2Z, 6306-2Z/C3 or equivalent model in other makes specified in tender) |
| 55 | Motor / Pump setof capacity 10 HP. (Make-SKF 6307 - 2RS1 or equivalent model in other makes specified in tender) |
| 56 | Motor / Pump setof capacity 15 HP. (Make-SKF 6308 - 2 RZNR/C3 or equivalent model in other makes specified in tender) |
| 57 | Motor / Pump setof capacity 20 HP/25HP (Make-SKF 6309 - 2RS1 or equivalent model in other makes specified in tender) |
| 58 | Motor / Pump setof capacity 30 HP (Make-SKF 6309 - 2RS1 or equivalent model in other makes specified in tender) |
| 59 | Dismantling and taking out of the following capacity pump sets of any type (monoblock/centrifugal) complete of any make from any installation , transporting to workshop and re-installation in same position after replacement of worn out spare parts and painting with one coat of synthetic enamel paint to pump only incl commissioning & testing on completion all as directed by the Engr-in-Charge. (Note : Spares parts will be measured & paid separately under relevent item) |
| 60 | Motor / Pump set Capacity of 2 to 3 HP |
| 61 | Motor / Pump setCapacity 5 HP |
| 62 | Motor / Pump set Capacity of 7.5 HP |
| 63 | Motor / Pump set Capacity of 10 HP |
| 64 | Motor / Pump set Capacity of 15 HP |
| 65 | Motor / Pump set Capacity 20HP/25 HP |
| 66 | Motor / Pump set Capacity 30HP |
| 67 | Disconnecting of all electric connection, taking out 3 phase, 415 Volts induction electric motor from any installation of any make (other than, as catered under Item No. 1 & 2 here-in-before), transporting to workshop, dismantling, overhauling with proper heat varnishing, (for proper insulation), re-metalling, machine polishing of rotor shaft, terminal box and applying one coat synthetic enanel paint, transporting back to work site for reinstallation of the same including testing complete for the following capacities :- |
| 68 | Motor of capacity 2 HP/3HP |
| 69 | Motor of capacity 5 HP |
| 70 | Motor of capacity 7.5 HP. |
| 71 | Motorof capacity 10 HP. |
| 72 | Motorof capacity 15 HP |
| 73 | Motor of capacity 20HP/25 HP |
| 74 | Motor of capacity 30 HP |
| 75 | Taking out exisiting open well submersible pumping sets,of capacity 7.5 HP, 03 phase dismantling the pump sets from motor and removing all burnt/worn out coils cleaning the slots and rewinding with super enamelled copper wire of existing size including varnishing two coats, drying and reassembling the electric motorre-transporting, re-installation and testing complete all as specified and as directed by Engr in Charge. Make of Pump : Kirloskar, Model No-KOS 830+ |
| 76 | All as per Item No. 43.00 here-in-before but of capacity 10 HP & three phase. Make of Pump: Kirloskar, Model No-M-KOS 1030+ |
| 77 | S&F stainless steel filter net suitable for 7.5 HP/10 HP submersible pump as in repair, complete all as specified and as directed by Engr in Charge. |
| 78 | Supply only cast iron impeller, suitable for 5 HPcapacity monoblock pumpas directed by the Engineer-in-Charge. (Make of Pump - Kirloskar) |
| 79 | All as item serial No 46.00 above, but suitable for 7.5 HP |
| 80 | All as item serial No 46.00 above, but suitable for 10HP |
| 81 | All as item serial No 46.00 above, but suitable upto 15-20HP |
| 82 | All as item serial No 46.00 above, but suitable for 25HP |
| 83 | All as item serial No 46.00 above, but suitable for 30HP |
| 84 | M&LRe-metalling, grinding and repolishing of damaged CI impeller of pump capacity 5 HP to 20 HPcomplete as directed by Eng-in-charge. |
| 85 | M&LRe-metalling, grinding and repolishing of damaged CI impeller of pump capacity 20 HP to 30 HPcomplete as directed by Eng-in-charge. |
| 86 | S&F Gun metal gland bush including graphite gland packing for induction / monoblock pump set of capacity 5 HP to 30 HP, as in replacement complete all as specified and as directed. |
