Kerala State Nirmithi Kendra has published Tender For Setting Up Of Office At E Health Thiruvananthapuram. Submission Date for this Tender is 03-11-2022. Access Control Systems Tenders in thiruvananthapuram Kerala. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | CIVIL WORKS |
| 2 | 5.2.2 : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 3 | 6.3.2 : Brick work with common burnt clay machine moulded perforated bricks of classdesignation 12.5 conforming to IS: 2222 in superstructure above plinth level up tofloor five level in cement mortar 1:6 (1 cement : 6 coarse sand):With Modular bricks |
| 4 | 13.7.2 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand) |
| 5 | 22.23.1 : Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin- charge. The product performance shall carry guarantee for 10 years against any leakage.For vertical surface two coats @0.70 kg per sqm |
| 6 | 11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. |
| 7 | 11.37 : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. |
| 8 | 8.31 : Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 9 | 12.45.1 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1 |
| 10 | 13.88 : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 11 | 13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer |
| 12 | 13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 13 | 13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 14 | od138463/2022_2023 : Supplying and fixing full height woodenPaneling a combination of16mm and 9 mmBWR/BWP plywood andall exposed portions of the plywood shall be finished with 1mm thick Laminate of approved make and shade.Including all materials and labour charges etc. |
| 15 | od138525/2022_2023 : Supplying and fixing DowelPaneling with 25mm x18mm wooden dowels fixed on the BWR plywood panel overlaid with 1mm laminate surfaceIncluding all materials and labour charges etc. |
| 16 | od138614/2022_2023 : Supplying and fixing Rafters of size 50mm(w)x 40mm(d) x2800mm (h)with 9mm BWR/BWP plywoodandall exposed portions of the plywood shall be finished with 1mm thick textured Laminate of approved make and shade . Including all materials and labour charges etc. |
| 17 | od138799/2022_2023 : Supplying and fixing wooden base for rafters by covering with 9mm BWR plywood oneither side of Plywood frame work andall exposed portions of the plywood shall be finished with 1mm thick Laminateof approved make and shade and 8mm profile runner shall be fixed on the vertical portion of the base .Rate including all materials and labour charges etc. |
| 18 | od139216/2022_2023 : Supplying and fixing full height woodenpartition by covering with 9mm BWR/BWP plywood oneither side of 16mm Plywood frame work andall exposed portions of the plywood shall be finished with 1mm thick Sud Laminate of approved make and shade.Rate including all materials and labour charges etc. |
| 19 | od139452/2022_2023 : Supplying and fixing Glass partition with 6mm plain glass by covering with 9mm BWR/BWP plywood oneither side of 16mmPlywood frame work andall exposed portions of the plywood shall be finished with 1mm thick Laminate of approved make and shade.Rateincluding all materials and labour charges etc. |
| 20 | od139557/2022_2023 : Supply and fixing Mineral fibre edge hardened Acoustic panel of thickness 25 mm and panel shall made of rigid fiberglass insulation 70kg/m3 with tissue facing on both side. Fabric shall be wrapped around panels using fire retardant Adhesive. (Fabric shall be made of 100% Polyester – Class A fire treated with anti- Microbial / Anti-Fungalcomponents .Rates shall include all materials and labour charges etc |
| 21 | od141459/2022_2023 : Providing and fixingDoor frame using a combination of 6 mm, 9 mm, 12 mm and 18 mm BWR Grade Plywood overlaid with 1mm laminate Rateshall include all material,labour charges etc |
| 22 | od140255/2022_2023 : Providing and fixing Flush Doorin position overlaid with 1mmlaminate including vision panel,Tower bolthinges etc Rate quoted shall include all material, labour charges, cost of conveyance etc |
| 23 | od141471/2022_2023 : Supplying and fixing Door closer including all materials and labour charges etc |
| 24 | od141684/2022_2023 : Supplying and fixing decorative washable wallpaper including all material and labour charge etc |
