Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-11-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 17-11-2022 |
| Sl. No. | Item Description |
| 1 | AGE B/R SCHEDULE PART - IExcavation in post holes not exiting 0.5 cum, getting out returing, filling in and ramming earth and broken hard core/rubble mixed with earth with around the layers not exiding 25 cm each layers watering and removing surplus soil to a distance not exceeding 50 cm making good complete in soft/ loose soil complete all as specified and as directed |
| 2 | M & Lfor Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed |
| 3 | M & Lfor 40 mm thick PCC 1:2:4 type B1(20 mm graded) as in subfloors finished even and rough without using extra cement complete all as specified and as directed. |
| 4 | M&L for preparation of new surfaces and applyingtwo coats of synthetic enamel paint on new steel surface exc 10 cm width or girth on 01 coat of primer (Red oxide Zinc chrome) complete all as specified and as directed |
| 5 | M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 6 | S&F pre painted galvatume aluminium zinc coating GI based plain steel sheet as in ridge of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and as directed. |
| 7 | S&F Mild steel in tubular trusses incl special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st-240 complete all as specified and as directed |
| 8 | M&L forcement concrete in surface channels and drains type C2 1:3:6 (40 mm graded aggregate ) complete all as specified and as directed. |
| 9 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc complete all as specified and as directed |
| 10 | Dismantling plain or corrugated steel sheeting , any guage, thickness incl nainital or similar pattern as in roof coverings complete all as specified and as directed |
| 11 | Dismantling boarding any description fixed in any position with nails complete all as specified and as directed |
| 12 | Dismantling Timber scantlings 40 sq cm and over in section in any position framed work complete all as specified and directed |
| 13 | Taking down chowkat or frame exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and as directed |
| 14 | Taking down chowkats or frames n. exc 1.50 Sqmeach with shutters (without taking off shutter from the frames) complete all as specified and as directed |
| 15 | Taking down shutters of any descriptionnexc 1.0 Sqm refixing in same opening complete all as specified and as directed |
| 16 | Taking down shutters of any descriptionexc 1.0 Sqm and nexc 2 sqm refixing in same openingcomplete all as specified and as directed |
| 17 | Taking down shutters of any description exc.1.0 Sqm and n.exc 2.0 sqm each complete all as directed |
| 18 | Taking down shutters of any description nexc.1.0 Sqm each complete all as directed |
| 19 | Demolition of Brickwork/solid concrete block work built in Cement mortar complete all as specified and as directed |
| 20 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 21 | Dismantling Wall and Ceiling Boards (Fibre ,Pulp,insulation ,etc)or insulation boards /slabs/blankets ,any thickness,including cover fillets complete all as specified and as directed |
| 22 | Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed |
| 23 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid in any mortar complete all as specified and as directed |
| 24 | Taking up or down steel tubing and disconnection, for 15mm bore of pipes complete all as specified and as directed |
| 25 | Taking up or down steel tubing and disconnection, for 20mm bore of pipescomplete all as specified and as directed |
| 26 | Excavation in foundation trenches n.exc 1.50m wide and n.exc 1.50m in depth and getting out in soft /loose soil complete all as specified and as directed |
| 27 | Returning, filling in, including, spreading, leveling, watering and well ramming in layers n.exc 25cm. complete all as specified and as directed |
| 28 | Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and as directed |
| 29 | M&L for PCC (1:4:8) type D-2using 40mm graded machine crushed stone aggregate as in foundation filling and mass concrete works complete all as specified and as directed |
| 30 | M&L for RCCnominal mix (1:1.5:3) (20 mm graded aggrgate)foundations, including raftfs, footings , plinth beams, bases for columns etc type complete all as specified and as directed |
| 31 | M&L for RCCnominal mix (1:1.5:3) (20 mm graded aggrgate) columns,pillars ,piers postsand similar works complete all as specified and as directed |
| 32 | M&L formild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns for columns, hooking ends and binding withand including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed |
| 33 | M&L formild steel TMT bars 5 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally in stirrups withand including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed |
