Tamil Nadu Generation And Distribution Corporation Limited-TANGEDCO has published Tender For Works Contract For Erection Of Poles And Dts And Other Allied Extension Works In West Chithode Section Of Urban Erode Division. Submission Date for this Tender is 12-12-2022. Transformer Supply Tenders in erode Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavationofpolepit size of 2"x2"x6" upto 27" Pole by using JCB or manual |
| 2 | Excavation of Stay pit 4.5" to 5" by using JCB or manual |
| 3 | Excavationofpolepit size above 8 Mts PSC/RCC/RSJ Pole by using JCB or manual |
| 4 | Excavation of pit in Hard rock requires without blasting(where houses are located) |
| 5 | Erection of RCC poles/PSC Poles /metal poles upto 27"(8.0m) pole by using JCB or manual |
| 6 | Erection of RCC poles/PSC Poles/metal poles above 8 mtrspole by using JCB or manual |
| 7 | Erection of RSJ ,Rail and fabricated poles above 9.0m pole by using JCB or manual |
| 8 | Erectionof stay set complete |
| 9 | Fixingof HT "V" cross arms (all types)/Channel cross arms/Guarding Cross arms |
| 10 | Fixingof LT 3 phase cross arms |
| 11 | Fixing of LT Single phase ph X arm |
| 12 | Fixing of HT/LT TI fittings |
| 13 | Fixing of HT Pin insulator 11 KV/22 KV |
| 14 | Fixing of HT Pin insulator33 KV |
| 15 | Fixing of HT 11KV strain Disc |
| 16 | Fixing of HT 22KV strain Disc |
| 17 | Fixing of LT pin insulators |
| 18 | Fixing of LT shackle with MP |
| 19 | Fixing of Aluminium Knob |
| 20 | Earthing of pole with pin including burying ,looping and binding |
| 21 | Paving of Conductor, stringing, binding, jumpering etc., complete for lines with ACSR 7/4.09 mm |
| 22 | Paving of Conductor, stringing, binding, jumpering etc., complete for lines with ACSR 7/3.35 mm or AAAC 7/3.15 mm conductor |
| 23 | Paving of Conductor, stringing, binding, jumpering etc., complete for lines with ACSR 7/2.59 mm or AAAC 7/2.50mm conductor |
| 24 | ERECTIONofDouble Pole TRANSFORMERSTRUCTURE COMPLETEinclusive of following works -Excavation of pole pits sizing 2" X 2" X 6"(2*475), erection of poles(2*550), Excavation of Stay pits (4*390) and Erection of stay set (4*210), erection of structure materials (Top Channel-Rs.250, Bed Channel-Rs.250,Cross with stud for bed Channel-Rs.120, Belting Angle-Rs.250) erection of AB switch (Rs.1000), HG Fuse (Rs.600) Structure Earthing complete (Rs.2100), Fixing of Open Type fuse units and feeder arrangements(Rs.900), HT/LT LAS fixing(Rs.350 and Rs.250) , Provision of bus-bar arrangement(Rs.500), Jumpering(Rs.400) Fixing of support inculator angle and erection of of 3 Nos pin insulators ( Rs.200) ( all T&P suchas crowbars, siling, DShackle etc., that must be brought by the contractor)(Labour for Structure Concreting, Stay Concreting,Painting, Fixing of name board / Danger Board, Erection of transformer, Transporting of Transformer , Fixing of DT meter ,Drilling of holes, Cutting,welding,alteration of clamps if anyand Provision of Earth pit collars are separately given). |
| 25 | Erection of Double Polestructure (D.P)- inclusive of following works -Excavation of pole pits sizing 2" X 2" X 6"(2*475), erection of poles(2*550), Excavation of Stay pits (4*390) and Erection of stay set (4*210), erection of structure materials (Top Channel-Rs.250) erection of AB switch (Rs.1000),Structure Earthing complete (Rs.1500), HT LAS fixing(Rs.350 ) ,Jumpering (Rs.250) (all T&P suchas crowbars, siling, DShackle etc., that must be brought by the contractor)(Labour for Structure Concreting, Stay Concreting,Painting, Fixing of name board/Danger Board,(Drilling of holes, Cutting,welding,alteration of clamps if anyand Provision of Earth pit collars are separately given) |
