|
| 1 | Taking down chowkats or frames with shutter w/o taking off shutter from the frame exc 1.5 sqm & n. exe 4 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed. |
| 2 | Taking down wooden shutter exc 1.00 Sqm but not exc 2.00 each and removing to store ,complete all as specified and directed. |
| 3 | Dismantling wrought Iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 4 | S&F framed work such as grills, grating, etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed baluster; walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 5 | S&F roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe-410-W (Gde-E-250) quality-A complete all as specified and directed. |
| 6 | S&F pressed steel frames, size 105 x 60mm, (minimum wt. of steel section should be 1.90 kg/M) for doors and window with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specified and directed. |
| 7 | S&F pressed steel frames, size 125 x 60mm, (minimum wt. of steel section should be 1.90 kg/M) for doors and window with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specified and directed. |
| 8 | Demolition of cement concrete(unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or aboveground level) complete all as specified and as directed. |
| 9 | M&L for PCC(1:2:4) type B-1 (using 20mm graded stone aggregate) as in roof kerbs or mud stop rounded chamfered on edges complete all as specified and directed. |
| 10 | M&L for 75mm thickPCC(1:3:6), type C-2, (using 40 mm graded stone aggregate) as in plinth protection and finished the surface even and smooth without using extra cement,complete all as specified and directed. |
| 11 | M&L forplain cement concrete (1:2:4), type B-1( using 20mm graded crushed stone aggregate ) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified and directed. |
| 12 | Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 25 mm dia bore ,complete all as specified and directed. |
| 13 | S&F Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipewith bore of pipe 25 mm dia..complete all as specified and directed. |
| 14 | Supply and fix gi tubing 15mm dia \"medium grade\" connection from existing pipe line to geyser on wall including tee, bend, reducer, fittings and fixture as per site requirment complete all as specified and directed . |
| 15 | S&F factory made solid PVC door frame of size 50mmx47mm made out of 5 mm plain colour PVC sheet with mild steel square tube complete as per manufacturer specification & drawing complete all as specified and directed. |
| 16 | S&F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of mild steel tubes for top & bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC \"C\" channel havinga PVC sheet strip of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and botttom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement fixing in the frame at site as per specification ,drawing completeall as specified and directed . |
| 17 | S&F 30mm thick flush shutters, solid core construction, with MDF board with one face is covered with decorative face veneer with lipping/frame to match all as specified and directed by Engr-in-Charge. |
| 18 | S&F 35 mm thick plain framed, factory made panelled shutter (second class hard wood rails & styles) (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 19 | S&F factory made Glazed and skeleton shutters, 35 mm thick second class hardwood, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.complete all as specified and directed. |
| 20 | Supply and fix Steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded,including making good disturbed surfaces as per existing specfication complete all as specified and directed. complete all as specified and directed. |
| 21 | Supply and fix Steel windows with side hung shutters(minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded,including making good disturbed surfaces as per existing specfication complete all as specified and directed. complete all as specified and directed. |
| 22 | Supply and Fix,steel ventilator with top hung shutter (minimum wt. of steel section should be 1.42 kg/M) including hinges, steel peg stay, complete without glazing bars, dovetailed or welded, including making good disturbed surfaces as per existing specfication complete all as specified and directed. |
| 23 | S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 24 | S&F 3mm thick plain sheet glass, ordinary quality fixed with aluminium frame work n. exc 0.5 sqm in each pane.complete all as specified and directed. |
| 25 | S&F 3mm thick figured sheet glass, ordinary quality fixed with aluminium frame works n. exc 0.5 sqm in each pane.complete all as specified and directed. |
| 26 | Material and Labour for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel and iron surfaceexceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed. |
| 27 | M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 28 | S&F 300 mm aluminium alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium ally fixed.complete all as specified and directed. |
