Tender For The Work Of New Electrification Work In Chemical Analogues Lab Mme 112 Department Of Metallurgical & Materials Engineering At V.N.I.T. Campus, Nagpur -1. Supplying and erecting PVC trunking (PVC casingncapping) of size 60 mm with accessories on wall/ceiling as per specification No: WG-MA/CON. 2. Supplying and laying PVC trunking (PVC cassing -ncapping ) ofa size 32 mm with accessories on wall / ceiling as per specification no WG-MA/CON. 3. Supplying and laying PVC trunking (PVC cassing -ncapping ) ofa size 25 mm with accessories on wall / ceiling as per specification no WG-MA/CON. 4. Supplying and erecting UPVC reinforced flexible conduit 25 mm in dia. conforming to I.S. and approved make with required number of couplings, PVC bushes, check nuts etc. complete. 5. Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW. 6. Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW. 7. Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW. 8. Supplying and erecting mains with 2x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW. 9. Supplying and erecting mains with 2x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW. 10. Supplying and erecting mains with 4x16 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW 11. Supplying, erecting & marking SPMCB 6A to 32A, Bseries with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB. 12. Supplying, erecting & marking SPMCB 40A to 63A, Bseries with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB. 13. Supplying, erecting & marking DPMCB 6A to 32A, Bseries with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB. 14. Supplying, erecting & marking DPMCB 40A to 63A, Bseries with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB. 15. Supplying, erecting & marking FPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SWSWR/ MCB 16. Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SWSWR/ MCB. 17. Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 12 ways /36 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB. 18. Supplying and erecting enclosure box for 100/200/250A MCCBs with necessary angle iron work in an approved manner. 19. Providing & erecting 4 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification. 20. Supplying and erecting terminal spreaders for use on MCCB incoming and outgoing terminals for 4 pole upto 100A MCCB complete. (Set of 8). 21. Supplying and erecting flush type shockproof plug socket 6A & 16A (6 pin) with 16A switch combined with indicator lamp and fuse with gang box on wooden board. 22. Wiring for plug on board with flush Switch socket, copper wiring and earthing as per specification No:WGPW/ SW 23. Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SW 24. Secondary point wiring for additional light/ bell point in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire with required accessories as per specification No: WG-PW/SW 25. Supplying & erecting decorative pre-wired box type fitting/batten suitable for 4 feet, T8 LED tube light (excluding tube light). 26. Supplying & erecting 18W/20W, 230V integral type LED fitting 4 T8 LED tube light batten suitable. 27. Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF. BLDC fan IR remote control speed regulator. 28. Supplying and erecting fan hook of 10 mm. M.S. round bar grouted in RCC slab with making the site as original. 29. Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire. 30. Supplying and erecting electronic type step regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep, complete erected on provided switch board. 31. Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete. 32. Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame. 33. Supplying and erecting double hylum plate of size 4x7 erected in approved manner. 34. Supplying and erecting Teak wood board of size 4x7 erected in approved manner. 35. Supplying and erecting double hylum plate of size 6x8 erected in approved manner. 36. Supplying and erecting Teak wood board of size 6x8 erected in approved manner. 37. Supplying and erecting double hylum plate of size 8x10 erected in approved manner. 38. Supplying and erecting Teak wood board of size 8x10 erected in approved manner. 39. Supplying and erecting double hylum plate of size 10x12 erected in approved manner. 40. Supplying and erecting Teak wood board of size 10x12 erected in approved manner. 41. Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL. 42. Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 25 to 50 sq mm., with necessary material as per specification No. CB-JT/LT 43. Supplying & erecting crimping type aluminium lugs for cable 50 sq mm complete (R,Y,B,N) as per specification No. CB-CL/AL 44. Supplying & erecting Double compression type brass cable glands for 3.5/4 core 50 sq mm for XLPE armoured cable as per specification No. CB-GL 45. Supplying and erecting crimping type copper lugs for cable upto 16 Sq mm complete as per specification No. CB-CL/CU. 46. Supplying & erecting UPVC gland/ adaptor suitable for 25/32 mm dia pvc pipe. 47. Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. 48. Dismantling the existing switchgears, DB, and bus bar of any size complete with/ without board or angle iron frame.
