Defence Research And Development Organisation -DRADO has published Tender For Provision Of Clean Room At Chess Laser Complex Kanchanbagh Hyderabad For Project Bcfl. Submission Date for this Tender is 08-11-2022. Building Work Tenders in hyderabad Telangana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 31-Oct-2022 | CORRIGENDUM 1 | Date | 04-11-2022 |
| 2 | 04-Nov-2022 | CORRIGENDUM 3 | Date | 08-11-2022 |
| Sl. No. | Item Description |
| 1 | SUBHEAD- EARTH WORK & EXCAVATION : |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 Sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 3 | All kinds of Soils |
| 4 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 Sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. |
| 5 | Ordinary Rock |
| 6 | Hard Rock (Blasting Prohibited) |
| 7 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. |
| 8 | All kinds of Soils |
| 9 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. |
| 10 | Ordinary Rock |
| 11 | Hard Rock (Blasting Prohibited) |
| 12 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 13 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 14 | Credit for Hard rock Obtained from above |
| 15 | Deduct for Using M-Sand instead of River Sand for filling / Concrete works at all levels and locations wherever approved by engineer-in-charge. |
| 16 | SUBHEAD-ANTI TERMITE TREATMENT : |
| 17 | Supplying chemical emulsion in sealed containers including delivery as specified. |
| 18 | Chlorpyriphos/ Lindane emulsifiable concentrate of 20% |
| 19 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : |
| 20 | Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc., with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. |
| 21 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. |
| 22 | Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. |
| 23 | SUBHEAD- PLAIN & REINFORCED CEMENT CONCRETE : |
| 24 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 25 | 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 26 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,pathways,etc., up to floor five level, excluding the cost of centering, shuttering and finishing: |
| 27 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) |
| 28 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. |
| 29 | Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS:9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. |
| 30 | (Note :- Cement content considered in this item is @ 330 kg/cum.Excess/less cement used as per design mix is payable/recoverable separately). |
| 31 | All works upto plinth level |
| 32 | All works above plinth level upto floor v level |
| 33 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in Recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. |
| 34 | (Note :- Cement content considered in this item is @ 330 kg/Cum. Excess/ less cement used as per design mix is payable/ recoverable separately). |
| 35 | All works above plinth level upto floor v level |
| 36 | Add/ Deduct for using extra/ less cement in the items of design mix over and above the specified cement content therein. |
| 37 | Supplying, fabricating and fixing in position reinforcement bars at all levels and positions including the cost of steel, straightening, cutting, bending, binding and placing in position etc., as per drawings and specifications including the cost of binding wire, labour etc., all complete for reinforced concrete. |
| 38 | Thermo-Mechanically Treated bars (Fe 500 Grade) |
| 39 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 40 | Foundations, footings, bases of columns, etc. for mass concrete |
| 41 | Suspended floors, roofs, landings, balconies and access platform |
| 42 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 43 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 44 | Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like. |
| 45 | Weather shade, Chajjas, corbels etc., including edges |
| 46 | Steps |
| 47 | SUBHEAD- STONE & BRICK MASONRY : |
| 48 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with, Cement mortar 1:6 (1 cement : 6 coarse sand). |
| 49 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand). |
| 50 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in Cement mortar 1:3 (1 cement : 3 coarse sand). |
| 51 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. |
| 52 | SUBHEAD-PLASTERING & SURFACE TREATMENT : |
| 53 | Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : |
| 54 | 6 mm cement plaster of mix cement mortar 1:3 (1 Cement : 3 fine sand). |
| 55 | 12 mm cement plaster finished with a floating coat of neat cement of mix 1:4 (1 cement: 4 fine sand). |
| 56 | 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand). |
| 57 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). |
| 58 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. |
| 59 | Providing and fixing 22 gauge chicken mesh wire at the junction of RCC and brick work with overlapping of 100mm on both sides, etc., complete. |
| 60 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 61 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 62 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour (Two or more coats on new work) complete, as per manufacturer’s specification. |
| 63 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. |
| 64 | New work (Two or more coats applied @ 1.43 litre/ 10 Sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm |
| 65 | Applying priming coat |
| 66 | With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 67 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade, Two or more coats on new work |
| 68 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. |
| 69 | French spirit polishing : Two or more coats on new works including a coat of wood filler |
| 70 | Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using |
| 71 | galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. |
| 72 | The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge. |
| 73 | SUBHEAD- FLOORING : |
| 74 | 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc., complete. |
| 75 | Providing cement skirting in CM (1:3) 18mm thick finished with a floating coat of neat cementetc., complete. |
| 76 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. |
| 77 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per Sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 78 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. |
| 79 | Same as above itembut in skirtingusing tiles of suitable size over and including 12mm thick base layer in cement mortar 1: 4 (1 cement : 4 coarse sand) etc., all complete as directed. |
| 80 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. |
| 81 | Double charge vitrified tile of Size 600x600 mm |
| 82 | Providing and layingDouble Charges Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. |
| 83 | Double charge vitrified tile of Size 600x600 mm |
| 84 | SUBHEAD-STEEL & WOOD WORKS : |
| 85 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 86 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. a) In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. |
| 87 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to openings /wooden frames with rawl plugs screws etc. |
| 88 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including MS pressed blet hinges 2.50mm thick with morter guards, lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: |
| 89 | Profile B, fixing with adjustable lugs with split end tail to each jamb |
| 90 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 91 | 35 mm thick |
| 92 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). |
| 93 | Providing and fixing the following hardware fittings of approved make: |
| 94 | 200mm long SS Tower Bolts |
| 95 | SS Aldrop 300mm long |
| 96 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. |
| 97 | 125mm long |
| 98 | Providing and fixing aluminium hanging floor door stopper (Single rubber stopper), ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 99 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 100 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. |
| 101 | Providing and fixing to existing door frames, 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. |
| 102 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). |
| 103 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories &Stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 104 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 105 | SUBHEAD- MISCELLANEOUS: |
| 106 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: |
| 107 | Applying a slurry coat of neat cement using 2.75 kg/Sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. |
| 108 | Laying brick bats with mortar using broken bricks/brick bats 25mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. |
| 109 | After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ Sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. |
| 110 | Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm square 3 mm deep. |