| 25 | od141781/2022_2023 : Providing and fixing in place Reception tableof size 2400 mm x 600 mm x 750 mmmade of a combination ofBWR grade 6 mm, 12 mm and 16 mm plywood of approved quality and make; All exposed portions of the plywood shall be finished with 1mm thick Laminate of approved make and shade.The inside portion of the reception table shall be finished with 0.8mm laminate. The rate shall include all other necessary hardware materials and labour charges etc. |
| 26 | od141810/2022_2023 : Providing and fixingSide ReturnTable of size1200 mm (l) x 400mm (w) x 650 mm (h) shall be formed out of 16 mm thick BWR Plywood with 1mm laminate andall exposed edges lipped with PVC edge banding. Inside portion of the Table will be covered with0.8mm laminate.Rates include all materials and labour charges etc |
| 27 | od142250/2022_2023 : Providing and fixingModular Table of size 2200 mm (l) x 750mm (w) x 750 mm (h) shall be formed out of 16mm thick BWR Plywood with 1mm laminate andall exposed edges lipped with PVC edge banding. Inside portion of the Table shall be covered with0.8mm laminate including all materials and labour charges etc |
| 28 | od142253/2022_2023 : Providing and fixingModular Table of size1800 mm (l) x 750mm (w) x 750 mm (h) shall be formed out of 16 mm thick BWR Plywood with 1mm laminate andall exposed edges lipped with PVC edge banding. Inside portion of the Table shall be covered with0.8mm laminate including all materials and labour charges etc |
| 29 | od142276/2022_2023 : Providing and fixingModular Table of size 1500 mm (l) x 750mm (w) x 750 mm (h) shall be formed out of 18 mm thick BWR Plywood with 1mm laminate andall exposed edges lipped with PVC edge banding. Inside portion of the Table shall be covered with 0.8mm laminate including all materials and labour charges etc |
| 30 | od142309/2022_2023 : Providing and fixingSide ReturnTable of size 1200 mm (l) x 400mm (w) x 650 mm (h) shall be formed out of 18 mm thick BWR Plywood with 1mm laminate andall exposed edges lipped with PVC edge banding. Inside portion of the Table shall be covered with 0.8mm laminate.Rates include all materials and labour charges etc |
| 31 | od143072/2022_2023 : Providing and fixingSide ReturnTable of size 900 mm (l) x 400mm (w) x 650 mm (h) shall be formed out of 16 mm thick BWR Plywood with 1mm laminate andall exposed edges lipped with PVC edge banding. Inside portion of the Table will be covered with0.8mm laminate.Rates include all materials and labour charges etc |
| 32 | od142688/2022_2023 : Providing and fixing in placeDiastableof size 5200 mm x 600 mm x 750 mmmade of a combination ofBWR grade 6 mm, 12 mm and 16 mm plywood of approved quality and make; All exposed portions of the plywood shall be finished with 1mm thick Laminate of approved make and shade.The inside portion of thetable shall be finished with 0.8mm laminate. The rate shall include all other necessary hardware materials and labour charges etc |
| 33 | od143207/2022_2023 : Supplying and providing workstation of size 1200 mm (l)x 600 mm (w) x 750 mm (h) with vertical Coloured glassmember going up to 300 mm in height and table topto be formed out of 18 mm thick Pre-laminated particle board, laminate used for table top shall be scratch resistant & deflection resistant with all exposed edges lipped with PVC edge banding. Table top shall be supported on MS powder coated RAS legs or prelam gable ends including all materials and labour charges etc |
| 34 | od143343/2022_2023 : Supplying and providingPlus Formation workstation of size 1200 mm (l)x 600 mm (w) x 750 mm (h) with vertical member going up to 300 mm in height to be formed out of 18 mm thick Pre-laminated particle board, laminate used for table top shall be scratch resistant & deflection resistant with all exposed edges lipped with PVC edge banding. Table top shall be supported on MS powder coated RAS legs or prelam gable ends with PLB modesty in the front. All the exposed surfaces of the table to be finished in approved laminate. |
| 35 | od143437/2022_2023 : Supplying and fixingConferencetable of size 7200 mm (l) x 1500 mm (w) x 750 mm (h) to be formed out of 18 mm thick scratch resistant and deflection resistant Pre-laminated particle board. All exposed edges lipped with PVC edge banding with provision for wire manager and POP UP box .The rates including all materials and labour charges etc |