| 29 | S&F 100 mm butt hinges medium weight cold rolled mild steel complete all as specified and directed. |
| 30 | S&F aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified and directed. |
| 31 | S&F aluminium, anodized barrel tower bolts of extruded section and fixed, 150 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified and directed. |
| 32 | S&F300mm ordinary mild steel rat tail rod pattern springs including roller and roller plate etccomplete all as specified and directed. |
| 33 | S&F in repair 12mm thick prelaminated particle board, exterior grade prilaminated one side with decorative choice lamination & other side balancing white lamination , for cupboard, shelf etc fixed with scres, adhesive etc complete all as specified and direced. |
| 34 | S&F hasp and staple aluminium anodised 100mm safety type brass with mild steel hinge pin including bolt to hinge plate and fixed with screw, complete all as specified and as directed. |
| 35 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing to low lying area and rubbish off the premises.complete all as specified and as directed. |
| 36 | M&L for non-skid ceramic,straight cut/joint free, 7-8 mm thick colored tiles, area of each tile exceeding 0.11 Sq.m but not exceeding 0.18 Sq.m, in floorsetc. over andincluding 15 mm thick cement mortar (1:6) screed, set and jointed with grey cement slurry & pointed with grout of matching shade, , complete all as specified and directed.Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE. |
| 37 | M&L for glazedceramic coloured tiles in vertical surfaces of size 350x250x7mm/450x350x7mm thick quality not less than group II, straight edge, k, as on skirting , dados, walls etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 10mm thick backing coat in cement mortar (1:4),complete all as specified and directed.Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE |
| 38 | M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm , in skirting /dado etc. set and jointed in neat cement slurry and pointed in white or colouredover and including 10mm thick backing coat in cement mortar (1:4),complete all as specified and directed.Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE |
| 39 | Taking down cement plaster on brick/concrete surfaces incl raking out joints, hacking for key scrubbing down with water ,complete all as specified and directed. |
| 40 | M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.complete all as specified and as directed. |
| 41 | M&L for 15 mm thick rendering in cement mortar (1:4)mixed with water proofing compound @ 3% by wt. of cement in top layer as per manufacturer\"s instructions finished even and smooth without using extra cement complete all as specified and as directed. (Note : Integral water proofing compund shall be measured and paid separtely). |
| 42 | Supply only Integralwater proofing compound. |
| 43 | M&L for prepration of new plastered surfaces ofwall applying two coat of oil emulsion distemper over 3 mm thkwall care putty to obtained smoothness of plastered surfaces complete all as specified and directed. |
| 44 | M&L for prepration of newly plastered surface andappplying two coatsof exterier acrylic paint (wheather coats) over 1mm thick wall care putty etc complete all as specified and directed. |
| 45 | Complete removal of existing treatment and appplying two coatsof exterier acrylic paint (wheather coats) over 1 mm thick wall care putty to obtained smoothness of plastered surfaces complete all as specified and directed. |
| 46 | Complete removal of existing traetment of wall and treated with 3mm of wall care putty and applying two coat of oil bound distemper.complete all as specified and directed. |
| 47 | S&F Non asbestos fiber cement building boards 4mm thick fixed with screws in ceiling toGI grid frame work for false ceiling Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flangesof 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clipsacross the intermediate channel at 457 mm centre to centre. with taking down of existing including complete fixing arrragement and applying two coats of Oil bound distmper over a coat of wall care putty to obtained smoothness of surface completeall as specified and as directed by Engineer-in-charge. |
| 48 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, flat or curved incl ridges hips valleys as in roof coverings complete all as specified and directed. |
| 49 | Dismantling of asbestos cement (corrugated, semi corrugated etc) of any thickness incl ridges hips valleys as in roof coverings complete all as specified and directed. |
| 50 | S&F pre-painted, galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws, complete all as specified and directed. |
| 51 | S&F pre-painted galvanized aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 52 | S&F in repair stop valves, cast copper alloy , fancy type, chromium plated, screwed down, high pressure with long shank and cup (concealed type), screwed both ends for steel pipe of for unions, 15 mm bore, complete all as specified and directed. |