| 111 | The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.All above operations to be done in order and as directed and specified by the Engineer-in-Charge, with average thickness of 120 mm and minimum thickness at khurra as 65 mm. |
| 112 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 113 | Single socketed pipes of 110mm diameter |
| 114 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 115 | 110mm Bend 87.5° |
| 116 | 110mm Shoe (Plain) |
| 117 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 118 | 110mm |
| 119 | SUBHEAD-SANITARY SERVICES: |
| 120 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
| 121 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 122 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
| 123 | W.C. pan with ISI marked white solid plastic seat and lid. |
| 124 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc., including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 125 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. |
| 126 | Providing and fixing white vitreous china flat back urinal basin of 430x260x350 mm size. |
| 127 | Providing and fixing C.P 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60 gms. |
| 128 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 129 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps. |
| 130 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 131 | Providing and fixing toilet paper holder, C.P. Brass. |
| 132 | Supply and fixing of 15 mm CP Health faucet Cum bib tap with 1.25 mts long tube with end nuts and hook and 1 no 15 mm CP brass angular stop cock with wall flange, Hook to be fixed with CP brass with suitable counter sunk screws, all of approved make etc., complete. |
| 133 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
| 134 | Granite of any colour and shade. |
| 135 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc., complete as per design approved by Engineer-in-Charge. |
| 136 | Granite Work |
| 137 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/stone work, including necessary holes for pillar taps etc., including moulding, rubbing and polishing of cut edges etc. complete. |
| 138 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. |
| 139 | Granite Stone of approved shade |
| 140 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 141 | 32mmdia Flexible pipe |
| 142 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 143 | Providing and fixing cp towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 144 | Providing and fixing PVC/SWG Pipes conform to IS:13592-1992 of Type-A for sewage Disposal and Vent pipes Inclduing fixing of Clamps For every 1.5mt interval all necessary fittings likes bends, door bends, couplers, o Rings, Pasting solvent etc., complete. |
| 145 | 100mm dia PVC/SWG Single socket |
| 146 | 75mm dia PVC/SWG Single socket |
| 147 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete for PVC SWG Pipes conform to is 13592-1992. |
| 148 | 100mm dia PVC/SWG Single socket |
| 149 | 75mm dia PVC/SWG Single socket |
| 150 | Providing and fixing PVC door bends as per IS - 13592-1992 single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. |
| 151 | 100x100x100 mm |
| 152 | 75x75x75 mm |
| 153 | Providing and fixing terminal guard, Sand cast iron S&S as per IS - 3989. |
| 154 | 100mm dia. |
| 155 | 75mm dia. |
| 156 | Providing and fixing M.S. stays and clamps for pvc pipes of diameter. |
| 157 | 100mm |
| 158 | 75mm |
| 159 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors, Sand cast iron S&S as per IS: 3989. |
| 160 | 100 mm inlet and 100 mm outlet |
| 161 | Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : |
| 162 | 100mm dia. |
| 163 | 75 mm dia |
| 164 | Supply and fixing in position best quality and approved make CP brass coat hooks with flanges fixed to wall/door shutters with necessary screws washers etc., complete. |
| 165 | SUBHEAD-WATER SUPPLY SERVICES: |
| 166 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. - External Work. |
| 167 | 25 mm dia nominal bore |
| 168 | 32 mm dia nominal bore |
| 169 | 40 mm dia nominal bore |
| 170 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc., |
| 171 | 15 mm dia nominal bore |
| 172 | 20 mm dia nominal bore |
| 173 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 174 | 25 mm dia nominal bore |
| 175 | 32 mm dia nominal bore |
| 176 | 40 mm dia nominal bore |
| 177 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 178 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 179 | 25 mm nominal bore |
| 180 | Providing and fixing CP brass bib cock of approved quality : |
| 181 | 15 mm nominal bore |
| 182 | Providing and fixing CP brass stop cock of approved quality : |
| 183 | 15 mm nominal bore |
| 184 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. |
| 185 | 15 mm nominal bore |
| 186 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. |
| 187 | SUBHEAD-INTERNAL ELECTRIFICATION |
| 188 | Lights Points |
| 189 | Wiring for light point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed heavy class FRLS PVC conduit, with modular switch, Stainless Steel modular plate, suitable GI box and earthing the point with 1.5 sq.mm.FRLS PVC insulated copper conductor single core cable etc as required. |
| 190 | Group-C |
| 191 | Point Wiring for Light/ Fan/ exhaust fan with2runs of 1100V grade 1.5 Sq.mm & 1 run of1.5 Sq.mm FRLS insulated multistranded Copper wires, run in & including 25mm dia, 2mm thickness FRLS PVC ISI mark conduits concealed in wall after necessary chase cutting with finishing/surface in wall / ceiling conforming to IS 732 including all accessories such as junction boxes, conduit bends, elbows and ceiling rose, anodised GI Switch box withmodular switch and the box coveredwith Stainless Steel front plate. |
| 192 | Two Lights point controlled by one 6A switch. |
| 193 | Three Lights point controlled by one 6A switch. |
| 194 | Four Lights point controlled by one 6A switch. |
| 195 | Wiring for light point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed heavy class FRLS PVC conduit, with modular switch, Stainless Steel modular plate, suitable GI box and earthing the point with 1.5 sq.mm.FRLS PVC insulated copper conductor single core cable etc as required. |
| 196 | Group-C |
| 197 | Point Wiring for Light/ Fan/ exhaust fan with2runs of 1100V grade 1.5 Sq.mm & 1 run of1.5 Sq.mm FRLS insulated multistranded Copper wires, run in & including 25mm dia, 2mm thickness FRLS PVC ISI mark conduits concealed in wall after necessary chase cutting with finishing/surface in wall / ceiling conforming to IS 732 including all accessories such as junction boxes, conduit bends, elbows and ceiling rose, anodised GI Switch box withmodular switch and the box coveredwith front plate. |
| 198 | Two Lights point controlled by one 6A switch. |
| 199 | Three Lights point controlled by one 6A switch. |
| 200 | Four Lights point controlled by one 6A switch. |
| 201 | Wiring for twin control light pointt with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed heavy class FRLS PVC conduit, with 2 nos modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm.FRLS PVC insulated copper conductor single core cable etc as required. |
| 202 | Supplying and fixing two module 100w stepped type electronic fan regulator on themodular plate switch box including connections,modular plate etc. as required. |
| 203 | Supplying and fixing suitable size GI box with modular Stainless Steelplate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 204 | Supplying and fixing suitable size GI box with modular front plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 205 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed heavy class FRLS PVC conduit as required |
| 206 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 207 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 208 | 4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire |
| 209 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 210 | Light/Fan Fixtures |
| 211 | Supply, Installation, Testing & Commissioning of the following clean room / non clean room LEDLight Fixture with lamp, Control Gear & All necessary accessories. Luminaries with all electrical accessories & it should be energy efficient, etc are prewired up to the terminal block & mounted on a removable control gear module for ease of maintenance. All electrical connections of the control gear module with the rest of the luminaries should be click fix & require use of no tools. Mounting options should be for both lateral as well as pole top mounting with Lamp Control Gear & Fixing Accessories.All fixtures shall be white colour & supplied with white lamps. All the light fixtures will be finally approved by Architect / Consultant/ Department. Architect / Consultant / Department reserves the right to reject the fittings suggested by the contractor. |
| 212 | 36W LED PureSpace CleanRoom Range fixture similar toCat no.CR652B LED36S-6500 PSU CA BO W60L60 WH, Philips make or it"s equivalent. |
| 213 | 35.1W LED Batten fixture similar to Cat no. BN308C LED40S-6500 L12O PSU WH, Philips make or it"s equivalent. |
| 214 | 17.9W LED Downlighter fixture similar to Cat no. SM251C LED20S-6500 PSU WH, Philips make or it"s equivalent. |
| 215 | 13.7W LED Downlighter fixture similar to Cat no. SM296C LED15S-6500 PSU WH_919515814689, Philips make or it"s equivalent. |
| 216 | 30.9W LED 2"X2" luminaire similar to Cat no. RC380B G6 LED36S-6500 G6 L60W60 PSU OD, Philips make |
| 217 | Supply of 1200 mm sweep 5star rated Ceiling fan with standard down rod, all accessories Electrical connections. Including fixingmaterials as required. |
| 218 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. |
| 219 | Supply and fixing of 16" wall mounting fans with all accessories and connection etc., complete. |
| 220 | Supply, Installation & Testing of following 900 RPM exhaust fan suitable for single phase, 240V, AC supply complete with motor, MS louvers, mounting brackets, all accessories etc complete. |
| 221 | 380mm Sweep |
| 222 | Supply Installation Testing and commissioning of TPN MCB Double door Distribution boards dust and verminprotected and rated for 415V Three Phase AC supply operation including incoming MCB /ELCB as per specifications and required capacity Neutral bar and Earth terminal complete as required and installed in concealed in wall after necessary chase cutting with finishing/ surface in wall including all fixing materials required. MCBs shall conform to IS : 8828 and ELCB shall conform to IS :12640. All MCBs shall be "C" Curve. DBs shall be provided along with required wire adopter boxes around the DB as required and dummys for spare ways in the DB (No claim shall be allowed for the same). |
| 223 | 4Way TPNMCBDB with 40A, 30mA 4Pole RCBO as incomer and 9 nos 6-25A SPMCBs and 3nos 8KA SP SPDs as outgoings. (LDBs) |
| 224 | SUBHEAD- AIR CONDITIONING |
| 225 | CLEAN ROOM -GROUND FLOOR-CHW SYSTEM |
| 226 | AIR COOLED SCREW CHILLERS: |
| 227 | Supply, Installation, Testing and Commissioning of the 90TR net capacity at actual condtions for R 134a, Air cooled screw chillers including itsdrive motors ,condensors, condensor fans, expansion device, micro processor control with RS-485 port,nessary operational and safety devices, placed on the concrete pedestal ,including loading, unloading, rigging and transportation upto chiller location with necessary spring vibration isolators, flow switch, victaulic couplings, canopy for chiller control panel,etc. at the following conditions. Ambient temperature 106 °F / 78°F WBT, chilled water inlet temp is 52.8° F and outlet tempis 42.8°F ,Fouling Factor 0.0005 ft2/h/°F/BTU for Chiller as per specification.(1W) |
| 228 | CHILLED WATER PRIMARYPUMPS : |
| 229 | Supply, installation, testing and commissioning ofcentrifugal End Suction Long Coupled Top Discharge Chilled Water Primary Pumps with high efficency (EFF#1) electric drive motor, as per technicalspecifications (impellers and wearing rings made of bronze, priming funnel and air purging provision with valves and with necessary grouting, foundation bolts, etc.)including customs clearance and transportation to site. Inertia base Foundation for pumps shall be carried out by hvac contractor until or unless stipulated else where otherwise. Allpumpsshallbemountedwith necessary vibration isolators. Each Pump capacity shall be 216USGPM @ 15 mt. head as per specifications and approved drawings .(1W+1S) |
| 230 | CHILLED WATER SECONDARY PUMPS ( VARIABLE SPEED) : |
| 231 | Supply, installation, testing and commissioning ofcentrifugal End Suction Long Coupled Top Discharge Chilled Water Secondary Pumps with high efficency (EFF#1) electric drive motor, as per technicalspecifications (impellers and wearing rings made of bronze, priming funnel and air purging provision with valves and with necessary grouting, foundation bolts, etc.)including customs clearance and transportation to site. Inertia base Foundation for pumps shall be carried out by hvac contractor until or unless stipulated else where otherwise. Allpumpsshallbemountedwith necessary vibration isolators. Each Pump capacity shall be216USGPM @ 30 mt. head as per specifications and approved drawings .(1W+1S) |
| 232 | VARIABLE FREQUENCY DRIVES & LOGIC CONTROL PANEL: |
| 233 | Supply, Installation, Testing & Commissioning fo variable speed pumping system comprising of following accessories. The system shall be complete in all respects including electrical components for motor of primarychilled water pumps. Each pump shall have an independent adjustable frequency drive. Common Panel with suitable controller to control 2 Nos. Pumps separately. as per specs and drawing. Including sensor, transmiter, control wiring etc complete in all respect. It shall be also BMS compatible. Panel should be IP 55 Rated. |
| 234 | For Secondarychilled water pumps |
| 235 | Variable frequency drive (VFD): 1 Nos |
| 236 | Micro processor based pump controller : 1 No |
| 237 | Differential pressure sensors/Transmitters : 1 Nos |
| 238 | Software down loaded in pump controller : Job |
| 239 | Control wiring : Lot |
| 240 | Variable speed pumping system described above |
| 241 | AIR & DIRT SEPERATOR |
| 242 | Supply Installation Testing and Commissioning of In-line Air & Dirt Separator. removing of free air, bubbles and microbubbles in combination with separation and removal of dirt particles within chilled water system. The acceptable design shall incorporate a separating element to force water into tranquillity zones for air and dirt removal.A nozzle shall force de-aerated water into the main flow to divert contaminated water through the separating element.A high capacity, conical brass automatic air vent shall be installed on the top of the vessel for air discharge. Drain valve for removal of floating debris and dirt. Heavier than water dirt particles shall be removed via a blow down valve on the base of the vessel whilst ferrous particles down to 4 µm shall be captured by a magnetic device in the lower part of the vessel. Manufactured and designed in accordance with European Pressure Equipment Directive The Microbubble Air and Dirt Separator shall be sized appropriate to the maximum operating pressure and flow velocity 216USGPM of the system.as per the specifications and approved drawings. |
| 243 | PRESSURIZATION SET: |
| 244 | Supply, Installation, Testing and Commissioning of Insulated Pressurisation Unit (1000 L)of requisite capacity with necessary makeup, quick fill, drain and over flow connection, valves, fittings, suitable rating pump(1W+1S),expansion vessel (1000 L), necessary pump connection along with valves,stariner and compleate panel etc. Allpump"sshallbemountedwith necessary vibration isolators, etc. as per the specifications and approved drawings. |
| 245 | CALORIFIERS |
| 246 | Design,Supply installation testing and commissioning of 100 LIT capacity galvanised steel shellwith removable electric water element of min 15KW, designed for inlet temp of 60deg C and70 deg C water out let with nessary fittings , valves, mounting brakets as per specification. |
| 247 | HOT WATER PUMPS |
| 248 | Design,Supply, installation and testing and commissioning of Horizontal Multistage monoblock Centrifugal pump with necessary grouting, foundation bolts, etc. including customs clearance and transportation to site , testing and commissioning of constant speed hot waterpumps. Each Pump capacity shall be 30 USGPM @ 15 mt. head, mounted on frame with factory fitted nessary fittings, valves , pressure guages,header , control panel and expansion tank (100 L) as per specification. |
| 249 | HOT WATER PIPES |
| 250 | Supply, Installation, Testing and Commissioning of MS "C" Classhot water pipe with fittings, flanges, valves,reducers ,sockets for probe meter, support hangers with vibration isolation hanger etc with Supply, Installation, Testing and Commissioning of chilled water pipe insulation with44mm thick closed cell elastrometric nitrile rubber of density 43 Kg/m3, Thermal conductivity not exceeding 0.035 W/M°K Class 1, fire performance to pass class 1 as per BS 476 part 6& class O as per BS 476 part 7 & use recommended adhesive. the insulation finished with treated woven glass fiber reinforced covering & further finished with 24G Aluminium cladding as per the specifications and approved drawings. |
| 251 | Ø 50 mm |
| 252 | AIR HANDLING SYSTEM: |
| 253 | Design,Supply, installation and testing and commissioning of double Skin AHU"s With 50 mm Sand witched PUF Insulation, Thermal break profile with 0.8mm GI pre painted outer skin and 0.8mm GIinner skin comprising ofMixing box section for fresh air module and RA connections, reactivation module complete with filter ,blower ,Electric Heaters,pre filter section with 10 micron washable filters of 90% efficiency, fine filter section , 5 micron filters of 97% efficiency , Pre / Post cooling coil module section complete with necssaryand drift eliminator of ABS construction, , Fan section with DIDW , TEFC(IE-3) motor, spring isolators & fire retardant canvass connection at the outlet of fan, and provision to fixdamper at the inlet/outlet of AHU etc as per Specification ,AHU should meet Cleanroom specifications so that the validation process as per ISO 14644 is achieved by the contractor. .Standard as applicable for Clean Rooms. Digital Thermostat with remote sensing element to be included , Magnehellic gauges for measuring the differential pressure across HEPA filters for the AHUs of range 0 to 50mm as per specification,consisting of energy efficient imported desiccant rotor,controls,filters,total frame work is provided 4 -20m Amps RH and temperature transmitter for +/- % accurate control,microprocessor based Mitsubishi PLC module or equivalent with color HMI for system fault indication etc.Pre cooling coil module with in double skinned casing for treated fresh air with 8 row coil ,damper and pre filter is considered. All internal blankoffs, filter frame, fan/motor base shall be made of Powder coated GI including 100mm powder coated GI baseframe. |