| 34 | M&Lfor 75mm thick hard core of broken stone or boulders of guage not exc 63mm but n exc 40mm deposited spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surfacecomplete all as specified and as directed |
| 35 | M&L formwork to sides of plinth beams , foundations and other similar works complete all as specified and as directed. |
| 36 | M&L formwork to sides of pillars, posts,struts,pirs , coloumns and like complete all as specified and directed |
| 37 | M&Lfor wrought second class hard wood in scantlings unframed and fixed complete all as specified and directed |
| 38 | Fixing only for wrought second class hard wood in scantlings unframed and fixed complete all as specified and directed |
| 39 | M&L for preparation of wood and wood based materials, new or old of any description and girth not otherwise described and treated with creosote oil complete all as specified |
| 40 | M&L for providing and fixing stainless steel (Grade 304 ) railing made of hollow tubes, channels,plates etc, incl welding , grinding , buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete , including fixing the railing with necessary accessories & stainless steel dash fasteners, steel bolts etc of required size on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as diretced |
| 41 | S&F 2 mm thick fibre reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof , wall etc complete all as specified and as directed |
| 42 | S&F framed work as in doors or gates of angle or other section for fixing of sheets and similar works complete of Gde Fe-290(Gde E-165) all as specified and as directed |
| 43 | S&F 30 mm thk Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete all as specified and as directed |
| 44 | M &L for 35mm thick of 2nd class hard wood glazed skeleton hardwood shutters open rebatedand prepared to receive glass gauge etc (Without sash bars) , edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass etc complete all as specified and as directed |
| 45 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed |
| 46 | S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the fram at site as per specification and drawing complete all as specified and as directed |
| 47 | S&F solid PVC door frame of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification complete all as specified and as directed |
| 48 | S&F 15/16 mm thick pvc boardsfixed with screws to timber frame complete all as specified and as directed |
| 49 | S&F 12 mm thick pvc boardsfixed with screws to timber frame complete all as specified and as directed |
| 50 | S&F 0.90 mm thick pvc decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified |
| 51 | S&F brass 150 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed |
| 52 | S&F brass 100 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed |
| 53 | S&F extruded fancy type Brass handles fabricated type of size 150 mm complete all as specified and as directed |
| 54 | S&F extruded fancy type Brass handles fabricated type of size 100 mm complete all as specified and as directed |
| 55 | S&F butt hinges 100 mm extruded brass with mild steel hinge pin bright polsihed and fixed type B-11 complete all as specified and as directed |
| 56 | S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed |
| 57 | S&F extruded aluminium alloy handles fabricated type anodisedof size 150 mm complete all as specified and as directed |
| 58 | S&F butt hinges 100 mm medium weightmild steel cold rolled and fixed complete all as specified and as directed |
| 59 | S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed |
| 60 | S&F powder coated(powder coating min 50 micron)anodised door shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , handles 2 nos in each door , hinges , anodised aluminium snap beading screws etc complete all as specified |
| 61 | S&F powder coated(powder coating min 50 micron)anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no )complete all as specified and as directed |
| 62 | M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed. |
| 63 | M&L for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed. |
| 64 | M&L for Prelaminated particle board of 12 mm thk board ,interior grade ,prelaminated one side with decorative choice lamination & other side balancing , white lamination , fixed with screws to timber frame work complete all as specified and as directed |
| 65 | M&L forprecast cement concrete block massonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specified. |
| 66 | M&L forprecast cement concrete block massonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specified. |
| 67 | M & L for100mm thick PCC 1:3:6 type C2 as in subfloors finished even and rough without using extra cement complete all as specified and as directed. |
| 68 | M&L for 75 mm thick PCC (1:3:6 ) type C -2 as in Plinth protection finished even and smooth without using extra cement complete all as specified and as directed. |
