Military Engineer Services-MES has published Tender For 8231 Certain Repair To Flooring, Brick Work, Roof / Sunken Treatment, Joinery, Roofing, Sanitary And Plumbing Works In Otm / Md Accn Of 6 Mtn Dou And 883 At Bn (Asc), Certain Unit And Complex Under Ge(E) Bareilly.. Submission Date for this Tender is 12-12-2022. Shed Construction Tenders in bareilly Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 18-Nov-2022 | Corrigendum01 | BOQ | 05-12-2022 |
| 2 | 05-Dec-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 12-12-2022 |
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed. |
| 2 | Taking down shutter of any description exc. 1 sqm but n exc 2 sqm each and removing from site complete all as specified and directed. |
| 3 | Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed. |
| 4 | Taking down shutter of any description exc. 1.5 sqm but n exc 4 sqm each and removing from site complete all as specified and directed. |
| 5 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawingcomplete all asdirected. |
| 6 | S&F 30 mm thick Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C" channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded / sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 7 | S&F in repair 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specifed as directed |
| 8 | S&F for 40 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 9 | S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain cham-fered or rounded, mitred and rebated sash bars, any numbers The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed by Engineer-in-Charge. (Note :- S & F wire messshall be measured and paid for separately) |
| 10 | S&F in repairs 18 mm thick imported pine wooden medium density fibre board fixed with frame icluding hold fast (as in shutter incl knob in each shutter) etc including magnet catcher built board with all necessary fittings complete all as specified and directed |
| 11 | M&L for powder coated aluminium sliding window with anodized aluminium frame of 3 Track of size 92mmx32mmx 1.5mm thick, with sliding shutters (02 glass and 01 wire cloth) with necessary channels (top rail, bottom rail and style of size 40mmx 18mm x1.10 mm thick) including glazing with tinted sheet glass panel 5.5mm thick and aluminum alloy wirecloth 4mm nominal dia and avg width of aperture 1.4mm, fitted with necessary jointing cleats, glazing clips, locking device one for each shutter, rubber packing, aluminium beading, screws, rawl plugs including all necessary holes / drilling etc, complete all as specified as directed. Note : If mentioned section are not available in market, then immediate next higher section shall be provided by Contractor without any extra cost. |
| 12 | M & L for providing aluminiium shutter with Powder coated frame 88.9mm x47.63mm x1.60 mm thick fixed with heavy duty aluminium hinge of size 125mm and size of shutter with top rail, middle rail and bottom rail and style of size85 mm x 44.5 mm x 1.56 mm thickwith200 mm size powder coated 2 nos with each leaf, Heavy duty powder coated aluminium tower bolt 150mm long 2 Nos per leaf, 3 nos Heavy duty aluminium powder coated of size 125mm with each leafincluding 12 mm thick both side prelaminated particle board / 5.5 mm thick glass pane in the both panel with necessary joining cleats, rubber packing, aluminium beading, screws etc complete all as specified and as directed. Note : If mentioned section are not available in market, then immediate next higher section shall be provided by Contractor without any extra cost. |
| 13 | S&F aluminium powder coated frame for louvers section of size 75x40x1.6mm including 4mm thick glass in louvors of 100 mm width with glazingcleat and revolving arrangement of standard section of aluminiumincluding rubber packing, aluminium beadingor gasket forfor aluminium sections for fixing glass sheet and necessary fittings complete screws plugs, handle, tower bolt, stay hooks including fixed Aluminium wire clothetcall as specified and directed. Note : If mentioned section are not available in market, then immediate next higher section shall be provided by Contractor without any extra cost. |
| 14 | S&F in rapair 4 lever brass mortise lock vertical type, size 100mm for aluminium door with 3 nos of keys compete all as specified as directed. |
| 15 | Dismantling of existing Aluminium door/window upto 4 sqm each compete all as specified as directed. |
| 16 | S&F150 mm aluminium anodised barrel tower bolts of extruded section,ISI marked compete all as specified as directed. |
| 17 | S&F150 mmextruded aluminium alloy handles , fabricated type, anodised, ISI marked compete all as specified as directed. |
| 18 | S&F100 mm MS butt hinges medium weight cold rolled mild steel compete all as specified as directed. |
