Military Engineer Services-MES has published Provision Of Covered Path Near Bldg No. Np-01, Cattle Fencing, Court At Sainik Institute, Benches And Addn Altn Of Vehicle Washing Point And Chain Link Fencing From Bldg No. Np-153 To Pb-143 At Kanchrapara Under Ge Barrackpore. Submission Date for this Tender is 09-11-2022. General Hardware Tenders in barrackpore West Bengal. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | PART-I Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 2 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground embedded in concrete, brick work, masonry etc complete all as specified and directed. |
| 3 | Dismantling of fencing, wire mesh of any type and any position by screwing nuts, fillets, clamps complete all as specified and directed. |
| 4 | Surface dressing in soft /loose soil not exceeding 15 cm deep complete all as specified and directed. |
| 5 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundation or for shafts, well, cesspits, pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out in soft/loose soil complete all as specified and directed. |
| 6 | Excavating in post holes (or similar holes) in soft /loose soil each not exceeding 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good the surface complete all as specified and directed. |
| 7 | Removing surplus excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting points in soft/loose soil complete all as specified and directed. |
| 8 | Returning, filling in, including spreading leveling, watering and well ramming in layers not exceeding 25cm soil all as specified and directed. |
| 9 | M&L for broken brick hardcore of gauge not exceeding 63mm, deposited spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 10 | M&L forPCC (1:2:4) type B-2 (using 40 mm graded crushed stoneaggregate) as in foundation filling and mass concretecomplete all as specified and directed. |
| 11 | M&L forPCC (1:3:6) type C-2 (using 40 mm graded crushed stoneaggregate) asfoundations, filling, and mass concrete for fencing post, pillars etc complete all as specified and directed. |
| 12 | M&L forplain cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as inblocks, bed plates, fixing hold fast including necessary form work complete all as specified and directed. |
| 13 | M&L for brick work with sub class "B" bricks locally available best quality straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6) complete all as specified and directed. |
| 14 | Supply only integral water proofing compound liquid, ISI markedcomplete all as specified and directed. |
| 15 | S&F of second class hard woodplain, solid, straight chowkats and frames, wrought, framed rebatedon the solid, rounded or chamfered put together with glue pinned at jointsetc complete all as specified and directed. |
| 16 | S&F of 35mm thick (factory made) plain, second class hard wood,framed, panelled shutters (three panels)withlock rails and panel of12 mm veneered particle board with commercial veneering on both faces (BWR type), the size of rail and stile as per IS-1003 (Part-I) (larger size to be provided) klin seasoned and chemically pressure treated fitted to chowkats complete all as specified anddirected. |
| 17 | S&F for 300 mm aluminum alloy, anodised, sliding door bolt with hasp and staple (bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed complete all as specified and directed. |
| 18 | S&F of 200 mm long aluminium, anodised, barrel tower bolts of extruded sectionand fixed complete all as specified and directed. |
| 19 | S&F of 150 mm long aluminium anodised extruded alloy handle fabricated type complete all as specified and directed. |
| 20 | S&F for 100 mm long stainless steel butt hinges complete all as specified and directed. |
| 21 | S&F ofrolled mild steelroof trusses (framed) and purlins, rafters crane gantries, rails, heavy brackets etc including distance pieces, cleats, angle, tee etc including necessary cutting , welding etc complete Fe-410W (Gde E-250) quality "A"complete all as specified and directed. |
| 22 | M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing of Fe-410W (Gde E-250) quality "B" complete all as specified and directed. |
| 23 | S&F for mild steel screw bolts (machine made) 11 to 15mm with hexagonal head at one end and screwed the other end, each screw end to be fitted with two washers and one hexagonal or square nut, length of bolts 50mm to 100mm complete all as specified and directed. |
| 24 | S&F for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5cm but not exceeding 10cm long with dia of neck 11 to 15 mm complete all as specified and directed. |
| 25 | S&F for mild steelfencing post, bands, clamps, flat iron fillet,for screwing with mesh, straps, ties etc and similar work, fabricated for steel sections conforming to Fe-290 (Gde E-165) including necessary weliding, bending cold or hot, drilling holes for bolts in any shape or size as indicated complete allas specified and directed. |
| 26 | S&F of mild steel work, flat iron as in fencing post support conforming fo Fe-290-Gde-E-165 complete all as spcrified and directed. |
| 27 | Supply only MS round bars 10mm dia for securing chain link fencing fixed tofencing postsas per Fe-410-W (Gde- E-250) quality "A" or Fe-290 (Gde E-165)complete all as spcrified and directed. |
| 28 | S&F for galvanised iron chain link fencing with 4 mm dia of wire made up into matresses with mesh of size 100mmX100mm and type and fixedwith 10 mm dia MS round bars and straining including provision of binding wire for securingchain link fencingas per relevant IS specification and as approved complete all as specified and directed. (Note: 10 mm dia MS round bar shall be measured and paid separatelyunder Iitem No. 27.00 above as "Supply Only") |
| 29 | S&F for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings & straining & fixing to any type of standard rails straining bolts, including, securing or tying at crossings with & provision of galvanised mild steel wire, staples or steel pins, etc.after and including taking down old unserviceable galvanised steel barbed wirecomplete all as specified anddirected. (Note:Each line ofwire to be measured). |
| 30 | S&F of pre-painted galvalume aluminium zinc coatingGI basedcorrugated steel sheet of 0.50mm thick of any colour as approved by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 31 | S&F of pre-painted galvalume aluminium zinc coatingGI basedplain steel sheet of 0.50mm thick of any colour as approved by GE having tensile strength of 550 Mpa as in ridge / wall/cladding, fixed with self tapping screws complete all as specified and directed. |
| 32 | S&F of mild steel flat iron as in hold fast, wind tie including all necessary drilling, bolting or riveting etc and similar workconforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 33 | S&F formild steel works for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 34 | M&L for 100mm thick PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate), as in sub base of floorcompleteall as specified and directed. |
| 35 | M&L for 75mm thick PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate), as in sub base of floorcompleteall as specified and directed. |
| 36 | M&L for 50 mm thick cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in floor etc finished even and smooth without using extra cementcomplete all as specified and directed. |
| 37 | M&L for non skid (joint free) ceramic coloured tiles of 7 to 8 mmthick(square/rectangular) area of each tileexceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurryand pointed with white cement mixed with pigment to match with shed of tiles over and including 15mm thick screed bed or beading layer of cement mortar (1:4) for laying floor finishes completeall as specified and directed. |
| 38 | M&L for glazed ceramic coloured tilesin vertical surface of size 450 mmX 300 mmX7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match over and including10 mmthick rendering of cement mortar (1:3) complete all as specified and directed. |
| 39 | M&L for pre-polished coloured chequeredcement concrete tiles 30cm x 30cm x 25mm thick (glossy type), set, jointed and pointed in neat cement slurry in floors with grey cement and pigments over and including 20 mm thick cement screed bed in cement mortar (1:4)after and including dismantling existing floor earth and rubbish off the premisescomplete all as specified and directed. |
| 40 | M&L for rendering 15mm thick in cement mortar (1:6) on brick work or concrete surfaces of wall, finished even and smooth without using extra cement complete all as specified and directed. |
| 41 | M&L for rendering 15mm thick in cement mortar (1:4) on other than fair faces of brick work or concrete surfaces of wall, finished even and smooth without using extra cement complete all as specified and directed. |
| 42 | M&L for applying two coats of cement based paint over a coat of alkali resistance primeron newly plastered surface of walls including preparation ofsurface complete all as specified anddirected. |
| 43 | M&L for applying two coats of synthetic enamel paint (1st grade quality) overa coat of red oxide primer after preparation of new steel surfaces of any description over 10cm width or girth completeall as specified and directed. |
| 44 | M&L forapplying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer after preparation of new wooden surfaces of any descriptionover 10 cm girth or width complete all as specified and directed. |
| 45 | M&L for applying two coats of synthetic enamel paint (1st grade quality) over and including a coat of red oxide primer after preparation of new steel surfaces of any descriptionnot exceeding 10 cm width or girth complete all as specified and directed. |
| 46 | S&F of 15mm dia bib tap, fancy type, cast copper alloy with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferule, chromium plated with long screw typefixed completeall as specified anddirected. |
| 47 | S&F of 15 mm bore angular stop valve,fancy type, chromium plated ,cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unionscomplete all as specified and directed. |
| 48 | S&F of 15mm dia tubes (medium grade) galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, wall etc (surface or concealed type) complete all as specified and directed. |
| 49 | S&F of 20 mm dia tubes (medium grade) galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, wall etc (surface or concealed type) complete all as specified and directed. |
| 50 | S&F of badminton poles and net as per SAI specification including grouting in concrete during construction complete all as specified and directed. |
| 51 | S&F of synthetic flooring as per SAI specification including a layer of reinforcement net, two layers bitumen based coat, two layers of synthetic enamel paint and making of court complete as per SAI norms. |
| 52 | PART-II S&F of LED Flood light fitting 70 Watts 230 Volts, AC,Out door type with thermal management in multiple optics and equiped with IP-66 protection, with impact and corrosion resistant complete with driver and lamp completeall as specified and directed. |
| 53 | S&F of MCCB, 63 Amps, 4 pole, 16KA breaking capacity Icu at 415 Volt with thermal magnetic release, 50 Hz completeall as specified anddirected. |
| 54 | M&L for earthing with glavanised steel eart plate electrode of size 60cmX60cmX6mm thick buried directly in ground (earth pit not less than 2.25 m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts, check nutsand washers of galvanisediron or steel using GI or steel wire 4mm dia as earthing lead as shown in electrical plate No.3 of SSR Part-I connected to earthing test point all specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposalof surplus soil, earth pit in PCC (1:3:6) type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe , 15mm dia GI medium grade earth lead protection pipe and pre-cast earth pit cover 50mm thick made of RCC (1:1.5:3) type A-1 duly reinforced with 8mm dia TMT bar @150c/c both ways, one lifting handle made out of 10mm dia TMT bar 250 mm long embedded in cover slab and cover, wire, copper lugs etc mesh, charcoal and common salt in alternate layer of 15 cm thick completeall as specified and directed. (Notre: Galvanised iron wire of 4mm dia upto 7.5m long including testingis deemed to be included with quoted rate). |
| 55 | M&L for earthing with glavanised steel eart plate electrode of size 60cmX60cmX6mm thick buried directly in ground (earth pit not less than 2.25 m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts, check nutsand washers of galvanisediron or steel using GI strip of size 32X6mm as earthing lead as shown in electrical plate No.3 of SSR Part-I connected to earthing test point all specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposalof surplus soil, earth pit in PCC (1:3:6) type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe , 40mm dia GI medium grade earth lead protection pipe and pre-cast earth pit cover 50mm thick made of RCC (1:1.5:3) type A-1 duly reinforced with 8mm dia TMT bar @150c/c both ways, one lifting handle made out of 10mm dia TMT bar 250 mm long embedded in cover slab and cover, wire, copper lugs etc mesh, charcoal and common salt in alternate layer of 15 cm thickcompleteall as specified and directed. (Notre: Galvanised iron strip of size 32X6mm upto 7.5m long including testingis deemed to be included with quoted rate). |
| 56 | M&Lfor XLPE insulated, LT armoured electric cable with aluminium stranded conductor 1100 volts grade, cross-sectional area 25 sqmm, 4 core laid in trenches/pipes/ducts/wall/borings with necessary cable lugs and glands, nuts, bolts and washers etc and testingcompleteall as specified and directed. (NOTE: Excavation/earth work, sand cushioning, cable cover/brick shall be measured and paid separately if required) |
| 57 | M&Lfor XLPE insulated, LT armoured electric cable with aluminium stranded conductor 1100 volts grade, cross-sectional area 10 sqmm, 4 core laid in trenches/pipes/ducts/wall/borings with necessary cable lugs and glands, nuts, bolts and washers etc and testingcompleteall as specified and directed. (NOTE: Excavation/earth work, sand cushioning, cable cover/brick shall be measured and paid separately if required) |
| 58 | S&F of 1100 Volts grade heavy dutycable PVC insulated aluminium conductor served with inner sheathing of PVC tape and over all PVC insulated in street light connection from pole junction box at bottom to street light fixed on 9 mtr long swaged pole by making two holes with welding machine for inserting cable of size 4 Sqmm 2 core multistranded including making all necessary connection all as specified. |
| 59 | M&L for sand cushioning to under ground cable in trenches/existing cable trenches/ductsin layers of 8 cm deep before laying the cable and 15 cm deep including required watering and consolidation after laying and stretching the cable complete all as specified and directed. (Note: Only punned down volume of sand to be measured) |
| 60 | M&L for brick covering with width equal to length of brick asprotection to cable with well burnt sub class ‘B’ bricks of size 250mm x 125mm x 75mm laid dry flat complete all as specified and directed . |
| 61 | M&L for providing cement concrete (1:4:8), type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling for poles complete all as specified and directed |
| 62 | Cutting and screwing the existing steel tubing 50mm diadia for alteration or adding including screwing existing tube in position without taking throughthe tube complete. |
| 63 | M&L for GI pipe 80mm dia, medium grade, complete with all fittings in trenches,on wall, floors, on roofcomplete all as specified and directed. |
| 64 | M&L for GI pipe 25mm dia, medium grade, complete with all fittings in trenches,on wall, floors, on roofcomplete all as specified and directed. |
| 65 | M&L for GI pipe 50mm dia (light grade) complete with all fittings in trenches, road/culvert crossing,floors, on roof, on pole for cable protection complete all as specified and directed. |
| 66 | M&L for boring holes horizontallyunder road without damaging the surface of road (minimum 1.0m bellow the road surfaces) with the help of GI tubing of any dia not exceeding 100mm dia for passing of UG cable complete all as specified and directed. |
| 67 | S&F of MS cross arms, bracings, supports, clamp and back plates fabricated from structural steel section including nuts, bolts, washers, welding, bending cold or hot drilling holes for bolts in any type, shape or as indicated and directed inclusive of one coat of red oxide and one coat of aluminium paint complete all as specified and directed. |
| 68 | S&F for25 mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions pipes and fixedcomplete all as directed. |
| 69 | S&F ofvertical load line in sheet metal enclosures MCCB TPN DB"s with double door for incorporating MCCB as incomer and MCBs SP/SPN as outgooing , IP-43 , TPN 4 way with 200 amps rated busbar, 440 volts, as per IS-8623 complete all as specified and as directed. ( Note- MCCB 3 pole 63 amps as main incomer will be measured and paid separately) |
| 70 | S&F of CRCA kiosk box 2mm thick suitable for three phase 415 volts AC supply with 04 Nos aluminiumbus bar rating 63 amps with one No MCB 10 Amps , SP having size 350X250X150mm complete including making fixing arrangement with 9 mtr long swaged pole with flat iron clamp complete all as specified and directed. (Make- Universal switch control) |
| 71 | S&F of 03 seater benches of following specifications:- Frame - heavy duty cast iron. Legs & hand rest - heavy duty cast iron. Back and bottom support - first class hardwood total length and height - 160-165cm/85cm Seat height and depth - 40cm & 45cm Wooden support size - 155-160cm x 7.5cm x 2 cm No of support - 8 to 10 Load capacity - 300Kg Painting - Two coats of synthetic enamel paint over primer. Note - PCC for grouting shall be measured and paid seperately under relevant item |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
