}

Tender For Construction Of Utility And Extension Of Room In Premises Of Amc Admin Building, West Side Of Hirkani Kaksha, aurangabad-Maharashtra

Aurangabad Municipal Corporation has published Tender For Construction Of Utility And Extension Of Room In Premises Of Amc Admin Building, West Side Of Hirkani Kaksha. Submission Date for this Tender is 07-12-2022. Building Work Tenders in aurangabad Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

35045210
Tender For Construction Of Utility And Extension Of Room In Premises Of Amc Admin Building, West Side Of Hirkani Kaksha
Open Tender
Indian
Maharashtra
aurangabad
07-12-2022

Tender Details

Construction Of Utility And Extension Of Room In Premises Of Amc Admin Building, West Side Of Hirkani Kaksha

Key Value

Document Fees
INR 600 /-
EMD
INR 4080.0 /-
Tender Value
INR 4.08 Lakhs /-

BOQ Items

Name of Work: Construction of Utility and extension of Room in Premises of AMC Admin Building, west side of hirkani kaksha
Sl. No. Item Description
1Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) SSR NO.21.02
2Excavation for foundation in Hard murum includingremoving the excavated material upto a distance of 50 metres beyondthe building area and stacking and spreading as directed, dewatering, preparing the bed for the foundationandnecessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Manual means BDA 2 21.7 Bd.A.2 Page No.259 SSR No.21.07
3Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. SSR No.21.40 As directed by Engineer in charge
4Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversibleDrum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand.SSR No.24.01
5Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending,hooking the bars, binding with wires or tack welding and supporting as required complete. SSR No.26.33
6Providing and laying in situ/Ready Mixcement concreteM-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compactionand curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. SSR NO.25.11
7Providing and laying Cast in situ/Ready Mix cement concrete M 20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in column slike raft, strip foundation, grillage and footings of R.C.C. Coloums as per drg etc BDF SSR NO.25.31
8Providing and laying Cast in situ/Ready Mix cement concrete M 20 of trap / granite /quartzite/ gneiss metal for R.C.C. beamsand lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. SSR NO.25.50
9Providing and laying Cast in situ/Ready Mix cement concrete M 20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces withcementmortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concreteBatch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand.SSR NO.25.70
10Providing and laying Cast in situ/Ready Mix cement concrete M 20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings includingcentering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concreteBatch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. BDF 9 26.05 BD.F. 9 Page No.303 B7 Page No.38 SSR No.26.05
11Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, rakingout joints on exposed faces and watering etc. Complete. SSR No.27.01
12Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete SSR NO.27.05
13Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. SSR No.32.11
14Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. SSR No.32.04
15Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. BDL 32.14Spec. NO. As directed by Engineer in ChargeSSR No.32.15
16Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. BDT 39.94 As directed by Engineer in Charge SSR No.40.01
17Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm. BDT 39.56 As directed by Engineer in charge SSR No.39.56
18Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Interlocking section 40 x18 x1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineerin charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and selflocking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nutsetc,complete. With powder coating with box BDT 39.39 As directed by Engineer in chargeSSR NO.39.39
19Providing and applying one coat of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding, if necessary, cleaning and preparing surface (excluding primer coat) etc. complete. SSR NO.35.07
20Providing and fixing fiber glass reinforced polysterdoor shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete BDT 39.58 As directed by Engineer in charge SSR NO.39.58
21Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. BDM 33.67Bd. M-12 Page No.385 SSR NO.33.67
22Providing and applying one coat of seal cement primer of approved manufacture and shed including scaffolding preparing the surface by cleaning dirt andotherforeign matters, scrapping if necessary including scaffolding etc. complete. BDO 8E 35.21 As directed By Engineer in Charge SSR No.35.21
23Providing and laying ceramic tiles of having size 30 cm.x 30 cm. and confirming to corresponding I.S. for dadoand skirtingin required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. BDM 12.3325 Bd.M12 Page No.385 SSR No.33.25
24Providing and applying Two coats of wall care Putty of 2mm thickness for plastered surface and 5-6mm thickness finished concrete surface to Ceiling and Walls to prepare surface even and smooth of Brands BIRLA WHITE, BERGER, BISION, J.K., make, etc complete. a) For plastered walls/ceiling 2mm BDL 32.34 As directed By Engineer in Charge SSR No.32.34
25Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. As directed By Engineer In ChargeSSR NO.35.21
26Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 sqm /kg with two coat using Dr. Fixit or alike of chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete . As directed By Engineer In Charge SSR NO.31.09
27Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters . As directed By Engineer In Charge SSR No.42.53
28Providing and fixing 15 mm. dia Ball cock medium typewith PVC float including sockets and necessary fittings and tested as per municipal requirement etc. complete. As directed By Engineer In Charge SSR No.42.37
29Providing and laying for 150 mm dia salt glazed stoneware pipe including fittings Such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete. BDV 39.42 Bd.V-39 Page NO.573 SSR NO.42.04
30Providing and fixing 45 cm wide mild steel ladder of 40mm x 6 mm mild steel flat stringers and steps of 18 mm dia. mild steelbar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm and painting the ladder complete. (Anti Corossive Paint)As directed By Engineer In Charge SSR No.41.56
31Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc. complete . Both side polish. BDM 22 33.35 Bd. M-22 B/Page No.390 SSR NO.33.35
32Filling in plinth and floors withcontractorsmaterial/broughtfrom outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.BDA 1121.37 Bd.A.11 Page NO.263 SSR No.21.37
33Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete.As directed By Engineer In ChargeSSR No.42.30
34Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and C.I. lid cover of 75 kg with lid and frame fixed in cement concrete. BDV 4342.11 Bd.V.43 Page NO.574 SSR NO.42.11
35Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside thebuildingincluding cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. BDV 37 42.02 Bd.V.37 Page No.571. SSR No.42.02
36Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. As directed By Engineer In ChargeSSR NO.42.55
37Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete.BDP 5A 36.11 Bd.P.5 Page No.413. SSR No.36.12
38Providing and fixing white glazed earthenware sink 450mm x 200mm x 300mm including all connection of the G.I. supply and lead waste pipes up to the outside face of the wall, cold water chromium plated screw down bib tap, rolled steel or C.I. brackets, rubber plug with chain and stop tap complete. BDV 3141.75 Bd.V.31 Page No.566. SSR No.41.76
39Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. BDV 41.39 SSR No.41.40
40Providing , laying and fixing ,jointing Supreme Eco- drain 110mm SN 8 Nu- Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete. As directed By Engineer In Charge SSR No.43.30
41Providing and fixing 10 cm PVC nahani trap with grating etc. complete. BDV 542.67 BD.V.5 Page 551 and As directed By Engineer In Charge SSR No.42.67
42Providing and fixing wall hung white wash basin of size 350X450X165 mm with approved make pillar cock, C.P. Angular stop cock long thread approved make continenta including SS Bottle trap of SSR NO.48.32
43Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and ventpipe up to the outside face of wall without flushing cistern with flush cock and with water Jet and necessary fittings including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex.Engineeris necessary before use) BDV 2143.19 Specfications SSR NO.43.19
44Providing and fixing C.P.Two way BIB cock jaquar make or equivalent continental (CAT.NO. CON-041) including necessary sockets/union nut etc. complete. As directed By Engineer In Charge SSR NO.42.80
45Testing of Concrete cubes of Compressive strength etc Complete
46Royalty for natural sand etc Complete Royalty for Stone, rubble, murum Soil etc Complete
47Royalty for natural Stone Aggreagate etc Complete
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail