|
| 1 | Dismantling & removing doors ,windows and ventilators including removal of frames ,hinges etc |
| 2 | Dismantling brick or stone masonry in cement mortar under3.0m height including stacking the useful materials |
| 3 | Dismantling and removing R.C.C.columns beams slab staircase landing lintels including stacking the useful materials for reuse and removing the debris within 50m |
| 4 | Excavation of foundation in hard soil within 50 m initial lead and 1.5 m initial lift including rough dressing and levelling as per the direction of engineer in charge |
| 5 | Filling foundation and plinth with sand well watered and rammed including cost and conveyance of materials. |
| 6 | C.C.(1:4:8) with 4 c.m. size h.g. metal in F&P. |
| 7 | Filling in foundation and plinth with excavated materialsincluding watering and ramming |
| 8 | Brick work with CB bricks inC.M(1:6) in Super structure 1st Floor |
| 9 | Brick work with CB bricks inC.M(1:6) in Super structure in Second Floor |
| 10 | RCC Work M-20 grade with 20 mm and down grade HG chips (CB) including hoisting,lowering & laying concrete and compacting by using vibrator ramming for ground floor |
| 11 | (a) Column and beam |
| 12 | (b) Roof Slab |
| 13 | RCC Work M-20 grade with 20 mm and down grade HG chips (CB) including hoisting,lowering & laying concrete and compacting by using vibrator ramming for 1st floor |
| 14 | (b) Lintel |
| 15 | (c) Column and beam |
| 16 | (d) Sun shade, loft and Chajja |
| 17 | (e) Roof slab |
| 18 | (f) Stair |
| 19 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification in ground floor |
| 20 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification in first floor |
| 21 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification in second floor |
| 22 | 6mm thick cement plaster in C.M(1:4)R CC surfaces for ground floor |
| 23 | 6mm thick cement plaster in C.M(1:4)R CC surfaces for First floor |
| 24 | 16 mm thick cement plaster in c.m(1:6) over brick masonry, inside walls in first floor |
| 25 | 16 mm thick cement plaster in c.m(1:6) over brick masonry, inside walls in Second floor |
| 26 | 12 mm thick cement plaster in c.m(1:6) over brick masonry, outside walls first floor |
| 27 | 12 mm thick cement plaster in c.m(1:6) over brick masonry, out side walls Second floor |
| 28 | 20mm thick cement plaster in C.M(1:4)as grading Plaster |
| 29 | Cement washing two coats over the plastered surface in ground floor |
| 30 | Cement washing two coats over the plastered surface in first floor |
| 31 | Cement washing two coats over the plastered surface in second floor |
| 32 | Finishing walls with withweather coat paint of approved shade two coatto give an even shade including cost of paint in first floor |
| 33 | Finishing walls with withweather coat paint of approved shade two coatto give an even shade including cost of paint in second floor |
| 34 | Fixing of Ceramic Glazed tiles in floors,treads or steps and landing on 25mm thick bed of cement mortar(1:1) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of tiles. |
| 35 | Fixing of glazed ceramic tilesin dado, skirting and risers of steps on 12mm thick cement plaster in mortar (1:3) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of tiles |
| 36 | Supply, fitting and fixing of MS grill and ventilators including painting two coats over a coat of primer including cost of transportation. |
| 37 | Priming one coat with any approved red oxide over steel work |
| 38 | Paining 2coats with any approved iron paint on new iron work. |
| 39 | Supplying fitting and fixing of FRP door frame of size 75X100mm including drilling holes in Masonry walls |
| 40 | Supplying fitting of Factory made single Leaf Regid FRP composite door Shutter of 32mm thick,Laminated with GRP skins with wood grain finished fabricates using UV stabilised Isopthalic Gel Coat and layer of 450gsm E-glass chopped strand mat(csm) impregnated with Orthopathalic,Polyster resin including fitting all fixtures like hings,towerbolt,handle,aldrop with cost,conveyance and taxes of all materials and labour complete |
| 41 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification |
| 42 | Supplying, fitting, fixing up window (sliding type) made up aluminum Section 151-154,151-155, as windows frame section No. 151-155, 151-153 and 151-167 as shutter framewith 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc.complete |
| 43 | Providing fitting, fixing of Al. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm plain glass in top portion with 12mm thick pre-laminated board in bottom portion fixed on door frame |
| 44 | Fitting tiles in floors,treads or steps and landing on 25mm thick bed of cement mortar(1:1) joined with neat cement slurry mixed with pig ments including cost of Vitrified tiles in Ground Floor |
| 45 | Fitting tiles in dadoes skirting and riser of steps on 12mm thickcement plaster(1:3) joined with neat cement slurry mixed with pigments to match the shade of tiles including rubbing &polishing complete including cost of Vitrified tiles |
| 46 | Fitting tiles in floors,treads or steps and landing on 25mm thick bed of cement mortar(1:1) joined with neat cement slurry mixed with pig ments including cost of Chequered tiles |
| 47 | Recessed wiring to Light point / Exhaust fan point with switch (Module) Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mmFR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non- metallic PVC flexible conduit with 5A 25 on MS box having front bakelite cover of suitable size, MS box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/HavellsN-Guard/ Great White/HPL) with all cost of material and labour etc. |
| 48 | Light Point / Exhaust Fan Point (Module)(Short) |
| 49 | Light Point / Exhaust Fan Point (Module)(Medium) |
| 50 | Light Point /Exhaust Fan Point (Module) (Long) |
| 51 | Medium point |
| 52 | Long point |
| 53 | Recessed wiring to Call bell point |
| 54 | Supply & Fixing of 5 Amps. Wall socket on existing Board (Module) |
| 55 | Supply & Fixing of 5 Amps. Wall socket with witch on Separate Board(Module) |
| 56 | Supply & Fixing of 15 Amps. Switch & Socket (Module) |
| 57 | Supplying & Fixing of T.V. Socket |
| 58 | Tele Vision wiring with Co-axial cable |
| 59 | Recessed wiring to Sub-main along with the following size of PVC insulated single core multistrand copper conducter ISI marked in 20 mm dia non metalic heavy duty flexible conduct 1.6 mm in Recessed PVC conduct as required (Make -Finolex/L&T/Anchor/Havels/V-Guard) |
| 60 | 2 x 2.5 sqmm + 1x1.5 sqmm run in 25 mm dia felxiable conduit |
| 61 | 2 x 4 sqmm + 1x 1.5 sqmm run in 25 mm dia felxiable conduit |
| 62 | 2 x 6 sqmm + 1 x 2.5 sqmm run in 25 mm dia felxiable conduit |
| 63 | 2 x10 sqmm + 1 x 4 sqmm run in 25 mm dia felxiable conduit |
| 64 | 4 x 10 sqmm + 2 x 4 sqmm run in 32 mm dia felxiable conduit |
| 65 | Supplying & Fixing of Angle Batten Holder / Batten Holder |
| 66 | Supplying fitting & fixing of 6 Way BDB with 6 MCB |
| 67 | 32 Amp. Double pole MCB |
| 68 | Supply and fixing M.S. Bracket made out of 50 x 5mm size flat 150cms long fixed horizontally on wall by grouting the same in space provided for electrical duct at an vertical distance 100 cms and having clearance of 50mm from wall surface laying pipe/wire G.I strips running earth complete with all accessories with all pants and primer. |
| 69 | Supply and fixing of junction box made of 1.22mm thick M.S. sheet and having provision of hanged door on front side and toptwo side is punched for running cable for individual flat with appropriate size fixed in theelectrical duct. |
| 70 | Supply of PVC armored cables ISI marked (Make- Glowstar / Polycab/ Nicco/ KEI/HPL/ Mescab) (50sqmm 3 1/2 core) |
| 71 | Supply, fabrication of Electrical Rotary Panel at individual Flat of size 16” x 8” x 5” with 1.22 mm thick with front hinged door with provision of D. O. rotary main switch & cutouts with one coat of red oxide and one coat of hammer paint, |
| 72 | Supplying & Fixing of Ceiling Rose |
| 73 | A.C Ceiling fan 48/56\" |
| 74 | Exhaust Fan / Wall Fan (10\"/12\" size) |
| 75 | Electronics step type Regulator |
| 76 | S/F of 15W LED light fitting (Make - Havells / Phillips/Bajaj) |
| 77 | Supply and fixing of A.C. Air terminals |