| 19 | S&F300 mm longand Mild steel Chromium plated sliding door bolts, plate type,with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed compete all as specified as directed. |
| 20 | S&F 40mm width of flaps Continuous (piano) hinges, mild steel, bright finish or electrogalvanised compete all as specified as directed. |
| 21 | M&L for fancy type CB knobs of kitchen /drawer shutter compete all as specified as directed. |
| 22 | M&L for magnetic door lock for door shutters of CB and kitchen shutters of SS ISI marked compete all as specified as directed. |
| 23 | M&L for fancy type handles 100 mm high of kitchen shutter / CBshutter compete all as specified as directed. |
| 24 | M&Lforblind shutter hinge for door shutters of CB and kitchen shutters of SS ISI marked |
| 25 | M&L for magnetic door lock for door shutters of CB and kitchen shutters of SS ISI marked |
| 26 | S & F mild steel spring 250mm for door, ordinary rat tail rod pattern springs, including roller and roller plate including welding as required for steel frame compete all as specified as directed. Note:-work shall be carried out in MD Qtrs/ OTM accns in different locations of AOR GE east Bareilly as per site requirements upto 4 storieyed building |
| 27 | S&F in repair stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples in m s window / wooden shutter complete all as specified and directed |
| 28 | M & L two coats of synthetic enamel paint over one coat of pink primer on wood or wooden based surface exc. 10cm width or girth including preparation of new or previously untreated surfaces compete all as specified as directed. |
| 29 | S&F for steel windows conforming to IS-1038 with side hung shutters including box type hinges with 2 Nos, MS 100mm size tower bolt over MS flat iron for each openable leaf & Z section handle and steel peg stay complete with glazing bars, dovetailed or welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed. (Note :- Glassshall be measured and paid for separately). |
| 30 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar etc.complete all as specified and directed. |
| 31 | Demolition cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 32 | M&L 75 mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base floor / pavings complete all as specified and directed. |
| 33 | M&L 25 mm thick PCC 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in floors, surfaces finished fair and even complete all as specified and directed. |
| 34 | M & L for vetrified ceramic tiles 10 mm thick dark shade / Double charged / ultra charged square of size exc 0.42 sqm but n exc 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with andIncluding 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 35 | All as per Srl item No 34 here in before but in Vertical surfaces size n exc 0.36 sqm such as dado /skirting including 10 mm thick rendering of cement mortar 1:4 |
| 36 | M&L providing non- skid glazed ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge. |
| 37 | All as per Srl item No 36 here in before but in Vertical surfaces size n exc 0.36 sqm such as dado/skirting including 10 mm thick rendering of cement mortar 1:4 |
| 38 | M&L Glazed ceramic coloured tiles (square/ rectangular) with borderin vertical surface 300 mm x 450 mm / 300x600 x 7mm thick set and jointed in neat cement slurry andpointed in white cementor colouredcement to match the surface including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. Note : Engr-in-Charge will select sample from latest catalouge. |
| 39 | M&L providing non- skid glazed ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n exc 0.11 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge. |
| 40 | M&L for 75mm thick PCC 1:1½:3 , type B1 (using 20mm graded stone aggregate) as in floor complete all as specified and as directed. |
| 41 | M&L Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Gared A complete all as specified and as directed. |
| 42 | M&L in repairs for machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment laid dry over and including 40 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed. |
| 43 | Demolition of reinforcement cement Concrete in slab, kitchen platform and other similar suspended workpavings n exc 15 cm thickness complete all as specified and as directed. |
| 44 | M&L for reinforced cement concrete (1:2:4), type B1 (nominal mix) using 20 mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, shelves and the like complete all as specified and as directed. |
| 45 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed. |
| 46 | S&F mild steel TMT bar of 10 mm dia and over cut to length bent to shape required including cranking and binding with mild steel annealed wire not less than 0.9 mm dia complete all as specified and as directed. |
