|
| 1 | Civil Works. |
| 2 | Cement Concrete with2 cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. Required for proper completion of the work.(4.1.3) |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand). 6.1.2 |
| 4 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) (Item No. 13.4.2 |
| 5 | Distempring ( First Coat) with oil bound distemper of approved brand and manufacture and of required shade on undercoarted wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J & N, Shalimar, Asian Paint afetr thoroughly brushing the surface free from morter droppintg and other foreign matters and also including the surface even with the plaster of paris or approved synthetic materials and sand papered smooth including supply of all material, labour, T & P etc, required for proper completion of the work. S.O.R.-650,651,649 (50+19+24=93.00) |
| 6 | Painting or varnishing work in small areas or new wood work with one coat ( upto one sqare meter of ready mixed priming paint and one coat of approved suprrior quality ready mixed paint or varnish including supply of all material, labour T & P etc required for proper completion of the work, paint to be used ISI marked.S.O.R 641,642 58+26=84.00 |
| 7 | Providing and Applying with cement based putty of avergethicknes 1 mm, opproved brand and manufacture, over the plastered the surface smooth including necessary. Repair to scratcehes etc. Complete.S.O.R- 662 |
| 8 | Removing dry or oil bound distemper, water proofing cement paintand the like by scrapping, sand papering and preparing the surfacesmooth including necessary repairs to scratches etc. complete. AOR 13.91 |
| 9 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.AOR 15.56 |
| 10 | Supply and fixing of 3.8cm (11/2\") thick country wood door fully panelled shutters including supply and fixing of wooden cleats stops and including fixing & adjustment of hinges, bolts, locks handles,spring and of other fittings but excluding their supply and including painting with two coat of black japan on all iron fitting if necessary. |
| 11 | Cement concrete flooring 1:2:4 40mm thick with 20mm nominal size stone aggregate LSOR-11-3-1 |
| 12 | White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers. 17.7.8 |
| 13 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: Whiteitreous chinarissa pattern W.C. pan of size 580x440 mm with integral type foot restsAOR-17.1.1 |
| 14 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittingswith one step CPVC solvent cement, trenching, refilling & testing ofjoints complete as per direction of Engineer in Charge.15 mm nominal outer dia Pipes LSOR-18.9.1 |
| 15 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.25 mm nominal outer dia PipesLSOR-18.9.3 |
| 16 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore (AOR 18.15.1 |
| 17 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore.AOR18.17.1 |
| 18 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. AOR18.48 |
| 19 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area clearedLSOR 2.31 |
| 20 | Renewing glass panes and replasing existing wooden fillets float glass panes of nominel thickness 5 mm (wait not less then 1250 KG per Sqm) AOR 14.7.21 |
| 21 | Provinding and fixing PTMT bottle trap for wash basin and sink bottle trap 31 mm single piece moulded with height of 270 mm effective length of tail pipe 260 mm from the center of the waste coupling 77 mm breadth with 25 mm minimum water seal weighing not less them 260 gms. |
| 22 | Providing and fixing PTMT grating of approved quality and colour. 100mm nominal dia.18.58.1.1 |
| 23 | Providing and fixing uplasticised PVC connection pipe with brassunions :15 mm nominal bore18.21.2.1 |
| 24 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32 mm dia AOR17.28.1.1 |
| 25 | Providing and fixing P.V.C. low level flushing cistern with manuallycontrolled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White AOR 17.18.1 |
| 26 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washerscomplete.AOR 17.31 |
| 27 | Providing and fixing soil, waste and vent pipes :Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989.AOR17.35.1.2 |
| 28 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore . AOR18.52.1 |
| 29 | Regrading terracing of mud phaska covered with tiles or brick, in cement mortar by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3fine sand), including replacing unserviceable tiles or bricks with new ones and disposal ofnserviceable material to the dumping ground (the cost of the new tiles or brick excluded), all complete as per direction of Engineer-in-ChargeAOR 14.13.1 |
| 30 | Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. AOR 14.17 |
| 31 | Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska : With F.P.S. brick tiles AOR 14.18.1 |
| 32 | Demolishing brick work manually/ by mechanical means including stacking of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar. AOR (15.7.4) |
| 33 | Earth work iin Cutting or in embankement in ordainary soil excavation to be in the from of regular pits not exceeding 0.50 m in depth and earth work in embankment to be in 20 cm. layers including remming and dressing the surface to required lavels and diopes and also including 1.50 M lift and 30 M. lead the earth from cutting to be used in macking embankement or to be deposited as spoil banks with-in 30 M distance as directed by the Engineer incharge excluding Royality etc. |
| 34 | Kota stone slab flooring over 25 mm thick bed of cementmortar (1:4)LSOR 11.26 |