| 78 | Supply and fixing of standard earthing with 40mm diameter G.I. Pipe 3 meter long. 12mm diameter 15cm. holes 40mm diameter flange at top with R.C.C. earth pit chamber, masonary wall work, Alternate layer of charcoal and salt, complete with all accessories. (Earthing) |
| 79 | Extra copper flat for Earthing (25 x 6 mm) |
| 80 | Supply and fixing of 25 x 3mm size G.I. flat in both horizontal and vertical run from L.C. Air terminal at the building top to the earthing electrode in the ground G.I. flat will run along the wall surface and shall be fixed on the wall with the help of G.I. staples joints shall be made, with help of G.I. Nut and bolt. |
| 81 | Supplaying all materals,labours, taxes and tools and plants for fittings and fixing of PVCpipes,class- confirming to ASTM-D-1785/89(Sch-80) and pipe fittings of the following nominal bore with clamps fittings including making good the wall,ceilling and floor,testing all complite as per specification and direction of the Engineer -in-charge. |
| 82 | 25 mm dia PVC Pipe |
| 83 | 32 mm dia PVC Pipe |
| 84 | Cutting grooves in pucca floors and walls for taking CPVC pipe s and making good the damages as per specification and direction of the Engineer -in-charge. |
| 85 | Cutting holes through existing in R.C.C. Floors and roofs upto 19 cm.for taking CPVC pipe s and making good the damageswith cement voncrete(1:2:4) as per specification and direction of the Engineer -in-charge. |
| 86 | Supplying all materals,labours, taxes and tools and plants for fittings and fixing of brass screw-down Bib cock(Tapes)/CPittings of the following ISI approved make including supplay all nessary jointining material compliteas per specification and direction of the Engineer -in-charge. |
| 87 | 15 mm dia CP Brass Short Body Bib cock . |
| 88 | 15 mm dia CP Brass long body Bib cock . |
| 89 | 15 mm dia CP flanges |
| 90 | 15 mmdia CP Bib Cock (2 in 1) |
| 91 | Supplying all materals,labours, taxes and tools and plants for fittings and fixing of brass screw-down Stop cock / CPittings of the following IS:781-1995 approved make including supplay all nessary jointining material compliteas per specification and direction of the Engineer -in-charge. |
| 92 | 15 mm dia CP Brass Stop Cock |
| 93 | 15 mm dia CP Pillar Cock |
| 94 | Supplying, fitting, fixing of 15 mm dia CP concealed stopcocketc. Complete. |
| 95 | Supplying all materils,labour,T&P and fixing Rotational moulded polithylene cylindrical vertical water storage tanks(SYNTEX)conforming to IS 12701-1996 Including cutting holes through the tank and fixing mild steel tubes and fittings and providinng extra socket and jam nuts,fixing ball valave etc,including hoisting up to a heightofextra 5 Meters above ground level and placing the tank to the required positionetc, all as per speci fication and directionof the Engineer incharge. |
| 96 | 2000 liter capacity Syntex/FC Tank |
| 97 | Supplying, fitting, fixing of 15mmdia. PVC connection pipe for pillarcock, supply mains for wash basin etc. Complete. Supplying, fitting, fixing of 15mmdia. PVC connection pipe for pillarcock, supply mains for wash basin etc. Complete. |
| 98 | Supplying all materials,labour,T&P and fitting, fixining following PVC itemsand filling of the following outside diameter conformoring to IS 13592 Type A, to walls with seal ring conforming to IS:5382,leaving 10 mm gap for 10mm thermal expansion,(1) single socket pipes as per manufactures specification testing, all complite as per specificationand directionof the Engineer incharge. |
| 99 | 75 mm dia U-PVC Soil, Waste, Rainwater pipes |
| 100 | 75 mm dia UPVCdoor Tee |
| 101 | 75 mm dia UPVCdoor bend |
| 102 | 75 mm dia UPVCplain Tee |
| 103 | 75 mm dia UPVCCowl |
| 104 | 75 mm dia UPVCplain bend |
| 105 | 50 mm dia PVC plain bend |
| 106 | 50 mm dia UPVC pipe (4 kgf/cm 2 ) |
| 107 | 50 mm dia UPVCdoor bend |
| 108 | 50 mm dia UPVCplain bend |
| 109 | 75 mm x 50 mm dia UPVCR/Socket |
| 110 | 100 mm x 50 mm dia UPVCR/Socket |
| 111 | 110 mm dia UPVC pipe (4 kgf/cm 2 ) |
| 112 | 110 mm dia UPVCdoor Tee |
| 113 | 110 mm dia UPVCdoor bend |
| 114 | 110 mm dia UPVCplain Tee |