| 36 | od143498/2022_2023 : Providing and fixingFull Height storage of size 900 mm (l) x 400 mm (w) x 1900 mm (h) shall be formed out of 18 mm thick BWR Plywood with 1mm laminate andall exposed edges lipped with PVC edge banding. Inside portion of the storage will be covered with 0.8mm laminate.Rates include all materials and labour charges etc |
| 37 | od143638/2022_2023 : Supplying and fixing metal storage with locking systemof size 180x 90x40with paint finish rates shall include all materials and labour charges etc |
| 38 | od143602/2022_2023 : Providing and fixing Book Shelfwith 16mmBWRmarine Plywood over laid with1 mmhigh pressured decorative laminates .Rate Including all materials and labour charges etc. |
| 39 | od143889/2022_2023 : Providing and fixing CuriousShelfwith 16mmBWR marine Plywood over laid with1 mmhigh pressured decorative laminates with 25mmx25mm GI Tube frame .Rate Including all materials and labour charges etc |
| 40 | od143926/2022_2023 : SupplyingCentre table of size 500x1200.750 mm dia with 19 mm Plywood table top and frames |
| 41 | od143918/2022_2023 : Supplying and fixingDiningtable of size 900 mm (l) x 900 mm (w) x 750 mm (h) to be formed out of 18 mm thick scratch resistant and deflection resistant Pre-laminated particle board. All exposed edges lipped with PVC edge banding with provision for wire manager.The rates including all materials and labour charges etc |
| 42 | od143932/2022_2023 : Supplying PremiumExecutive HighBack net chair with hydraulic lifting mechanismand tilt lock, shodded on metal star legs with castors |
| 43 | od143974/2022_2023 : SupplyingExecutiveHighBack net chair with hydraulic lifting mechanismand tilt lock, shodded on metal star legs with castors |
| 44 | od144048/2022_2023 : Supplying Premium Medium back chair with S type metal legs |
| 45 | od144095/2022_2023 : Supplying Medium back chair with S type metal legs |
| 46 | od144240/2022_2023 : Supplying Medium back chair with hydraulic lifting mechanismand tilt lock and shodded on metal star legs with castors |
| 47 | od144951/2022_2023 : SupplyingHighBack net chair with hydraulic lifting mechanismand tilt lock, shodded on metal star legs with castors |
| 48 | od145170/2022_2023 : Supplying Highback Conferencechair with hydraulic lifting mechanismand tilt lock and shodded on metal star legs with castors |
| 49 | od145240/2022_2023 : Supplying Medium back Auditorium chair with hydraulic lifting mechanismand tilt lock and shodded on metal star legs with castors. |
| 50 | od145311/2022_2023 : Supplying Dining chair withmetal legs |
| 51 | od145324/2022_2023 : Supplying3 Seater visitor perfomesh chairs including all materials and labour charge etc |
| 52 | od145365/2022_2023 : Providing Couch 3 seater including all materials and labour charges etc |
| 53 | od145619/2022_2023 : Supplying and fixing 12mm toughenedGlass Door usingpatch fittings,including all materials and labour charges etc |
| 54 | od145657/2022_2023 : Supplying and fixing Heavy duty Floor spring for glass doorsincluding all materials and labour charges etc |
| 55 | od145750/2022_2023 : Supplying and fixing 400mm chrome finished Door handleincluding all materials and labour charges etc |
| 56 | od145771/2022_2023 : Providing and fixing all windowin position Roller Blinds, including all standard fitments and fabric.Rate quoted shall include all material,labour charges, cost of conveyance etc. |
| 57 | od145859/2022_2023 : Supplying and fixing Mediumsizeframed art prints on walls including all materials and labour charges etc |
| 58 | od145878/2022_2023 : Supplying indoor plantsincluding PU Pots andall materials and labour charges etc |
| 59 | od145939/2022_2023 : Supplying indoor mini plantsincluding PU Pots andall materials and labour charges etc |
| 60 | od145975/2022_2023 : Providing and fixing Planter boxes with 16mm BWR marine Plywood over laid with1 mmhigh pressured decorative laminates.Rate Including all materials and labour charges etc. |
| 61 | od145985/2022_2023 : Supplying and fixingLogo with acrylic sheet including all materialsand labour charges etc |