| 254 | Nominal Cooling Capacity at ARI/Eurovent conditions |
| 255 | AHU - 1&2 - CAP : 33TR / Selected SA CFM :8200 CFM / 150 mm TSP. |
| 256 | DRAIN: |
| 257 | Supply, Installation, Testing and Commissioning of CPVC (Chlorinated Poly Vinyl Chloride) pipes condensate drain piping insulated using 9 mm thick nitrile rubber tubes including fitting and supports as per specified . |
| 258 | Ø 32 mm |
| 259 | Ø 40 mm |
| 260 | AIR FILTRATION SYSTEM |
| 261 | Supply, Installation, Testing and Commissioning of Box type HEPA filters of capacity 1000 CFM & size 610 x 610 x 305mm deep with an efficiency 99.97% down to 0.3 micron particles and the filter to be openable from bottom of ceiling panel. |
| 262 | Supply, Installation, Testing and Commissioning of HEPA filter modules in CRCA powder coated finish with provision for DOP & pressure drop measurement suitable for following size filters. |
| 263 | 610 x 610 x 305mm deep |
| 264 | Supply, Installation, Testing and Commissioning of Fire retardant canvass connections with MS Epoxy painted / Al. powdercoated finish angle flanges on both sides |
| 265 | AIR DISTRIBUTION SYSTEM |
| 266 | Supply, Installation, Testing and Commissioning of factory fabricated GSS Ductingas per SMACNA/DW standards withsplitters,bends, elbows, vanes, supports,neoprene of minimum 6mm thick gasket,nuts, bolts angle iron flanges, soildered longitudinal joints ,GI full threaded rodshung to minimum 12 mm dia HILTI make anchor fastner as required and epoxy painted slotted rail supports ,as per the specifications and approved drawings. |
| 267 | 24 G (0.6mm thick) |
| 268 | 22 G (0.8 mm thick) |
| 269 | 20G (1.0mm thick) |
| 270 | Supply, Installation, Testing and Commissioning of Fire retardant canvass connections with MS Eoxy painted / Al powdercoated finish angle flanges on both sides as per the specifications and approved drawings. |
| 271 | INSULATION |
| 272 | Supply, Installation, Testing and Commissioning Thermal Insulation of Supplyair ducting with 19mm thick closed cell elastrometric Nitrile rubber with factory laminated aluminium foil of density minimum 43Kg/m3 and fire perfromance to pass Class 1 as per BS 476 Part 7 & class O as per BS 476 part 6 and use recommended adhesives and finished with 0.05mm thick 3" wide aluminium foil faced self adesive tape at all joints as per the specifications and approved drawings. |
| 273 | Supply, Installation, Testing and Commissioning Thermal Insulation of Supplyair ductingfor Outdoor with 25 mm thick closed cell elastrometric Nitrile rubber withof density minimum 43Kg/m3, antimicrobial with EPA USA approved and fire perfromance to pass Class 1 as per BS 476 Part 7 & class O as per BS 476 part 6 and use recommended adhesives / SR Fevicol 505 grade and covered with 7 mil thick chemically treated woven glass cloth having density 205+/- 10 g/sqm and affixed using synthetic contact adhesive of approved make and protective coating of starbond 30-36 finished with 24G Aluminium cladding for outdoor as per the specifications and approved drawings. |
| 274 | Supply, Installation, Testing and Commissioning Thermal Insulation of Returnair ducting with 13mm thick closed cell elastrometric Nitrile rubber with factory laminated Aluminium foil of density minimum 43Kg/m3 and fire perfromance to pass Class 1 as per BS 476 Part 7 & class O as per BS 476 part 6 and use recommended adhesives and finished with 0.05mm thick 3" wide aluminium foil faced self adesive tape at all joints as per the specifications and approved drawings |
| 275 | Supply, Installation, Testing and Commissioning Thermal Insulation of Return air ductingfor Outdoor with19 mm thick closed cell elastrometric Nitrile rubber withof density minimum 43Kg/m3, antimicrobial with EPA USA approved and fire perfromance to pass Class 1 as per BS 476 Part 7 & class O as per BS 476 part 6 and use recommended adhesives / SR Fevicol 505 grade and covered with 7 mil thick chemically treated woven glass cloth having density 205+/- 10 g/sqm and affixed using synthetic contact adhesive of approved make and protective coating of starbond 30-36 finished with 24G Aluminium cladding for outdoor as per the specifications and approved drawings. |
| 276 | Supply, Installation, Testing and Commissioning of Under deck insulation type of a non fibrous ,closed cell , Elastometric Nitrile Rubber of density 43 kg/m3/ chemically cross- linked polyethylene foam (with class-1 as per BS476 part-I ) of density 33kg/m3 of 19mm thk with factory laminated Alfoil fixed to roof slab using adhesive SR Fevicol505 grade and fastened using GI washers, screws /nylon wire , and joints sealed with tape . |
| 277 | DAMPERS,GRILLES & DIFFUSERS |
| 278 | Supply, Installation, Testing and Commissioning of Opposed type GIVolume Control dampers with matching flanges of sizes as per the approved drawings |
| 279 | Supply and Installationof Fire dampers with fusible links&Eletronic actuators connected to FA system with frame etc. (Dampers should be of wall / duct mounted) as per the specifications and approved drawings. |
| 280 | Supply, Installation, Testing and Commissioningof Extruded Al. Powder coatedReturn air GrillwithAl. Collar Dampers as per the specifications and approved drawings.(Colour to be aproved by dept) |
| 281 | Supply, Installation, Testing and Commissioning of stainless steel (s.s.) 18G (SS316) perforated sheets for HEPA filter modules in all cleanrooms as per the specifications and approved drawings. |
| 282 | Supply, Installation, Testing and Commissioning of weather proof extruded aluminium powder coated fresh air louver of non vision type of Perforated Al net,VCD etc as per the specifications and approved drawings. |
| 283 | Controls |
| 284 | Supply, Installation, Testing and Commissioning of On / off actuator with sensor & also connected to FA panel(Two sets for one damper). |
| 285 | CHILLED WATER PIPING WITH VALVES AND ACCESSORIES: |
| 286 | Supply, Installation, Testing and Commissioning of MS "C" Class as per IS -1239 chilled water pipe with fittings, flanges, valves,reducers ,sockets for probe meter, support hangers with vibration isolation hanger including PUR/PIR inserted self closing insulated single piece pipe supports, including painting ,etc. with insulation of44mm thick for exposed piping with closed cell elastrometric nitrile rubber of density 43 Kg/m3, Thermal conductivity not exceeding 0.035 W/M°K Class 1, fire performance to pass class 1 as per BS 476 part 6& class O as per BS 476 part 7 & use recommended adhesive / SR Fevicol505 gradeand Insulation covered with 7 mil thick chemically treated woven glass cloth having density 205+/- 10 g/sqm and affixed using synthetic contact adhesive of approved make and protective coating of starbond 30-36 finished with 24G Aluminium cladding for outdoor as per the specifications and approved drawings. |
| 287 | Ø150 mm |
| 288 | Ø 125 mm |
| 289 | Ø 100 mm |
| 290 | Ø 80 mm |
| 291 | Supply, Installation, Testing and Commissioning ofbalancing (Manual) with matching flanges , bolt, nuts, insulation and suitable for working pressure of PN16. The insulation covered with treated woven glass fiber reinforced covering & finished with (24G Aluminium cladding for Exposed), all etc., complete as per specifications and approved drawings. |
| 292 | Ø125 mm (For Chiller) |
| 293 | Ø 80 mm(Ahu) |
| 294 | Supply, Installation, Testing and Commissioning ofbutterfly/ isolation valve"s with matching flanges , bolt, nuts, insulation and suitable for working pressure of PN16. The insulation covered with treated woven glass fiber reinforced coveringetc., complete as per specifications and approved drawings. |
| 295 | Ø 125mm |
| 296 | Ø 80 mm |
| 297 | Supply, Installation, Testing and Commissioning of Motorised butterfly valve"s (IP55)with actuator ,mating flanges, bolt, nuts, insulation and suitable for working pressure of PN16. The insulation covered with treated woven glass fiber reinforced covering & finished with 24G Aluminium cladding, all etc., complete as per specifications and approved drawings. |
| 298 | Ø125 mm (chiller) |
| 299 | Ø 100 mm (For Decoupler Line) |
| 300 | Supply, installation, testing & commissioning of 2 - Way MotorisedControl Valve with matching flanges,necessary digitalthermostat And control wiring as per specification and approved drawings. |
| 301 | Ø 80mm |