| 69 | M&L for vitrified tiles lightshade (square /rectangular) polished area of each tiles exc 0.36 sqm but nexc 1.00 sqmin floors laid over and incl. 15 mm thk CM (1:6)screed bed jointed pointed with coloured cement to match the tiles complete all as specified and as directed |
| 70 | All as Per Item no here-in-above but in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:4 complete all as specified and as directed |
| 71 | M&L for non skid ceremic white tiles7 to 8mm thkarea of each tile exc 0.06 sqm but n exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bedin CM 1:6 complete all as specified and as directed |
| 72 | M & L for Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed. |
| 73 | M&L for vitrified pavic tiles darkshade (square /rectangular) polished area of each tiles not exc0.36 in floors laid over and incl. 20mm thk 1:6 screed bed jointed pointed with coloured cement to match the tile complete all as specified and as directed |
| 74 | M&L for 16/18 mm thk granite slab ( as in table top rubbed and polished) as in counter basin fixed in CM 1:4, pointing in white cement 1:2 using granite dust with admixture of pigment to match complete including dismantling the existing slab all as directed. |
| 75 | Labour only for chamfer , splays or arris in facework of Granite not exc 15mm wide complete all as specified and as directed |
| 76 | Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 77 | M&L for rendering15mm thick on fair faces of brick or concrete work in two layers with top 5 mm thick mixing with WPC @ 3% by weight of cement over a backing coat of 10mmin CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed Note-WPC shall be measured and paid seperately as supply only |
| 78 | Supply only Integral waterproofing compound |
| 79 | M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement compcomplete all as specified and as directedlete. |
| 80 | M&L for 10 mm thick 3D designer type PVC insulation panels with EPS stuck to 1mm with printed PVC sheet as per specifiecations and drawingcomplete |
| 81 | S&F GI frame work for seamless finishing comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 mm and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre /intermediate channel 0.9 mm thick having two equal falnges 15 mm each and web of 45 mm complete all as specified and directed |
| 82 | M&L for 10 mm thick 3D designer type PVC insulation panels with EPS stuck to 1mm with printed PVC sheetsuitably placed in false ceiling grid made of GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre /intermediate channel 0.90 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m ) of 0.55 mm thickness having kurled web of 50 mmand flange of 26 mm each with lips of 10.50 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with 4 mm dia GI adjusting level fixed to roof slabs complete all as specified and as directed |
| 83 | S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to mainT, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 4mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed . |
| 84 | M&L 4mm thick E Board 600x600 mmprepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-chargefixed or laid in ceiling timber /GI/ aluminiumframe work in ceiling flat or sloping complete all as per manufacturer instruction. |
| 85 | S&F in repairs 15mm boreBrass CP angular stop cock fancy type with Capstan heads complete all as specified and as directed of make Jaguar/Marc/Parryware |
| 86 | S&F in repairs Brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections incl necessary packing union and cap complete all as specified and as directed |
| 87 | S&F in repairs bevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commericial ply wood and fixed to wooden plugs with CP brass screw and cup washer complete all as specified and as directed |
| 88 | M&L 75mm dia PVC(SWR)floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed |
| 89 | M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and as directed |
| 90 | M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and as directed |
| 91 | S&F PVC (SWR) bends 110mm dia complete all as specified and as directed |
| 92 | S&F PVC (SWR) bends 75mm dia complete all as specified and as directed |
| 93 | S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed |
| 94 | S&F PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed. |
| 95 | Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed. |
| 96 | All as per Item NO 95above but for 20mm dia (Bore) complete all as specified and as directed |
| 97 | S&F cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and as directed |
| 98 | Supply hoisting and fixingrotational moulded HDPE water storage tank ,triplelayered ,ISI marked (cylendrical vertical type with closed top) of capacity 1000 ltrs in position incl float valvehigh pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed incl dismantling of tank all as specified and directed. |