| 62 | od146051/2022_2023 : Supplying and fixing Signages with acrylic sheet including all materialsand labour charges etc |
| 63 | od146097/2022_2023 : Supplying and fixing Privacy film including all materialsand labour charges etc |
| 64 | od146146/2022_2023 : Engaging Labour for dismantling the existing brick wallpartition, paneling and door etc. |
| 65 | od146233/2022_2023 : Engaging Labour for dismantling the existing flooring and daddoing walls etc |
| 66 | PLUMBING WORKS |
| 67 | 18.53.1 : Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore |
| 68 | 17.4.1 : Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 69 | 17.7.2 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap |
| 70 | 17.73.2 : Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighting not less than 190 gms |
| 71 | 18.15.1 : Providing and fixing brass bib cock of approved quality :15 mm nominal bore |
| 72 | 18.16.1 : Providing and fixing brass stop cock of approved quality :15 mm nominal bore |
| 73 | 18.65 : Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fittings arrangements, weighing not less than 106 gms. |
| 74 | 50.18.7.2.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with claps at 1.00 metre spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20 mm dia 12Kgf/cm2 - Internal work - Exposed on wall |
| 75 | 50.18.7.4.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall |
| 76 | 50.18.7.6.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10 Kfg/cm - Internal work- Exposed on wall |
| 77 | 50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 |
| 78 | 50.17.1.5 : Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. |
| 79 | od146402/2022_2023 : Providing and fixing 150mm silt with CP gratings |
| 80 | 17.10.1.1 : Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink with drain board510x1040 mm bowl depth 250 mm |
| 81 | od146426/2022_2023 : Providingand fixing Single set Suit bathroom Closet and other accessories including all labour charges cost of materials etc complete |
| 82 | ELECTRICAL WORK |
| 83 | 1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C |
| 84 | 1.12 : Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 85 | 2.5.3 : Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB"s (but without MCB"s and incomer ) as required .(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)12 way (4 + 36), Double door |
| 86 | 2.3.1 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator6 way, Double door |
| 87 | 2.2.13 : Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required100 Amp, 30 KA 4 Pole |
| 88 | 2.15.3 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps |
| 89 | 2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole |
| 90 | 1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch |
| 91 | 1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet |
| 92 | 1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch |
| 93 | 1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet |
| 94 | 1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 95 | 1.14.3 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 96 | 1.14.4 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 6 Sq.mm + 1 x 6 sq.mm earth wire |
| 97 | 1.7.1 : Wiring for circuit/ sub main wiring alongwith earth wirewith the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 98 | 1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) |
| 99 | 1.27.4 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm) |
| 100 | 1.27.5 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm) |
| 101 | 1.28.2 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module |
| 102 | 1.28.4 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.6 Module |
| 103 | 1.28.5 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.8 Module |
| 104 | od138368/2022_2023 : Supplying and fixing 10Aminiature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 105 | od138383/2022_2023 : Supplying and fixing 16Aminiature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 106 | od138392/2022_2023 : Supplying and fixing 20Aminiature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 107 | od138451/2022_2023 : Supplying and fixing 63A SPminiature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 108 | od138465/2022_2023 : Supplying and fixing 63A TPminiature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 109 | od138542/2022_2023 : Providing and laying 70SQMM 3.5 core Aluminium UGCable from Existing panel Board to proposed panel Board rates including allmaterials and labour charges |
