New Okhla Industrial Development Authority-NOIDA has published Tender For Development Of Village (Repair Of Flooring, Roof, Toilet And Boundary Wall In Primary School In Barola) Noida. Submission Date for this Tender is 13-12-2022. Shed Construction Tenders in noida Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick. |
| 2 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR 18/I.No. 8.31 |
| 3 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to thedumping ground within 50 metres lead. DSR 2018/I.No. 15.56/P-253 |
| 4 | Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in- charge (payment for providing grooves shall be made separately).(DSR-2018\I.No.13.72/P-228 |
| 5 | Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge :13.73.1 15 mm wide and 15 mm deep groove (DSR-2018\I.No.13.7.3.1P-228 |
| 6 | Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade I (fibre base self finished bitumen felt) six and final courses of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per sqm including preparation of surface, excluding grading, compete.DSR-18/I.No. 22.10 |
| 7 | Providing & Laying in position cement concrete of specefied grade excluding the cost of centring and shuttering - All work upto plinth level -1:2:4 (1cement : 2 C-sand : 4 graded stone agg. 20MM N.S.) (DSR 16 I.No. 4.1.3 P-85) |
| 8 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using coarse aggregate as well as fine aggregate drived from natural sources and cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering,shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. "Excess/ less cement used as per design mix is payable/recoverable separately ) All work up to Plinth level. DSR-2018/I. no. 5.33.1 |
| 9 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.DSR-2018/ I.No: 10.25.2 |
| 10 | M- 150 Brick Work In 1:6 cement & fine sand 1.25 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper compietion of thework. SOR I.NO.6.02/ 303 |
| 11 | 12mm cement plater of mix 1:6(1cement : 6 C-sand) (DSR 18 I.No. 13.4.2 |
| 12 | Neat cement punning. |
| 13 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS 15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc.complete. DSR/I. no. 11.38 |
| 14 | Providing gola 75x75mm in cement concrete 1:2:4(1cement:2 C. sand:4 graded stone agg. 10mm and down gauge) including finishing with cement mortar 1:3(1cement:3 fine sand) as per standard design. In 75x75mm deep chase. DSR/I. no. 12.21.1 |
| 15 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement :3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. DSR/I. no. 12.22 |
| 16 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend. DSR/I. no. 12.42.5.2 |
| 17 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion: 110 mm Shoe. DSR 18/I.No. 12.42.6.2 |
| 18 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm (DSR-18/I-12.43.2). |
| 19 | Painting with synthetic enamel paint of approved brand and manufacture of required to colour to give an even shade. Two or more coat on new work. (DSR 2018 I.No. 13.61.1/P-227) |
| 20 | ProvidingandlayingAPP(AtacticPolypropylenePolymer) modified prefabricatedfivelayer3 mm thick waterproofing membrane,blackfinishedreinforcedwithnon-wovenpolyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/litre and viscocity 70- 160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc,andpreparingthesurfacecomplete.Thevitalphysicaland chemicalparametersofthemembraneshallbeasunder:Joint strengthinlongitudinal andtransverse directionat23°Cas 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/ 250N. Softening point of membranenot less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM,D-5147.Thelayingofmembrane shallbegotdone through the authorised applicator of the manufacturer of membrane : 3 mm thick. DSR/I. no. 14.91.1 |
| 21 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. DSR/I. no. 17.78 |
| 22 | ProvidingandfixingwashbasinwithC.I.brackets,15mmC.P. brasspillartaps,32mmC.P.brasswasteofstandardpattern, includingpaintingoffittingsandbrackets,cuttingandmaking goodthewallswhereverrequire:WhiteVitreousChinaSurgeon typewashbasinofsize660x460mmwithapairof15mmC.P. brass pillar taps with elbow including operated levers. DSR/I. no. 17.7.8 |
| 23 | ProvidingandfixingStainlessSteelAISi304(18/8)kitchensink with drain board as per IS: 13983 with C.I. brackets and stainless steelwastewithplug40mm,includingpaintingoffittingsand brackets, cutting and making good the walls wherever required : Size-510x1040mm bowl depth 250mm. DSR/I. no. 17.10.1.1 |
| 24 | ProvidingandfixingC.P.brassanglevalveforbasinmixerand geyserpointsofapprovedqualityconformingtoIS:8931: 15mm nominal bore. DSR/I. no. 18.53.1 |
| 25 | Providing and fixing C.P. brass stopcock (concealed)of standard designandofapprovedmakeconformingtoIS:8931.:15mm nominal bore. DSR/I. no. 18.52.1 |
| 26 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. DSR/I. no. 17.31 |
| 27 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter (DSR-18/I-12.41.2/P-192). |
| 28 | ProvidingandfixingChlorinatedPolyvinylChloride(CPVC)pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes DSR/I. no. 18.7.2 |
| 29 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR/I. no. 18.48 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
