|
| 1 | Demolition of Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified & directed. |
| 2 | M&L for 10mm thick Light shade vitrified ceramic tiles in floors,not exceeding 0.36 sqm, set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. |
| 3 | M&L for 10mm thick Light shade vitrified ceramic tiles in skirtings/ vertical surfaces,not exceeding 0.36 sqm, set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. |
| 4 | M&L for 18 mm thick Granite (of any type) tiles of approved shade/ design machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed. |
| 5 | M&L for 18 mm thick Granite (of any type) tilesof approved shade/ design machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed. |
| 6 | M&L for 16 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed. |
| 7 | M&L for non skid ceramic coloured tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 8 | M&Lfor glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles complete all as specified and directed. Note: The size of tiles (except thickness) may be varied during execution without any price adjustment. |
| 9 | Dismantling of floor, hearth, walls, roof tiles including bedding (but not backing), and rubbish off permises complete all as specified and directed. |
| 10 | M&L for Rendering 10 mm thick in cement mortar 1 : 4for fixing of wall tiles complete all as specified and directed. |
| 11 | M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring average 25 mm thick surface finished even andrough (as in levelling course) to receive the topping layer complete all as specified and directed. |
| 12 | M&L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6for laying of floor tiles complete all as specified and directed. |
| 13 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm longfasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing withselected quality glass.(Note: The unit rate quoted by contractor includes cost of glass and panel and includes all other connected accessories) |
| 14 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor includes cost of glass and includes all other connected accessories.) (Area not exceeding 2.00 sqm) |
| 15 | Providing and fixing factory made uPVC white colour fixed or louvered window/ ventilator made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profileOnevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick,galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor includes cost of glass and includes all other connected accessories) (Area not exceeding 1 sqm each) |
| 16 | Taking down chowkhat or frames exc 1.50 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed |
| 17 | Taking down chowkhat or frames n exc 1.50 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed |
| 18 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube in opening as per specification and shown on drawing SSR Part-II 2020 complete all as specified and directed. |
| 19 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement , as per specification and shown on drawing in SSR Part-II 2020 complete all as specified and directed. |
| 20 | S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed. |
| 21 | S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed. |
| 22 | S&F 100 mm dia extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 23 | S&F 7mm thick aluminium grills of make \"Decogrill\" model DG 104 surrounded by aluminium \"C\" channel with mesh size 99 X 105 mm complete all as specified & directed. |
| 24 | Dismantling of Wooden Wall Panelling with base plywood work incl all hardware items and removing to store complete all as specified and directed. |
| 25 | M&L Plywood, grade BWR, type BB, 12 mm thickness in first layer for making the base for second layer for panelling fixed with nails to timber framework complete all as specified and directed. |
| 26 | M&L Plywood, grade BWR, type BB, 12 mm thickness in second layer for making the base for Wooden panelling fixed with screws complete all as specified and directed. |
| 27 | M&L Decorated choice Sunmica Layer 1 mm thick for wall panelling complete all as specified and directed. |
| 28 | M&L Wooden lining top border of size 35 mm x 50 mm all along the Wall Panelling complete all as specified and directed. |
| 29 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 30 | M&L for Brick work with fly ash bricks straight or curved on plan exceeding 6 m mean radius complete built in cement mortar 1:6 complete all as specified and directed. |
| 31 | M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed. |
| 32 | Taking down cement plaster on brick or concrete surface including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 33 | M&L for Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified and directed. |
| 34 | M&L for applying 2mm thick Birla / JK Putty in two layers on newly plastered walls surfaces making absolutely even and smooth, rubbing with sand paper complete all as specified and directed. |
| 35 | M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed. |
| 36 | M&L for applying two coats of oil bound distemper on wall or concrete surfaces on prepared surfaces including, rubbing with sand paper complete all as specified and directed. |
| 37 | M&L preparation of old painted surfaces and applying one coat of white wash but on ceiling complete all as specified and as directed. |
| 38 | M&L applying two coats of acrylic exterior weather proof emulsion paint over a coat of exterior primer on newly plastered wall surfaces/ old decorated wall surfaces, in case of old decorated wall surfaces includes complete removal of existing wall finish of any type with wire brush, brooming, dusting & finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc complete all as specified and directed. |