| 110 | od138606/2022_2023 : Supply and fixing Led 36w600mmx600mm Panel Light including all materials and labour charges etc |
| 111 | od138619/2022_2023 : Supply and fixing Led 18w300mmx300mm Panel Light including all materials and labour charges etc |
| 112 | od138693/2022_2023 : Supply and fixing Led 12 w Panel Light including all materials and labour charges etc |
| 113 | od138645/2022_2023 : Supply and fixing Led Strip Light including all materials and labour charges etc |
| 114 | od138709/2022_2023 : Supply and fixing Punch lamp including all materialsand labour charges etc |
| 115 | od138753/2022_2023 : Supplyingceiling mounted speakers |
| 116 | od139195/2022_2023 : Supplying and fixing exhaust fan including all materials and labour charges etc |
| 117 | od139462/2022_2023 : Supplying 10KV IGBT UPS with Three Phase Input and Single Phase output with inbuilt Isolation Transformer 240V with 20 numbers of 12 V 120 AH Tubular batteries for 2 hours back up.rates shall include all materials and labour charges etc |
| 118 | od139506/2022_2023 : Supplying 25KV IGBT UPS with Three Phase Input and Single Phase output with inbuilt Isolation Transformer 360V with 30 numbers of 12 V 150 AH Tubular batteries for 2 hours back up.rates shall include all materials and labour charges etc |
| 119 | od139515/2022_2023 : Supplying 5KV IGBT UPS with Three Phase Input and Single Phase output with inbuilt Isolation Transformer 120V with 20 numbers of 12 V 120 AH Tubular batteries for 2 hours back up.rates shall include all materials and labour charges etc |
| 120 | od139588/2022_2023 : Supply and fixing Pendent lamp including all materials and labour charges etc |
| 121 | AIR CONDITIONING |
| 122 | od139615/2022_2023 : Supplying and fixing 4TRcassetteSplit AC with cordless remoteincluding all installation charges etc |
| 123 | od140231/2022_2023 : Supplying and fixing 3TRcassetteSplit AC with cordless remoteincluding all installation charges etc |
| 124 | od143912/2022_2023 : Supplying and fixing 2.5 TR Mega Split AC with cordless remote including all installation charges etc |
| 125 | od143915/2022_2023 : Supplying and fixing 2 TR 3 StarSplit AC with cordless remoteincluding all installationcharges etc |
| 126 | od143925/2022_2023 : Supplying and fixinng 1.5 TR 3 StarSplit AC with cordless remote including allinstallation charges etc(Manager Admin and Manager |
| 127 | od143931/2022_2023 : Supplying and fixinng 1 TR 3 StarSplit AC with cordless remoteincluding all installation charges etc |
| 128 | od144044/2022_2023 : Supply and fixing 5 kv stabilizer including allincluding all installation charges etc |
| 129 | od144010/2022_2023 : Supply and fixing 4 kv stabilizer including allincluding all installation charges etc. |
| 130 | od144058/2022_2023 : Supply and fixing outdoor standincluding all materials and labour charges etc |
| 131 | od144072/2022_2023 : Installation charges for Airconditioning syatems. |
| 132 | od144098/2022_2023 : Providing additional copper piping for erection of AC unit |
| 133 | NETWORKING |
| 134 | od144296/2022_2023 : Supplying and fixing Switch 48 Port Giga Unmanagedincluding all materials and labour charges etc. including all materials and labour charges etc. |
| 135 | od144488/2022_2023 : Supplying and fixing Switch 24 Port Giga Unmanagedincluding all materials and labour charges etc.uding all materials and labour charges etc. |
| 136 | od144412/2022_2023 : Supplying and fixing Switch 16 Port Giga Unmanagedincluding all materials and labour charges etc.uding all materials and labour charges etc. |
| 137 | od144778/2022_2023 : Supplying and fixing Switch 8 Port POE Unmanagedincluding all materials and labour charges etc.uding all materials and labour charges etc. |
| 138 | od144781/2022_2023 : Supplying and fixing Switch 16 Port 10/100 2 Port Giga Poe Rackmount including all materials and labour charges etc.uding all materials and labour charges etc. |
| 139 | od145032/2022_2023 : Supplying and fixing Power Distribution Unit 6 Socket 6a/13a Pdu (Support 27u Rack Onwards) including all materials and labour charges etc. |
| 140 | od145183/2022_2023 : Supplying and fixing CEILING MOUNT ACCESS POINT WIRELESS N300 2.4ghz including all materials and labour charges etc. |
| 141 | od145197/2022_2023 : Supplying and fixing Floor Rack 33u 19” 600*800d including all materials and labour charges etc |
| 142 | od145255/2022_2023 : Supplying and fixing Patch Panel 24 Port Unloaded including all materials and labour charges etc. |
| 143 | od145256/2022_2023 : Supplying and fixing Floor Rack 15u 19” 600*600d including all materials and labour charges etc. |
| 144 | od145304/2022_2023 : Supplying and fixing Keystone Rj45 Cat6 including all materials and labour charges etc. |
| 145 | od145310/2022_2023 : Supplying and fixing Rj45 Connector Cat6 100n Box including all materials and labour charges etc |
| 146 | od145329/2022_2023 : Supplying and fixing Power Distribution Unit 10 Socket 6a/13a Pdu (Support 27u Rack Onwards) including all materials and labour charges etc. |
| 147 | od145327/2022_2023 : Supplying and fixing Power Distribution Unit 6 Socket 6a/13a Pdu (Support 27u Rack Onwards) including all materials and labour charges etc. |
| 148 | od145342/2022_2023 : Supplying and fixing Fan For All Rack Support including all materials and labour charges etc. |
| 149 | od145358/2022_2023 : Supplying and fixing Cantilever Tray |
| 150 | od145373/2022_2023 : Supplying and fixing Cable Manager 1u including all materials and labour charges etc. |
| 151 | od145582/2022_2023 : Supplying and fixing Hw Screw 10nos M 6 Cage Nuts including all materials and labour charges etc. |
| 152 | od145622/2022_2023 : Supplying and fixing Faceplate 1/2 Module including all materials and labour charges etc. |
| 153 | od145630/2022_2023 : Supplying and fixing Faceplate 3 Module including all materials and labour charges etc. |
| 154 | od145638/2022_2023 : Supplying and fixing Metal Box 1 Module including all materials and labour charges etc. |
| 155 | od145641/2022_2023 : Supplying and fixing Metal Box 3 Module including all materials and labour charges etc. |
| 156 | od145646/2022_2023 : Supplying and fixing Patch Cord Cat6 1m including all materials and labour charges etc. |
| 157 | od145648/2022_2023 : Supplying and fixing Patch Cord Cat6 2m including all materials and labour charges etc. |
| 158 | od145653/2022_2023 : Supplying and fixing Keystone Rj45 Cat6 including all materials and labour charges etc. |
| 159 | od145658/2022_2023 : Supplying and fixing Trunk Panel 10m including all materials and labour charges etc. |
| 160 | od145680/2022_2023 : Supplying and fixing Network Cable Cat6 including all materials and labour charges etc. |
| 161 | od145691/2022_2023 : Engaging labour for fixing Network Crimping + Rack Dressing + Commissioning including all materials and labour charges etc. |
| 162 | od145727/2022_2023 : Supplying and fixing Wire Tie 100/3nos + Tape 20nos including all materials and labour charges etc |
| 163 | TELEPHONE INTERCOM/EPABX SYSTEM |
| 164 | od145806/2022_2023 : Supplying Epabx 3 Trunk Line & 40 Ext |
| 165 | od145827/2022_2023 : Supplying 2 Line Lighting Protectioning all materials and labour charges etc. |
| 166 | od145860/2022_2023 : Supplying Neo Power Protection |
| 167 | od145871/2022_2023 : Supplying 24 Keys Digital Phone |
| 168 | od145877/2022_2023 : Supplying 50 Pair Junction Box |
| 169 | od145881/2022_2023 : Supplying10 Pair Krone Module |
| 170 | od145902/2022_2023 : Supplying Landline Corded Base Phone. |
| 171 | od145904/2022_2023 : Supplying Landline Corded Base Phone |
| 172 | od145907/2022_2023 : Supplying Display Landline Corded Base Phone |
| 173 | od145909/2022_2023 : Supplying Display Landline Corded Base Phone |
| 174 | od145913/2022_2023 : Supplying Landline Wall Phone |
| 175 | od145916/2022_2023 : Supplying Wireless Lane line Phone |
| 176 | od145964/2022_2023 : Supplying Keystone Rj11 |
| 177 | od145963/2022_2023 : Supplying and fixing Intercom Cable 2 Pair Finolex(1680m) |
| 178 | od145965/2022_2023 : Engaging labour for fixing Intercom Installation & Commissioning etc |
| 179 | CCTV SURVEILLANCE SYSTEM |