| 35 | M.S.Gtills/Stair/Tusher/Racks etc. or iron work of small area nd section such as holding down bolts, hold fast, tie rods grating etc. and their fixing required from including supply of steel bots, bust wastage etc. and three fixing required for proper completion of work. |
| 36 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 300x16 mm.LAOR-9.96.1 |
| 37 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. Complete 300x10 mm.9.97.3 |
| 38 | Providing and fixing chromium plated brass handles with necessary screws etc.complete: 125 mmAOR 9.92.1 |
| 39 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever requiredW.C. pan with ISI marked white solid plastic seat and lid AOR 17.2.1 |
| 40 | Providing and fixing of 40mm dia nominal bore G.I. Pipes complete with G.I. fittings including refilling etc. |
| 41 | making connection of G.I. distribution branch with G.I. main of 25 to 40 mm nominal bore by providing and fixing tee, including cutting and treading the pipe etc. complete. |
| 42 | Providing and fixing G.I. union I n G.I. Pipe 15 mm nominal bore including cutting and thredading the pipeand makinh long screws etc. complete (new work) |
| 43 | Providing and fixing 25mm nominal bore G.I. Union in existing G.I. Pipe line cutting and threading the pipe and makinh long screws, including excavation, refilling the earth of cutting of wall and making good th same complete whereever required. |
| 44 | Providing and fixing 40mm nominal bore G.I. Union in existing G.I. Pipe line cutting and threading the pipe and makinh long screws, including excavation, refilling the earth of cutting of wall and making good th same complete whereever required. |
| 45 | Providing and fixing C.P. Brass extension nipple (sze 15 mm X50mm) of approved make and quality as per direction of Engineer-in charge. |
| 46 | Providing and fixing of C.P. brass long bib cock 15 mm nominal bore of approved quality conforming to IS standards and weighing not lett than 690 gms. |
| 47 | Providing and fixing uplastricised PVC connection pipe with brass union: 15mm nominal bore. AOR 18.21.2.1 |
| 48 | Cutting holes up to 15x15 cm in R.C.C. floor and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proofLSOR18.77 |
| 49 | Making chases up to 7.5X7.5 in wal including making good and finishing with matching surface after housing G.I. Pipe edt. |
| 50 | Providing and fixing wash basin with C.I. brackets 15 mm dia CP brass single hole basing mixer of approved quality and make including painting of fittings and brackets cutting and making good thw wall wherever as required. |
| 51 | Providing and fixing plain bend of required degree. Sand cast iron S&S as per IS : 3989 AOR17.39.1.2 |
| 52 | Providing and fixingdouble action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315 with stainless steel cover plate minimum 1.25 mm thickness having brand logo embossed on the body/ plate with double spring mechanism and dooor weight up to 1.25 kg. for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per direction of Engineer-in-charge. |
| 53 | Providing and Fixing in position collapsible steel shutters with vertical channels 20 x10x2 mm and braced with flat iron diagonals 20 x5 mm size, with top and bottom rail of T-iron 40 x40x6 mm, with 40 mm dia seel pulleys, complete with bolts, nuts, locking arrangement, stopper, handles, including applying a priming coat of approved steel primer |
| 54 | For Shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing offittings whereever required including the cost EPDM rubber/ neoprene gasket required ( fittings shall be paid for separately)Anodised aluminium ( anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 55 | Providing and fixing plain bend of required degree. Sand cast iron S&S as per IS : 3989AOR17.39.1.2 |
| 56 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of 100 mm diameter |
| 57 | Providing and fixing chromium plated brass handles with necessary screws etc.complete: 125 mm AOR9.92.1 |
| 58 | Providing and fixing M.S.holder-bat clamps of approved design toand Cast iron/cast (spun) pipe bedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix ( 1 cement :2 coars sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc.For 100 mm dia pipe |
| 59 | Providing and fixing single unequal invert branch of required digree :For 100x100x75x75 mm Sand Cost Iron S& S as per I.S. 1729 |
| 60 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper AOR 9.101.2 |
| 61 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore:AOR18.18.2 |
| 62 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.LSOR9.21.1 |
| 63 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as perstandard design: With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.LSOR19.4.2.1 |
| 64 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Square shape 450 mm internal dimensionsLSOR19.19.1.2 |
| 65 | Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg.LSOR19.20 |
| 66 | Washed stone grit plaster on exterior walls in two layers under layer 12mm cement plaster (1:4), top layer 15mm cement plaster 1:1/2:2.AOR13.72 |
| 67 | Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge :15 mm wide and 15 mm deep groove .AOR13.73.1 |
| 68 | Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m.All kinds of soil .AOR2.30.1 |
| 69 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates.and similar works.AOR10.25.2 |
| 70 | Providing and laying vitrified floor tiles in different sizes (thickness to be ecified by the manufacturer) with water rption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of tile 500x500mm AOR 11.41.1 |
| 71 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.AOR8.31 |
