|
| 1 | S&F aluminum anodized powder coatedparttion fixed/sliding type with frames of size -side andtop rail 85x44.45x1.8 mm ,bottom and middle rail of size 150 x44.45 x 1.8mm thick incl. screwing of frame glass necessary joints cleats, glazing clips rubber packing, snap beading, fixed to wall with necessary screws and plug complete all as specified & directed. (rates for 5 mm thick tinted glass / aluminum composit panels reqd to be fitted in shutters is included in the item ). |
| 2 | S&F aluminum anodized powder coateddoor shutter sliding type with frames of size -side andtop rail 85x44.45x1.8 mm ,bottom and lock rail of size 150 x44.45 x 1.8mm thick incl. screwing of frame glass necessary joints cleats, glazing clips rubber packing, snap beading, suitable handle ,mortice lock 4 lever with 65 mm latch size includingaluminiumanodized door frame of size 101.5x 44.45 x1.8 mm thick fixed to wall with necessary screws and plug complete all as specified & directed. (rates for slider channel,roller& 5 mm thick tinted glass / powder coated aluminium panels reqd to be fitted in shutters is included in the item ) |
| 3 | S&F Aluminum powder coated two track sliding windows with two sliding shutters of 5mm thick glass pane, including suitable nylon beading channel gasket, nylon rollers Maruthi lock with handles etc complete with following specification :-(a) Shutter side frame (Handle):- CAT No. :- 8903, Weight :- 0.325Kg/m, Make :- Jindal (2Nos)(b) Shutter side frame:- CAT No. :- 8902, Weight :- 0.380Kg/m, Make :- Jindal (2Nos)(c) Shutter top and bottom:- CAT No. :- 8901, Weight :- 0.325Kg/m, Make :- Jindal (4Nos)(d) Frame bottom:- CAT No. :- 8688, Weight :- 1.070Kg/m,Make :- Jindal (1Nos)(e) Frame top and side:- CAT No. :- 8689, Weight :- 0.933Kg/m, Make :- Jindal (3Nos)(f)Glazing:- 5 mm thick sheet glass of selected quality exc 0.50Sqm each pane fixed to aluminum frame including solar control film 25 micron reflected type stacked to glass pane as per manufacturer instruction (for 2 Shutters) |
| 4 | S&F Non asbestos fibre cement building boards fixed or laid/ inserted to GI/Alumi nium framework with screws designer type as in false ceiling with & including aluminium snap grid of size and fixed with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified with all connected accessories, fittings & fixtures complete all as specified and directed. |
| 5 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of gradeAC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. |
| 6 | Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil. |
| 7 | Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m deep for foundation and getting out in hard/dense soil. |
| 8 | Returning/filling in including spreading, levelling, watering and well remming in layers n.exc 25 cm in hard/dense soil. |
| 9 | Removing excavated material n.exc 50m and depositing where directed at a level n exc 1.5m above the starting point. |
| 10 | M&L hard core of gauge n.exc 63mm, deposited, spread and levelled in layers nexc 15 cm thick, watered and rammed to a true surface. |
| 11 | M & L75mm thick sub base cement concrete type C2 (1:3:6)using (40mmgraded aggr.) as per direction of Engineer in-charge. |
| 12 | M&L for 75 mm thick plain cement concrete type C-1, 1:3:6, (40mm graded stone aggregate)as in plinth protection,hardstanding and subbase finishing the top surfaces even and smooth W/O using extra cement. |
| 13 | M&L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in finishing using extra cement for smooth surface as per direction of Engineer in-charge. |
| 14 | M&L for 75 mm thick Sub base Cement concrete type D2, 1:4:8 (40mm graded aggregate) as per direction by Engineer in-charge. |
| 15 | M&L for PCC 100mm thick, type B-2, 1:2:4 (using 40mm graded stone agg) in sub-floors, sub-base, floors and pavings etc. |
| 16 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and Brushing neat cement slurry with 3.0kg of cement per sq. metre. |
| 17 | M&L for Chequered cement concrete tiles 200x200x25mm including 20mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes etc. setand jointed and pointed in neat cement slurry in floor with grey cement and pigment all as directed. |
| 18 | M&L for Chequered cement concrete tiles 200x200x25mm etc. setand jointed and pointed in neat cement slurry in floor with grey cement and pigment all as directed. |
| 19 | M&L for Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes with CM 1:6 complete as per direction by Engineer in-charge. |