| 302 | Supply, Installation, Testing and Commissioning off Y Strainers consisting of magnetic screen with insulation & matching flanges suitable for hot water, as per the specifications and approved drawings. |
| 303 | Ø 125mm |
| 304 | Ø 80mm |
| 305 | Supply, Installation, Testing and Commissioning ofNon return valves with matching flanges , bolt, nuts, insulation and suitable for working pressure of PN16. The insulation covered with treated woven glass fiber reinforced covering & finished with 24G Aluminium cladding, all etc., complete as per specifications and approved drawings. . |
| 306 | Ø 125mm |
| 307 | Supply, Installation, Testing and Commissioning of flexible connections(Bellows)suitable for working pressure of PN16.as per the specifications and approved drawings. |
| 308 | Ø 125 mm(for pumps & CHILLER ) |
| 309 | Ø 80 mm(for AHU ) |
| 310 | Gate valve for drain with insulation as per the specifications and approved drawings. |
| 311 | Ø 25 mm |
| 312 | Ø 32 mm |
| 313 | Ø 40 mm |
| 314 | Double float Automatic air vents as per the specifications and approved drawings. |
| 315 | Ø 25 mm |
| 316 | Ø 32mm |
| 317 | Supply & Installation of other accessories: |
| 318 | 6 inch dia dial typethermometers with thermowell and mounting box.as per the specifications and approved drawings. |
| 319 | 6 inch dia dial typepressure gauge with isolating gate valve / cock with insulation (Chillers, Pumps , CSU"s ) as per the specifications and approved drawings. |
| 320 | Supply, Installation, Testing and Commissioning of powder coated GI Cable tray of perforated type 300mm wide with GI cover (both 2mm thick) including suitable powder coated MS supports as per the specifications and approved drawings. |
| 321 | Supply, Installation, Testing and Commissioning of powder coated GI Cable tray of perforated type 150mm wide with GI cover (both 2mm thick) including suitable powder coated MS supports as per the specifications and approved drawings. |
| 322 | CLEAN ROOM INTERNAL FINISHES: |
| 323 | Supply, Installation, Testing and Commissioning of Solid 100 mm thick Double Skin Walkable Ceiling panels(with load bearing 300 kg/m2) made up of 0.8 mm thick GI Precoated Sheet (appliance white colour), Infill material PUF ceiling grid withplexi glass , tacky ment,coving, anti static flooring ,pass bos , air curtain andall accessories as per standards |
| 324 | Supply, Installation, Testing and Commissioning of Solid 80 mm thick Double Skin Clean Room Wall panels made up of 0.8 mm thick GI Precoated sheet (appliance white colour), Infill material PUF with all accessories as per standards |
| 325 | Supply, Installation, Testing and Commissioning of 2mm thick, self levelingconductive vinyl flooring |
| 326 | Supply, Installation, Testing and Commissioning ofwall to floor andwall to ceiling coving |
| 327 | Supply, Installation, Testing and Commissioning of 3-d corner cove pieces |
| 328 | Supply, Installation, Testing and Commissioning of Cutouts for filters, Light fixtures, powersockets, PA System, Smoke detectors |
| 329 | Supply, Installation, Testing and Commissioning of CleanroomcompatibleDoubleLeafDoors 1800(W)x 2100mm (H) as per specification without door closure |
| 330 | Supply, Installation, Testing and Commissioning of Cleanroomcompatible SingleLeafEmergencyDoors 1000(W)x 2100mm (H) as per specification without door closure |
| 331 | Supply, Installation, Testing and Commissioning of Cleanroomcompatible SingleLeafDoors 1000(W)x 2100mm (H) as per specification without door closure |
| 332 | Supply, Installation, Testing and Commissioning of Doubleglazedwindowswith5mmthickglassonbothsidesincluding necssarydoubleadhesivetapes&siliconsealantprovidingin:Internal modular panels of size 900mm x 900mm. |
| 333 | Supply, Installation, Testing and Commissioning of Air shower of CRCA powder coated (size 1.2 m X 1.0 m X 2.85m (H)) |
| 334 | Supply, Installation, Testing of Lockers for personal belongings (20 cubicles) |
| 335 | Supply, Installation, Testing of Garment cubicle of 15 pairs CRCA powder coated |
| 336 | Supply, Installation, Testing of Shoe Rack (size: 1000mm(L) X340 mm (W)X500 mm (H)) |
| 337 | Validation and documentation of the complete facility as per the ISO 14644 Clean Room standardsfor ISO Class 8 "at rest" conditions . This shall include - Air Particulate count using Laser Particle counter, temp & RHchecks, differential pressures,air changes,filter integrity tests,air flow pattern (by VEDIO) ,duct leak test ,by department approved third party.Standard as applicable for Clean Rooms. |
| 338 | FIRST FLOOR-OFFICE-VRF SYSTEM |
| 339 | VRF SYSTEM: |
| 340 | Supply, Installation, Testing and Commissioning of following capacities of Vairable Refrigerant Flow (VRF / VRV)Outdoorcondensingunitcomprising of Invertor SCROLL compressor"s,HeatExchanger,propeller/axialfans,refrigerant Circuit, Safety Devices & Oil Recovery System, operating on R410a refrigerant gas. Necessary Refrigerant Gas and oil charge. Compressor shallbe equipped withinverter controllerof Insulated GateBipolarTransistor(IGBT)typetobeefficient&quiet. The outdoorunitshallhave the multi-step ofcapacity controlto meet load fluctuation and indoor unit individual control. HeatExchangershall beconstructed with copper tubes mechanicallybondedtoaluminiumfinstoformacrossfincoil.Refrigerant Circuit shall include an accumulator, liquid and gas shutoff valves and a solenoid valves. The Outdoor unit shall include the following safety devices : Highpressureswitch,Lowpressureswitch,Fan motorsafety thermostat, Inverter overload protector, Over Current relay, Fusible plugs, Fuses etc . Unit shall be equipped with an oil recovery system to ensure stable operation with long refrigerant piping.The unit shall be prewired in factory for necessary power and control wiring. Alloutdoorsunitsshallbemountedwith necessary vibration isolators ,Completeclampingandsaddlingofcablingworkandrefrigerantpiping . |
| 341 | Outdoor Unit : 16HP |
| 342 | 4 WAY CASSETTE UNITS: |
| 343 | Supply of 4-WAY CASSETTE Typeindoor unit. The housing of the unit shall be powder coated galvanised steel and shall include prefilter, fan section, coil section , fan section with low noisefan with Multi speed motor ,condensate drain pump , Insulation, pipe connections ,allnecessary controls, valves and fittings, strainer, drier , Fresh air intake and Painting as per the client requirement. The fan shall be with Aerodynamicallydesigned diffuserturbofantype. Thecoolingcoil shallbeofseamlesscoppertubesandshallhave aluminiumfins.Unitshallhavefiltercleanabletypeofresinnet fixed to an integrally molded plastic frame. Unit shall have one way supplyairgrillesonsides andreturn airgrillincenter. Unitshall have highlift drain pump, fresh air intake provision, low gas level detectionsystem.Unitshallhaveanelectronicexpansionvalve which control refrigerant flow rate in respond to load variations ofroom. Unittobe provided withmicroprocessor with Wirless Remote controller thermostat as per the specifications and approved drawings. |
| 344 | 4.0TR |
| 345 | Supply, Installation, Testing and CommissioningofHard copper REFRIGERANT PIPING of 16swgvarious sizes with necessary supports, fittings,interconnectingtheliquidandsuctionlinesbetween theaircooled outdoor units and the indoor units. The pipingshallbe carried outof Hard drawn copper pipes oftype "Kwithsoldered /brazedsocketfittings.Isolatingvalvesshallbeprovided to isolate each compressor, strainers, sight glass and any other component requiring proper operation and maintenance. Both thesuctionandliquidlinesshallbeinsulatedwith 19mmthick closedcellinsulationfor above 25mm dia , 13mm thick for pipes below 25mm dia . The insulation finished with treated woven glass fiber reinforced covering and covered with 24G AL cladding for exposed Piping and including making required holes in the wall and re finishing and water tight of holes after laying holes as per the specifications and approved drawings. |
| 346 | Ø 9.5mm |
| 347 | Ø 12.7mm |
| 348 | Ø 15.9mm |
| 349 | Ø 22.2 mm |
| 350 | Ø 28.6 mm |
| 351 | DRAIN: |
| 352 | Supply, Installation, Testing and Commissioning of CPVC (Chlorinated Poly Vinyl Chloride) pipes condensate drain piping insulated using 9 mm thick nitrile rubber tubes including fitting and supports as per specified . |
| 353 | Ø 32 mm |
| 354 | Ø 40 mm |
| 355 | Supply, Installation, Testing and Commissioning of powder coated GI Cable tray of perforated type 300mm wide with GI cover (both 2mm thick) including suitable powder coated MS supports as per the specifications and approved drawings. |
| 356 | Supply, Installation, Testing and Commissioning of powder coated GI Cable tray of perforated type75mm wide with GI cover (both 2mm thick) including suitable powder coated MS supports as per the specifications and approved drawings. |
| 357 | SUBHEAD - POWER WIRING |
| 358 | Supply and fixing of modular type single phase 16A 6pin shuttered type Socket with switch with stainless steel front plate and anodized GI box including all fixing accessories. |
| 359 | Supply and fixing of modular type single phase 16A 6pin shuttered type Socket with switch withfront plate and anodized GI box including all fixing accessories. |