| 47 | M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado including 10 mm thick rendering of CM 1:4and jointed with grey cement slurry, and pointed with white cementwith admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed. |
| 48 | M&L 15-16 mm thick Italian marble (composite)in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of marble complete all as specified and directed. dust with admixture of pigment to match with shadecomplete all as specified and as directed. |
| 49 | M&L for 15-16 mm thick Italian marble (composite) on vertical surfaces 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with notching complete all as spd & as directed . |
| 50 | M&L 15mm thick rendering in cement mortar 1:4 to brickmasonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc including taking down existing cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed. |
| 51 | M&L for repairs to sunken floor slab with the following specifications:- (a)Demolition of PCC and taking out old brick bat fillihng and roughening surfaces of old concrete floor and wall by picking, sweeping clean and washing down with water to remove dust etc. (b)PCC 1:2:4, type B-0, using 12.5mm graded stone aggregate averaging 50mm thick as in sunken floor, with proper slope towards GI spout. The dia of GI Spuot pipe shall be 50mm Medium grade.The minimum length of Spout shall be 500mmand if any spout comes above chajja than the length of the spout shall be more than Chajja projection.Ends of Spout shall be tippered and any cutting through brick / RCC structure shall be done by the Contractor rates are deemed to be included of this aspects. (c) providing 15mm thick cement plaster in cement mortar 1:3 mixed with water proofing compound @ 3% by weight of cement over bottom and vertical surfaces finishing the surface even and smooth with using extra cement. (d) Damp proof course on horizontal / Vertical surfaces with preparation & applying one coat of primer (33% dilution) and two coats of undiluted material @ 10.67 lts per 10 sqm of Make :smart care Damp proof of M/s asian paint or equivelentfor water proofingcompound. (e) Graded Brick bats filling under sunken floorof required thickness as per site, (f)PCC 1:3:6,type C-1,using 20mm graded stone aggregate 75mm thick, over brick bats filling as in sub base. Note:- (i) For payment purpose only plan floor area shall be measured. (ii) After Coating of Water proofing compound ponding test shall be carried out by filling the sunken surface with water for 72 Hrs and get approved by Engr-in-Charge if any leakage/ seepage noticed the Contractor will re do the whole process without any extra payment. |
| 52 | Taking down carefully existing bitumen tarfelt including plastering upto 15mm thick cleaning the surface and make free of dirt, foreign particles, laitance followed by grinding all protrusions to make surface modulated and removingall foreign materials / Bitumenous primer completely , cleaning and washing the existing surface of roof/slab, terraces including flashings and junctions of parapets/Curb walls etc and as directed. Note : (i) Contractor will not thrown the debris and taking down material from roof will make suitable arrangement to get down the material from roof. (ii) If taking down of plaster is exceeding 15mm than PCC and plaster both shall be measured under ser item No 20 below (iv)Removing of the rubbish to a distance outside MoD landat own arrangement of Contractor. |
| 53 | M&L for providing ement concrete 1:2:4 Type B0 (Using 12.5mm graded stone aggregate) as in bed plate/roof kerb/PCC padding and haunching etec all as specified and directed by Engr in Charge Note : (i) PCC shall be laid in slope and thickness shall be averege(minimum average thickness 25 or as oer site requirement for maintaing the slope) as per site including filling in depression by providing concrete bench marks for maintaining th perfect slope to drain out the rain water as directed. (ii) No hand mixing is allowed, mixing shall be at ground floor and mixed materials deposited on roof by Manually/ mechanically to acheive the proper strength and workmen ship. |
| 54 | M&L for rendering 10 mm thick in CM 1:3 on concrete surfaces including mixed with water proofing compound @ 0.12 ltr per bag of cement or as per manufacturer instruction and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. (Note:- Cost of water proofing compound deemed to be included in quoted rates). |
| 55 | M&L providing cement slurry @ 3 Kg per sqm on existing roof surface before laying PCC/ Plaster complete all as specified and directed. |
| 56 | M&L for cleaning the newly plastered surfaces throughly with wire brushes and providing water proofing treatment all as given here in after (a) Bituminous primer @ 0.3lit per Sqm conforming to IS-3384-1986 (b) 3 mm thick APP polymer modified moply FPwith minimum wt 3.0 Kg per square metre membrane (one layer) laid by torch application method. (c ) Applying two coat of bituminous based aluminiumpaint @ 0.20 Kg in two coats (total in two coats) per square metre over membrane. Complete all as specified and directed by Engineer-in-charge. (d) The overlaps of APP shall be SSR part 1 and APP shall be laid by expert/ skilled workers only, bitumen based aluminiouspaint applied by brushes only. |