| 99 | S&F 15mm bore gun-metal globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and as directed |
| 100 | S&F 20mm bore gun-metal globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and as directed |
| 101 | S&F 25mm bore gun-metal globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and as directed |
| 102 | M&L for preparation of new wall surfaces and applying two finishing coat of oil bound distempering over 1mm of wall care putty complete all as specified and as directed |
| 103 | M&L for preparation of new wall surfaces and applying two finishing coat of acrylic emulsion paint , anti fungal resistance, dirt resistance exterior paint of required shade including primer coatcomplete all as specified and as directed |
| 104 | M&L for Complete removal of existing wall treatment surface and applying two finishing coat of acrylic emulsion paint , anti fungal resistance , dirt resistance exterior paint of required shade including primer coat complete all as specified and as directed |
| 105 | M& L for Complete removal of existing treatment on old wall surfaces and applyingtwo finishing coat of oil bound distempering over 1mm of wall care putty complete all as specified and as directed. |
| 106 | S & F in repairs Vitreous China EWC including seat cover closed pattern single piece size 755x365x655 complete all as specified and as directed make Jaguar Cat Part No :- LYS-WHT-38851PSM or equivalent in make cera, parryware or Hindware |
| 107 | S&Fin repairs vitreous China clay table top WHB of make Jaguar Cat Part No:-ARS-WHT-39601 of size 635x430x190 mm incl waste coupling complete all as specified and as directedCat Part No:-ALD-727 complete or equivalent in Hindware/Cera/Parryware |
| 108 | S & F in repairs Towel rack 600mm long with lower hangers , stainless steel of complete all as specified and as directedmake Jaguar Cat Part No:-AKP-35781PS or equivalent in Marc/Parryware/Prayag |
| 109 | S&F in repair fancy type tall body with 155 mm extension body fixed spout without popup waste system with 600 mm long braided hoses of complete all as specified and as directedmake JaquarCat Part No:- KUP-35005BPM or equivalent in Marc/Parryware/Prayag |
| 110 | S&Fin repairs 15 mm bore CP health Foucet cock with Flexible pipe 1 m long of complete all as specified and as directed make Jaguar Cat Part No:ALD-565 or equivalent in Marc/Parryware/Prayag |
| 111 | S&F in repairs Soap dish holder of make complete all as specified and as directed Jaguar Cat Part No:-AKP-35731P or equivalent in Marc/Parryware/Prayag |
| 112 | S&Fin repairs Toilet roll holder with stainless steel flap of complete all as specified and as directed Make Jaguar Cat Part No:- AKP-35753PS OR EQUIVALENT IN Marc/Parryware/Prayag |
| 113 | S&Fin repairs Towel ring square shape stainless steel of complete all as specified and as directed Make Jaguar Cat Part No:-AKP-35721P or equivalent in Marc/Parryware/Prayag |
| 114 | S&F in repairsof Venetian blinds of wooden finished material width of 50 mm and thickness of 5 mm and size as per direction of Engr-in-charge |
| 115 | M&L for examing concrete by tapping with light hammer and marking of the loose concrete areas of structural elements in straight line geometrical forms , grooving the edges same with grinder upto 5-10 mm depth without damaging existing rebars, carefully removing unsound weak /loose concrete /cover & concrete around the rebars upto 10 mm depth by low impact high frequency hammer /chipper without damaging the sound concrete , daily cleaning and stacking of debris at prescribed location in polypropylene /paper bags ,disposing off the debris so generated on weekly basis outside the premises etc complete all as specified and as directed |
| 116 | M&L for making V groove of 10 mm wide and 30 mm deep or upto the extend of joint/crack present at site over joint/ crack line using electricity operated angle grinder with diamond concrete saw blade and cleaning it by air blower as directed by Engr-in-charge . The groove shall be cut on the concrete surface along the joint/crack overRCC structure to be repaired complete all as specified and directed .Note: Work to be executed by the authorised applicator of manufacture only complete all as specified and as directed. |
| 117 | M&L for sealing of exposed V groove of 10 mm wide and 30 mm deep with sikaguard 694 F(I) or quick fix or equivalent solvent-free moisture tolerant , thixotropic two part structural adhesive and repair mortar cum surface levelling mortar. Note : Work to be executed by the authorised applicator of manufactures only complete all as specified and as directed. |
