Supply Of Spares Of Coal Mills ( Hp-1103 ) To Rgtpp Khedar Hisar On Annual Rate Contract Basis. , Supply Of Spares Of Coal Mills ( Hp-1103 ) To Rgtpp Khedar Hisar On Annual Rate Contract Basis , Journal Housing Seal Cover For Journal Assembly Of Coal Mill Moc: Is1020 Cast Steel / En-24 , Journal Housing Liner Upper, Moc: Cast Steel As Per Is 1030 Grade-2 , Journal Housing Liner Lower, Moc- Ss-304 , Scrapper With Liner Plate Long, Moc: Is 1030, Gr-Ii, ( Cast Steel ) Moc Of Liner: Iss 276 Astm Grade-3 , Scrapper With Liner Plate, Short, Moc:Is 1030, Gr-Ii, ( Cast Steel ) Moc Of Liner: Iss 276 Astm Grade-3 , Feeder Outlet Gate Without Actuator , Roller Liner Device For Coal Mill , Ventury For Coal Mill , Ventury Vane For Coal Mill, Hardness 60 To 62 Hrc, Thickness-15Mm, ( 1Set= 4 Nos. ) , Air Restriction Ring Large Size ( Length Approx. 1800Mm, Width 60Mm, Thickness 28Mm ) ( 1 Set=8 Nos. ) , Air Restriction Ring Small Size ( Length Approx. 1800Mm, Width 35Mm, Thickness 28Mm ) ( 1 Set= 8 Nos. ) , Mill Body Deflector Support Plate Ms, ( 1 Set= 3 Nos. ) , Metallic Expansion Bellow For Pf Piping, 2 Nos. Congulation, Ss 304, 2 Mm Thick, Od: 710 Mm , Dresser Coupling For Center Feed Pipe Of Coal Mill , Eccentric Bearing Housing For Rc Feeder , Bearing Housing For Rc Feeder And Coal Mill Gt1651907 , Bearing Housing Left For Rc Feeder Model: Cs2036gt1630407 , Bearing Housing Right For Rc Feeder Model: Cs2036gt1630607 , Clean Out Conveyor Chain With Scrapper, Moc: Cast Alloy Steel, Pin: En-08, ( 1 Set= 82 Pieces ) , 72 Chain Links And 10 Chain Scrapper , Screw Stem For Belt Tightening, Moc- Ss-316 , Idler Roller For Rc Feeder Model:Cs2036, ( 1 Set=12 Nos. ) , Bushing For Rc Feeder And Coal Millgt1651807 , Bearing Housing Assembly & Rode Housing Assembly For Rc Feeder And Coal Millgt1632107 , Seals Of Hot Shut Off Gate- L2000 Mm, Width 115Mm, Thickness-1.5Mm, Moc-Ss-304 , Seals Of Hot Shut Off Gate-L1800mm, Width 115Mm, Thickness-1.5Mm, Moc-Ss-304 , Multiport Outlet ( Mpo ) For Coal Mill Ceramic Tile From Inside. Moc- Ms, Specification Of Ceramic Tile: Thickness-12 Mm, Weldable With Plug, Alumina Content More Than 90%, Hardness More Than 8 On Mohs Scale, Colour-White, Bulk Density More Than Tha 3.2 Gm / Cc, Water Absorption Less Than 0.5%, Cold Cushing Strength More Than 3000Kg / Cm2, Flexural Strength ( At Room Temperature ) More 2200Kg / Cm2, Flow Medium Is Pulverized Coal Mixture , Feeder Outlet Hopper Of Rc Feeder , Skirt Assembly, ( 1 Set = 4 Nos. ) , Shroud Plate 1360X120x10 Mm Moc- Ms ( 1 Set = 8 Nos. ) , Wearable Adjustable Shrink ( Adjustable Orifice ) Spares For Coal Mill ( Hp-1103 ) , Coal Pipe, Od-710 Mm, Model-Smk Type Sb , Three Dimensional Wearable Elbow No. 29 ( Drawing No. 50-F288s-J0502-37 ) , Vane Wheel Segment For Coal Mill ( Hp-1103 ) ( 1 Set = 8 Nos. ) , Mill Bowl Hub Clamping Ring Moc - 16 Mn ( 1 Set = 4 Nos. ) , Cover For Hot Air Diaphragm, Moc- Aluminium , Coupling For Cleanout Conveyor For Rc Feeder , Roller Retainer Ring For Coal Mills For Rc Feeder