| 87 | S&FMS studs with nut as per exsiting size & shape of size 1/4" to 5/8" as directed as in repair complete all as specified and as directed. |
| 88 | S&F Impeller key suitable for anytype of pump , as in repair complete all as specified and as directed. |
| 89 | S&F Check nut(suitable for anytype of pump), as in repair complete all as specified and as directed. |
| 90 | Cutting and removing of old unserviceable nut bolt and washer of size 3/8" to 5/8" from the pump set and base frame and S&F MS nut bolt and washer of same size fixed in same position, complete as directed by the Engineer-in-Charge. |
| 91 | Re-metalling and re-shaping of impeller key slot, for pumps complete as directed by the Engineer-in-Charge. |
| 92 | Removing the existing foot valve/check valve of any type carefully by disconnecting water supply pipes of size 40mm to 80mm dia and opening, cleaning including replacement of new gasket (Flap) bolt, nut, washers of suitable size andrefixing the same after repairs complete as directed by the Engineer-in-Charge. |
| 93 | All as per item Ser No. 61.00 here in before, but of pipe size 100 mm to 200 mm. |
| 94 | M&L Checking and balancing of old shaft for monoblock / centrifugal pump of any capacity / type including re-metalling and polishing, and re fixing complete as directed by the Engineer-in-Charge. |
| 95 | M&L Framed Work such as brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles as necessary, gusset plates, riveting, etc. conforming to Fe-290, Gde-E-165, complete all as speci-fied and as directed. |
| 96 | M&L Plain Cement Concrete type B1 (1:2:4) using 20 mm stone aggregate as in Foundation of monoblock pump/centrifugal pump, Filling and Mass Concrete, surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 97 | S&FSS Sleeve for any type of monoblock andcentrifugal pump of capacity 5 to 40HP,as in repairs,complete all as specified and as directed. |
| 98 | All as per item No. 66 above, butfor 20 to 30 HP centrifugal pump set. |
| 99 | M&L Greasing for bearing (of centrifugal pumps / Monoblock pumps) of 5 to 15 HP pump sets any make complete all as directed by Engr-in-Charge. |
| 100 | M&LGreasing for bearing (of centrifugal pumps / Monoblock pumps) of 20 to 40 HP pump sets complete all as directed by Engr-in-Charge. |
| 101 | S&FMS star/round coupling with star rubber bush / Rubber round coupling with MS plate incl necessary nut, bolt & washers complete of centrifugal pumps 5 HP to 15 HP capacitycomplete all as specified and as directed. |
| 102 | All as per item No. 70 above, but of pump capacity 20 to 30 HP. |
| 103 | S&F Motor cooling fan suitable for 5 HP to 15 HP induction motor as in repaircomplete all as specified and as directed. |
| 104 | All as per item No. 72.00 above, but for 20 to 30 HP induction motor. |
| 105 | M&LRewinding of submersible motor of capacity 22.5HP to 25 HP of any make and any type with super enamelled copper wire of suitable gauge, insulated andincluding re-assembling the motor, jointing with insulated materials etc,. including testing complete all as directed by Engr-in-Charge. Make : CALAMA, KSB & Crompton Greaves |
| 106 | S&FPVC insulated flat industrial copper cable, of cross-sectional area 10 sq mm x 3 core, suitable for submersible pump, including necessary incoming andoutgoing electric connections, copper lugs, water proofing compound etc., connected to starter / motor as in repair complete all as specified and as directed. |
