Supply Of Handheld Thermal Imaging Camera, Battery Analyzer, Rms Multimeter, As Per Specification Given In Tender , Supply Of Items , Handheld Thermal Imaging Camera Model: Tis75+ Or Higher Models Handheld Thermal Imaging Camera , Model: Tis75+ Or Higher Models With Minimum Specifications As Follows: 1 ) Infrared Resolution: 384X288 ( 110, 592 Pixels ) , 2 ) Spatial Resolution:1.91 Mrad, 3 ) Frame Rate: 9 Hz 4 ) Field Of View: 42° X 30°, 5 ) Minimum Focus Distance: 0.5M , 6 ) Ir-Fusion Technology: Autoblend Continuous 0 % To 100 % , 7 ) Temperature Range :Min-20 °C To 550 °C, 8 ) Thermal Sensitivity : =0.04 °C At 30 °C Target Temp ( 40 Mk ) , 9 ) Spot Temperature: Center Spot, 10 ) Spectral Band: ~8.0 ?M To 14 ?M 11 ) Standard Color Palettes: 6, 12 ) Wireless Connectivity: Topc, Wifi , Lan, Bluetooth, 13 ) Display:Minimum 3.5 ( 8.9 Cm Landscape ) Touch Screen 640 X 480 Lcd, 14 ) Warranty: Minimum 2 Years, 15 ) Safety Standars:Iec 61010-1 Deliverables To Be Included: A ) Thermal Imager With Standard Infrared Lens , B ) Two, Rugged Lithium-Ion Battery Packs , C ) Micro Sd Card , D ) Ac Powersupply ( Including Universal Ac Adapters ) , E ) Usb Cable , F ) Software With Life Long Free Software Upgrades. , G ) Rugged , Hard Carrying Case, H ) Soft Transport Bag With Adjustable Hand Strap. 15 ) Software Requirements: Full Analysis And Reporting Software To Be Includedin Free Of Cost With The Supply. 16 ) Gaurantee: The Equipment Shall Be Guaranteed For Trouble Free Performance And Against Any Defects In Material;Workmanship;Design And For Any Abnormal Behaviour For Period Of Not Less Than 18 Months From The Date Of Supplymake : Fluke / Flir / Testo , Battery Analyzer Model No:Bt510 Or Higher Models With Minimum Specifications As Follows: 1 ) Battery Resistance Range:3 Mohm - 3000 Mohm ( Min. Resolution Of 0.001 Mohm ) , 2 ) Dc Voltage Range:6V-600V ( Min. Resolution Of 0.001 Mv ) , 3 ) Ac Voltage Range :Upto 600V ( Min.Resolution Of 0.1 Mv ) 4 ) Frequency Range : Upto 500 Hz ( Min.Resolution Of 0.1Hz ) , 5 ) Ac Voltage Ripple ( 20 Khzmax ) Range:600Mv-6000Mv ( Min. Resolution0.1Mv ) , 6 ) Measurement Modes: Resistance ( Mohm ) , Battery Voltage, Voltage Dc, Voltage Ac And Frequency ( Hz ) , Ripple Voltage , 7 ) Safety Compliance:600 V Cat Iii , 8 ) Protection Class 2: Pollution Degree Ii Package Contents: A.Battery Analyser, B.4-Wire Test Pin Set, C.Btl10 Basic Test Lead Set, D.Tl175 Twist Guard Test Leads With Adapter, E.Bp500 7.4V 3000Mah Lithium Ion Battery, F.Bc500 18V Ac Charger, G.Mini-B Usb Cable H.Shoulder Strap, I.Belt Strap, J.Magnetic Hanging Strap, K.Soft Carrying Case, L.Spare Fuses ( 2 ) M.Zero Ohm Calibration Resistor Make : Fluke / Hioki / Any Approved , Industrial True Rms Multimeter Model No: Fluke 87V Or Higher Models With Minimum Specifications As Follows: 1 ) Voltage Ac / Dc: Upto 1000 V, 2 ) Current Ac / Dc: Upto 10A , 3 ) Frequency: Up To 200 Khz, 4 ) Resistance: 50 Mohm, 5 ) Capacitance: Upto 10000?F, 6 ) Duty Cycle: Upto 99.9%, 7 ) Temperature Range:-200.0 °C To 1090 °C, 8 ) Safety Specifications: En 61010–1 To 1000 V Cat Iii, 600V Cat Iv Package Content: 1 ) Industrial Multimeter, 2 ) Tl75 Test Leads ( Tl175 Eur ) , 3 ) Ac175 Alligator Clips, 4 ) Holster With Tilt-Leg, Test Lead Storage, 5 ) 9V Battery ( Installed ) , 6 ) 80Bk Temperature Probe Make : Fluke