| 360 | Supply and fixing offabricated IP 44 20 A 2p+e Polycarbonate Industiral Plug and socket with bottom MS enclosure and Stainless steel front plate with 20A 2P MCB in including all fixing accessories. |
| 361 | Supply and fixing offabricated IP 44 32 A 2p+e Polycarbonate Industiral Plug and socket with bottom MS enclosure and Stainless steel front plate with 32A 2P MCB in including all fixing accessories. |
| 362 | Supply and fixing offabricated IP 44 20 A 3p+e Polycarbonate Industiral Plug and socket with bottom MS enclosure and Stainless steel front plate with 20A 3P MCB in including all fixing accessories. |
| 363 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed heavy class FRLS PVC conduit as required |
| 364 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 365 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 366 | 4 X 4 sq. mm + 2 X 4 sq. mm earth wire |
| 367 | 4 X 10 sq. mm + 2 X 10 sq. mm earth wire |
| 368 | Supply Installation Testing and commissioning of TPN MCB Double door Distribution boards dust and verminprotected and rated for 415V Three Phase AC supply operation including incoming MCB /ELCB as per specifications and required capacity Neutral bar and Earth terminal complete as required and installed in concealed in wall after necessary chase cutting with finishing/ surface in wall including all fixing materials required. MCBs shall conform to IS : 8828 and ELCB shall conform to IS :12640. All MCBs shall be "C" Curve. DBs shall be provided along with required wire adopter boxes around the DB as required and dummys for spare ways in the DB (No claim shall be allowed for the same). |
| 369 | 4Way TPNMCBDB with 63A, 300mA 4Pole RCBO as incomer and 9 nos 6-25A SPMCBs and 3nos 8KA SP SPDs as outgoings. (PDBs) |
| 370 | Supplying and fixing 8 Way MCB VTPN DB complete with connections, testing and commissioning etc. as required with 160A, 25KA 4Pole MCCB as incomer and 12 nos 16-63A 10KA TPMCBs as outgoingsincluding cable end boxes on top and bottom.. |
| 371 | Supply, testing & commisioning of following size 1.1KV grade XLPE insulated armoured copper conductor cable.The cable shall conform to IS 7098/ Part I. |
| 372 | 3.5C X 35 Sq.mm Copper |
| 373 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. |
| 374 | Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) |
| 375 | Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated andPVC sheathed / XLPEaluminium conductor cable of 1.1kV grade as required. |
| 376 | 3.5C X 35 Sq.mm Copper |
| 377 | SUBHEAD- LIGHTNING PROTECTION |
| 378 | Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. |
| 379 | Supply and laying of following size earth strips including excavation and refilling ofearth when laid inground and with allfixing accessories when laid on the parapet with necessary interconnections with earth stationand equipments. |
| 380 | 50 X 5mm GI Strip laid in Ground |
| 381 | 32 X 5mm Aluminium strip conductor with DMC Insulated Supports |
| 382 | 32 X 5mm Aluminium strip conductor with DMC Insulated Supports & including PCC Blocks. |
| 383 | Supply and installation of vertical air termination with 40mm dia copper hollow sphere with spikes, fixed on 1000mm length 25mm dia Copper rod including PCC block and all fixing accessories. |
| 384 | SUBHEAD-SPECIAL EARTHING |
| 385 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. |
| 386 | Supply and laying of following size earth strips including excavation and refilling ofearth when laid inground and with all fixing accessories when laid on the wall with necessary interconnections with earth stationand equipments. |
| 387 | 25 X 5mm Copper strip with DMC Insulated Supports |
| 388 | 25 X 5mm Copper Strip laid in Ground |
| 389 | 50X5mm GI Strip |
| 390 | Welding using Bi Metallic strips between copper and GI / MS Rod |
| 391 | SUBHEAD-TELEPHONE CONDUITING |
| 392 | Supplying and fixing of following sizes of heavy class FRLS PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 393 | 25 mm |
| 394 | Supply and fixing of Telephone outlet (RJ11) with anodised GI box of withStainless steel front plate and telephone socket |
| 395 | Supply and fixing of LAN outlet (RJ45) with anodised GI box of withStainelss Steel front plate and telephone socket |
| 396 | Supplying and drawing following pair 0.5 sq mm FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 397 | 2 pair |
| 398 | Supply and laying of CAT-6 LAN cable in the in the existing surface/ recessed steel/ PVC conduit as required. |
| 399 | Supply and installation of following size Krone connectors in MS box complete as required. |
| 400 | 10pair |
| 401 | Supply and laying of following size 0.5mm dia Jelly filled copper conductor armoured Cables in ground at 600mm below ground level including excavation, and refilling of earth, laying of cables, providing protection with sand and bricks on topand sides and Telephone cable route markers at every 50mtrs interval complete with including all terminations as required and as directed by Engr-in-charge. The cable shall be as per the DOT specifications. |
| 402 | 20pair |
| 403 | Supply and laying of 80mm dia Class "B" GI pipes laid 750mm below ground level including excavation, back filling etc., complete. |
| 404 | SUBHEAD - FIRE ALARM SYSTEM |
| 405 | Supply, fixing, testing and commissioning of the following number of Loops Microprocessor based analogue addressable type (UL approved) intrinsically safe networkable Fire Control panelwith Zonal Indications, Zener barriers, Signal booster for network connectivity modules with Optic Fiber cable, patch cords and Fiber optic media converters for both sides of the panels along with automatic speech dialer facility and where ever is required and withBattery Power pack as per specifications. |
| 406 | Single loop with loop card |
| 407 | Supply and laying of twisted pair 2.5sq.mm shielded FRLS insulated copper conductor flexible wire through existing MS Conduit. |
| 408 | Supply and fixing of 25mm dia 16SWG MS conduit concealed/ Surface in wall/ Ceiling/ above false ceilingincluding painting with 2 coats of Red colour paint for exposed part and all fixing accessories/ materials |
| 409 | Supply, installation, testing and commissioning of analogue addressable type multi sensor (smoke/ Heat)photo electric detectors with base andLED indication lamp along with all fixing accessories. |
| 410 | Supply, installation, Testing and commissioning of Response indicators with LEDIndication lamp along with all fixing accessories. |
| 411 | Supply, installation, testing and commissioning of AddressablePull type Manual call stations with monitor module with all fixing accessories. |
| 412 | Supply, installation, testing and commissioning of addressableloop sounders with all fixing accessories. |
| 413 | Supply, installation, testing and commissioning of Fault Isolators along with all fixing accessories. |
| 414 | Supply, installation, testing and commissioning of Addressable control modules along with all fixing accessories. |
| 415 | Supply, installation, testing and commissioning of Addressable Monitor module along with all fixing accessories. |
| 416 | Supply, installation, testing and commissioning of Addressable analogue type duct-able smoke detectors for AHU rooms with dual chamber, with all fixing accessories. |
| 417 | Supply, installation, testing and commissioning of weather proof type analogue addressable Manual call pointswith glass and hammer on Stand post made out of 1500 mm long 50x50x6mm Galvanised channel fixed in ground with concrete coping as required. |
| 418 | Supply, installation, testing and commissioning of 8 Way Wago/ Phonix terminal connector in weather proof MS Junctionbox including painting and all installation materials etc as required. |
| 419 | Supply, installation, testing and commissioning of 2.5 Km range Siren with Weather proof motor with 220V 50HZ AC Supply operation with required power contactor, MPCB for control all in a weather proof enclosure near motor including all installation materials as required. |
| 420 | Supply and laying of 3 core 2.5sq.mm Copper conductor PVC insulated armoured cable in built up cable trench/ already laid RCC hume pipe or on cable tray with all installation materials for provison of power supply to Fire Alarm Panel, Repeater Panel, Siren, Exit signage"s, Signalling modules etc complete. |
| 421 | SUBHEAD- WATER COOLERS |
| 422 | Supply, Installation, Testing and Commissioning of Storage Water Coolers with Storage capacity of 80 litres and cooling capacity of 40 litres suitable for operation on 230 V +/- 10%, 50 Hz, full stainless steel body including multi stage RO purification system, 2 kVA voltage stabiliser etc., complete |
| 423 | SUBHEAD- UPS WIRING |
| 424 | Supply and fixing of modular type single phase 2nos 16A/6A6pin shuttered type Socket with switch with stainless steel front plate and anodized GI box including all fixing accessories. |
| 425 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed heavy class FRLS PVC conduit as required |
| 426 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 427 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 428 | 4 X 16 sq. mm + 2 X 16 sq. mm earth wire |