| 118 | M&L for Drilling Holes of 12 mm dia upto 100 mm deep holes in structural members at the interval of 300 mm in staggered manner or along the joint & crack line in reinforced concrete (RCC) structural element including cleaning of the holes by air blower and inserting 12 mm dia NRV (Non return valve) nozzle compatible with epoxy injector and having machined external end to recieve outlet of grounting Gunfix inside the hole by applying thixotropic epoxy adhesive sikadur 31 or equivalent to ensure complete sealing and allow curing the system for minimum of 8 hrs before grounting including nozzle projections, excess putty if any over concrete element by grinding leveling and finishing theexternal surface after complete of thework etc complete all as specified and as directed |
| 119 | M&L for injection grouting of construction joints with non shrink cement slurry admixed with epoxy grounting cebex 100 of M/S fosroc chemical/sika grout -214 IN @ 300 mm c/c incl of opening of cracks to a groove of size 12x12 mm , nozzle at 300 mm c/c incl of opening of cracks to be grovved of size 10mm x 10 mm fixing of nozzles with fast setting pluggingcompound renderoc plug cutting the extra length of nozzle after grounting all in complete as per manufactures instructions incl necessary scaffolding as required and as per the directions of Engr-in-charge complete all as specified and directed , seal the nozzle with sikaguard 694 F(I) or equivalent thixotropic epoxy putty after the refusal of grout material from the nozzle .Note : leakage through other nozzle or cracks are required to be monitered while grouting and such points to be sealed as and when required without any extra cost. |
| 120 | M&L for cleaning existing reinforcement with wire brush/rotary wire brush to make surface free from rust scales , loose material, dirt etc complete and applying two coats of alkaline rust converting primer sika rustoff 100 or Rearm rust remover with brush on the existing rebar for complete wetting of rusted meatl surface and allowed to react it for 16-24 hrs , after 24 hrs a white layer will appear which will protect further corrosion of metal /steel for about 5-7 days incl surface preparation before applying protective coating the surface should be wire brushed and thoroughly cleaned for dust with dry cloth, complete all as specified and as directed by Engr-in-charge. Note: Work to be executed by the authorised applicator of manufacture only. |
| 121 | M&L for providing and application of Sika Frianzinc/Aqua arm coat-Zp as passivator/Anti corrosion coating to be steel reinforcement shall be applied the material shall be two component cement based polymer modified two component coating for corrosion protection.The material shall be prepared and ready to use it shall be fully compatible with the resistantement methods adopted complete all as specified and as directed br Engr-in-charge .This shall include surface preparation and erection of steel props as required for the application complete all as specified and as directed.Note: Work to be executed by the authorised applicator of manufacturer only. |
| 122 | M&L for two component solvent free epoxy bonding agent sika sikadur 32LP/Re arm superbond or equivalent for bonding old to new concrete.The ready to use epoxy bonding agent shall be applied over old using brush after cleaning of surface of all dust or latiance . The material is supplied as a two part material in preweighed quantities for ready onsite mixing and use .The material shall exibits the following properties comprehensive strength 50 N/sqmm at 7D flexural strength 35 N/sqmm at 7 D , shear strength 10 N/sqmm at 7 D and Tensile strength 20 N/sqmm and Bond strength of10 N/sqmm . The new concrete shall be placed within theopen time as specified by the manufacturer to ensure maximum bonding and application shall be as per manufacturer instruction complete all as specified by Engr-in-charge .Note: Work to be executed by the authorised applicator of manufacture only. |
| 123 | Rebuilding the section of damaged RCC elements to its original size in thickness of 25 mm by hand or spray application by providing and applying Sika Mono Top @-122F component fibre reinforced sulphate resistant low shrinkage high performance cementitious structural repair mortar complete all as specified and directed |
| 124 | M&L for provoding & applying of Sika Topseal 107 or Aqua arm top guard inside of the wall & floor of the tank , a two components ready to use polymer modified cementatious coating , the thickness of coating shall not be less than 1.5 mm complete all as specified and as directed. |
| 125 | M&Lfor applying two coats Sikaguard 67 or Aquaarm tank coat , a water based epoxy coating certified for portable water on all over the concrete surface from inside , the coating shall be usung roller brush application complete all as specified and diercted |
| 126 | M&L for complete removal of old painted /snowcem surface tank and applying one coat of primer and two coat of weather proof exterior emulsion paint of Asian paint apex or equivalent in Berger/Nerolac paints to concrete surface incl preparation of suraces and scaffolding work as required at sitecomplete all as specified and directed |