| 39 | S&F in repair Stainless steel fancy type curtain rod 25 mm dia as approved complete all as specified and directed |
| 40 | S&F in repair SS Curtain rodBracket fancy type for curtain rod 25 mm dia of any colour as approved complete all as specified and directed. |
| 41 | S&F in repairs 18/19 mm thick high density PVC/ WPC solid fibre board with prelaminated PVC sheet as Cupboard and frame/ Shutters including taking down the old cupboard shutters and removing to store complete all as specified and directed. |
| 42 | S&F Aluminium/ Stainless Steel continuous (piano) hinges of width of flaps (when open) 40 mm complete all as specified and directed. |
| 43 | S&F magnetic catcher catcher with nut and screw of mild steel bright finish complete all as specified & directed. |
| 44 | S&F 100 mm dia extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 45 | S&F Three layered Rotational moulded polyethylenewater storage tank (cylindrical vertical with closed top) 1000 litre capacity hoisted and fixed in position including dismantling of old u/s water tank and removing to store complete all as specified & directed. |
| 46 | S&F Ball valves for 20 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed. |
| 47 | Taking up or down steel tubing and connections including cleaning if refixingrequired for 15 mm bore of pipe complete all as specified and directed. |
| 48 | Taking up or down steel tubing and connections including cleaning if refixingrequired for 20 mm bore of pipe complete all as specified and directed. |
| 49 | S & F 15 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified and directed. |
| 50 | S & F 20 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified and directed. |
| 51 | Making connection of PPR distrubtion bracnch with PPR main of following outer dia of pipe 16 to 40mm size by providing and fixing tee including cutting and making fusion joint etc complete all as specified and directed. |
| 52 | S&F in repair PP-R globe or gate valvesscrewed both ends for PPR Pipes of 20 mmbore dia of pipe complete all as specified and directed. |
| 53 | S&F in repair PP-R globe or gate valvesscrewed both ends for PPR Pipes of 25 mmbore dia of pipe complete all as specified and directed. |
| 54 | M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in Bricks/ stone Masonary wall complete all as specified and directed. |
| 55 | Taking down eaves gutters and rain water pipes of any size or pattern including all fittings etc complete all as specified and directed. |
| 56 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed. |
| 57 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 58 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed. |
| 59 | S&F PVC (SWR) pipes 75 mm bore Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 60 | S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 61 | S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 62 | S&F PVC(SWR) bends, any radius of 110 mm bore complete all as specified and directed. |
| 63 | S&F PVC(SWR) bends, any radius of 75 mm bore complete all as specified and directed. |
| 64 | S&F Stack clamps made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110 mm PVC pipe complete all as specified and directed. |
| 65 | S&F Stack clamps made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 75 mm PVC pipe complete all as specified and directed. |
| 66 | S & F in repair Europian WC floor mounted cascade pattern vitreous china with dual core flushing cistern incl all fitting flush pipe etccomplete all as specified & directed. |
| 67 | S & F in repair Soap dish any type fixed to plug with chromoium plated brass screw complete all as specified & directed. |
| 68 | S & F in repairs Hand shower (Health faucet) with 1 mtr long Easy flex tube in crome finish & wall hook complete all as specified & directed. |
| 69 | S & F in repair 125 mm dia chromium plated shower rose ofwith or without swivel joint incl fixing to steel pipe complete all as specified and directed. |
| 70 | S & F in repair Brass chromium plated wall mixer non-telephonic shower arrangement with connecting legs & wall flanges for 15 mm bore of pipe complete all as specified & directed. |
| 71 | S&F in repairChromoium plated angular stop cock for 15 mm bore complete all as specified & directed. |
| 72 | S&F in repairChromoium platedTwo-way angular stop cock for 15 mm bore complete all as specified & directed. |
| 73 | S&F in repair PVC connection 15 mm bore, 450 mm long complete with both ends unions complete all as specified and directed. |
| 74 | S & F in repair Brass chromium platedCentral hole Basin mixer without pop-up waste system with 450 mm long braided hoses complete all as specified & directed. |
| 75 | M&L 75 mm thick PCC 1:3:6 type C-1 using 20mm graded aggregate as in plinth protectionfinishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and directed. |
| 76 | Demolition of Reinforced Cement Concrete inof any description and in any position not otherwise specifically provided for complete all as specified & directed. |
| 77 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as speified and directed. |
| 78 | M&L for pre cast cement concrete 1:1.5:3, type A-1, using 20mm graded stone aggregateas in cover slabs (for manholes etc) and similar articles with plain faces, set in CM 1:4 complete all as specified and directed. |
| 79 | S&F in repair 75mm PVC (SWR) floor trap, plain with grating,jointing with solvent cement as per site requrement complete all as specified & directed. |
| 80 | M&L Vitreous china wash basin, white,flat back, size 550 x 400 mmincluding supply & fixing of brass chromium plated coupling 32 mm etc complete all as specified and directed. |
| 81 | S&F in repairChromoium plated Bib cock with flanges Quarter turn 15 mm bore complete all as specified & directed. |
