Shri Mata Vaishno Devi Shrine Board has published Tender For Redevelopment Of Parvati Bhawan At Bhawan. Submission Date for this Tender is 31-10-2022. Building Repair Tenders in katra Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 20-Oct-2022 | Redevelopment of Parvati Bhawan at Bhawan | Technical Bid | 27-10-2022 |
| 2 | 28-Oct-2022 | Extension Notice | Date | 31-10-2022 |
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres. |
| 2 | All kinds of soil |
| 3 | Carriage of earth by Manual Labour including loading, unloading and stacking upto 1km distance |
| 4 | Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material: |
| 5 | All kinds of soil |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth, foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited sides of layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 7 | Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete. |
| 8 | Supplying chemical emulsion in sealed containers including delivery as specified. Chlorophriphos / Lindane emulsifiable concentrate of 20% |
| 9 | Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for pre-constructional anti-trermite treatment and creating a continuous chemical barrier under and all round the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of the building, expansion joint, over the top surface of consolidated earth on which apron is to be laid surroundings of pipes and conduits etc., complete as per specifications (plinth area of the building at ground floor level only shall be measured for payment) , chloropyrifos emusifiable concentrate 20% with 1% concentration |
| 10 | Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement) |
| 11 | CEMENT CONCRETE (CAST-IN-SITU): Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
| 12 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 14 | Add for plaster drip course/grooves in plastered surface or moulding to R.C.C. projections |
| 15 | Providing and laying in position machine batched and machine mixed design mix M-25grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately. All works upto plinth level |
| 16 | Providing and laying in position machine batched and machine mixed design mix M-25grade cement concrete for reinforced cement concrete work, using cement content as preapproved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability withoutimpairing strength and durability as per direction of Engineer-incharge. All works above plinth level upto floor “V” level Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately. |
| 17 | Add or deduct for using more or less cement in the items of design mix over and above the specified cement content therein. |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 19 | Foundations, footings, bases of columns etc. for mass concrete. |
| 20 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 21 | Suspended floors, roofs, landings, balconies and access platforms. |
| 22 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 23 | Columns, pillars, piers, abutments, posts and struts. |
| 24 | Stairs (excluding landings) except spiral staircases |
| 25 | Edges of slabs and breaks in floors and walls |
| 26 | Brick work with common burnt clay (non-modular) bricks of class designation 75: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 27 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 28 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 29 | Extra for half Brick masonry in superstructure above plinth level upto floor V level. |
| 30 | Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry. |
| 31 | Steel work in built up tubular (round, square or rectangular hollow tubesetc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 32 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, stairs, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels: Granite of any colour or shade (18mm) |
| 33 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 34 | Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete kitchen. |
| 35 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 36 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion Powder coated aluminum (minimum thickness of powder coated 50 microns) |
| 37 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in charge. Pre-laminated particle board with decorative lamination on both sides |
| 38 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
| 39 | Providing and fixing frosted film on plain glass of ventilators including labour and material complete. |
| 40 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. |
| 41 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. 50mm thick with 20 mm nominal size stone aggregate. |
| 42 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent |
| 43 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 40mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 44 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of tile 600x600 mm |
| 45 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 46 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110MM DIA PIPE |
| 47 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 110 mm gap for thermal expansion 12.59.5 Bend 87.5° 110MM DIA |
| 48 | Providing and fixing un-plasticised -PVC pipe clips of approved design to un-plasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm |
| 49 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diametre and weighing not less than 440 grams |
| 50 | CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 51 | CEMENT PLASTER (IN COARSE SAND) 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 coarse sand) |
| 52 | Washed stone grit plaster on exterior walls in two layers, under layer 12 mm cement plaster 1:4, top layer 15mm cement plaster 1: ½ :2 |
| 53 | 18 mm thick moulded cement mortar band in two coats under layer 12 mm thick with cement mortar 1 : 5 (1 cement : 5 coarse sand) top layer 6mm thick with cement mortar 1 : 4 (1 cement : 4 fine sand) |
| 54 | 18mm Cement plaster in two coats under layer 12mm thick cement plaster 1 : 5 (1 cement : 5 coarse sand) finished with a top layer 6mm thick cement plaster 1 : 3 (1 cement : 3 coarse sand) finished rough with sponge |
| 55 | Extra for plastering exterior walls of the height more than 10m from ground level for every additional height of 3m or part thereof. |
| 56 | INTERIOR FINISHING - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 57 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 58 | Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.( 2 mm thick ) |
| 59 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured |
| 60 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 1:3:6 or richer mix (i/c equivalent design mix) (as/CADD) |
| 61 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
| 62 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm (AS PER CADD) |
| 63 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead |
| 64 | Dismantling aluminum / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge. |
| 65 | Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately). |
| 66 | 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard manufactured from natural gypsum as per IS 2095 part-I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back sidemetalized polyester film so as to make the tile a completely sealed unit. |
| 67 | Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay (non modular) bricks |
| 68 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof |
| 69 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 70 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should haveprotective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 71 | (Sanitary and Plumbing Works) |
| 72 | Conceal Inside the Walls Providing and fixing of Polyethylene/Aluminium/Polyethylene (PE-AL-PE) Composite Pipes as per IAPMO IGC- INDIA 308, UMC-1TMcertificationmarked on the pipe at the interval not greater than 1 meter with nominal pipe size with manufacturer’s name or trade mark including all relevant DZR brass fittings as Female Elbows/Tees, MTC /FTC and Engineering plastic fittings with internal sealing system like Eq. elbows, Eq. tees, reducers, Straight couplersConnectors, clamps at one meter spacing, with PAP valves etc.MakeKitec , Maithilee and Vista.Concealed installation including cutting chases and making good in the wall etc, Complete in all respect. (Cold and Hot) |
| 73 | 1620(20MM OD) PIPE |
| 74 | 1620 6MM PRE-INSULATED PEX PIPE (FOR INTERNAL HOT WATER SUPPLY) |
| 75 | 2025 (25MM OD) PIPE |
| 76 | Providing Horizontal Open Well Submersible pumps 3 Phase, 5 HP, 3.7 kW,with flow upto 1050 LPM, Cast Iron Impeller, Cast Iron Casing and Body with CED Coating (corrosion protection) along with 3ph Control Panel. Make: Wilo, Xylem, Grundfos |
| 77 | WPO Raptor 50F/3 8224594, 3 Phase, 5 Hp, 3.7 kW, Max Head 54 meters, Max LPM 1100 liters, Suction 50mm and 50mm Delivery. |
| 78 | Conceal In floor Providing and fixing of Polyvinyl Chloride Pipe (PVC) 4kg/cm2 (0.4 MPa) class II in accordance with IS 4985 certification marked on the pipe at the interval not greater than 1 meter with nominal pipe size with manufacturer’s name or trade mark including all relevant Engineeringplasticfittings like tees, bends, couplers, y-tee, solvent etc.Including testing of lines and joints as per Engineer in charge . Make : Finolex or equivalent |
| 79 | 110 MM PVC PIPE |
| 80 | 75 MM PVC PIPE |
| 81 | 50 MM PVC PIPE |
| 82 | External Work Providing and fixing of Polyvinyl Chloride Pipe (PVC) 4kg/cm2 (0.4 MPa) class II in accordance with IS 4985 certification marked on the pipe at theinterval not greater than 1 meter with nominal pipe size with manufacturer’s name or trade mark including all relevant Engineeringplasticfittings like tees, bends, couplers, y-tee, solvent etc.Including testing of lines and joints as per Engineer in charge . Make : Finolex or equivalent |
| 83 | 160 MM PVC PIPE |
| 84 | Ventilation Fans Ventilation IL – 20 Wall Bearing Motor with 2 Years Replacement Warranty. Specification : Make : Wadbros , Model : WAD IL 20, Fan Size (mm) : 200, Rated Voltage (V) : 220-240 , Rated Frequency(Hz) : 50-60, Rated Power (W) : 70 , Air Delivery (m3/h) : 850, RPM : 2500 / 2050 |
| 85 | Male Floor |
| 86 | Female Floor |
| 87 | Plumbing Works /Water Supplies Internal work- Exposed on wall Providing and fixing of Polyethylene /Aluminum /Polyethylene (PE-AL-PE) Composite Pipes as per IAPMOIGC- INDIA 308, UMC-1TM certification marked on the pipe at the interval not greater than 1 meter with nominal pipe size with manufacturer’s name or trade mark including all relevant DZR brass fittings as Female Elbows/Tees, MTC /FTC and Engineeringplasticfittings with internal sealing system like Eq. elbows, Eq. tees, reducers, Straight couplers, Clamps at one meter spacing, with PAP valves and brass tank Nipples etc.Including testing of lines and joints as per Engineer in charge. Make Kitec ,Maithilee and Vista. |
| 88 | 2532(32 MM OD) PIPE |
| 89 | 3240(40MM OD) PIPE |
| 90 | External Work Providing and fixing of Polyethylene /Aluminium/ Polyethylene (PE-AL-PE) Composite Pipes as per IAPMO IGC- INDIA 308, UMC-1TM certification marked on the pipe at the interval not greater than 1 meter with nominal pipe size with manufacturer’s name or trade mark including all relevant DZR brass fittings as Female Elbows/Tees, MTC /FTC and Engineering plastic fittings with internal sealing system like Eq. elbows, Eq. tees, reducers, Straight couplers Connectors, with PAP valves etc. Trenching, re filling and testing etc. Complete as per Engineer In Charge. MakeKitec , Maithilee and Vista. |
| 91 | 1620(20MM OD) PIPE |
| 92 | 2025(25MM OD) PIPE |
| 93 | 2532 (32 MM OD) PIPE |
| 94 | 3240(40MM OD) PIPE (FOR STP LINE & RISING) |
| 95 | 4050(50MM OD) PIPE |
| 96 | PVC Water Tank Water Tank ISI Black 5000 Ltr Capacity |
| 97 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) |
| 98 | 15 mm dia. nominal bore (medium) |
| 99 | 20 mm dia. nominal bore (medium) |
| 100 | 25 mm dia. nominal bore (medium) |
| 101 | 40 mm dia. nominal bore (medium) |
| 102 | Specification of FRP Manhole Cover) Providing Fibre reinforced (FRP) manhole covers, including fixing and covering, with lifting keys, 2.5 and 5 tonnes load bearing capacities (Everlast make/ HP INTERNATIONAL). |
| 103 | Manhole Cover 600 x 600 mm 5 tonnes capacity |
| 104 | Manhole Cover 300 x 300 mm 2.5tonnes capacity |
| 105 | Providing and fixing washbasin with C.I. brackets 15mm dia. CP brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: (a) White Vitreous China wash basin size 550x400mm with a 15mm CP brass single hole basin mixer. |
| 106 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand iron P or S trap, 10 liter low level white PVC flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS:7231 , with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required |
| 107 | White vitreous china Orissa W.C. pan of size 580x440 mm with integral type foot rests |
| 108 | Providing and fixing white vitreous china pedestal type water closet(European type) with seat and lid , 10 litre low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets , 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid |
| 109 | Providing and fixing pressmatic pillar cock tap auto closing system with built in control cock. |
| 110 | Providing and fixing 15mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS: 8931. |
| 111 | Providing and fixing 15 mm nominal bore C.P. brass angle valve forbasin mixer and geyser points of approved make conforming to IS : 8931 |
| 112 | Providing and fixing HEALTH FAUCET WITH TUBE & HOOK of approved quality conforming to IS standards. |
| 113 | Providing and fixing OVER HEAD SHOWER of approved quality conforming to IS standards. |
| 114 | Providing and fixing SHOWER ROD 9” of approved quality conforming to IS standards. |
| 115 | Providing and fixing TOWEL ROD 24” of approved quality conforming to IS standards. |
| 116 | Providing and fixing SOAP DISH of approved quality conforming to IS standards. |
| 117 | Providing and fixingTOWEL RING of approved quality conforming to IS standards. |
| 118 | Providing and fixing C.P. NIPPLE 1” of approved quality conforming to IS standards. |
| 119 | Providing and fixingC.P NIPPLE1.5” of approved quality conforming to IS standards . |
| 120 | Providing and fixingWASTE COUPLING 1.25” X 4” of approved quality conforming to IS standards . |
| 121 | Providing and fixing P.V.C WASTE PIPEfor sink or wash basin including waste fittings complete: |
| 122 | Semi Rigid Pipe: 40mm dia |
| 123 | Providing and fixingC.P JAALI (HOLE) of approved quality conforming to IS standards . |
| 124 | Providing and fixingC.P JAALI (PLAIN) of approved quality conforming to IS standards . |
| 125 | Providing and fixing P.V. CON 18” of approved quality conforming to IS standards. |
| 126 | Providing and fixing 600x450mm beveled edge mirror of superior glass of approved quality complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 127 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and g.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: |
| 128 | One urinal basin with 5 litre white P.V.C automatic flushing cistern. |
| 129 | Electrical Works Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group ‘A’ |
| 130 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 131 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required |
| 132 | a)2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 133 | b)2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 134 | c) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 135 | d)4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 136 | e)4 X 16 sq. mm + 2 X 6 sq. mm earth wire |
| 137 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. |
| 138 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required |
| 139 | 25 mm |
| 140 | 32 mm |
| 141 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. a) 200 mm X 250 mm X 60 mm deep |
| 142 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. b) TV antenna socket outlet |
| 143 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 144 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 145 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. a) 1 or 2 Module (75mmX75mm) |
| 146 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 147 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 148 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 149 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. |
| 150 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 8 way , Double door SPN DB |
| 151 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 152 | a) 4 way (4 + 12), Double door TPN DB |
| 153 | b) 8 way (4 + 24), Double door TPN DB |
| 154 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single Pole |
| 155 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 156 | a) 40Amp |
| 157 | b) 63 Amp |
| 158 | Supplying & installing following size of perforated hot dipped Galvanised iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in connenient sections, joined with connectors, suspended from ceiling with G.I. Suspenders including G.I. Bolts & Nuts, etc as required. a) 300mm widthx50mm depthx1.6mm thickness |
| 159 | Supplying& installing following size of perforated hot dipped Galvanised iron cable tray "Tee" (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in connenient sections, joined with connectors, suspended from ceiling with G.I. Suspenders including G.I. Bolts & Nuts, etc as required. a) 300mm widthx50mm depthx1.6mm thickness |
| 160 | Supplying& installing following size of perforated hot dippedGalvanised iron cable tray "Tee" (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in connenientsections, joined with connectors, suspended from ceiling with G.I. Suspenders including G.I. Bolts & Nuts, etc as required. 300mm widthx50mm depthx1.6mm thickness |
| 161 | Supplying& installing following size of perforated hot dipped Galvanised iron cable tray" cross member" (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in connenient sections, joined with connectors,suspended from ceiling with G.I. Suspenders including G.I. Bolts & Nuts, etc as required. 300mm widthx50mm depthx1.6mm thickness |
| 162 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 163 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 164 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 165 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. |
| 166 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run). |
| 167 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) |
| 168 | Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. |
| 169 | Supplying, Installation, testing and commissioning of pre-wired, 20W LED ,6500K CCT and aluminium housing & decorative end caps tubelight fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 170 | Supplying,Installation, testing and commissioning of pre-wired, ultra slim recess mounted 1x4panel with white powder coated CRCA housing & full mounted acryllic diffuser with y- shaped hanging wire complete with all accessories etc. on existing ceiling, including connections with 2.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 171 | Supplying, Installation, testing and commissioning of pre-wired, ultra slim recess mounted 1x4panel with white powder coated CRCA housing & full mounted acryllic diffuser with y- shaped hanging wire complete with all accessories etc. on existing ceiling, including connections with 2.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 172 | Supplying, Installation, testing and commissioning of pre wired Surface mounted circular 18W LED down lighter luminior with die -cast aluminium housing in white housing white powder coated finish,anti-glare diffuser and energy efficient electronic driver , 6500K CCT , complete with all accessoriesetc. directly on ceiling, including connections with 2.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 173 | Supplying, Installation, testing and commissioning of pre-wired, 10W LED mirror light, 1 feet tubelight Warm White pvc body complete with all accessoriesdirectly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 174 | Supplying, Installation, testing and commissioning of pre-wired, 50W LED Flood Light , 5700K CCT complete with all accessoriesetc. directly on terrace/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 175 | Providing and fixing D- clamp with 2 nos 8 mm fastner on existing ceiling for hanging ceiling fans of 1200mm sweepas per the consent of engineer incharge. |
| 176 | Supply and Fixing of ceiling fan (Aluminium Body) operating on max 50W, including wiring, the down rods of standard length (upto 30 cm) with 3x1.5 sqmm FRLS PVC insulated copper conductor single core cables,Phenolic sheet cover etc., as required to do the job in all respect in accordance with laid specification or upto the satisfaction of engineer in charge. a) 1200 mm sweep ceiling fan upto maximum 50w |
| 177 | Supplying and fixing of TV outlet and push plug with 4 way / 3 way splitter special with hylam sheet complete with MS outlet box duly painted. |
| 178 | Supplying, Installation, Testing and Commissioning of dust, damp and vermin proof free floor standing factory built sheet steel enclosed modular construction extendable panel, suitable for operation on 415 + 10% volts, 50 Hz AC 3 phase 4 wire system fabricated out of suitable sized square tubular section and covered with 1.6mm thick CRCA sheet, hinged doors of 1.6mm thick CRCA sheet, duly painted complete with aluminium bus bars, interconnection with solid copper conductor wires / aluminium strips, neutral links, earth bus etc. necessary metering protections & indications and mounted with the following as per drawing and technical specifications attached etc. complete as required. Incoming: 160 Amp FP, 25 kAMCCB rotary handle with spreader link - 1No. 3 Nos. Phase indication LED lamps with 2 Amps back up MCB, breaker " ON/OFF" indicating light with 2A MCB 1 No. Intelligent multi-function digital panel meters of class 0.5accuracy with communication interface port R 485 for recording V (Between Phases and between each phase and neutral, A (In each phase and neutral), KWHr with suitable rating CTs, CT shorting links, R,Y, B LED indicating lamp and 2 A control SP MCB"s. Bus Bars: Electrolytic high conductivity aluminium Four Pole (full rated) bus bars rated at 433V,50 Hz., 200 amps, 35kA, insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints. Outgoing: 100amps, 415V4P MCCB "18kA" with overcurrent and short circuit Thermal based release.- 6 Nos. |
| 179 | Furniture Items |
| 180 | Office Table 1800 x 750 x 750mm (H) With 2 Drawer Box (PreLam Board) Supplying desk with Main Table of size 1800mm x 750 x 750mm including drawer pedestal and Return unit size 1200mm x 450 x 700mm (return unit with 18mm thick PreLaminated Particle board front sliding door lockable sides and closed back with 9mm thick PreLaminated Particle board). The Worktops shall be made of superior quality 25mm thick particle board of grade II, type II, confirming to IS : 12823 of approved shade. The top 25mm thick and side panels (18mm thick PreLaminated particle board) will be cladded with special post forming laminated of thickness 0.62X0.8mm. Wire managers and computer tray shall be provided on table top with 55-60mm dia to hold wires. All exposed edges of table shall have 2mm thick Hot melt PVC banding. |
| 181 | Executive Chair High Back Supplying of Ergonomically designed high back executive revolving chair with moulded foam seat and back, upholstered with specially developed low pilling permeable upholstery, user friendly concealed bio-synchro mechanism with one position locking and hydro pneumantic system for height adjustment.The chair has five prongs nylon base with premium quality castors. |
| 182 | Visitors Chair-1: Supplying of Ergonomically designed medium back visitor chair with moulded foam seat and back upholstered with specially developed low pilling permeable upholstery, soft touch PU arms rest. The chair has 25mm thick chromium plated / Powder coated cantilevered under structure. |
| 183 | Office Chair: Supplying of Ergonomically designed low back executive revolving chair with high density moulded foam seat, upholstered with specially developed low piling permeable upholstery, mesh back, user friendly push back mechanism, PP arms and hydro pneumatic system for easy height adjustment. The chair has five prongs nylon base with premium quality 60mm glass filled nylon castors. |
| 184 | Visitors Chair-2: Supplying of Ergonomically designed low back visitor chair with moulded foam seat with specially developed low pilling permeable upholstery and PU arms rest. The chair has 25mm thick chromium plated / Powder coated cantilevered under structure. |
| 185 | Sofa Three Seater: Supplying of Three seater ergonomically designed visitor sofa with right density foam seat and back upholstered with leatherite upholstery |
| 186 | Corner Table: Supplying corner table of size 610 x 610 x 430mm (H) with 25mm thick top and sides made of superior quality 25mm thick particle board of grade II, type II confirming to IS: 12823 of approved shade. The top and side panels will be claded with special post forming laminated of thickness 0.62X0.8mm. |
| 187 | Steno Storage 1800 x 400 x 2100mm (H) PreLam Board: Supplying of SWING DOOR STORAGE UNIT- The carcass is made out of 18mm thick PLPB top, sides, door, shelves and 9mm thick PLPB board with both side laminate with . The doors are made up of 18mm thick PLPB with hinges, handles & locks . The Storage unit is provided with Levellors for Height adjustment with the help of levellors . |
| 188 | LUGGAGE COUNTER 1200X600x1000 (lxwxh) Supplying & Fixing of Luggage Counter of size1200X600x1000 (lxwxh)using Stainless Steel Pipe 16 gauge square pipe (40mm x 40mm) 304 grade JSL Brand pipe & SS 16 gauge 304 (1.5mm thk) sheet & Base plate 304 6mm thk . fixed to floor with anchor bolts (REFER DWG. SMVDU-SMVDSB-PARVATI-A114) Wt./ counter = 90 kg @ Rs. 500/kg= Rs. 45000/- per counter (Refer DWG, SMVDU-SMVDSB-PARVATI-A114) |
| 189 | Supplying of Steel Almirah Internal Size of Almirah: 1850 (H) X 900 (W) X 450 (D) mm Leg Size of Almirah: 150 (H) X 120 (W) X 450 (D) mm Rack with 5 Compartments of 4 no. of shelves. Distance between each shelf will be 360 mm. These 4 shelves should be hanging arrangement (adjustable). Standard lock and 2 sets of keys. The thickness of the Almirah sheet shall be 18 SWG. The body of the Almirah shall be manufactured from cold rolled MS sheet (C. R. Sheet) with Antirust treatment and shall be finished with powder coating (color: Prince Gray). The quality of used M.S sheet for making Almirah shall be free from any pitting and corrosion etc. H/D Rubber bushes shall be provided to the bottom of legs of Almirah |
| 190 | Supplying of Slotted Angle Rack Size 2430 (H) X 915 (W) X 457 (D) mm Rack with 5 Compartments of 6 nos. of shelves. Distance between each shelf will be 410 mm.These 6 shelves should be hanging arrangement (adjustable). Rack will be three side covered & Front side opened. Racks shall be manufactured from Slotted M.S angle 14 SWG. Shelves shall be manufactured from 18 SWG thick sheet. The rack shall be assembled with G I bolt, nuts and washers.Slotted angle and M.S sheet shall be made of cold rolled with anti-rust treated and shall be finished with powder coating (color: Prince Gray). H/D Rubber bushes shall be provided to the bottom of legs of slotted angle racks.The quality of M.S sheet which is used for racks shall be free from any defects,Undulations, and old paints and surface corrosion, etc. |
| 191 | Supplying of CLOSED LOCKERS As per the Size and specifications mentioned in the dwg (Refer DWG, SMVDU-SMVDSB-PARVATI-A106) |
| 192 | Supplying of OPEN LOCKERS as per the size and specifications mentioned in the dwg (Refer DWG, SMVDU-SMVDSB-PARVATI-A107) |
| 193 | Providing & Fixing of Toilet Cubicle System in SS-304 MEDIUM Series of size Width 900mm x Depth 1500mm x Height 2000mm, Door Size - 600mm x 1830mm, Divider Height - 1530mm, Comprising of Rigid SS components: (1) SS304 Indicator Lock (2) SS304 Automatic Reverse Hinges (3) SS304 Height Adjustable Legs (4) SS304 Door Knob (5) SS304 Coat Hook & Aluminum (Brush Finish): (6) Top Rail (7) h Section (8) U Section (9) Silicon Strip to be inserted in h Section to provide Noise Dampening (10) Screws & Plugs with (11) Water, Chemical, Heat, Bacteria, Fire, Impact & Scratch Resistant 12 mm T Line High Pressure Compact Laminate. The 12mm HPL to have a minimum density of 1350 kg/m3 with a warpage limit of .5% of its length. The Top Rail will be fixed end to end and all the mid and end pilasters will get fixed into it. The whole system will have Upto 150 mm clearance height to the floor. U Sections will be used for Board to Board Jointing and Board to Wall Fixing |
| 194 | Providing & Fixing of Urinal Partition with SS Clamp which has a interconnection between which the Water, Chemical, Heat, Bacteria, Fire, Impact & Scratch Resistant 12 mm T Line Compact Laminate will be fixed and the other side of the clamp will be screwed in the wall from both sides. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