| 107 | Disconnecting of all electric / water supply connection from the panel/water line, taking out submersible pump set including column pipe (motor and pump) of 22.5 HP to 25 HP capacity by using tripod & chain pullyfrom site and transporting to workshop,dismantling the pump part by part, after stripping off the pump and motor,segregating the unserviceable and serviceable parts, cleaning, slot cutting,re-metalling and machine polishing of outer cover, threading of all parts as required, re-assembling including replacement of worn out spares and painting with one coat of synthetic enamel paint,re-transportingto work-site lowering the pump set including column pipe and re-connection of electrical and mechanical joint,testing of pump set at Queen"s Barrack, Royal Barrack, AOI, Training Area, complete all as directed by Engr- in- Charge. Note : Column pipe, New spares, nuts, bolts, gasket & painting of column pipes shallbe measured and paid separately |
| 108 | Supply only following spare parts for replacing unserviceable parts against Item No. 76 here-in-before:- |
| 109 | Cable guard |
| 110 | Suction case strainer |
| 111 | Counter thrust bearing |
| 112 | Diffuser ring |
| 113 | Bearing sleeve |
| 114 | Bearing bush upper / lower |
| 115 | Suction case (Intermediate) |
| 116 | Neck ring (Intermediate seal ring) |
| 117 | SS Pump shaft |
| 118 | Shaft sealing bush |
| 119 | Impeller (Gun metal) |
| 120 | Gun metal impeller |
| 121 | Key of impeller |
| 122 | Sand guard |
| 123 | Seal cap |
| 124 | Coupling for pump |
| 125 | Stage casing (Bowl) |
| 126 | Adjusting cap |
| 127 | Rubber cap |
| 128 | Sleeve for shaft |
| 129 | Seal for shaft |
| 130 | Ring insert for non-return valve |
| 131 | Oil seal |
| 132 | Diaphragm |
| 133 | Circlip |
| 134 | Coupling sleeve |
| 135 | Upper bearing bush |
| 136 | Lower bearing bush |
| 137 | Thrust bearing plate |
| 138 | Counter thrust segments |
| 139 | Drain plug |
| 140 | Sealing ring |
| 141 | Stud ring upper / lower |
| 142 | Thrust carbon |
| 143 | Rotor sleeve |
| 144 | Motor base |
| 145 | Pressure compensation rubber |
| 146 | Gunmetal bearing bush |
| 147 | Stainless steel stud |
| 148 | Rotor re-metalling, grinding & polishing complete |
| 149 | SS nut of size 8 mm / 12 mm |
| 150 | Nylon washer |
| 151 | Bearing bush (rubber) |
| 152 | Flange upper / lower |
| 153 | Lock nut |
| 154 | Supply onlyMS column pipe 100mm bore grade (heavy duty) flanged type complete with nuts, bolts, rubber including groove for cable entry system with gasket etc of 10 ft length, complete all as specified and as directed. (Make : Jindal / TATA / Maharastra Seamless) |
| 155 | All as per item No 78.00above,but of size 150 mm bore |
| 156 | S&F MS Nipple 150 mm borewith heavy flange with suitable holes and reducer complete duly welded and threaded as required in repair, complete all as directed by Engineer-in-Charge. |
| 157 | All as per item No. 80.00 above, but for pipe of size 80 to 100 mm |
| 158 | Taking down Non return valve assembly size 100mm to 150mm by opening the nut, bolts and washers, cleaning the valve replace with new rubber gasket, balls and refix the same after completion, complete all as directed by Engineer-in-Charge. |
| 159 | S&F Mild steel bore well cap for 8" x 12" tube well in two parts 10mm thick with cable/column pipe entry system and locking arrangements as in repaircomplete all as specified and as directed. |
| 160 | S&F MS nut and bolt with MS washer of any size for jointing of MS column pipes / pump mounting bolts / valves etc. as in repair , complete all as specified and as directed. |
| 161 | S&F Rubber gasket 3mm thick for jointing of column pipe of 100 to 150 mm bore as in repair , complete all as specified and as directed. |
| 162 | M&LCleaning of oldpainted surfaces of 150 mm bore column pipe with iron brushes and applying one coat of black bituminous paint (suitable for drinking) on the surface of column pipe (inside and outside) of length 10" Ft, complete all as specified and as directed. |