| 429 | Supply Installation Testing and commissioning of TPN MCB Double door Distribution boards dust and verminprotected and rated for 415V Three Phase AC supply operation including incoming MCB /ELCB as per specifications and required capacity Neutral bar and Earth terminal complete as required and installed in concealed in wall after necessary chase cutting with finishing/ surface in wall including all fixing materials required. MCBs shall conform to IS : 8828 and ELCB shall conform to IS :12640. All MCBs shall be "C" Curve. DBs shall be provided along with required wire adopter boxes around the DB as required and dummys for spare ways in the DB (No claim shall be allowed for the same). |
| 430 | 4Way TPNMCBDB with 40A, 10KA 4Pole MCB as incomer and 12 nos 6-25A SPMCBs andas outgoings. (UPSSDBs) |
| 431 | Supplying and fixing4 Way MCB VTPN DB complete with connections, testing and commissioning etc. as required with 125A, 25KA 4Pole MCCB as incomer and 4 nos 40 TPMCBs as outgoings. (UPS OUTPUT DB) |
| 432 | Supply, fixing, testing and commissioning of 125 A, 4 Pole, 25 KA MCCB in an factory made enclosures with all requored accessories etc complete. |
| 433 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. |
| 434 | Supplying and laying 25 mm X 5 mm copper strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50 mm) |
| 435 | SUBHEAD-SHOP ELECTRICS |
| 436 | Supply and fixing offabricated IP 44 32 A 3p+N+e Polycarbonate Industiral Plug and socket with bottom MS enclosure and Stainless steel front plate with 32A 3P MCB in including all fixing accessories. |
| 437 | Supply and fixing offabricated IP 44 63 A 3p+N+e Polycarbonate Industrial Plug and socket with bottom MS enclosure and Stainless steel front plate with 63A 3P MCB in including all fixing accessories. |
| 438 | Supply, fixing, testing and commissioning of 100 A, 4 Pole, 25 KA MCCB in an factory made enclosures with all requored accessories etc complete. |
| 439 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 440 | 4 X 10 sq. mm + 2 X 10 sq. mm earth wire |
| 441 | Supply, testing & commisioning of following size 1.1KV grade XLPE insulated armoured aluminium conductor cable.The cable shall conform to IS 7098/ Part I. |
| 442 | 3.5C X 25 Sq.mm |
| 443 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. |
| 444 | Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) |
| 445 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated andPVC sheathed / XLPEaluminium conductor cable of 1.1kV grade as required. |
| 446 | 3.5C X 25 Sq.mm |
| 447 | Supply and fixing of following HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461, Steel wire mesh cable trays with internal dimensions & load bearing capacities as given below,including couplers, mounting accessories withincluding all fixing accessories and including 2runs of 25x5mm GI strip along with cable tray etc., complete as required. |
| 448 | 150mm x 54mm |
| 449 | Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. |
| 450 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 451 | SUBHEAD- ROADS/HARDSTANDING & DRAINS : |
| 452 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. |
| 453 | Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m in all kinds of soils. |
| 454 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge. |
| 455 | Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. |
| 456 | 40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. |
| 457 | Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom.With rapid setting bitumen emulsion. On W.B.M / W.M.M. @ 0.4kg/Sqm. |
| 458 | Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface, including rolling and finishing with road roller all complete. |
| 459 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 460 | Dry stone pitching 22.5 cm thick laid in courses and required profile with hammer dressed stones having no side less than 15 cm, with minimum depth of 20 cm including preparing the bedding surface etc. all complete. |
| 461 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc., complete. |
| 462 | 150 mm dia. R.C.C. pipe |
| 463 | 300 mm dia. R.C.C. pipe |
| 464 | 450 mm dia. R.C.C. pipe |
| 465 | SUB HEAD-EXTERNAL POWER SUPPLY |
| 466 | Supply, Transportation, Installation and Commissioning of 11 KV, 630A, 25 KA Outdoor type Load Break Switch as detailed below with suitable CC foundation and 2 Nos GI pipe earthing with brick masonry chambers etc complete for finished item of work.a) Load break switch: 11KV,630A, 25 KA with fuse trip, earth switch, manually operated spring charged mechanism with 2 no + 2 NC.b) HT HRC fuse up to 63A - 3 nos. c) Bus bar connection. d) Indication lamps. e) Manual trip Push button. |
| 467 | Supply, Transportation, Installation, Testing and Commissioning of 160 KVA TRANSFORMER with all test reports. The Transformer shall be designed and manufactured as per IS:1180 OCTC with level-II with initial filling of oil as per IS 335-1993. The basic details of the Transformer are as under. 1. Quantity : 1 |
| 468 | 2. Rated KVA : 160 KVA |
| 469 | 3. Service & Location: Continuous Outdoor |
| 470 | Distribution Transformer |
| 471 | 4. Mounting : Plinth. |
| 472 | 5. Wound : Copper Double wound |
| 473 | 6. Type : Core type oil immersed |
| 474 | 7. Cooling : ONAN |
| 475 | 8. Temp Rise : 40°C in oil, 45°C by resistance |
| 476 | 9. Vector Group: Dyn 11 |
| 477 | 10. Primary Connection : Delta |
| 478 | 11. Nominal Voltage / Current : ______ |
| 479 | 12. Highest system Voltage: 12000V |
| 480 | 13. Primary Frequency :50 HZ +/- 3% |
| 481 | 14. Number of Phases : 3 |
| 482 | 15. Primary wires: 3 |
| 483 | 16. Secondary connection : Star |
| 484 | 17. Secondary Volts / Current : 433V |
| 485 | 18. Secondary phases : 3 |
| 486 | 19. Secondary wires: 4 |
| 487 | 20. Taps on primary winding for primary voltage |
| 488 | variation : +5% to - 10% in steps of 2.5% of 7 |
| 489 | position (6 Steps) |
| 490 | 21. Terminal arrangement. |
| 491 | a.HV: HT terminal box as per the site |
| 492 | condition. |
| 493 | b. LV: Cable box suitable to receive ---------- |
| 494 | 22. LV:One separate terminal for earthing. |
| 495 | 23. Total Losses at 50% Loading - |
| 496 | as per IS |
| 497 | 24. Total Losses at 100% Loading [ |
| 498 | as per IS |
| 499 | 25.Percentage Impedance at 75 deg. C at |
| 500 | as per IS |
| 501 | 26. No Load current: Less than 2% of full load |
| 502 | current. |
| 503 | 27. Standard Fittings & Accessories. |
| 504 | a. Rating and terminal marking plate: One |
| 505 | b. Lifting Lugs: Two |
| 506 | c. Off-circuit tap switch :One |
| 507 | d. Earthing Terminals :Two |
| 508 | e. Radiators ( Attachable) |
| 509 | :Adequate |
| 510 | f. Explosion vent with Diaphragm :One |
| 511 | g. Conservator with Drain plug: one |
| 512 | h. Oil filling hole with cap :One |
| 513 | i. Oil level indicator : One |
| 514 | j. Dehydrating Silica gel Breather : One |
| 515 | k. Terminal Arrangement: HV With Terminal |
| 516 | Box |
| 517 | l. Terminal Arrangement : LV Cable Box |
| 518 | m. Separate Neutral Bushing : One |
| 519 | n. Filter valve with blanking plate : One |
| 520 | o. Drain cum filter valve with blanking plate |
| 521 | : One |
| 522 | p. Air release device : One |
| 523 | q. Thermometer Pocket : One |
| 524 | r. Four :Unidirectional flat rollers |
| 525 | s. One :10Cm dial thermometer(Rigid stem |
| 526 | type) |
| 527 | 160 KVA Copper Wound Transformer |
| 528 | Supply, testing and commissioning of HT cable of size 3Cx 70 Sqmm as per IS standard. The cable shall conform to IS7098/ Part I. |
| 529 | Laying of one number PVC insulated and PVC sheathed / XLPE"power cable of 11 KV grade of following size direct in ground"including excavation, sand cushioning, protective covering and"refilling the trench etc as required. |
| 530 | Upto 120 sq. mm |
| 531 | supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required |
| 532 | 70 Sqmm |
| 533 | Main PCC panel |
| 534 | Supply, installation, Testing andCommissioning of 3 phase and Neutral415V 4 wire Free Standing Floor mountedMV panel made out of 2mm thick CRCA/Galvanised steel enclosurefor main frame and 1.6mm thick partitions andafter seven tank process and painting with Epoxy powder coating. The panel shall consist of suitable ratingTPN Aluminium busbar (at the rating of 0.8A/Sq.mm) supported with DMC/ SMCbarriers and color coded with Heat shrinkable sleeves. The Metering shall beprovided as specified. The panel shall have Short circuit withstanding capacity of minimum 50KA and consist of the switchgear as mentioned below. Indoor panels shall have IP-4X degree of protection wiith external door . Enclosure shall be modular with bolted design. Enclosure shall be powder coated with RAL-7035 coat with matt finish. Design ambient temperature shall be 50 degree centrigrade. No use of hygroscopic material like FRP/Hylam/Bakellite sheet inside the panel for partitions or any other purpose.( As per SLD and Technical specifications ) |