| 82 | S & F in repair Bottle trap chromium plated for WHB as per approved quality complete all as specified & directed. |
| 83 | S & F in repair Looking mirror of size 0.45 m X 0.60 m of 5.5 mm thickness selected quality glassmounted on wall with chromium plated brass screws complete all as specified and directed. |
| 84 | S & F in repair Toilet Paper Holder with Flapcomplete all as specified & directed. |
| 85 | S&F in repairSingle door PVC cabinet mirror of size 300 mm x 450 mm with internal shelves complete all as specified & directed. |
| 86 | S & F in repair sheetGlass Shelf assembly consisting of 5.5 mm glass sheet shelf 12 cm wide with cromium plated bracket guard and railing 60 cm long complete all as specified and directed.. |
| 87 | S&F Chromium plated Towel ring with bracket complete all as specified & directed. |
| 88 | S&F LDPE pipe 50mm of pressure rating 6Kgf/sqcm fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 89 | M&L Cutting holes in existing concrete treads, supply and fixing in repairs stainless steel of grade 304 in railing of approved pattern using square/ rectangular/ circular hollow sections, fixing with adequate support from bottom and side walls, making good the holes with PCC 1:2:4 including necessary fabrication, finishing the joints etc complete all as specified and directed. |
| 90 | S&F Pre- painted galvalume aluminum zinc corrugated steel based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed. |
| 91 | Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings including ridges complete all as specified and directed. |
| 92 | M&L for Fe 410-W (Gde E-250 quality A) Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 93 | M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 94 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. |
| 95 | M&L Water proofing treatment on \"Non approachable / non accessible and approachable roof\" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment,properly cleaning & drying the concrete surfaces complete all as specified & directed. Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm |
| 96 | All as per item No 95 above, but Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces complete all as specified and directed. |
| 97 | All as per item No 95 above, butLaying evenly over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction complete all as specified and directed. |
| 98 | All as per item No 95 above, but Applying two coats of bituminous aluminium paintincluding preparation complete all as specified and directed. |
| 99 | M&L for PCC 1:2:4 type B0 (Using 12.50mm gradedstone aggregate) in roof padding/ kerbs/ sunken slab etc complete all as specified and directed. |
| 100 | M&L10 mm thick rendering on roof surfaces/ concrete surface in CM 1:4 with liquid water proofing compound @ 200 ml per 50 Kg cement complete all as specified and directed. (Waterproofing compound should be measured and paid separately). |
| 101 | Supply only water proofing compound (liquid), ISI marked complete all as specified and directed. |
| 102 | M&L for hard core of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 103 | M&L for 100 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as sub base of floor complete all as specified and directed. |
| 104 | M&L for 10 mm thick heavy duty exterior designer tiles of size 300 mm x 300 mm as in floor set, jointed in neat cement slurry and pointed with grey cement and pigment complete all as specified and directed. |
| 105 | M&L forscreed bed or bedding layer of mortar 15 mm thick in CM 1:4for laying floor finishes complete all as specified and directed. |
| 106 | Taking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixture and fittings suchasswitches,ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 107 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN Dbs/TPN DBs/ Main switch including old unserviceable MCCBs/ MCBs isolators etc and making good to disturbed surface all as specified and directed at site complete all as specified and directed. |
| 108 | Taking down care fully copper/ aluminium sub main wiring of any size from surface / concealed / esisrting conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed |
| 109 | M&L for point wiring with 1.5 Sqmm signle core PVC insulated unsheathed copper FRLSH multi stranded copper conductor cable in and including concealed PVC conduit of size 20/25 MM ISI marked inclusive of tees, bend, elbows etc upto and including GI sunk boxes of size 1.2 mm thick and 60mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switch/ socket of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sqmm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal incuding cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by ENgr-in-Charge for One light point controlled by one , one way switch 5 Amp |
| 110 | All as per item No 109 above but One exhaust fan point controflled by one, one way switch 5 Amps and regulator |
| 111 | All as per item No 109 above but One 3 pin 5 Amps Switch socket outlet point controlled by one switch on the same board |
| 112 | All as per item No 109 above but One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board |
| 113 | M&L for point wiring with 1.5 Sqmm signle core PVC insulated unsheathed copper FRLSH multi stranded copper conductor cable in and including PVC casing caping/ PVC pipe of size 20/25 MM ISI marked inclusive of tees, bend, elbows etc upto and including GI sunk boxes of size 1.2 mm thick and 60mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switch/ socket of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sqmm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal incuding cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by ENgr-in-Charge for One fan point controlled by one , one way switch 5 Amp and regulator. |
