|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: as directed by Engineer-in-charge. |
| 2 | ORDINARY ROCK 20% |
| 3 | ALL KINDS OF SOIL 80% |
| 4 | Filling available excavated earth (excluding rock) in trenches plinth, sides of foundation etc in layer not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50cm and lead up to 50 m and lift upto 1.5 mtr. |
| 5 | STONE SOLLING Dumping of stone including cost of stone (inhorizontal on level) |
| 6 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size) (crushed)including carriage from 12 km . |
| 7 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (crushed) including carriage. |
| 8 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.complete.50 mm thick with 20mm nominal size stone aggregate. Including all sort of carriage complete. |
| 9 | Reinforced cement concrete work in Footing , Pedestal ,Columns , beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement withM20 (1:1.5:3) (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). Including all sort of carriage complete. |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundation, footing bases of column |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts. |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform. |
| 15 | Edge of slab |
| 16 | Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size). Including all sort of carriage complete. |
| 17 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for seperately) First class teak wood |
| 18 | Providing and fixing panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for seperately,all complete as per direction of Engineer-in-charge.(second class teak wood35 mm thick shutter) |
| 19 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick.Second Class teak wood |
| 20 | Providing and Fixing 5.0 mm thick glass pane (weighing not less than 12.50 kg/sqm) Including bedding, nails all necessary fixture Complete. |
| 21 | Pebble dash plaster upto 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 Coarse sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement.. Including all sort of carriage complete. |
| 22 | CEMENT PLASTER (IN COARSE SAND) 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 coarse sand) (PPC or cement with >25% flyash is recommended.). Including all sort of carriage complete. |
| 23 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 24 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer (Note: It Should have Low or No VOC as per Green Building guidelines) |
| 25 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm |
| 26 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)(Note: It Should have Low or No VOC as per Green Building guidelines) |
| 27 | Preparing newly primed wooden surface for painting by way of filling of putty, varnishing sand papering rubbing complete. |
| 28 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 29 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm ( Kajaria/Somany/Cera or Any approved Brand as per Engineer In charge) |
| 30 | Marble work gang saw cut (polished and machine cut) of thickness 16 mm for wall lining (veneer work), backing filled with a grout of 12 mm thick average in cement mortar 1:3 (1 cement: 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). Raj Nagar plain white marble/Udaipur green marble/zebra black marble |
| 31 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size asapproved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. |
| 32 | Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 4/2 litre low level P.V. C. flushing cistern including flush pipe (of approved make) \"manually controled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. (Note : It should have flush rate of with Flush rate of 4/2 Litre per Flush or less ) (Dual flush 4/2L WC cistern with bottom inlet for compact back to wall Rimless toilet) |
| 33 | Providing and fixing white vitreous china pedestal type water closet EWC (European type W.C . .pan) with seat and lid, 4/2 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied: (Note : It should have flush rate of with Flush rate of 4/2 Litre per Flush or less ) |
| 34 | Providing and fixing White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps JAGUAR / CERA/HINDWARE Make |
| 35 | P/F of mirrors of superior glass with plastic moulded frame(of approved quality) and of required size and shape. With 6mm thick hard board backing. Rectangular Shape 1500 x 450 mm |
| 36 | P/F Stainless steel 304 Grade Square Shaped Sink Vessel Sink (21 X 18 X 8) inches (Steel) of approved brand and manufacture Hindware/Jaguare/Imperio/ Kaff and any other approved brand as per Engineer Incharge |
| 37 | Providing and fixing soil waste & vent pipe |
| 38 | PVC Pipe. 110mm dia (10 feet unit Length) |
| 39 | PVC Pipe. 75mm dia (10 feet unit Length) |
| 40 | Providing and fixing 3 layer Thermex Pipe PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801,including all nessesary fixtures and joints . |
| 41 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 42 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 43 | PN-16 pipe , 50mm OD(SDR-7.4) |
| 44 | P/F CP brass toilet paper holder including cost of wodden,PVC,play etc. |
| 45 | Providing and fixing accessories of standard and quality make of approved manufacturer including all necessary fixtures required. |
| 46 | AL-Drops for room door |
| 47 | T- Bolt for doors 6\" |
| 48 | T- Bolt for Windows 4\" |
| 49 | Handles for door |
| 50 | Handels for window |
| 51 | 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 52 | 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms |
| 53 | C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge. |
| 54 | Providing and fixing Stainless steel SS-304 Grade L Shaped 90° Wall Mounted Grab barsNear EWC (European Water Closet) of approved brand for Disable-friendly Bathroom/Toilets as per standard and specification. |
| 55 | 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 56 | Providing and fixing self regulating heating cable insulation for ppr pipes including all necessary fixtures like thermostate, aluminium foil sheet for exposed portions nertile insulation etc and cable connections complete as per the direction of engineer incharge. |
| 57 | 25 mm dia ppr pipe |
| 58 | 32 mm dia ppr pipe |
| 59 | 50 mm dia ppr pipe |
| 60 | Providing and installation ofwater tank capacity 1000 ltrs of approved brand (SYNTEX OR ANY OTHER APPROVED BRAND) including all necessary fixtures as per direction engineer incharge |
| 61 | Providing and installation ofPUFinsulation of water tank capacity 1000 ltrs of approved brand (SYNTEX OR ANY OTHER APPROVED BRAND) as per direction engineer incharge |
| 62 | Providing and fixing of 1.5 HP motor for lifting water. Including all necessary fixtures . |
| 63 | P/F of local Tukul pakchey all complete. |
| 64 | High water pressure S.S geyser connection pipe (2 feet long)of approved quality and make, |
| 65 | 15 mm C.P. brass ABS Health FaucetJet Spray with Hose and Holder of approved quality conforming to IS standards (KOHLER/JAGUAR/CERA) |
| 66 | Supply installation testing and commissioning of Instant Geyser 15ltr Capacity of approved brand (Havells/Bajaj/Crompton or any othet approved brand as per engineer in charge including all fixtures , bolts all complete |
| 67 | Design Supply and installation/Fixing staircase railling ofstainless steel (Grade 304) railing(Top Handrail Dia> 50mm , two number intermediate Horizontal tubes Dia>25mm and Rectangular Two Pair Balusters Dia >38mm @1000mm C/C) made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) including fixing the railing with necessary accessories , newal post , balusters and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, necessary screws/fixtures complete jobas approved by engineer incharge (Note : No additional payment shall be made to master pillar/Newal Post ) |
| 68 | THERMAL INSULATION |
| 69 | Providing wood work in frames ofwalls,false ceiling, partitions etc. sawn and fixed in position :Budloo / Fir wood (Note : False Celling Design should be as perengineer in charge which may be of different level celling) |
| 70 | Providing and fixing 12 mm thick tongued and grooved Pine wood(Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celingincludining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 71 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete. First class Budloo/Fir wood |
| 72 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side ofthe sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 73 | P/F of ridges and hips including all fixtures |
| 74 | Providing and fixing plained eaves boarding |
| 75 | Providing and fixing of Base plate , joint plate, u clip and necessary nutbolts etc complete |
| 76 | Providing and fixing plained eaves boarding |
