Name of Work: Supply and Commissioning of RIGID HULL INFLATABLE BOAT at Wular Lake, Bandipora.
Sl. No.
Item Description
1
Supply of RIGID HULL INFLATABLE BOAT
2
General:The rigid hull inflatable boat (RHIB) should be designed and constructed on the lines of a rescue boat but can be used as a work boat at sea. There should be five chamber air filled buoyancy tubes glued to the hull. Even if three chambers deflate during operation, the boat with persons will remain afloat and make head-way.
3
Boat Specifications: L x B x D = 4.20 x 1.70 x 0.60 mtrs(±0.05 mtr)Carrying capacity = Min. 6 persons. Empty boat weight = Approx. 150 kg.
4
Construction:The fiberglass rigid hull should be made from good quality marine grade resin and glass fibers. Adequate longitudinal and transverse fiberglass stiffeners to be provided for good structural strength. Air-tight buoyancy chambers below the floor should be provided to make the boat unsinkable.
5
The inflatable collars to be provided around the boat made of hypalon fabric and is abrasion resistant. There should be five individual chambers. Each chamber to be fitted with an inflation/deflation valve and an over-pressure relief valve. Rubbing strakes to be affixed on the collar for protection against any side impact. Life lines to be provided on both sides of the tube. Lifting handles and hand holds to be provided on the tubes.
6
Four stainless steel lifting eyes to be provided to enable the boat to be launched and recovered using a crane or boat davit. There should be three watertight compartments provided under the seats to store small boat equipment.
7
Accessories:A pair of paddles, bellows type pump, repair kit for the tubes, 6 Nos CE/MMD/IRS Approved Life Jacket to be provided.
8
Certification:-Complete boat should be IRS or CE Certified. Further, the boat manufacturer must be approved by the IRS. Work Approval to be submitted with the bid documents.
9
OBM: Min. 40 HP 2 Stroke Tiller Handle Mercury/Mariner/Suzuki/Yamaha OBM to be provided.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