| 20 | M&L forProviding, cement concrete type C1 (1:3:6) using 20 mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edgesas per direction by Engineer in-charge. |
| 21 | M&L for PCC 1:4:8 type D2 using 40mm graded agg as in foundation filling and mass concrete as per direction by Engineer in-charge. |
| 22 | M&L rendering 15mm thick in CM 1:6 on concrete surfaces finished even and smoothwithout using extra cement as per direction by Engineer in-charge. |
| 23 | M&L rendering 10mm thick in CM 1:4on brick orconcrete inner surfaces finished even and smooth without using extra cement . |
| 24 | Material and labour for 10mm thick rendering in cement mortar (1:3) on brick or concrete surfaces of ceiling finshed even and smooth without using extra cement. |
| 25 | M&L rendering 15mm thick in CM 1:4on brick or concrete outer surfaces finished even and smooth without using extra cement . |
| 26 | Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter |
| 27 | Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete. |
| 28 | M&LforPCC 1:4:8 type D2 using 40 mm graded stone aggregate in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) |
| 29 | M&L Preparing newly plastered surfaces of walls and applying 3 coats of white wash. |
| 30 | S&F75 mm dia PVC (SWR) pipe in any length with rubber joints laid in trenches or floors |
| 31 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing). |
| 32 | M&L non - skid Ceramic tiles 7 to 8 mm thick areaof each tileexceeding 0.18 sqm butnot exceeding 0.38 sqm, in floors including 15 mm thick screed bed in CM 1:6 for laying floor tiles. etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval ofcolour and pattern of tile by GE/Engr-in-charge. |
| 33 | Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones. |
| 34 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beading in squares not exceeding 0.5 Sq. M in each pane. |
| 35 | S&F Sheet glass, ordinary quality, in squares 4.8mm thick glass glazing with putty/beads n.exc 0.5 Sqm each pane. |
| 36 | Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames) |
| 37 | S&F Steel windows with side hung shutterswithout glazing bars, dovetailed or welded including projecting type hinges with steel handle, and steel peg stay complete all as specified. |
| 38 | Taking down Shutters of any description exc 1 sq. m but n.exc 2 Sqm each and removing to store. |
| 39 | Supply and fix 30mm thick 2nd class hardwood plain framed paneled shutters (any numbers of panels) with panel of timber flat on both sides (feather edged) complete including fitted to chowkats |
| 40 | Supply and fix 100mm long MS butt hinge medium weight cold rolled. |
| 41 | Supply and fix aluminium anodized barrel tower bolt 150mm long extruded section. |
| 42 | Supply and fix 150mm size aluminium anodized handle fabricated type |
| 43 | S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed. |
| 44 | M&L for PCC 1:3:6 type C2block masonry with solid blocks, exc 10cm in width and setting in cement mortar 1:4 complete all as specified and directed. |
| 45 | M&L for PCC 1:3:6 type C-1(20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete. |
| 46 | Demoloition of cement concrete of any description and in any situation not otherwise specifically provided with all as per specified and directed. |
| 47 | M&L for Plain cement concrete (1:3:6) type C-2, using 40mm graded stone aggregates in surface channel, bed of drains incl form work / moulds complete all as directed. |
| 48 | Taking down cement plaster on brick, concrete stone surfaces etc including raking out joints, hacking for key, scrubbing down with water etc. |
| 49 | Dismentling plain or corrugated steel sheeting of any thickness as in roof and wall covering with omplete all as directed. |
| 50 | S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specifie |
| 51 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 52 | S&F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275. |
| 53 | Supply and fix Chromium plated curtain rod of medium weight and fixing brackets and decorative end supports etc complete all as specified and directed |
| 54 | Material and labour for preparation of old treatment on external surfaces of walls and washing down with water to receive the surface and applying one coat of cement base paint (colour and tint as approved) on walls etc complete all as specified and directed. |