| 180 | od146039/2022_2023 : SupplyingNvr 32ch 256mbps Bit Rate Input Max (Up To 32-Ch Ip Video), 2 Sata Interfaces, Alarm I/O: 16/4, 1.5u Case,19” |
| 181 | od146052/2022_2023 : Supplying and fixing DOMR 2MP IP Cameraincluding all materials and labour charges etc |
| 182 | od146058/2022_2023 : Supplying Poe Switch 16 Port 10/100 2 Port Giga |
| 183 | od146062/2022_2023 : Supplying Poe Switch 8 Port 10/100 2 Port Giga |
| 184 | od146071/2022_2023 : Supplying Hdd 4tb Surveillance |
| 185 | od146075/2022_2023 : Rj45 Connector Cat6 100n Box |
| 186 | od146122/2022_2023 : Supplying Tv 32inch Led 1080p Fhd 3yr w |
| 187 | od146115/2022_2023 : Supplying Wireless Mouse 10m |
| 188 | od146125/2022_2023 : Supplying Tv 42” Wallmount Kit |
| 189 | od146142/2022_2023 : Supplying Camera Pvc Box 4*4 |
| 190 | od146176/2022_2023 : Supplying Hdmi Cable 1.4v 1080p 10mtr |
| 191 | od146255/2022_2023 : Supplying and fixing Cctv Lan Cat6 Cable including all materials and labour charges etc |
| 192 | AUDIO AND VEDIO SYSTEM |
| 193 | od146335/2022_2023 : Supplying Business Projector Dlp Fhd 1080p 2 Year Warranty |
| 194 | od146340/2022_2023 : Supplying Projector Stand Ceiling Mount 4ft |
| 195 | od146376/2022_2023 : Supplying Projector Screen Motorized |
| 196 | od146388/2022_2023 : Supplying Wireless Presenter |
| 197 | od146405/2022_2023 : Supplying Hdmi Cable 2.0v 4k 20m 3year Warranty |
| 198 | od146411/2022_2023 : Supplying4k Ultra Hd Eptz Usb Webcam, 120° Wide-Angle Fov, In-Built Dual Microphones |
| 199 | od146412/2022_2023 : SupplyingNetwork Cabling 20m & Commissioning Charge |
| 200 | PUBLIC ADRESSING SYSTEM |
| 201 | od146428/2022_2023 : Supplying and fixing Av Power Amplifier including all materials and labour charges etc |
| 202 | od146440/2022_2023 : Supplying and fixing Av Power Amplifier 50w including all materials and labour charges etc |
| 203 | od146849/2022_2023 : Supplying and fixing Av Power Amp lifier 160wincluding all materials and labour charges etc |
| 204 | od146851/2022_2023 : Supplying and fixing Aux Cable 20m including all materials and labour charges etc |
| 205 | od146856/2022_2023 : Supplying and fixingceiling mounted speakers including all materials and labour charges etc |
| 206 | od146855/2022_2023 : Supplying and fixing Wireless Microphone including all materials and labour charges etc |
| 207 | od146860/2022_2023 : Supplying and fixing Wired Microphone including all materials and labour charges etc |
| 208 | od146869/2022_2023 : Supplying and fixing Monojack Cable + Connector 20m including all materials and labour charges etc |
| 209 | od146883/2022_2023 : Supplying and fixing Mono Jack including all materials and labour charges etc |
| 210 | od146886/2022_2023 : Supplying and fixing Rca 3.5mm Jack including all materials and labour charges etc |
| 211 | od146889/2022_2023 : Supplying and fixing Pa System Cable 2 Pair including all materials and labour charges etc |
| 212 | od146890/2022_2023 : Engaging labour for fixing Pa System Commissioning including all materials and labour charges etc |
| 213 | ACCESS CONTROL SYSTEM |
| 214 | od146853/2022_2023 : Supplying and fixing Multi Door Access control system including all installation charges etc |
| 215 | od146864/2022_2023 : Supplying and fixing Biometric Finger Print Exit Reader system including all installation charges etc |
| 216 | od146884/2022_2023 : Supplying and fixing EM Single door locking system including all installation charges etc |
| 217 | od146893/2022_2023 : Supplying and fixing Biometric Attendence system including all installation charges etc |
| 218 | od146909/2022_2023 : Supplying and fixing Z/L Bracketsincluding all installation charges etc |
| 219 | od146963/2022_2023 : Supplying and fixing Biometric Finger Print Scanner system including all installation charges etc |
| 220 | od146968/2022_2023 : Supplying and fixing Patch cord including all installation charges etc |
| 221 | od147020/2022_2023 : Supplying and fixing Cabling for door lock including all installation charges etc |
| 222 | od147054/2022_2023 : Supplying and fixing EM lock including all materials and labour charges |
| 223 | od147110/2022_2023 : Providing Access device configuration &software and installation charges |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