| 26 | Erection of Single pole Transformer Structure-inclusive of following works -Excavation of pole pit sizing 2" X 2" X 6"(1*475), erection of poles 1*550), Excavation of Stay pits (1*390) and Erection of stay set (1*210), erection of structure materials (Tapping Channel-Rs.150, Transformer centre set arrangements-Rs.350) erection of AB switch (Rs.900), HG Fuse (Rs.400) Structure Earthing complete (Rs.2000), Fixing of Open Type fuse units and feeder arrangements(Rs.450), HT/LT LAS fixing(Rs.350 and Rs.250) ,Jumpering(Rs.300)(all T&P suchas crowbars, siling, DShackle etc., that must be brought by the contractor)(Labour for Structure Concreting, Stay Concreting,Painting, Fixing of name board/ Danger Board.Erection of transformer,transporting of transformer, LT cable arrangements, fixing of DT meter. Drilling of holes, Cutting,welding,alteration of clamps if anyand Provision of Earth pit collars are separately given) |
| 27 | Guarding arrangements with Flat guarding including fixing of 2Nos. Cross arms HT/LT |
| 28 | Transportofpoles/Materials/ conductors /DT/Metering Set andothermaterials( excludingloading andunloadingcharges.) below 8 Kms |
| 29 | Transports of poles /Materials /Conductors and other materials(excluding loading and unloading charges) for above 8 Kms for addl. Kms( Irrespective of weight in Tonage/KM |
| 30 | Loadingofmetal poles ( all sizes) |
| 31 | Unloadingofmetal poles ( all sizes) |
| 32 | Loadingofpoles up to 8 MRCC/PSC poles |
| 33 | Loadingofpoles above 8 mRCC/PSC poles |
| 34 | UnLoadingofpoles up to 8 M RCC/PSC poles |
| 35 | UnLoadingofpoles above 8 M RCC/PSC poles |
| 36 | Transporting of poles from road side to pole pit Location including loadingand unloading of polesby using JCB or Manual Up to 100 m |
| 37 | Transporting of poles from road side to pole pit including loadingand unloading of polesby using JCB or Manual above 100 m |
| 38 | Erection of street light including fixture fitting |
| 39 | Erection of street light service |
| 40 | Releasingofsingle phaseservicewire and re-fixing. |
| 41 | Releasingof3 phaseservice wire(upto 50 HP) and re-fixing. |
| 42 | Releasingof3 phaseservice wire (above 50 HP) andre-fixing. |
| 43 | Labourchargesforalterationof Back clamps tosuitfortheworks |
| 44 | Labourchargesforalterationof Stay clamps tosuitfortheworks |
| 45 | Cutting of coconut leaves /per tree |
| 46 | Cleaning of branches of treeper tree |
| 47 | Drilling of hole in channel only 3/4" & 1" per hole |
| 48 | Cutting of channel |
| 49 | Cutting of Angle |
| 50 | Cutting of pipe |
| 51 | Dismandling of pole above 8.0 mtr |
| 52 | Dismandling ofpoleup to 8.0 mtr |
| 53 | Dismandling of "V" X arm(all types),channel X arm,guarding X arm |
| 54 | Dismandling of LT 3 phase X arm |
| 55 | Dismandling of LT single phase X arm |
| 56 | Dismandling of HT/LT TI fitting |
| 57 | Dismandling of 11KV strain disc |
| 58 | Dismandling of 11 KV/22KV pin insulator |
| 59 | Dismandling of33 KV pin insulator |
| 60 | Dismandling of LT shackle |
| 61 | Dismandling of LT pin insulator |
| 62 | Dismandling of Aluminium knob |
| 63 | Dismandling of stay set |
| 64 | Dismandling of ACSR 7/3.35mm orAAAC7/3.15 conductor |
| 65 | Dismandling of ACSR 7/2.59mm or 7/2.11mm conductor |
| 66 | Dismandling of street light service |
| 67 | Feeder arrangementswith Open Type fuse Units per 1 Feeder |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