| 163 | All as per item No. 86.00 above, but of pipe size 100 mm bore |
| 164 | Welding work in exc 6mm but n. exc 9mmrunning pipe line / MS frame in any length and thickness not exceeding 9 mm in any position complete all as directed by Engr-in-Charge. |
| 165 | S&FThree pole power contactor of type ML-3, suitable for 415 Volts, including necessary incoming and outgoing elect connections, copper lugs, etc., as in repair complete all as specified and as directed. (Make :L&T, Cat No: SS 90721 or equivalent model in other makes specified in tender) |
| 166 | S&FThree pole power contactor of type ML-2, suitable for 415 Volts, including necessary incoming and outgoing elect connections, copper lugs, etc., as in repair complete all as specified and as directed. (Make : L&T, Cat No: SS 90701 or equivalent model in other makes specified in tender) |
| 167 | S&FThree pole power contactor of type ML-1.5, suitable for 415 Volts, including necessary incoming and outgoing elect connections, copper lugs, etc., as in repair complete all as specified and as directed. (Make : L&T, Cat No: SS 91851 or equivalent model in other makes specified in tender) |
| 168 | S&FFully automatic star delta starter in Sheet-Steel Enclosure Type ML 3 FASD (Motor Rating AC-3 Duty, 415V, 50Hz, 3Ph) incl necessary incoming & outgoing elect connections, copper lugs, etc., as directed. (Make : L&T, Cat No SS90730 / BCH, Cat No: NASANLEN or equivalent model in other makes specified in tender) |
| 169 | All as per item No 92.00 above, but type ML 2 FASD (Motor Rating AC-3 Duty, 415V, 50Hz, 3Ph. (Make : L&T, Cat No SS90705 / BCH, Cat No: NASAMLEN or equivalent model in other makes specified in tender) |
| 170 | S&FDOL starter in sheet steel enclosure MN-16 for motor rating of 9 to 15 Amps including all necessary electric connections and fixing arrangement as per site requirement all as directed by Engr-in-charge. (Make :- L&T, Cat No: SS 94351 /BCH, Cat No: SAWPLZ or equivalent model in other makes specified in tender) |
| 171 | S&FSingle Phase Preventor Relay - Sz5 380V AC (6 wires)including necessary electric connections as in repair complete all as specified and as directed. (Make : L&T Cat No: CS94824LOOO or equivalent model in other makes specified in tender) |
| 172 | S&FHRC bolted type fuse with holder 63 Amps capacity, including necessary incoming and outgoing elect connections, copper lugs, etc., as in repair complete all as specified and as directed. (Make : L&T, Cat No: ST35828 & ST30761 or equivalent model in other makes specified in tender) |
| 173 | S&F Push button Actuator switchof any colour including necssary connections complete all as specified and as directed. (Make: L & T, Cat No: SS91519 or equivalent model in other makes specified in tender) |
| 174 | S&F Indication lamp set (RYB), LED typeas in repair complete all as specified and as directed. |
| 175 | S&F in Repairs selector actuator - 03 position complete all as specified nd as directed by Engr-in-Charge. |
| 176 | S&FML bi-metal overload relays, ranging from 10 Amp to 16 Amp, including necessary incoming and outgoing elect connections, copper lugs, etc., as in repair complete all as specified and as directed. (Make : L&T, Cat No: SS 91858 OO BO / BCH, Cat No: MC305ANA3L or equivalent model in other makes specified in tender) |
| 177 | S&F Single phase preventor relay with timer- SDz5, SPPR + Timer, 415V including necessary electric connections as in repair complete all as specified and as directed. (Make : L&T, Cat No: XM81809OOOO or equivalent model in other makes specified in tender) |
| 178 | S&FML bi-metal overload relays, ranging from 10 Amp to 16 Amp, including necessary incoming and outgoing elect connections, copper lugs, etc., as in repair complete all as specified and as directed. (Make : L&T, Cat No: SS 9185800BO / BCH, Cat No: MC305ANA3L or equivalent model in other makes specified in tender) |