| 55 | Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 56 | M&L for Mild steelTMT bars 10mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips all as specified and directed. |
| 57 | M&L for Reinforced Cement Concrete Type B1, 1:2:4 (using 20 mm graded granite stone aggregate) for slabs suspended on walls, beams and columns, in floors, roofs, landings and in shelves and the likeall as specified and directed. |
| 58 | M&L for applying two coats of synthetic enamel paint over one coat of red oxide including preparing new zinc (or galvanised) surfaces to receive painting by coating with mordant solution including washing and cleaning etc on steel surfaces of any description. |
| 59 | M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 60 | Supply and fix 2nd class hard wood plain solid straight chowkats and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints |
| 61 | M & L for second class hard wood in scantling cleane sawn with complete all as per specified and directed. |
| 62 | M & L for second class hard wood in scantling cleane sawn as in frame work with complete all as per specified and directed. |
| 63 | Supply only Integrated water proofing compound |
| 64 | Preparing newlyplastered wall surfaces and applying Two coats of cement base paint on wall surfaces over one coat of primer |
| 65 | M&L for PCCtype B1 1:2:4 (20mm graded aggregate) as in coping with complete all as per specified and directed. |
| 66 | M & L for 350x250x7 mm/450 x 350 x7 mm thick glazed coloured ceramic tiles on vertical surface of wall including 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished rough to receive tiles etc.set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval ofcolour and pattern of tile by GE/Engr-in-charge. |
| 67 | M & L for 350 x 250 x7 mm or 450x350x7mmthick glazed coloured ceramic tiles on vertical surface of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. (Make; Kajaria/ Orient Bell/ Johnson/ Somany).Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval ofcolour and pattern of tile by GE/Engr-in-charge. |
| 68 | M & L for screed bed or bedding layer of15 mm thick for laying floor finishes in CM (1:6 ). |
| 69 | M&L machine cut Kota stone slab 20 to 25mm thick as in flooring laid over and including screed bed 20mm thick in CM (1:6) laid and jointed with cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed. |
| 70 | M&L for joint free Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in vertical surfaces etcset and jointed in neat cement slurry and pointed in white/coloured cement to match the shade . (Make; Kajaria/ Orient Bell/ Johnson/ Somany).Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval ofcolour and pattern of tile by GE/Engr-in-charge. |
| 71 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed & drawing |
| 72 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm widthtuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of lain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheetbeading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed & drawing. |
| 73 | Dismantling of wall and ceiling boards of any thickness including cover fillets. |
| 74 | M & L for 9 mm thick ply wood, grade BWR, type BB, fixed with screw to timber frame work on wall surfaces complete all as specified and directed |
| 75 | M & L for 6 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on ceiling surfaces complete all as specified and directed |
| 76 | M & L for 2 nd class soft wood plain fillets, square, rectangularor triangular in section,wrought, secured with nails or brads, sectional area exc 3 but n.exc 6 sq.cm complete all as specified and directed |
| 77 | M & L for green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms, floor and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble all as specified and as directed. |
| 78 | S&F 18/19 mm MDF DWR prelaminated particale board ,interior grade , prelaminated one side with decorative choice lamination & other side balancing white lamination ,fixed with screws to timber frame work complete all as specified and directed. |
| 79 | Supply and fixingcontinuous hinges (Piano) hinges,30mm brass,brighgt finish or electro galvanised complete all as specified and directed. |
| 80 | M & L for Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed all as specified and directed. |
| 81 | M & L for Extruded brass handles, fabricated type polished of size 100mmcomplete all as specified and directed. |
