|
| 1 | ITEM.NO.1.Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.(I No.46.13) |
| 2 | ITEMNO.2..Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand( I.NO.25.31First Floor |
| 3 | Second Floor |
| 4 | Third Floor |
| 5 | ITEMNO.3 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)( I.NO.25.50) First Floor |
| 6 | Second Floor |
| 7 | ITEMNO.4 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landingsas per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)( I.NO.25.70) First Floor |
| 8 | Second Floor |
| 9 | ITEMNO.5 Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.chajjaasperdetaileddesignanddrawingsincludingsteelcentering,formwork,coverblocks, laying/pumping,compactingand rougheningthesurfaceif specialfinishistobeprovidedandcuring complete. (Excluding reinforcement and structural steel). withfullyautomaticmicroprocessorbasedPLC with SCADAenabled reversible DrumType mixer/ concrete Batch mix plant (Pan mixer) etc. complete.Withfineaggregate (Crushed sand VSI Grade) First Floor |
| 10 | Second Floor |
| 11 | ITEMNO.6 Providing and fixing in position T.M.T. Bar reinforcement of various diameters for reinforced cement concrete pile caps, footings, foundations, slabs, beams, columnscanopies , stair case, newels, chajjas, lintels, pardis copings,finns, arches etc as per detailed designs, drawings and schedules including cutting, bending hooking the bars binding with wires or tack welding and supporting as required complete ( I.No.26.33 ) First Floor |
| 12 | Second Floor |
| 13 | Third Floor |
| 14 | Item No.7)Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete ( I.NO.27.05) First Floor |
| 15 | ITEM NO.8 Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.Complete First Floor |
| 16 | Item.No.9) Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. ( I.NO.32.11) First Floor |
| 17 | ITEM NO.10 Providing and fixing frame with / without ventilator of A21A21size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete(I No.39.01) First Floor |
| 18 | ITEM NO.11.Providingandfixingsingleordoubleleafpanelleddoorshutterexcludingframewithglazedopenable fanlightshutter35mmthickasperdetaileddrawingconsistingpanelledvertical styles 100 mm x 35 mm and lock and bottom rail 200 mm x 35 mm and panels 12 mm thick both side commercial ply faced particle board including stainless steel fixtures and fastening and T.W. beading at junctions of panel insertsandas instructedbytheEngineerinchargeincluding3coatsofoilpaintingetc. complete.( I.No.39.07) First Floor |
| 19 | ITEM NO.12.Providing andfixing mild steelgrill workfor windows,ventilators etc+A30.20 Kilogram/Square Metre as per drawing including fixtures,necessarywelding andpainting withone coatsof anticorrosive paint and two coats of oil painting complete. First Floor |
| 20 | ITEM NO.13Providingandfixinginposition. (asper I.S.1868 / 1982) Aluminiumslidingwindowoftwotrackswith rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/Running metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm atweight 0.695Kilogram/Running metre. Topandside track section61.85x31.75x 1.30 mm at weight 0.659 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Runningmetre. As perdetailed drawingsandasdirectedbyEngineerinchargewithallnecessaryAluminiumsections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section ofshutterincluding 5mm thickplainglasswithallrequiredscrewsandnutsetc,complete.Withpowder coating without box(Item.No.39.40) First Floor |
| 21 | ITEM NO.14 ProvidingandlayingmachinecutmachinepolishedmachinecutKotastoneslabs20to25mm thickfor treads andrisers of steps andstaircases, withroundednosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complet First Floor |
| 22 | ITEM NO.15.Providing and applying plastic emulsion paint of approved qualitycolour and shade to old and new surface in two coats including scaffolding preparing the surfaces (excluding the primer coat) complete. (BDP 6 Page.No.414 eDSR I.No. 36.12) First Floor |
| 23 | Item.No.16)Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to oldplastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc.complete.I.No. 35.14 First Floor |
| 24 | ITEMNO.17.Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.I.NO.42.28 First Floor |
| 25 | Add For Royalty Sand |
| 26 | Add For Testing |
| 27 | Add For Inusrance |
| 28 | Add For GST |