| 179 | S&F AC electronic timer, type ST 100, 3 phase electronic timer ranging from 3 - 30 sec including necessary incoming and outgoing elect connections, copper lugs, etc., as in repair complete all as specified and as directed. (Make : L&T, Cat No: ST80328OOOP or equivalent model in other makes specified in tender) |
| 180 | S&FPVC insulated single core solid copper conductor of cross sectional area 25 sq mm for inter-connection as in repair complete all as directed by the Engr-in-Charge. |
| 181 | All as per item No 108.00 above, but of cable size 16 Sqmm. |
| 182 | All as per item No. 108.00 above,but of cable size 10 Sqmm. |
| 183 | All as per item No. 108.00 above, but of cable size 6 Sqmm. |
| 184 | All as per item No 108.00 above, but of cable size 2.5 Sqmm. |
| 185 | S&F Add on block 2NO + 2NC includingnecessary electric connections as in repair complete all as directed by the Engr-in-Charge. (Make : L&T, Cat No: CS94114 or equivalent or equivalent model in other makes specified in tender) |
| 186 | S&F Add on block 1NO + 1NC includingnecessary electricconnections as in repair complete all as directed by the Engr-in-Charge. (Make : L&T, Cat No: CS94118 / BCH, Cat No: C320KGT*11 or equivalent model in other makes specified in tender) |
| 187 | S&F Single phase preventor (auto re-set, 40 Volts unbalance), as in repair complete all as directed by the Engr-in-Charge. (Make : Minilec, Cat No: VSP 2 or equivalent model in other makes specified in tender) |
| 188 | M&L Stripping off existing starter panel and replace of single phase preventor matching with motor of type VSP-3 and re-assembling of the panel including rectification of fault and safety device,adjustment of time etc complete as directed by the Engr-in-Charge. (Make : Minilec, Cat No: VSP 3 or equivalent model in other makes specified in tender) |
| 189 | S&FMCCB 3 pole 25 KA breaking capacity 100 A with thermal magnetic release as in repair complete all as directed by the Engr-in-Charge. (Make: L&T, Cat No: CM91612OOKOOG / LEGRAND, Cat No: 4200 45 / HAGER, Cat No: HHS100DR / ABB, Cat No: 1SDA067397R1 / SCHNEIDER, Cat No: LV426257) |
| 190 | S&FMCCB 3 pole 25 KA breaking capacity 63 A with thermal magnetic release as in repair complete all as directed by the Engr-in-Charge. (Make : L&T, Cat No: CM91612OOHOOG/ LEGRAND, Cat No: 4200 43 / HAGER, Cat No: HHS063DR / ABB, Cat No: 1SDA067395R1 / SCHNEIDER, Cat No: LV426255 ) |
| 191 | S&FMCCB 3 pole 25 KA breaking capacity 200 A with thermal magnetic release as in repair complete all as directed by the Engr-in-Charge. (Make: L&T, Cat No: CM90638OONO/ LEGRAND, Cat No: 4202 08 / HAGER, Cat No: HHT20DR / SCHNEIDER, Cat No: LV431111) |
| 192 | S&F Three pole power contactorMNX-12 suitable for 415V, 50Hz as in repair all as directed. (Make : L&T, Cat No- CS 94109 or equivalent model in other makes specified in tender) |
| 193 | S&F Threepole power contactorMNX-25 suitable for 415V, 50Hz as in repair complete all specified and as directed. (Make : L&T, Cat No- CS 94110 or equivalent model in other makes specified in tender) |
| 194 | S&F Threepole power contactorMNX-32 suitable for 415V, 50Hz as in repair complete all specified and as directed. (Make : L&T, Cat No- CS 94111 or equivalent model in other makes specified in tender) |
| 195 | S&F Threepole power contactorMNX-50 suitable for 415V, 50Hz as in repair complete all specified and as directed. (Make : L&T, Cat No- CS 97075 or equivalent model in other makes specified in tender) |
| 196 | S&F MCB, "C" curve 6-32 A, 10 KA as in repair complete all specified and as directed. |