| 82 | S&F MS window guard bars, window frames plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 etc articles confirming to Fe 290-0 or E-165 all as specified and directed. |
| 83 | S&F 100mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed all as specified and directed. |
| 84 | S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised. handle fabricated type. |
| 85 | Supply andfix chromium plated brass Bib taps,cast copper alloy with crutch or butterfly handle, screwed down for iron pipe for 15mm bore GI tubing complete all as specified and directed by Eng-in-charge. |
| 86 | S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints laid in trenches or floors. |
| 87 | S&F75 mm diaPVC (SWR) floor trap, plain with grating including jointing with solvent cement. |
| 88 | M&L cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) to bed of drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 110 mm bore pipe complete all as specified and directed |
| 89 | S&F PVC (SWR) \"P’ trap of 100mm dia. |
| 90 | S&F PVC (SWR) bends any radius with access door, 110mm dia. |
| 91 | S&F in20mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches.(Make : Jindal/Nezone/NTL/Bansal) |
| 92 | S&F in15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches.(Make : Jindal/Nezone/NTL/Bansal) |
| 93 | S&FPVC connection of 15 mm size withPTMT nuts of length 600 mm. |
| 94 | S & FVitreous China squatting pan, \"Orissa\" pattern, size 630 x450 mm white, with integral foot rest (excluding flusing cistern and flush pipe). |
| 95 | S & F 10 litres PVC, valve less, Syphonic action type, Flushing cistern low level, white with inlet ball valve float chain and pull and bracketscomplete. |
| 96 | S & F fancy type chromium plated 20mm dia stop valve , cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified |
| 97 | S & F fancy type chromium plated 15mm dia stop valve , cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified |
| 98 | S&F Mild steel flat ironas in hold fasts; complete all as specified. |
| 99 | M&L for providing precast reinforced cement concrete 1:2:4 type B1 using 20 m gradedstone aggregate as in landings,staircase slab, cover slabs(for men holes etc) chullah hoods,chhajjas water troughs mangers,shelves and similar articles with plain faces. |
| 100 | S&F PVC water storage tanks of 1000 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified |
| 101 | S&F ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified |
| 102 | S&F Gun metal 15 mm bore globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed. |
| 103 | S&F Gun metal 20mm bore globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed. |
| 104 | M&L for Providing, cement concrete type B-1, 1:2:4 (20mm graded aggregate)in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 105 | Taking down copper/aluminium point wiring (light, Bell, fan, socket or power) complete and removing material to store for keeping in safe custody or for taking credit and making good the disturbed surfaces of wall /ceiling so as to match with the existing finishes complete all as specified and as directed. |
| 106 | M&L for Point wiring with PVC insulated and unsheathed multistranded FRLS copper conductor single core 1.5 Sqmm (nominalarea) cable using approved colour code as per IS drawing in and incl PVC casing and capping (ISI Mark) with all accessories including providing PVC board heavy duty incl providing plastic laminated bakelite sheet top coveralongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cableof size 1.5 Sqmm as continous earth wire connected to common earth and earth dolly complete all as specified. |
| 107 | One light /Fan point controlled by one switch 6/5 Amp. |
| 108 | One 3 pin socket outlet 6/5 Amps controlled by one switch on the same board with other switches. |
| 109 | One 3 pin 6/5 Amp socket outlet controlled by one switch indep board. |
| 110 | M&L Point wiringof Power point contolled by one 15 Amp switch independent with PVC insulated and unsheathed multistranded FRLS copper conductor single core 4.0 Sqmm (nominalarea) cable using approved colour code as per IS drawing in and incl PVC casing and capping(ISI Mark) with all accessories including providing PVC board heavy duty incl providing plastic laminated bakelite sheet top cover alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cableof size 4.0 Sqmm as continous earth wire connected to common earth and erth dolly complete all as specified and as directed. |