| 127 | S&F compound girders and stanchions,lattice girders ,aerial masts , staging for water tanks and the like incl caps, bases ,splices etc built up from two or more beam or channel sections or angles with plates including all lattice bars, stiffeners , gusset plates of Fe 290-W(Gde-E-165) etc complete all as specified and as directed |
| 128 | M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified. |
| 129 | M & L 100mm thick PCC 1:4:8 type D2 as in subfloors finished even and rough without using extra cement complete all as specified and as directed. |
| 130 | AGE E/M SCHEDULE PART -IITaking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified. |
| 131 | Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, in PVC Casing capping on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductorgreen colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitablesteel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer bothinternally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washersand making goodthe disturbed surfaces as per existingfor one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately . |
| 132 | Description all as per Srl item No.131 above but for socket outlet point 5 Amp on same board. |
| 133 | Description all as per Srl item No131 above but for socket outletpoint 5 Amp on Independent board. |
| 134 | Description all as per serial item No 131 above but with 4 sqmm cablefor 3 pin 15 Amps switch socket outlet (Power point) complete all as specified. |
| 135 | Supply and fix switch piano (ISI marked) Single pole 240 volts,5Amps all as specified and directed. Make- Havells/anchor/ Legrand. |
| 136 | Supply and fix socket(ISI marked) 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed. Make- Havells/anchor/ Legrand. |
| 137 | Supply and fix switch socket combination (ISI marked) 2/3 pin and 5/15 Amps, flush type, 240 volts complete all as specified and directed. Make- Havells/anchor/ Legrand. |
| 138 | Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. Make:Cona , Plaza, Anchor . |
| 139 | Supply and fixing LED batten fittings 1x18 Watt complete pre wired fixed to wallwith 2 nos PVC block of suitable size including taking down old unserviceable one complete all as specifed and as directed. |
| 140 | S & F wall mounted LED batten fittings with all accessories 1X 9 Watt LED / foot light6000K, extruded polycarbonate, integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size complete all as specified and as directed including taking down old unserviceable light fittings |
| 141 | S & F Exhaust fan 230 volts , 250mm, steel body heavy dutyincludingmaking all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall complete all as specifed and as directed. Make Bajaj/Havell\"s/CG. |
| 142 | M & L Sub main wiring with two runs ofsingle core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in PVC conduit, medium gradeISI markedwith all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion including taking down old wiring etc complete all as directed. Note: (i) Two runs of 6 sqmm and one run of6 sqmm cable and one run of PVC conduitshall be measured as one RM. (ii)Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted. |
| 143 | Supply and fix in repairs MCCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified.. (Note:MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule .Note:Copper thimble shall be used for connection of cable . |
| 144 | Supply and fix MCCB TPN, 240 Volts, 100 Amps, 10 kA rupturing capacity415 Voltscomplete all as specified and directed including taking down old one. |
| 145 | Supply and fixing Post top 45 watt for gate and landscape lighting with IP 65 Protection n to impact and corrosion, anti glare and uniform distribution complete all as specified and directed by Engr-in-Charge Make- Crompton cat no LPTOI-45-T /Havells / Phlips |
| 146 | Supply and fixing LED flood light 60 Watt, Green pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of lightcomplete all as specifed and as directed. |
| 147 | Supply and fix in repairLED Bollard Lights including connection with three core flexible copper cable complete all as specified and directed |
| 148 | Supply and fix MCB Distribution board , 240 volts single pole andneutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking downcomplete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S. |
| 149 | Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity \"C\" seriescomplete all as specified and directed including taking down old one. Make: Havells Cat part No - DHMCCDPF006-032 or equivalent in Schnieder/GE/C&S. |
| 150 | Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB\"s complete all as specifed and as directed. Make : Hageras per cat part- NCN106N, Schneider as per cat No : A9N4P32C or Indoasian as per cat No : 81195. |