| 57 | Demolition cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 58 | M & L for cement concrete type C2 (1:3:6) (40 mm graded broken stone aggregate)75 mm thick as in plinth protection and finish even and fair complete all as specified and directed. |
| 59 | M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound of Grade A complete all as specified and directed. |
| 60 | M & L in repairs for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour approved by GEhaving tensile strength of 550Mpa as in roof covering / cladding to wall , fixed with 5 Nos. self tapping screws on each sheet / each support rubber lining and filling of gap with cement mortarin CM 1:4 with wall and sheet up to 6 mtr height complete all as specified and as directed. |
| 61 | All as per Srl item No 60 here in before but in ridges of same profile and minimum girth 750mm |
| 62 | S & F in repairs for 6 mm thick Fiber cement, (corrugated or semi corrugated) sheets in roofs, walls, fixed with L-type or J-type hook or cranked bolts completeall as specified and directed. |
| 63 | S&F in repairs for 6mm thick Fiber cement two piece adjustableserretedridge for corrugated, semi-corrugated etc sheetsfixed with L-type or J-type hook or cranked bolts complete all as specified and directed. |
| 64 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 65 | S&F steel work in tubular trusses of design as approved, purlins, rafter, posts, gusset plates cleats, wind tiesetc including special shape washers etc complete using ERW or induction butt welded tubes confirming to IS 116-1979 grade (medium grade) complete all as specified and as directed. |
| 66 | S&F in repairsgun metal, globe or gate valve, bore dia of pipe in 15 mm, complete all as specified and as directed. |
| 67 | S&F in repairs metal, globe or gate valve, bore dia of pipe in 20 mm, complete all as specified and as directed. |
| 68 | S&F GI tube 15 mm dia medium grade with all fittingsand fixed to wall, ceiling or laid in floors including taking down existing GI tubing 15 mm dia & connections complete all as specified and directed. |
| 69 | S&F GI tube 20 mm dia medium grade with all fittingsand fixed to wall, ceiling or laid in floors including taking down existing GI tubing 20 mm dia & connections complete all as specified and directed. |
| 70 | Taking down existing GI Tubing 15 mm dia & connections including cleaning and refixing serviceable GI tube 15mm dia with new fittings and fixed to wall, ceiling or laid in floor all as specified and directed |
| 71 | Taking down existing GI Tubing 20 mm dia & connections including cleaning and refixing serviceable GI tube 20mm dia with new fittings and fixed to wall, ceiling or laid in floor all as specified and directed |
| 72 | S& F in repair for20 mm dia CPVC pipe as on wall , floor , ceiling , concealedetc complete and as directed by Engr in chargewith all fittings and fixtured , jonting solution of ISI mark includingmaking grove in wall/ceiling and finished with cement mortor 1:4 with plumbing nails for securing pipes etc directed. |
| 73 | S& F in repair for25 mm dia CPVC pipe as on wall , floor , ceiling , concealedetc complete and as directed by Engr in charge with all fittings and fixtured , jonting solution of ISI mark includingmaking grove in wall/ceiling and finished with cement mortor 1:4 with plumbing nails for securing pipes etc directed |
| 74 | S&F in repairs wash basin mixer cast copper alloy, chromium plated central hole without popup waste system with 450mm long copper pipe and brass nut including hot & cold water system complete all as directed (Make : Jaquar /Prayag/Plumber or equivalent |
| 75 | S&F in repairs wall mixer cast copper alloy, chromium plated 3 in 1 system with provision for both over head showerchromium plated, with wall flange, screwed down, for iron pipe or for brass ferrule including dismantling of 3 No.concealled stop cock & 2 No. bib cock for each mixer ompleteall as specified and as directed |
| 76 | S&F in Repair Pillar taps , cast copper alloy , with capstan heads, chromium plated, screwed down high pressure fancy type of15 mm bore size with or without lettered Hot or Cold with long screwed shanks and flynuts , screwed for iron pipe and fixedComplete all as specified and as directed. |
| 77 | S&F in Repair Cast copper alloy CP angle valve type stop cock suitable for 15mm bore pipe screwed at both endsor high pressure with Capstan head including dismanteling and making good the tiles if required complete all as specified and as directed. |