| 114 | Description all as per tiem NO 4 here in before but using 2.5 Sqmm single core copper conductor cable of multistranded flame retardent PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combition point including necessary running of 2.5 Sqmm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 115 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 116 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 117 | M&L Modular switch 1 way 6A, 1 module, 230 volts complete all as specified and directed. |
| 118 | M&L Modular Socket outlet 2 in 1, 6 pin6 Amp 2 moduleISI marked, complete all as specified and directed. |
| 119 | M&L for modular Switch socket outlet multipurpose 3 pin, 15 amp and one pin, 5 amp controlled by one switchcomplete all as specified and directed. |
| 120 | M&L for modular Fan step regulator, 120W - 2 module, 230 volts complete all as specified and directed. |
| 121 | M&L for modular Switch socket outlet 3 pin 5 amp\" flush type 220 volts complete all as specified and directed. |
| 122 | S&F in repairs for modular socket outlet 6A/16A - 2/3 pin combined 2 module, complete all as specified and directed. |
| 123 | M&L for Sheet metal enclosure factory made double door for mounting MCBs with 200A rated bus bar Scapacity SPN 8 way AC 240 Volts with IP-43 protection,complete all as specified and directed. |
| 124 | M&L for Ceiling rose 3 terminals of PVC/ polycarbonate, as per relevant IS code, ISI marked isolated body complete all as specified and directed. |
| 125 | Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less\"than 1.5 meters below normal ground level, connected to galvanised iron earth lead wire of 4 mm dia GI pipe mediam grade 15 mm dia upto 7.5 mtr including provn of conrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 kg/sqm) and frame of angle iron 25x25x3 mm with lugs 02 Nos and with 6.0 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for earth plate, common sald and charcoal filing, test point made out of Bronze/ Gun metal with fixing arrangement, funnel, wire mess and excavation/ earthwork in hard/ dense soil, to a distance not exceeding 50 mtr all as per electrical plate No 3 of SSR 2010 Part I and connecting to earth test point all as specified or indicated incl testing on completion. |
| 126 | S&F in replacement of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed |
| 127 | Submain wiring with two single core 1.5 Sqmm size stranded copper conductor PVC insulated unsheathedcable FRLS in and incl PVC rigid non metalic conduit concealed/ surface type and one PVC cable of 1.0 Sqmm size solid copper conductor PVC insulated andunsheathed for continous earth wire with junction boxes covered with laminated sheet 3 mm thick and other accessories complete all as specified and directed. |
| 128 | Submain wiring with two single core 4.0 Sqmm size stranded copper conductor PVC insulated unsheathedcable FRLS in and incl PVC rigid non metalic conduit concealed/ surface type and one PVC cable of 2.5 Sqmm size solid copper conductor PVC insulated andunsheathed for continous earth wire with junction boxes covered with laminated sheet 3 mm thick and other accessories complete all as specified and directed. |
| 129 | Submain wiring with two single core 10.0 Sqmm size stranded copper conductor PVC insulated unsheathedcable FRLS in and incl PVC rigid non metalic conduit concealed/ surface type and one PVC cable of 6.0 Sqmm size solid copper conductor PVC insulated andunsheathed for continous earth wire with junction boxes covered with laminated sheet 3 mm thick and other accessories complete all as specified and directed. |
| 130 | Supply and fixing amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of 5 to 32 Amps SP and current carrying capacity in the MCB DB complete with connection testing andcommissioning complete all as specified and directed. |
| 131 | Supply and fixing amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of capacity 40 to63 Amp SPN 240 Volts and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 132 | Material labour for laying of concealed PVC conduit of size 20/25 MM ISI marked inclusive of tees, bend, elbows for one telephone socket point alongwith for RJ-11 telephone socket with transparent shutter 1 module alongwith fulsh metal box 1 module and front cover plate 1 module complete all as specified and directed. |
| 133 | Material labourfor laying of concealed PVC conduit of size 20/25 MM ISI marked inclusive of tees, bend, elbows for one TV socket point alongwithTV socket 1 module alongwith fulsh metal box 1 module and front cover plate 1 module complete all as specified and directed. |
| 134 | S&F in repairs ceiling recess lights with ultra bright compact 5 W LED down lighter with high efficiency LEDs complete all as specified and directed. |
| 135 | S&F ceiling recess LED lights with capacity 12 Watts low depth aluminium heat sink downlighter of with PC diffuser in white powder coated finish with integral electronic low THD LED driver complete all as specified and directed. |
| 136 | S&F in replacement of VTPN suitable for flush mounting/surface mounting with 250A copper busbar for each phae with 2 neutral bar, 2 earthba and cable ties for cable management fully insulated busbar and shrouded neutral bars with reversible door for IP 43 & IP 54 DBs with provision for MCCB 160Amp as incommer and SP/TP MCB\"s as outgoing complete all as specified and directed. |
| 137 | S&F MCCB 100 A FP, 16 KA , 415 Volts, 50Hz complete all as specified and directed |
| 138 | Taking down ceiling fan of any sweep, keeping with safe custody and refixing the same with replacement of unsv 3 core PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose and Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust including over hauling the fan complete all as specified and directed |