| 53 | S&Fin repair 15 mm bib tap,fancy type chromium plated with crutch or butterfly handle, screwed down, long body with flange ,screwed for iron pipe or for brass ferrule, complete all as specified and directed |
| 54 | S&F 15 mm bib tap,fancy type chromium plated with crutch or butterfly handle, screwed down, long body with flange ,screwed for iron pipe or for brass ferrule, complete all as specified and directed |
| 55 | S&F angle stop valves 15mm dia, cast chromium plated, screwed down, high pressure, screwed both ends for iron pipe and fixed, chromium plated with long shank and cup (concealed type),complete all as specified and directed. |
| 56 | S&F15 mm bore pillar taps, cast copper alloy, withcapstan heads,chromium plated,screwed down highpressure, with or without lettered \"Hot\" or \"Cold\" withlong screwed shanks and fly-nuts,screwed for iron pipe and fixed,fancy type suitable for 15 mm bore pipe, complete all as specified and as directed. |
| 57 | S&F in repair vitreous china Wash down water closet (Padestal pattern) white with P or S trap includingplastic water closet seat & cover mild steel chromium plated or aluminised hinging device (excluding cost of flush tank) complete all as specified and directed. |
| 58 | S&Fin repairs water closet (squatting pattern) vitreous china squatting panOrissa pattern, size 580 x 440mm, white, with integral footrest, excluding flushing cistern & flush pipe fixed as in repair with ‘P’ or ‘S’ trap, with connection to trap and anti syphon pipe etc,including making good the disturbed surfaces and to match with existing surface complete all as specified and directed. |
| 59 | S&F in repair 10 litre capacity PVC valveless, syphonic action type low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe and brackets complete all as specified and directed |
| 60 | S&F in repair wash basins, vitreous china, white, flat back, size 550 mm X 400 mm with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes,pvc waste pipes, waste fittings etc. with silicone sealant complete all as specified and as directed. |
| 61 | M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigmentto match the shade of granite stone including grinding and polishing as in floor over 15mm thick screed bed in cement mortar (1:4).complete all as specified and directed. |
| 62 | S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm,complete all as specified and as directed. |
| 63 | S&F in repair 15mm brass chromium plated shower rose with without swivel joints, 125mm size including fixing to steel pipe or union,complete all as specified and directed. |
| 64 | S&F PVC connection 15mm size with PTMT nuts,600mm length.complete all as specified and directed. |
| 65 | S&F in repair tubular towel rail brass chromium plated 20mm dia, \"D\" type, 60cm long between flanges and including brackets complete all as specified and directed. |
| 66 | S&F cast iron floor trap 75 mm dia outlet , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4),complete all as specified and directed. |
| 67 | S&F PVC (SWR) pipes of 75 mm dia single socketed in any length with rubber ring joints fixed to walls, including with clamps etc, complete and jointed complete all as specified and directed. |
| 68 | S&F PVC (SWR) bends any radius of 75mm bore with rubber ring joints fixed to wall and jointed ,complete all as specified and directed. |
| 69 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressedstonework and precast concrete articles,complete all as specified and directed. |
| 70 | M&L for brickwork with subclass `B\" bricks old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), complete all as specified and directed |
| 71 | M&L for Providing and laying 60mm thick factory madechamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick pacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand set and jointed in CM (1:4) with grey cement and pigment complete all as specified and as directed. |
| 72 | S&F in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleatsMinimum weight 300gms).complete all as specified and directed. |
| 73 | S&F in repair harrison rails mild steel, chromiumplated with fixing brackets, stops,rollers etc complete all as specified and directed. |
| 74 | Dimantling of wall and ceiling boards (fibre, pulp, insulation boards etc) orinsulation boards/slabs/ blankets,any thickness including cover fillets,complete all as specified and directed. |
| 75 | S&F 6mm thick nonasbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws as in ceiling ,complete all as specified and as directed. |
| 76 | Demolition of concrete(reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 77 | M&L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 78 | Supply and fix mild steelTMT bars 6 to 8mm dia, cut to length bent to shape required including cranking, bending spirally for hoping for columns, hocking, ends and binding with and incl MS wire (appealed) not less than 0.9 mm dia,complete all as specified and directed. |