| 197 | S&F SPN MCB "C" curve 40 A, 10 KA as in repair complete all specified and as directed. |
| 198 | S&F in repairs MS pump set base frame suitable for 5 to 7.5 HP pump set incl necessary dismantling of old PCC and provision of new PCC 1:2:6 foundation, MS foundation bolt, nut & washers complete all as directed. |
| 199 | S&F in repairs MS pump set base frame suitable for 10 to 20 HP pump set incl necessary dismantling of old PCC and provision of new PCC 1:2:6 foundation, MS foundation bolt, nut & washers complete all as directed. |
| 200 | M&L for complete removal of existing paint from electrically operated centrifugal pump sets, cleaning of name plates and applying two coats of automative paint of approved shade duly spray painted, over a coat of red oxide primer complete all as specified and directed in respect of the following capacities :- |
| 201 | 5 HP capacity |
| 202 | 7.5 /10 HP capacity |
| 203 | 15 HP capacity |
| 204 | 20 - 30 HP capacity |
| 205 | Taking out unserviceable LT panel board (of any size) and Supply, install, commissioning and testing of indoor type LT Starter Panel Board, cubical type, dust and vermin proof, made out of 2.0 mm thick CRCA sheet of minimum size 1200 mm x 1000 mm x 400 mm, fabricated in CPRI approved factory with front and back openable door (with locking arrangement) and making compartment for each MCCB/Change over switch separately, cabinet and all members chemically treated with MSR solution for anticorrosive treatment and powder coated (shade RAL-7032) and inclusive offour numbers copper bus bar of 200 Amps capacity (of adequate length), for three phase and neutral system, fixed over and including 4 nos insulators, pre-wired with PVC insulated stranded copper conductor (of adequate size), all incoming / outgoing connection to be made with copper lugs and copper strips, with provision of cable entry and exit at mid portion of the panel board (with cable gland) and two numbers Danger Notice Plate (of size 20 cm x15 cm, suitable for LT line, made out of 0.6 mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour, fixed with MS angle frame of size 40X40X6mm with legs not more than 60cm including grouting with PCC 1:2:4 type B1 complete all as specified and directed including supply and fixing of the following accessories:- |
| 206 | INCOMING :- (a)MCCB, 125 Amps, 4 pole, 25 KA, with thermal magnetic release, Ics=100% of Icu, 440 Volts AC - 01 No. (Make: LEGRAND/ L&T / HAGER / SCHNEIDER/C&S / ABB) (b)Digital Volt meter of range 0 to 500 Volts with selector switch - 01 No (c) Digital Ammeter of range 0 to 200 Amps with selector switch and suitable CTs - 01 No (d) LED indicating Lamp with holder for main supply & standby supply indicating RYB (Set of three) - 01 Set |
| 207 | OUTGOING :- (a) MCB TPN 63 Amps, 3 pole, 10 KA, adjustable type- 03 Nos. (Make: LEGRAND / L&T / HAGER/ C&S / ABB) (b) Fully Automatic Star Delta Starter, capacity 10 HP, with motor protection relay suitable for protection against overload, singe phasing, reverse running, abnormality in supply, unbaanced current etc - 03 Nos (Make: L&T, / BCH / C&S) (c)Digital Volt meter of range 0 to 500 Volts with selector switch - 01 No (d) Digital Ammeter of range 0 to 200 Amps with selector switch and suitable CTs - 03 Nos (e) Single Phase preventer- 03 Nos (f) MCB, 10 kA, SP, 06-32 Amps, "C" Curve - 03 No |
| 208 | Note:-(i)All incoming and out going cables, duly thimble along with suitable size of brass cable glands, to be connected to accessories. (ii) All ACB, MCCB & Changeover to be connected internally with suitable size of copper strip. |