| 78 | S&F in Repairbib taps of bore size 15mm, cast copper alloy, chromium plated,fancy type, with crutch or butter fly handle screwed down , screwed for iron pipe or for brass ferruleIncluding dismanteling and making good the tiles if requiredComplete all as specified and as directed. |
| 79 | S & F in Repair brass cromium plated conceled stop cock of bore size 15 mm, in position conceledin walls/ceilingsor floors complete duly making grooves filled with cement mortar in 1:4 finished to match with adjacent surfaces Including dismanteling and making good the tiles if requiredcompleteall as specified and as directed. |
| 80 | Supply and fixing in repairs 100 mm dia CP brass shower rose swivel type with extension CP rod 15mm dia and 300mm longwith connecting rod suitable for 15mm bore pipe complete all as specified and directed. |
| 81 | S&Fin RepairPVC connection 15mm size with PTMT nuts, of length 600mm Complete all as specified and as directed. |
| 82 | S&F in repair Toilet paper holder chromium plated fixed with CP screws of Make Prayag/Parko/saiko |
| 83 | S & F in Repair viterous china wash hand basin of size 550 x 400 mm, white colour flat back excluding taps, chain and plug and porcelean stopper but including brackets and CP waste fitting complete all as specified and as directed. |
| 84 | S & F in repairs vitreous china wash down water closetpedestal pattern(EWC) white excluding flushing cistern & inclwhite seat coverclosed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device andflush pipe complete all as specified and directed. |
| 85 | S&F in repairs vitreous china squatting pan Orissa pattern size 580x440mm white with P or S trap front or back inlet and integral foot rests including connection to trap to flush pipe etc complete including for making good to floor etcComplete all as specified and as directed. |
| 86 | S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including fixing plugs , bedding urinal against wall in cement mortar (1:2) etc. including CP Waste fitting and PVC waste pipe.Completed all as specified and directed by Engineer-in-charge. |
| 87 | S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed . |
| 88 | S & F in repairs CP health faucet special (1.5 mtr tube) with hook for EWCcomplete all as specified and directed. |
| 89 | S&F in Repair Brass chromium plated tubular towel rail 20mm dia 60cm long with and including flanges completeall as specified and as directed by Engineer-In-Charge |
| 90 | S & F in repairs soap dish stainless steel as approved by GE complete all as specified and as directed by Engineer-In-Charge. |
| 91 | S & F for PVC (SWR) pipes, bore of pipe in 110mm, single socketed, in any length, with rubber ring joints, laidin floors or fixed to wallsComplete all as specified and as directed. |
| 92 | S&F PVC (SWR)pipe single socketed in any length with rubber ring joints,laid in floors 75mm dia Complete all as specified and as directed. |
| 93 | Supply and fixing in repairsLow density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 of40 mm dia borefor wash hand basin Complete all as specified and directed. |
| 94 | S&F in repairsPVC(SWR)branch pieces, single (Single Y) equal or unequal or with parallel branches 75mm dia Complete all as specified and as directed. |
| 95 | S & F in Repair for PVC (SWR) bends, any radius, bore of pipe in 75mm with cement solvent in position .Complete all as specified and as directed. |
| 96 | S & F in Repairfor PVC (SWR) bends, any radius, bore of pipe in 110mm with cement solvent in position Complete all as specified and as directed. |
| 97 | S&F rotational moulded polethylene water tank of 1000 ltrs capacity, white coloured, ISI Marked (cylindrical vertical with closed top with suitable size ofM S Tasla with suitable locking system) hoistedand fixed in position all as pacific SSR Part- I including dismantling ofexisting water tanks capacityn exc 1000 ltr complete all as specified and directed. |
| 98 | S&F rotational moulded polethylene water tank of 500 ltrs capacity, white coloured, ISI Marked (cylindrical vertical with closed top with suitable size ofM S Tasla with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I including dismantling of existing water tanks capacityn exc 500 ltr complete all as specified and directed. |
| 99 | S&F in Repair Stainless Steel Plate Rack of size 31"" x 30"" x 10"" with using stainless steel sheet of0.63mm thicknessFixed with Rawl plug and screw. completeall as specified and as directed. |
| 100 | S&F in Repair stainless steel sinks with drainage board made of1mm thick stainless steel sheet for kitchen or laboratory with plugs washers and waste pipe including fixing cantilever brackets and connecting union to pipe overall size not less than 915mm x 460mm and bowl size 410mm x 330mm x160mm.completeall as specified and as directed. |