| 79 | M&L for point wiring for one light/fan/call bell point with 1.5 sqmmPVC insulated (FR-LSH) unsheathed copper multistranded conductor cable 1100 volts grade controlled by one way switch including 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper multistrand conductor cable 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC casing caping with all accessories and sunk cast pressed steel terminal box made out of MS sheet 1.25mm thick with 3mm thick hylum laminated/bakalite sheet cover for mounting switch, socket, fan regulator,etc after and including taking down of old existing point wiring including fixtures and fittings such as switch, ceiling rose, holders, socket, etc and making good the distrubed surfaces as per the existing complete all as specified and as directed by the Engr-in-Charge. Note: Red coloured cable shall be used for live connection,black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. |
| 80 | All as per item No 79 here-in-above but for 3 pin 6 Ampssocket out let on the same board with 1.5 sqmm cable complete as specified and directed. |
| 81 | All as per item No 79 here-in-above but for 5 pin 6 Amps switch socket combination on the independent board with 1.5 sqmm cable complete as specified and directed. |
| 82 | All as per item No 79 here-in-above but for one 5 pin 6/16 Amps switch socket combination on independent board with 4.0 Sqmm PVC insulated unsheathed copper cable multistrand conductor 1100 volts grade and 4.0 sqmmcopper conductor cable as earth continuity conductor complete all as specified and directed. |
| 83 | Supply and fix piano switchmodular type 6 amps 230 volt single pole one way one module complete all as specified and as directed by the Engr-in-Charge. |
| 84 | Supply and fix piano switchmodular type 16 amps 230 volt single pole one way one module complete all as specified and as directed by the Engr-in-Charge. |
| 85 | Supply and fix modular socket multipurpose 2 in 1, 5 pin, 6 amps 230 volt , 2 module complete all as specified and as directed by the Engr-in-Charge. |
| 86 | Supply and fix modular socket multipurpose 2 in 1, 5 pin, 16 amps 230 volt , 2 module complete all as specified and as directed by the Engr-in-Charge. |
| 87 | Supply and fixing switch flush type 6 amps 230 volt single pole one way complete all as specified and as directed . |
| 88 | Supply and fix socket outlet 5 pin, 6 Amps, 230 volt flush type, complete all as specified and as directed. |
| 89 | Supply and fix switch socket combination multipurpose 2 in 1,5 pin 6 amps 230 volt flushtype complete all as specified and as directed. |
| 90 | Supply and fix 6/16 Amp switch socket combination multipurpose 2 in 1,5 pin, 230 volt flushtype complete all as specified and as directed. |
| 91 | Supply and fix bell ding dong AC 230 volts, single pole complete all as specified and as directed. |
| 92 | Supply and fix bell push flush type 5 Amps complete all as specified and as directed by the Engr-in-Charge. |
| 93 | Supply and fix ceiling rose surface bakelite three terminal65 x 50mm complete all as specified and as directed by the Engr-in-Charge. |
| 94 | S&F batton/ Angle holder insulated body with back plate suitable to batton fiting complete all as specified and as directed by the Engr-in-Charge. |
| 95 | Supply and fix stepped type eletronics fan regulator step type AC 240 volt 50 Hz complete all as specified and directed by the Engr-in-Charge. |
| 96 | Supply and fix modular fan regulator, step type, 120 W, 230 volt , 2 module complete all as specified and as directed by the Engr-in-Charge. |
| 97 | S&F white cover plate with frame 8 module complete all as specified and as directed. |
| 98 | S&F white cover plate with frame 4 module complete all as specified and as directed. |
| 99 | S&F white cover plate with frame 3 module complete all as specified and as directed. |
| 100 | S&F modular metal flush box 2 module complete all as specified and directed. |
| 101 | S&F modular metal flush box 8 module complete all as specified and directed. |
| 102 | S&F modular metal flush box 4 module complete all as specified and directed. |
| 103 | S&F modular metal flush box 3 module complete all as specified and directed. |
| 104 | S&F modular metal flush box 1/2 module complete all as specified and directed. |
| 105 | Supply and fix in repair new generation LED batten fitting20 W , 4 ft length, with extruded aluminium body, PC diffuser and inbuilt driver including necessary electric connection from ceiling rose to light fitting fitted on wall complete all as specified and as directed by the Engr-in-Charge. |
| 106 | All as per item no.105 here-in-above but for10 W (2Ft).complete all as specified and as directed by the Engr-in-Charge. |
| 107 | S&F in repair LED light fitting 10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and directed. |
| 108 | Supply and fixing LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver and lamp, impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed by the Engr-in-Charge.Make:Havells cat part No ENDURASUNDOWNSL45WLED765PASYBOTG or equivalent. make of M/s Surya Roshni Ltd, M/s Wipro, M/s Bajaj ,M/s Century (Magik) Led. |