| 535 | The PCC shall have at least twospare cubicles. The size of all Panel Mounting Meters shall be 96X96mm. The Panels shall be mounted on U channels including supply and fixing of the same. . All MCCB/ACBs of rating 160Aand above shall be with Micro processor releases All MCCBs below 160A shall be with adjustable thermal magnetic based releases. All MCCBs shall be with spreader links and rotary handle. All MCCBs shall be over load & short circuit releases withIcu=100% Ics. All CTs/CBCT shall be resin cast type. All Controlling wiring shall be FRLS cables, all the bus bar sleeves shall be Heat shrinkable kits.Panels shall have form 4b/form 3b construction as per the requirement. |
| 536 | For MCCB with Microprocessor based release : A common indication LED for internal temp/ fault/alarm . MCCB should have in-built feature of logical selectivity by which it can give a time delay of 50msec between upstream and downstream MCCB The microprocessor based release should have the following settings: • Overload Settings: 0.4 to 1 times of Ir • Short Circuit Settings: 1.25 to 10 times of Ir. • Earth fault Settings: 0.2 to 1 times of In. • Neutral protection settings: 0 – 50% – 100%Ir. • Manually closing mechanism should be accommodated in a Moulded housing of robust and vermin-proof construction. • MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open) • The tripping devices shall be ambient temperature compensated type. The insulating case shall be made of high strength heat resistant and flame retardant thermosetting insulating material. |
| 537 | Incoming : |
| 538 | Supply of 400A Adjustable, having Breaking Capacity400A 4 Pole MCCB, 35/36KA KA with micro processer based releases with O/C, S/C & EF protection |
| 539 | Busbars :400A TPN Aluminiumbusbars - 1 set |
| 540 | (Neutral shall be 100% Phase busbar) |
| 541 | Outgoings : |
| 542 | 320A 35KA FP MCCB – 1no ( Chiller ) |
| 543 | 11KW Star delta /DOL Feeder with Type II Coordination MCCB, Contactor, OLR, SPP, ON/OFF Push Button, ON/OFF/TRIP Indication Lamps, Auto/Manual Selector Switch with Ammeter & CTs (AHU Feeder) - 2Set |
| 544 | 3KW DOL Feeder with Type II Coordination MpCB, Contactor, SPP, ON/OFF Push Button, ON/OFF/TRIP Indication Lamps, Auto/Manual Selector Switch with Ammeter & CTs (Primary Chilled Water Pumps) - 1Sets |
| 545 | 7.5KW DOL Feeder with Type II Coordination MpCB, Contactor, SPP, ON/OFF Push Button, ON/OFF/TRIP Indication Lamps, Auto/Manual Selector Switch with Ammeter & CTs (Secondary Chilled Water Pumps) - 1Sets |
| 546 | 2.7KW DOL Feeder with Type II Coordination MpCB, Contactor, SPP, ON/OFF Push Button, ON/OFF/TRIP Indication Lamps, Auto/Manual Selector Switch with Ammeter & CTs (Pressurisation set) - 1Set |
| 547 | 15KW Star delta /DOL Feeder with Type II Coordination MCCB, Contactor, OLR, SPP, ON/OFF Push Button, ON/OFF/TRIP Indication Lamps, Auto/Manual Selector Switch with Ammeter & CTs (Calorifier) - 1Set |
| 548 | 0.6KW DOL Feeder with Type II Coordination MpCB, Contactor, SPP, ON/OFF Push Button, ON/OFF/TRIP Indication Lamps, Auto/Manual Selector Switch with Ammeter & CTs (Hot water pumps) - 2Set |
| 549 | 160A 25KA FP MCCB – 1nos ( VTPN ) |
| 550 | 100A 25KA FP MCCB – 2nos ( Equipment ) |
| 551 | 125A 25KA FP MCCB – 2nos ( UPS Inputs ) |
| 552 | 40A 10KA FP MCB – 2nos ( LDBs ) |
| 553 | 63A 10KA FP MCB – 3Nos ( PDB-2Nos,VRF ODU-1 No.) |
| 554 | Metering : |
| 555 | 0-500V Digital Voltmeter withselector switch and Fuses - 1 set |
| 556 | 0-400A Digital Ammeter with CTs ofratio 400/5A,Class 1 Accuracy and15VA burden and selector switch - 1set |
| 557 | LED Phase indication lamps with individuals Fuses and control withtoggle switches- 2sets |
| 558 | CT Operated Load Manager with RS 485 port ( Similar to EM-6400) – 1set |
| 559 | APFC unit |
| 560 | 160A 25KA FP MCCB – 1nos |
| 561 | Busbars :160A TPN Aluminiumbusbars - 1 set |
| 562 | Automatic Power factor controller with 10 channel for controlling the capacitor bank |
| 563 | Outgoings |
| 564 | 25 KVAR MD type Capacitor bank - 2nos |
| 565 | 10 KVAR MD type Capacitor bank - 1no |
| 566 | 5 KVAR MD type Capacitor bank - 2nos |
| 567 | 63A, 3P, 10KA MCB - 2Nos |
| 568 | 70 A contactor - 2nos |
| 569 | 40A, 3P, 10KA MCB - 1 No |
| 570 | 40 A contactor - 1 no |
| 571 | 32A, 3P, 10KA MCB - 2 Nos |
| 572 | 40 A contactor - 2 nos |
| 573 | SUBSTATION ACCESSORIES |
| 574 | Supply and laying of 2.0mm thick 3.3KV Rubber Mats as per IS 15652 of size1000mm x2000mm |
| 575 | Supply and erecting 4.5KG Carbon Dioxide (CO2) Fire Extiguisher with necessary clamps made from 50 x 6mm M.S. Flat with Nut & Bolts growted in wall complete. |
| 576 | Providing printed instruction chart both in English, Hindi and local launguage and duly framed with front glasses, for treatment of person suffering from Electric shock. |
| 577 | Supply and Fixing of Laminated SLD-A1size |
| 578 | Providing pair of rubber hand gloves suitable for working on 11 KV |
| 579 | Supply, testingand commissioning of following size 1.1KV grade XLPE insulatedarmoured aluminium conductor cable.The cable shall conform to IS 7098/ Part I. |
| 580 | 4C X6 Sq.mm |
| 581 | 4C X10 Sq.mm |
| 582 | 4C X16 Sq.mm |
| 583 | 3.5C X120 Sq.mm |
| 584 | 3.5C X240 Sq.mm |
| 585 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 586 | Upto 35 sq. mm |
| 587 | Above 95 sq. mm and upto 185 sq. mm |
| 588 | Above 185 sq. mm and upto 400 sq. mm |
| 589 | Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required |
| 590 | Above 95 sq. mm and upto 185 sq. mm |
| 591 | Laying of one number PVC insulated and PVC sheathed I XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUMEI METAL pipe as required. |
| 592 | Above 95 sq. mm and upto 185 sq. mm |
| 593 | Supplying and making end termination with brass compression gland and aluminium lugs for followingsize of PVCinsulatedandPVCsheathed /XLPE aluminium conductor cable of 1.1kV grade as required. |
| 594 | 4C X6 Sq.mm |
| 595 | 4C X10 Sq.mm |
| 596 | 4C X16 Sq.mm |
| 597 | 3.5C X120 Sq.mm |
| 598 | 3.5C X240 Sq.mm |
| 599 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. |
| 600 | Supplying and laying 25 mm X 5 mm copper strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50 mm) |
| 601 | SUBHEAD-SEWAGE DISPOSAL : |
| 602 | Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m in All kinds of soils. |
| 603 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. |
| 604 | SWR PIPES |
| 605 | Providing, laying and jointingSWR Pipes conform to IS:13592-1992 of Type-B on sand cushion at bottom and around the pipw and testing of joints etc. complete : |
| 606 | 100 mm dia SWR Single Socket |
| 607 | 150 mm dia SWR Single Socket |
| 608 | Providing and fixing square-mouthSWR gully trap conform to IS:13592-1992 complete with brick masonry chamber around as per standard design : |
| 609 | 100x100 mm SWRGully trap with Sewer bricks conforming to IS : 13592-1992. |
| 610 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : |
| 611 | Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), With Sewer bricks conforming to IS : 4885. |
| 612 | Extra for depth for manholes : |
| 613 | Size 90x80 cm, With Sewer bricks conforming to IS : 4885 |
| 614 | Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design, With 20x20 mm square bar. |
| 615 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design, With common burnt clay F.P.S. (non modular) bricks of class designation 3.5. |
| 616 | SUBHEAD - AREA LIGHTING |
| 617 | Supply and erection of steel stepped and swaged tubler poles of 9mtr. Long (410 SP25) (1.5mtr below Ground) with base plate, earthing studs,1.5Mtr out reach single arm, FRP terminal box, 2nos 50mm diaclass B GI Pipe, 1.5mtr. Long for incoming and outgoings cables, including PCC Pedestal complete with painting with black bitumin paint inside the coping for embedded portion andtwo coats of Zinc chromate primer and two coats of Aluminium paint externally for length above the ground. The pole shall be with Junction box consisting of MCB. The wiring from Junction box to Light fixture shall be carried out with 3core 2.5sq.mm multistrand conductor cable. The Pole shall be fixed with 72W LED Lamp with fixture including supply of Controlgear/driver and lamp(Philips : BRP410 LED CW 072 MR FG S1 PSU GR ) |
| 618 | Supply, testing & commisioning of following size 1.1KV grade XLPE insulated armoured aluminium conductor cable.The cable shall conform to IS 7098/ Part I. |
| 619 | 4Core 6 sq.mm |
| 620 | Laying of one number PVC insulated and PVC sheathed I XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. |
| 621 | Up to 35Sq.mm |
| 622 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUMEI METAL pipe as required. |
| 623 | Upto 35 sq. mm |
| 624 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated andPVC sheathed IXLPEaluminium conductor cable of 1.1kV grade as required. |
| 625 | 4Core 6 sq.mm |
| 626 | Providing Spiral coil earthing with 8 SWG GI wire including spreading of salt and charcoal as per IS 3043/87 with latest amendments. |
| 627 | Supply and laying of following dia. NP2 grade RCC hume pipes with collars for road crossings, laid 750mmbelow ground level including excavation,back filling etc., complete. |
| 628 | 150mm dia. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
