Military Engineer Services-MES has published Tender For Spl Repair To Bldg No T73 Provn Of Septic Tank For 121 Inf Bn Ta At Dimapur And Provn Of Open Assembly Shed With Ceramic Tiles In Trg Area Of 3 Cesr At Rms. Submission Date for this Tender is 21-11-2022. Building Work Tenders in rangapahar Nagaland. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 30-Oct-2022 | RevisedBOQ | BOQ | 14-11-2022 |
| 2 | 14-Nov-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-11-2022 |
| Sl. No. | Item Description |
| 1 | B/R Portion Dismantling asbestos cement (Corrugated or semi corrugated) sheets in roof covering. |
| 2 | Demolition of reed lathing single or double including battens and plaster or chicken wire lathing. |
| 3 | Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches etc complete |
| 4 | Taking down cement plaster on brick walls including raking out joints hacking for key, scrubbing down with water etc |
| 5 | Dismantling timber scantlings 40 sqcm and over in section, in unframed work any position. |
| 6 | Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level. |
| 7 | Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets complete all as specified . |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 9 | Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames. |
| 10 | All as per item 9 here-in-before but exceeding 1.5 Sqm but not exceeding 4 Sqm each |
| 11 | S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roofcovering /cladding to wall, fixed with self tapping screws as specified |
| 12 | S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 13 | S & F second class hardwood weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps. |
| 14 | M&L for second class hardwood as in scantlings clean sawn timberfixed. |
| 15 | M & L for plain fillets, square, rectangular or triangular in section clean sawn, secured with nails 2nd class hard wood exc 13and n.exc 25 sqcm. |
| 16 | Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints, 2nd class HW. |
| 17 | M&L for 35 mm thick 2nd class hardwood plain framed pannelled shutter (any number of panels) with panels of timber flat on both sides or of veneered particle board medium density , wood particle board with commercial face veneers , supplied and fitted to chowkats complete all as specified and directed. |
| 18 | S &F 35mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.23 (a) |
| 19 | S&F 30 mm thick 2nd hardwood glazed and skeleton window and ventilator shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. ( with and without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats. all as specified. |
| 20 | S&F for steel ventilator with top hung shutter including hunges steel peg stay. As complete all as specified and as directed by the Engineer-in-Charge |
| 21 | S & F chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc., and similar articles conforming to Fe 410-0 or Fe 310-0, complete all as specified and as directed by the Engineer-in-Charge |
| 22 | M&L for sheet glass 3mm thick ordinary quality, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane. |
| 23 | S&F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 18mm, fixed with tinned tacks or galvanized wire staples. |
| 24 | S & F 100 size stainless steel butt hinges complete all as specified and directed |
| 25 | S & F 75 size stainless steel butt hinges complete all as specified and directed |
| 26 | Supply & Fixing150 mm Aluminium handles, cast type, anodised |
| 27 | Supply & Fixing100 mm Aluminium handles, cast type, anodised |
| 28 | S & F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed |
| 29 | S & F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed |
| 30 | S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed. |
| 31 | S&F mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete |
| 32 | M&L for rendering 15 mm thick in CM 1:4 on one side of lathing finished even and smooth without using extra cement. |
| 33 | M&L for rendering 12 mm thick in CM 1:6 on other side of lathing finished even and smooth without using extra cement. |
| 34 | S & F 0.71 mm dia wire netting of galvanised steel wire of size 12 mm mesh fixed with tinned tack of wire staple. |
| 35 | Excavation over areas, n.exc 1.5m deep,and getting out for foundation, etc. soft/loose soil. |
| 36 | Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in any type of Soil. |
| 37 | M&L Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete. |
| 38 | M&L for PCC 1:2:4 type B-2 150 mm thick (using 40mm graded crushed stone aggregate) as in Septic Tank. |
| 39 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cm 1:6 complete all as specified and as directed. |
| 40 | Material & labour for brick work with sub class "B" bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4. |
| 41 | M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished fair and even without using extra cement. |
| 42 | M&L for rendering 15mm thick in CM 1:4 other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement. |
| 43 | M&L for preparation of new plastered or un plasteredsurface of walls including cornices, pilasters etc and applying two coats of cement base paint complete all as specified and directed. |
| 44 | M&L for preparation for newly plastered surfaces and applying three coats of white wash complete all as specified and as directed |
| 45 | M & L 75mmthick PCC 1:3:6 type C-2 (Using 40mm graded aggregated) as in plinth protection laid to slope 1:12 finishedfair and even without using extra cement and including all necessary from work to divide the area in panels, finished exposed edges fair or rounding and chamfering where directed and providing 10 mm wide joints though out thickness of plinth protection and duly filled with mastic filling (One part and hot bitumen 85/25 and three part of fine sand by weight) complete all specified and as directed. |
| 46 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 47 | M&L for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E 250) quality-A |
| 48 | M&L forhard core of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick broken stone, water and ramed to atrue surfaces complete all as specified and directed. |
| 49 | Demolition, Cement concreteof any description and in any position not otherwise specifically provided for complete all as specified and as directed by the Engineer-in-Charge. |
| 50 | M&L for preparation of newwooden fillets surfaces and wood based surfaces of any description not exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pint wood primer. in tint as directed. |
| 51 | M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint in any tint all as specified and directed |
| 52 | All as per item No 51 here-in-before but applying two coats of synthetic enamel paint over a coat of pink wood primer on new surfaces |
| 53 | M&L for preparation of newsurfaces of steel and iron work of any description over 10 cm width or girth not otherwise described andapplying two coat of synthetic enamel paint over a coat of redoxide on new surfaces in any tint complete all as specified. |
| 54 | M&L for preparation of old surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described andapplying one coat of synthetic enamel paintin any tint complete all as specified. |
| 55 | M&L for applying two coats of oil bound distemper on new plastered surfaces of walls including preparation of surface complete all as specified and directed. |
| 56 | M & L for 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 57 | M&L for Cement concrete type B-1 1:2:4, as in levelling course (using 20 mm graded aggregate), 40mm thick complete all as specified. |
| 58 | M&L for Plain Cement concrete type B-2, 1:2:4 (using 40mm graded aggregate) as in foundation filling and mass concrete all as specified. |
| 59 | M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) in section exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 60 | All as per item No 59 here-in-before but on vertical surfaces such as skirting , dado risers to stepsover and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed. |
| 61 | M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick CM (1:4) backing coat. |
| 62 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick CM (1:4) screed bed. |
| 63 | M&L for 18-20mm thick Granite (of any type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding andpolishing in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. |
| 64 | M&L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engineer-in-Charge. |
| 65 | S & F,Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 66 | S&F Factory made solid panel pvc doorshutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement suppling & fixing at site as per specification and drawing complete all as specified and directed. |
| 67 | S & F for4 mm thick of size 600x600mmHPSC (high pressure Steam Cured) pre-painted self embossed, textured designer boardE-Board Classic to be fixed or laid with GI frame grid/section size 600mm x 600mm with main runner 38x24x0.9 mm thick, cross tee 8.6x24x0.9mm and wall angle 19 x19x0.9mm duly suspended with 2mm dia GI bar hangers 1200mm centre to centre both waysfixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified. |
| 68 | M&L cement concrete type C2 1:3:6 (40 mm graded agg) as in surface channels and drains |
| 69 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl firms moulds |
| 70 | Demolition of cement concrete in reinforced of any description and in any position not otherwise specifically provided, complete all as specified & directed. |
| 71 | M&L TMT bars, 6 to 8mm, cut to length, bent to shape required including cranking,bending spirally for hooping for column, hooking ends and binding with and incl MS wire(annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 72 | M&L for precast cement concrete type B1 1:2:4(Using 20 mm graded stone aggregate) as in cover slabs, manhole cover, chamber cover and drainge cover set in cement mortar 1:6 including necessary formwok complete all as specified and directed. |
| 73 | Taking upor down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing. |
| 74 | Taking upor down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing. |
| 75 | S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore. |
| 76 | S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore. |
| 77 | Supply and fixed in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed |
| 78 | S & F in repairs vitreous china bowl urinal flat back size of 465x355x265 mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) |
| 79 | S&F in repairs vitreous china squatting pan "orissa" pattern size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe)complete all as specified and directed. |
| 80 | S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Seat cover complete all as directed. |
| 81 | S&F 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and dual fluash type complete all as specified(Make Cera, F1020106) complete all as specified and directed. |
| 82 | S&F in repairs for 15mm dia of pipe bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed. |
| 83 | S& F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot" or ‘Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as spfd & directed. |
| 84 | S&F in repairs for 15mm dia of pipe stopvalves,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed . |
| 85 | S&F in repairs PVC connection 15mm dia and 45cm long with two Nosof brass checknuts and washers complete. |
| 86 | S/F in repairs brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, complete all as spfd & directed |
| 87 | Supply and fixing of soap-dish chromium plated all as specified |
| 88 | S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms). |
| 89 | S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard wood embeded in cement mortor 1:3 with MS screwscomplete all as specified. |
| 90 | S& F in repairs PVC mounted 5mm thick bevelled edge looking mirror 600 x 450mm including taking down old fixed with chromium plated brass screws and cup washers. |
| 91 | S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor |
| 92 | S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor |
| 93 | S&F of 110mm dia PVC (SWR) bends. |
| 94 | S&F 75mm PVC(SWR) bends any radius with acess door. |
| 95 | S&F of 75mm dia PVC (SWR) Vent cowl. |
| 96 | S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 97 | S&F in repairs for 75mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof |
| 98 | M&L dismantling water tank of exc 500 ltr and not exc 1000 ltr Capacity. |
| 99 | S&F rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia all as specified anddirected. |
| 100 | Excavating in post holes (or similar holes) each n exc 0.5 cu. M, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in soft/ loose soil. |
| 101 | S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 |
| 102 | S&F steel work in purlinsincluding special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 |
| 103 | S&F steel work in pillarstrusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 |
| 104 | S&F plates (plain or chequered) channels. Square cut or notched ) (ordinary and counter sunk) forming holes, without any attachment, Fe 410-W |
| 105 | S&F mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other end to be fitted with washer and one hexagonal or squre nut n exc 15cm long 12mm dia |
| 106 | S&F mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other end to be fitted with washer and one hexagonal or squre nutexc 30cm long and dia 25mm |
| 107 | Returning, filling in soil incl watering, well ramming, etc. |
| 108 | Removing excavated soil to a dist n.exc.50m and depositing where directed at a level n. exc 1.50m above the starting points complete all as specified. |
| 109 | Supply only integral water proofing compound ( ISI marked ) |
| 110 | M&L for RCC 1:2:4 (20 mm graded stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and shrlves and the like. |
| 111 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete. |
| 112 | S&F TMT MS bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia as specified . |
| 113 | Material and labour for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in man hole and like etccompleteall as specified and as directed. |
| 114 | Precast RCC (1:2:4)type B-1 in manhole/soakwell/septic tank slabs/covers etc including necessary form work complete set in cement mortar 1:6 complete. |
| 115 | S&F110mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches |
| 116 | S&F of 110mm dia PVC (SWR) bends |
| 117 | S & F 110mm bore PVC (SWR) junction single ,(Single T) equal or unequalcomplete all as specified and directed. |
| 118 | S&F75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall/floor |
| 119 | S&F 75mm PVC(SWR) bends any radius with access door. |
| 120 | S&F of 75dia PVC (SWR) Vent cowl |
| 121 | S&F for depth 0.70m – 1.65 m, DWCPE (SN8) 180 (OD)/163(ID) mmdiameter Pipes laid on 150 mm thick PCC 1:3:6 type C-2 including packing under and haunching against the sides of pipes bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional all as specified and directed. |
| 122 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required. |
| 123 | E/M Portion Taking down carefullycopper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling,floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed. |
| 124 | M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable1100 volts grade with multi-stranded copper conductors, drawn throughand including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site complete all as specified and as directed.Make:- Richa/Finolex/Havells/RR KabelMake of caping/casing & PVC boxes :- Richa/Prestoplast/Finolex/supreme |
| 125 | Onelight/ Bell Point controlled by one way switch . |
| 126 | One Exh/Ceiling fan point controlled by one, one wayswitch. |
| 127 | One 3 pin socket outlet 5 Amps on the same board with other switches. |
| 128 | One 3 pin socket outlet 5 Amps on the Independent board. |
| 129 | All as per item No 124 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed. |
| 130 | M&L for Switch piano flush type single pole, one way 5AMake:- Havells/Legrand/Anchor |
| 131 | M&L for Socket outlet, 2 in 1, 3 pin 5A flush type Make:- Havells/Legrand/Anchor |
| 132 | M&L for Switch Socket combination, 2 in 1, 5 pin 5A flush type Make:- Havells/Legrand/Anchor |
| 133 | M&L Switch socket combination 2 in 1, 5A/16A, 5 in 1 flush typeMake:- Havells/Legrand/Anchor |
| 134 | M&L for stepped type electronic fan regulator 100/120 Watt socket size flush type on the existing phenolic laminated sheet etc. Make:- Havells/Legrand/Achor |
| 135 | M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and directed. Make:- Havells/Legrand/Achor |
| 136 | Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make:- Richa/Finolex/Havells/RR KabelMake of caping/casing :- Richa/Prestoplast/Finolex/supreme |
| 137 | S&F for 1x 20 Watt LED tube light fitting Wall/ Surface mounted, intergrated type with all accessories internally prewired and incl connecting up with and incl twin/ three core twisted flexible copper conductor cable of suitable size in and incl flexible hose from ceiling rose to fitting complete all as specified and as directed. Make : Havells/Crompton/Bajaj/Philips |
| 138 | All as per item No 133 here-in-before but10 wattLED, 2" batten, Wall mountedwith polycarbonate housing/ batten. Make : Havells/Crompton/Bajaj/Philips |
| 139 | M&L for Lamp holder , PVC/ Polycarbonate type with PVC round/square block incl 9 watt LED lamp suitable for lamp holder fittings complete all as specified and as directed. Make : Havells/Crompton/Bajaj/Philips |
| 140 | M&L for LED 1x20W buildingSecurity light fitting, drawn through including GI bracket of 25mm borelight grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling holesas required and connecting upwith flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose to the light fitting complete all as specified and directed. Make : Havells/Crompton/Bajaj/Philips |
| 141 | Taking down Exh/Ceiling fan of any sweep carefully from its installed position, dismantling complete, cleaning all dust, applying grease for bearing, painting of fans complete with superior quality synthetic enamel paint by spraying including filling cavaties with filler, after cleaning all dust, reassembling the fan and blades,hanging/ fixing the fan in its original position and testing on completion complete all as specified and as directed. |
| 142 | M&L for rubber bush with clamping set, comprising GI bolt, nut and split pin complete all as specified and as directed. |
| 143 | M&L for replacement of capacitor 2.5 Mfd incl making electrical connection complete all as specified and as directed. |
| 144 | M&L for replacement of steel ball bearing/bush of suitable size compatible to the existing ceiling fan/Exhaust Fan complete all as specified and as directed. |
| 145 | M&L for copper rewinding for suitable size complete to the existing ceiling /Exhaust fan complete all as specifed and as directed. |
| 146 | M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with copper bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacityincluding taking down old unsv MCB DBs complete all as specified and as directed. Make:- Legrand /ABB/Siemens |
| 147 | M&L for MCB SPN 32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB "C" seriesincl taking down old unsv MCB complete all as specified and as directed.Make:- Legrand /ABB/Siemens |
| 148 | M&L for MCB SP 6-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB "C" seriesincl taking down old unsv MCB complete all as specified and as directed. Make:- Legrand/ABB/Siemens |
| 149 | Taking down burnt unsv LT UG cable of any size and M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 2 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.Make : Richa/Havells/Polyacb/Finolex |
| 150 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft/ loose soil complete all as specified and as directed. |
| 151 | Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all complete all as specified and as directed. |
| 152 | Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all complete all as specified and as directed. |
| 153 | M&L for spread fine river sand in trenches complete all as specified and as directed. NOTE: For measurement purpose, punned down thickness shall only be taken. |
| 154 | M&L for laying brick sub class "B" old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed |
| 155 | Supply & laying tubes " Medium grade" galvanised, with all fittings, fixed complete to walls, poles, ceilings for protection of cables of size 40 mm dia bore including taking out unsv GI tubing complete all as specified and as directed. Make:- Jindal/TATA/Prakash surya |
| 156 | Material & Labour for earthing with galvanised steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead strip 32x6mm by means of bolts, nuts check nuts and washers of galvanised iron or steel as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified orindicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1, RCC (1:1.5:3) type A1 precast cover (54cmx54cmx5cm) duly reinforced with including 8 mm dia TMT bar @ 150mm c/c both ways, one lifting handle made of 8mm dia TMT bar, embeded in precast cover slab, funnel, 20mm dia GI medium grade watering pipe, 15mm dia GI light grade earth lead protection pipe, chorcoal and common salt in alternatee layer complete all as specified and directed by Engr-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