| 111 | S&F switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts including taking down unserviceable one complete all as specified & directed. |
| 112 | S&F switch socket combination 2 in 1, 3 pin, 6 Amp piano flush type (ISI marked),240 Volts including taking down unserviceable one complete all as specified & directed. |
| 113 | S&F switch socket combination 2 in 1, 3 pin, 16/15 Amp piano flush type (ISI marked),240 Volts including taking down unserviceable one complete all as specified & directed. |
| 114 | S&F ceiling rose, surface bakelite, 65mm x 50mm ,two to three terminals including taking down unserviceable one complete all as specified & directed. |
| 115 | S&F lamp holder insulatedbodywith back plate suitable for batten fittings including taking down unserviceable one complete all as specified & directed. |
| 116 | S&F Regal Batten for LED Tube, universal batten for G 13,T8 lamps complete with all accssories internally pre wired and incl connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable including Photon Ultra Plus LED Tubelight 20 Watt (Single Side Connection) Ultra bright LED polycarbonate Tubelight with 10% THD with very high efficiency suitable for intalltion in T8 Tubelinght with G 13 lamp holders to give glare free light with integrated electronic driver and mounting casing box 2 Nos including taking down unserviceable one complete all as specified and directed. Make: Crompton Greaves Cat Part No IGP161LT-8-16 <T8-20 or equivalent in Phillips/Bajaj/Havells |
| 117 | S&F environmental friendly, ultra modern, energy saving, surface mounted decorative hexagon LED bulk head 10Wincluding connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable including taking down unserviceable one complete all as specified and directed.Make : Crompton Greaves - Cat Part No LBHP-10-CDL or equivalent in Philips / Bajaj / Havells |
| 118 | S&F LED lamp 15 watt, CDL, B-22 cap, (Pin type), 230V, PF not less than 0.85 (min) including taking down unserviceable one complete all as specified and directed . Make - CG/Havells/Philips/Bajaj |
| 119 | S&F MCB DB CRCA sheet powder coated SPN 8 way double door factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables incl taking out existing unsv DB of any size and making good disturbed surface to match with existing complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand |
| 120 | S&F MCB SPN having braking capacity 10 KA. 35 to 60 Amp, 240 volts C curve including taking down unserviceable complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand |
| 121 | S&F MCB single pole having braking capacity 10 KA, 6 to 32 Amps 240 voltsincluding taking down unserviceable complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand |
| 122 | S&F 1100 volts grade heavy dutyflat twin core cable PVC insulated with stranded aluminium conductor of size 16 sqmm and overall PVC sheathedin service connectionsincl dismentling taking down unserviceable one all as specified and directed. |
| 123 | Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below notmal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1,precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and medium grade GI wire protection pipe 25mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing complete all as specified and testing on completion complete all as specified and as directed. Note:- The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI pipe (light grade) for watering 25mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made. |
| 124 | S&F Wall mounted Mirror light LED fitting,10/11/14 Watt, 2 Feet long incl integrated electronic driver complete all as specified and directed. Make : CG/Philips/Bajaj/Havells |
| 125 | S&F MCB DB CRCA sheet powder coated SPN 4 way double door factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables complete all as specified and as directed.Make : Havells/L&T/ABB/Schneider/Legrand |
| 126 | S&F 1100 volts grade heavy dutyflat twin core cable PVC insulated with stranded aluminium conductor of size 10 sqmm and overall PVC sheathedin service connections incl pipe protection as per site requirementcomplete all as specified and directed. |
| 127 | S&F Exhaust fan of size 250mm sweep, plastic body with louver single phase suitable for 230 volts 50 Hz and connecting upcomplete including provision of 3 core flexible cord cable of size 27/0.183 from ceiling rose to connector of fancomplete cutting of holes and fixing arrangement on wall all as specified and as directed. Make : Havells/CG/Bajaj/GEC |