| 209 | Taking out unserviceable LT Firefighting starter panel board (of any size) and Supply, install, commissioning and testing of indoor type LT Firefighting Starter Panel Board, cubical type, dust and vermin proof, made out of 2.0 mm thick CRCA sheet of minimum size 1800 mm x 1500 mm x 500 mm, fabricated in CPRI approved factory with front and back openable door (with locking arrangement) and making compartment for each MCCB/Change over switch separately, cabinet and all members chemically treated with MSR solution for anticorrosive treatment and powder coated (shade RAL-7032) and inclusive offour numbers copper bus bar of 200 Amps capacity (of adequate length), for three phase and neutral system, fixed over and including 4 nos insulators, pre-wired with PVC insulated stranded copper conductor (of adequate size), all incoming / outgoing connection to be made with copper lugs and copper strips, with provision of cable entry and exit at mid portion of the panel board (with cable gland) and two numbers Danger Notice Plate (of size 20 cm x15 cm, suitable for LT line, made out of 0.6 mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour, fixed with MS angle frame of size 40X40X6mm with legs not more than 60cm including grouting with PCC 1:2:4 type B1 complete all as specified and directed including supply and fixing of the following accessories:- |
| 210 | INCOMING :- (a)MCCB 250 Amps, 4 pole, 25 KA, with thermal magnetic release, Ics=100% of Icu, 440 Volts AC - 01 No. (Make: LEGRAND/ L&T / HAGER / SCHNEIDER/C&S / ABB) (b)Digital Volt meter of range 0 to 500 Volts with selector switch - 01 No (c) Digital Ammeter of range 0 to 200 Amps with selector switch and suitable CTs - 01 No (d) LED indicating Lamp with holder for main supply & standby supply indicating RYB (Set of three) - 01 Set |
| 211 | OUTGOING :- (a) MCCB 160 Amps, 3 pole, 25 KA, adjustable type- 01 No. (Make: LEGRAND / L&T / HAGER/ C&S / ABB) (b) MCCB 100 Amps, 3 pole, 25 KA, adjustable type- 01 No. (Make: LEGRAND / L&T / HAGER/ C&S / ABB)((c) MCCB 63 Amps, 3 pole, 25 KA, adjustable type- 01 No. (Make: LEGRAND / L&T / HAGER/ C&S / ABB)(d) Star Delta Starter, capacity 50 HP, with motor protection relay suitable for protection against overload, singe phasing, reverse running, abnormality in supply, unbaanced current etc - 01 No (Make: L&T, / BCH / C&S) (e) Star Delta Starter, capacity 30 HP, with motor protection relay suitable for protection against overload, singe phasing, reverse running, abnormality in supply, unbaanced current etc - 01 No (Make: L&T, / BCH / C&S) (f) Star Delta Starter, capacity 15 HP, with motor protection relay suitable for protection against overload, singe phasing, reverse running, abnormality in supply, unbaanced current etc - 01 No (Make: L&T, / BCH / C&S)(g) 130 KVA DG AMF Panel Board-01 Set (h)Digital Volt meter of range 0 to 500 Volts with selector switch - 01 No (j) Digital Ammeter of range 0 to 200 Amps with selector switch and suitable CTs - 03 Nos (k) Hooter 220 Volts- 01 No (l) MCB, 10 kA, SP, 06-32 Amps, "C" Curve - 03 No |
| 212 | Note:-(i)All incoming and out going cables, duly thimble along with suitable size of brass cable glands, to be connected to accessories. (ii) All ACB, MCCB & Changeover to be connected internally with suitable size of copper strip. |
| 213 | M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanized iron strip 32 X 6 mm(upto 7.5 metres) by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 45 cm x 45 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 40 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing and dismantling of existing unsv earthing complete all as shown in Figure 15A of IS 3043 :1987, complete all as specified and directed. |
| 214 | S&F in repair aluminium strip 25 mm X 3 mm with saddles, porcelain/FRP insulators @ 1 metre c/cand fixing screws etc, for roof conductors and down conductors above ground complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