| 115 | 110 mm dia UPVCplain bend |
| 116 | 110 mm dia UPVCCowl |
| 117 | Supplying all materials,labour,T&P and fitting, fixining of white glazed vitreous china sqatting pan of size 580 mm x 440 mm size duly embedded in cement concrete (1:4:8) using hard granite metal 4 cm. nominal size and cement mortar (1:1),cutting the floor and mending good the damages etc,all complite as per specification and direction of the Engineer inchargr. |
| 118 | 580 mm x 440 size White glazed Virtious Odisha pattern squating pan Pan (Parry wire/Hindu stan make) |
| 119 | Supplying all materials,labour,T&P and fitting, fixining of Wash down water Closest (Europian type W.C pan) with Integral\"S\" or \"P\" trap conforming to IS 2556:Part 8-2004, to the floor with Wooden Plug And Chromium plated screws including jointingthe trap with soil pipe in cement mortar (1:1) etc,,all complite as per specification and direction of the Engineer inchargr.(Without Seat &Cover) |
| 120 | White Vitreous China EWC Pattern with \"P\" Trap |
| 121 | Supplying all materials,labour T &P Fitting of 10 liters capacity PVC L L flushing Cistern with manually controlled device(handle lever) conforming to IS :7231,etc all complite as per specification and direction of the Engineer incharge. |
| 122 | 10 Liters P.V.C.low level Flushing Cystern |
| 123 | Supplying all materials,labour T &P Fitting of Plastic Seatand cover for wash down water closet with cromium plated brass hinges and rubber buffer etc all complite as per specification and direction of the Engineer incharge. . |
| 124 | White Plastic Seat &cover with CP Brass Hinges |
| 125 | Supplying all materils,labour, T&P fitting,fixing of Long Bowl Pattern Urinal conforming to IS 2556: Part 6-1996 includingconnectiont the Urinalof Angle back 450x375x350 mm sizes respectvely with waste pipe by means of white cement(lead) mixed with chopped hemp etc ,as per specification and direction of the Engineer -in-charge |
| 126 | Virtious China -Angle Back Urinal of 450mm x 375 mmx 350 (Parryware/Hindustan) |
| 127 | Supplying all materils,labour, T&P fitting,fixing of glazed earthenware Ladies urinal (squating plate) of size 600 mm x 350 mm conforming to IS:2556-Part-6-1995 with integral longitudinal flushing pipe including embedding the plate 25mm cement morter (1:8) laid over 150mm cement concrete (1:4:8) using 40mm hard granite metal etc ,as per specification and direction of the Engineer -in-charge |
| 128 | Ladies urinal (Virtious china sqatting plate urinal) size 600mmx350 mm |
| 129 | Supplying all materils,labour, T&P fitting,fixing ofVirtious China flat Wash basin over sizes 550 mm x 400 mm with hole for pillar taps conformoing to IS 2556 : Part 4-2004 with cast iron or M.S Brackets painted white cement including cutting holes in walls and making good the damages etc. All complite as per specificationand direction of the Engineer-in-charge. |
| 130 | Virtious China flat wash basin of 550mm x400 mm(Parryware/Hindustan) |
| 131 | Supplying all materils,labour, T & P fitting,fixing ofPVC waste pipe for wash basin or sink i.e Flexiable (Coil shaped) PVC Waste pipe 40mm dia with length not less than 700 mm with PVC waste fittings etc. All complite as per specificationand direction of the Engineer-in-charge. |
| 132 | Flexible (coil shaped) PVC waste pipefor sink & wash basin 32 mm dia with 900 mm long waste fittings |
| 133 | Supplying all materils,labour, T&P fitting,fixing ofCP brass towel rail wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge. |
| 134 | 25 mm dia x 600 mm long. |
| 135 | Supplying all materils,labour, T&P fitting,fixing of bevelled type plate glass mirroor with wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge. |
| 136 | 600 mm x 450mm |
| 137 | Supplying all materils,labour, T&P fitting,fixing of Cp soap Holder standard sizewith wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge. |
| 138 | Supplaying all materals,labours, taxes and tools and plants for fittings and fixing of CP Brass Shower rose with CP revolving Shower with 15 to 20 mm inlet & 150 mm dia etc compliteas per specification and direction of the Engineer -in-charge. |