| 109 | Supply and fix GI bracket made up of GI pipe 40 mm dia fixed on wall with clamp or PCC foundation on roof for fixing security light complete all as specified and as directed. |
| 110 | Supply and fix Ceiling fans AC single phase 230/ 240 V of size 1200 mm sweep with squirrel cage induction motor complete with three blades and down rods all as specified and directed. |
| 111 | Supply and fix metallic exhaust ventilation fan of sweep 300 mm sweep, 230volt AC complete with louver and all asssesories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing connected with rwin core twisted flexible copper conductor (23/0.0076) of size completeall as specified and directed. Note:- Cost of cutting and making hole for fixing exhaust fan shall be deemed to included in quoated rates |
| 112 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. complete all as specified and directed. |
| 113 | Supply and fix MCCB 63 Amps with sheet metal enclosure complete all as specified and directed . |
| 114 | Supply and fix as in repair MCB DB SPN 4 ways single door with 200 Amps rated bus bar neutral link, earth bar and din rail,recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge. |
| 115 | Supply and fix as in repair MCB DB SPN 8 ways single door with 200 Amps rated bus bar neutral link, earth bar and din rail,recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge. |
| 116 | Supply and fix as in repair MCB DB SPN 12 ways single door with 200 Amps rated bus bar neutral link, earth bar and din rail,recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge. |
| 117 | Supply and fixing in repair MCB 40 -63 Amps, SPN, 240 Volt \"C\" series, breaking capacity 10 KA complete all as specified and as directed by the Engr-in-Charge. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating). |
| 118 | Supply and fixing in repair MCB 06 - 32 Amps, SPN, 240 Volt \"C\" series, breaking capacity 10 KA complete all as specified and as directed by the Engr-in-Charge. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating). |
| 119 | Supply and fixing as in repair MCB 6 to 32 Amps, single pole, 240 Volt \"C\" series, breaking capacity 10 KA complete all as specified and as directed by the Engr-in-Charge. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating). |
| 120 | Supply and fix sub-main wiring (Concealed type) for main DB\"s to Sub DB\"s with PVC insulated & unsheathed two run of 6 Sqmm single core multi stranded copper conductor cable (FRLS), 1100 Volt grade alongwith one run of6 Sqmm PVC insulated & unsheathed copper conductor cable (FRLS), 1100 Volt grade, connected to common earth dolly asearth continuity conductor, drawn through existing conduit after and including taking down existing one complete all as specified and as directed by the Engr-in-Charge. Note : Three runs of 6 Sqmm cable shall measured as one length. |
| 121 | Supply and fix sub-main wiring (Concealed type) for main DB\"s to Sub DB\"s with PVC insulated & unsheathed two run of 4 Sqmm single core multi stranded copper conductor cable (FRLS), 1100 Volt grade alongwith one run of4 Sqmm PVC insulated & unsheathed copper conductor cable (FRLS), 1100 Volt grade, connected to common earth dolly asearth continuity conductor, drawn through existing conduit after and including taking down existing one complete all as specified and as directed by the Engr-in-Charge. Note : Three runs of 4 Sqmm cable shall measured as one length. |
| 122 | Supply and fix sub-main wiring (Concealed type) for main DB\"s to Sub DB\"s with PVC insulated & unsheathed two run of 1.5 Sqmm single core multi stranded copper conductor cable (FRLS), 1100 Volt grade alongwith one run of1.5 Sqmm PVC insulated & unsheathed copper conductor cable (FRLS), 1100 Volt grade, connected to common earth dolly asearth continuity conductor, drawn through existing conduit after and including taking down existing one complete all as specified and as directed by the Engr-in-Charge. Note : Three runs of 1.5 Sqmm cable shall measured as one length. |
| 123 | Supply and fixAC power supply unit 32 Amps with one Starter ,one MCB and one socket 6 module, complete all as specified and as directed. |
| 124 | Supply and fixsingle pole and neutral enclosure with two pin and earth,plugand socket , suitable for single phase 240 V, complete with one single pole MCB of capacity 20 amps having `C` charactristic, breaking capacity 10 KA, including industrial plug top, including taking down old u/s one complete all as specified and as directed. |
| 125 | Supply and laying under ground XLPE insulated PVC sheathed (Heavy duty) armoured 1100 volts grade aluminium conductor cable of size 10 Sqmm 2 core as per IS 7098 (Part I)on floor / wallwith suitable size clamp including connection with cable glands, aluminium lugs etc including taking down/ up existing unserviceable cable complete all as specified and as directed by the Engr-in-Charge. |