| 151 | Supply lay/spread in trenches , river sand ,clean ,including spreading ,levelling ,punning for laying /cushioning of cables all as specified and as directed. |
| 152 | Supply lay in trenches fly ash bricks, old size sub class “B” for cable protection complete all as specifed and as directed. |
| 153 | Supply, lay in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable , 1100 volts grade, PVC/ XLPE insulated , with multistrandedaluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc, of size 16 Sq.mm 4 core , confirming to IS specifications complete all as specifed and as directed. |
| 154 | Supply and fix on pole / wall or lay in trenches under road / drain crossingsetc., for drawing cables, GI pipe light grade ,,ISI marked ,offollowing sizes including necessery pipe , fittings ,clamps, bolts , nuts etc complete all as specifed and as directed. |
| 155 | Supply and fixing Flexiable cable 6 Sqmm Weather proof single flat twin core cable including pvc pipe 20 mmcomplete all as specified and directed |
| 156 | Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways andone handle for lifting made out of 8 mm dia TMTbar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I complete all as specifed and as directed. |
| 157 | Supply and fixing modular switch 1 way 6A module 230/250 volt , AC supply,ISI Marked, with white cover plate with frame complete all as specified and directed. Make:Cona , Plaza, Anchor, Vinay |
| 158 | Supply and fixing modular sockets 6A 2/3 pin combined 2 module 230/250 Volts,50 Hz , AC supply, ISI Marked, with cover platecomplete all as specified and directed. |
| 159 | Supply and fixing LED security Buildinglight LED 25 Watt, pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of lightcomplete all as specifed and as directed. Make:- Bajaj Cat part No- 169821 LED/CG as perr vat No LSTO 25 CDLequivalent model as in Surya / havells . |
| 160 | M & L for repair of Single pointed air termination aluminium rod 12 mm dia 300mm long complete to walls/roof/pipes with suitable clamps of MS bolts and nuts etc required at site. Complete all as specified and as directed by Engineer-in-Charge. (MS work will be measured and paid separately). |
| 161 | M & L for repair galvanised iron strip 32x6mm earth continuity conductor or main earthing lead fixed to wall on batten or recess or chasesor buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required including 2mm dia galvanized iron or steel wire. Complete all as specified and directed by the Engineer-in-Charge. |
| 162 | S&F GI pipe of 50mm bore and fixied for wall incl clamps and accessories for connecting lightening arrestorComplete all as specified and directed by the Engineer-in-Charge. |
| 163 | M&L for repair insulator for each strip and fixed arrangement in roof/wall of building for run of strips on it with nuts and bolts.Complete all as specified and directed by the Engineer-in-Charge |
| 164 | M&L for Test Point terminal block made of gunmetal or phosphorus bronze size 75X75X25mm drilled and screwed including 03 Nos 8 mm dia long hex head screw complete all as specified and directed by Engineer-in-Charge. |
| 165 | S&F cross arms bracing supports clamps and back plates fabricated from structural steel section including nut, bolts, washers, welded, binding, cold as hot drilling holes for bolts in any shape or size as required painted with two coats of aluminium paint over a coat of red oxide primer after preparation of surface. Complete all as specified and directed by the Engineer-in-Charge. |
| 166 | M & L for in replacement of Aviation obstruction light with twin 100w GLS in over head tanks / Bldg / high mast/Saft pans are as following : (a)Luminaries body :Aviation yellow colored die-cast aluminum alloy housing for one nos 100watt GLS Lamps, (b) Enclosure :Red colored poly carbonate done secured to housing by 3 Nos screw, (c)Mounting arrangement : 38 mm dia threaded item with lock nets for mounting on pipe above structure , (d)Degree of protection : IP43 ,Make : Bajaj/ Havells / CG |
| 167 | M & L replacement of serviceable 2 core aluminum conductor of Size 2.5 Sqmm for obstruction light in over head tank/Blast pans all as specified and directed by Engineer-in-Charge. |
| 168 | Supply and fix MCCB TPN, 240 Volts, 100 Amps, 10 kA rupturing capacity415 Voltscomplete all as specified and directed including taking down old one complete all as specifed and as directed. |
| 169 | Supply and fix on pole / wall or lay in trenches under road / drain crossingsetc., for drawing cables, GI pipe light grade ,,ISI marked ,offollowing sizes including necessery pipe , fittings ,clamps, bolts , nuts etc complete all as specifed and as directed. |
| 170 | Supply and fixing Flexible cable 6 Sqmm Weather proof single flat twin core cable including pvc pipe 20 mmcomplete all as specified and directed |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