| 101 | S & Fin Repair 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washersComplete all as specified and as directed. |
| 102 | S & F in repair PVC floor trap with CP grating weight of grating not less than 35 grams joints to waste pipe in run lead joint dia of outlet 75 mm of floor, trap with deep water seal and of heavy weight coated with tar/black bitumen paint including making good with existing surfaceby provision of tiles and refilling of the dismantel mnaterials complete all as specified and directed by Engineer-in-charge. |
| 103 | S&F of loosed window glasses with oil putty complete with making good complete, window not exceeding 1.50 Sqm |
| 104 | Supply and fixing 3 mm thick figuredglass ordinary quality and size in any type of frames and glazing with oil putt (or beading) in square exc. 0.5 Sqm each.with hacking out of old glasses Complete all as specified and directed. |
| 105 | S & F for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pane for steel/ aluminium windows with hacking out of old glasses compete all as specified as directed. |
| 106 | Supply and fixing in repairs GI wire cloth power woven 0.56 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples for steel window and ventilator including providing MS beads and SS screws. Complete all as specified and directed by Engineer-in-charge. |
| 107 | S & F in repairs GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tracks or wooden beeding patti.to gauge door shutters and wooden windows compete all as specified as directed by Engineer -in -charge |
| 108 | Supply and fixing in repairs Aluminium wire cloth power woven 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples for Aluminium window and ventilator complete all as specified and directed by Engineer-in-charge. |
| 109 | M&L for welding in repairs exc. 2.5cm but n exc. 5cm in length, thickness of metal towelded exc 6mm but n exc 9mmfor steel windows, ventilators door frames , door hinges , door springs etc compete all as specified as directed by Engineer -in -charge |
| 110 | S & F in repairs curtain rod of CP MS25mm dianot less than 1.5mm thicknesswith chromium plated projected bracket both side as per sample fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified as directed by Engineer -in -charge |
| 111 | M&L for drilling holes for pipes etc in cadappa/graniteincluding RCC slab nexc 25mm dia and nexc 100mm depth |
| 112 | M&L Double action floor spring hydraulically regulated made ISI marked make: Dorma up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed by Engineer in Charge |
| 113 | M& L for preparation of newly plasted wall surfaces and applying three coats of texture (Super fine) finished painting with the following process the surfaces should be completely dry and free from loose particles including preparing the surface with emry paper 180 nos and wipring clean and applying one coat of primer and allow drying for 6 to 8 hours then smoothen the surface by filling dints with thin coat of acrylie wall putty after drying for 4 to 6 hours and preparing the surface with emry paper and clean and applying another coat of primer and allow drying for 6 to 8 hours and then emulsion 1 Ltr with 500 ml water and applying with brush follwed by rolling with sponge roller or filter roller, applying three coat with brush and roller with and interval of 3 to 4 hours between successive coat all as per manufactures instruction complete all as specified and directed |
| 114 | M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coatof red oxide zinc chrome primer complete all as specified anddirected. |
| 115 | M&L for preparing newly plastered walls surfaces and applying two coats ofoil bound distemper over1mm thickwall care puttycomplete all as specified and directed. |
| 116 | M&L for preparing newly plastered walls surfaces and applying two coats of cement base paint over a coatoverone coat primercomplete all as specified and directed. |
| 117 | M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed. |
| 118 | M&L for Providing & injecting chemical for post construction ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in a portion with cement mortar 1:2 to match the existing apron complete all as specified and directed. |
| 119 | M & L for Post Construction anti termiteTreatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same as specified and directed. |
| 120 | M & L for Post Construction anti termiteTreatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor soilcomplete as specified and directed. |
| 121 | M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as spd as directed |
| 122 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. |
| 123 | Providing & fixing in repairs false ceiling at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanized iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
